Final cut export edl and cinema tools database.  at last,  imort  to color.

final cut pro 7.0.3 and color 1.5.3
final cut edit prores clip with Log and transfer,export edl and cinema tools generate database. at last, imort to color.
but in Color,all files alway offline,the short name is Aux.Why?

I succeed to do it ago.But now it fail.Why?

Similar Messages

  • Final Cut, MOTU Ultralite and voiceover tool

    I've got an Ultralite firewire unit that works perfectly fine with Ableton and the system in general. I've got my System audio set to the Ultralite and it works fine. (I get great microphone levels in the system audio preferences.) However, its dead in FCP. I've got the source and inputs in the voiceover tool set properly -- it even works when I try the built in mic on the laptop, but goes dead when I switch to the MOTU. Last detail... audio playback thru the MOTU is fine; its just recording is dead.
    Any help would be greatly appreciated.

    Alright I'm not 100% sure about this, but I believe that FCP uses what is set in Audio MIDI Setup.
    To check go to Applications > Utilities > Audio Midi Setup
    There you will see the Default Input settings. Make sure that the Ultralite is set there, and also Audio Input in the bottom left
    Then open FCP and check

  • Hello- I have final cut pro X and final cut studio.  Should Compressor 3.5.3 work with fcpX.  Whne I try to export to it aI am told I must go to i-apps and buy compressor.

    Hello- I have final cut pro X and final cut studio.  Should Compressor 3.5.3 work with fcpX.  When I try to export to it aI am told I must go to i-apps and buy compressor.

    No, FCP X will only work with Compressor 4.

  • Final Cut Pro x and Compressor 992 hour to process

    I edited a 1 hour-40 minute video, on Final Cut Pro X and processed using Apple's Compressor.
    I have tried different Operating Systems (Mavericks and Mountain Lion) on two different Mac Computers.
    IMac 2.8 Mhz and Mac Book Pro (both 2008)
    It has been transcoding to create video to run on Apple Devices, for over 6 days now, and it shows that it will take 992 hours to process.
    The same video, some months back, with Mountain Lion, took a couple of days to process.
    Question: Why is it taking this long now?
    I have tried to get a DVD done, different types of output; none have succeeded.
    I guess Apple, has made adjustments to their Operating Systems, to basically render this computers inoperable, forcing customers to buy their latest Mac models.
    Yes, I went to the "Genius Bar" at Apple (twice), first they told me to increase the memory, which I did; even though months ago I had videos processed without extra memory.
    The second time at the "Genius Bar", after I had installed extra memory, they had nothing to say, except that "they had a friend" with the same problem, but after "the friend" bought a new Mac, the problem was resolved.
    I called Apple support and was told to "reset PRAM", which I did. Still the problem persists.
    Any ideas?
    http://www.flickr.com/photos/brankoab/12089286396/

    You don't mention how much RAM is in your machines, nor what are the versions of FCP X and the OS.
    These can make a lot of difference. If you are trying a long export with very little RAM (and I must say 4GB is *very little* RAM), then it can get bogged down tremendously. Do you have at least 8GB?
    How much free RAM is reported in Activity Monitor?
    Are you using Mavericks or a previous version of the OS? Mountain Lion was notorious for slowing down to a crawl in such circumstances.
    Give us more info, so we can better help.
    In the meantime, you might consider exporting just a small section of the movie (use I and O to mark an in and an out point in the timeline) and see how fast it goes; keep Activity Monitor open while you are doing it.

  • Question about Final Cut Pro X and miniDV's

    Hi,
    I'm thinking in buying Final Cut Pro X and use it to import and edit many hours of footage that I have on miniDV's tapes.
    I've heard that to work with miniDV's, Final Cut Pro X is not great, especially regarding timecode, etc. True?
    Any thoughts and advises? Many thanks!

    My experience is if you're shooting SD then you shouldn't have a problem unless you are trying to load a full hour. When I tried that, the computer went crazy and loaded the video as thousands of clips just a few frames long.
    That was supposed to be for a multicam shoot. I went back to FCP 7 where I've never had a single problem after at least 80 multicam projects with as many as eight cameras.
    I'll have to try it again in FCP X now that there have been two updates since my last try.
    I've also used HDV mini DV tapes shot with a Canon HV40. The video looked great in FCP X and I had no problem with clips that were 2-3 minutes long.
    I did not load my HDV clips as ProRes in FCP X because, when I did try it, they looked like total crap. I was afraid my finished exported video would also look like that.

  • How can I make Final cut pro 7 and Yosemite work?

    Hi dear Apple.
    I have this huge problem with Final cut pro 7 and Yosemite.
    I have tried to install it on a Mac book pro that has Yosemite but it doesn't work.
    I have an I mac with finalcut pro 7 working on Lion but I need to upgrade it to Yosemite to be able to use CC Adobe.
    I have a feature film worth 6,7 million SEK with Final cut pro 7 and I can't translate it to XML files to premiere cause it is in its last editing process. I get an error everytime I try. Also the last version of Fcp (X) ***** for a professional editor. So.. My only option is to finish this film in Fcp7.
    How can I use Yosemite and still be able to keep Fcp7?
    Please help me or do something about this issue soon. I bought fcp7 for 11000 SEK at the time that was quite expensive. 

    Hi Meg the dog! Thanx for answering!
    I know it was left to die 4 years ago. I just think its ****** up.. I work with documentaries and it takes quite a while to finish. I have done one for 6 years now. If I had known that Fcp7 was left to die I would never had started to edit 6 years ago...
    I did try this recommended on the forum by another user:
    Go to the app location in finder, CTRL click on the app and choose [Show Package Contents]. A folder [Contents] appears, click on it and choose [MacOS]. You'll see a Unix executable. Double click, you'll start Terminal. At the same time fcp will launch. After fcp is launched, close terminal and confirm when asked. Now fcp is up and running. Close fcp and the next time, just open fcp the normal way. DONE!
    But it doesn't work for me. I can't launch fcp7.
    I have Fcp7 Installed on my I mac and I wonder if that will effect fcp7 if I upgrade to Yosemte?
    I tryed to export XML to work on premiere and this is what happends:
    Any recommendations? I am going crazy here..

  • I need to burn a Final Cut pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn one just using Final Cut Pro? and can I go through IDVD?

    I need to burn a Final Cut Pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn a project just using Final Cut Pro? and can I go through IDVD? ( oh and how can I finalize the project?) Thanks!

    I did that already it it only burned one section of the project. How do I export a master file? Can i just save it on the computer then take it to IDVD? Thank you so much for helping me!

  • Final Cut Pro performance and license use.

    Hi,
    I'm new to this discussion forum and I have a few questions. Hopefully this is the right thread. I was unsure whether I should have broken the questions into two threads. Nevertheless:
    1) I'm planning on getting a MacBook Pro and know that performance wise it is still below a Mac Pro. Does Final Cut Studio 2, and its applications, mainly FCP run fairly well on a MBP?
    2) I also plan to get Final Cut Studio 2. My dad already has a MBP (early 09 one) and I want to run FCS2 on it first before I get my MBP. I know Apple has the EULA where I can only install FCS2 on one desktop and one laptop. If I get my MBP, can I remove FCS2 from my dads laptop and install it again on my new MBP?
    I'm just lost regarding MBP's performance and FCS2's installation.
    Thanks a lot.

    I used FCP on my macbook pro, I had 4 GB of RAM and intel core duo 2.6, and it was sluggish like crazy, not to mention the render times for effects. If you can, I highly recommend getting a Mac Pro. Whatever you choose to do, you can simply migrate all of your applications with the migration tool and it will install it on your new computer with your already in use serial number, and then you can uninstall it on your current computer.

  • I am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

    i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

    I believe there is no  "Export to Tape"  feature as appeared in legacy FCP.
    SORRY! Just noticed you are using FCP 6.
    You need to ask this question in the Final Cut Studio forum.
    Message was edited by: Ian R. Brown

  • Final Cut Export Jumps Every 5 Seconds

    Hi - I'm using Final Cut 7.0 and my sequence plays fine within Final Cut but when I export it, the video sort of slows down/jumps about every 5 seconds. I've tried a few different export formats (.mov,.m2v) and same problem. I've sent it directly to Compressor and when I preview it in Compressor it's already jumping. Anyone know why this is happening and how I can fix it?
    Thanks!

    Just to try to narrow this down, I would export the video using current settings, then import that back into FCP. Put that back on your timeline and see if it plays smoothly or skips in FCP.
    ...if it still skips then that's strange. If FCP can play the original sequence then it should be able to export a video that doesn't skip. The test above will test if the exported video is encoded with the skips or if for some reason, the quicktime player that you use to play it back in is causing the skips.
    If the imported video skips, I would start to look at your render settings. You might have done this already but I would manually render the entire timeline before exporting.

  • Final Cut Studio 2 and video app chaos

    Hi,
    Did anyone find after installing Final Cut Studio 2 that their 3rd party apps to do with video extraction/conversion suddenly start to unexpectedly quit when in operation? It's a brand new MacPro, lovely machine until Final Cut software went and messed things up. I won't mention the trouble I had to install both Logic Studio and FCS since they both share similar components and included apps, Apple's installer is not designed to cope and I had to mess about with the receipts folder to get both installed. This page was available yesterday http://support.apple.com/kb/TS1110?locale=en_GB to give an insight of the problems between the two. Anyhow, I think the best solution is to remove Final Cut software as I'm not up for spending hours debugging.

    I had a huge issue pop up with me too...and I figured the best way was to wipe the drive, install the OS and FCP from scratch. Took a day, but better than spending more time trying to figure things out.
    Shane

  • Final Cut Studio 2 and Logic Studio on MacBook

    I have a white MacBook bought in late 2008. It has a 2.1 GHz Intel Core 2 Duo processor w/ 1 GB 667 MHz DDR2 SDRAM.
    My question is: has anyone run Final Cut Studio 2 and/or Logic Pro with these specs? And how was it?
    I was told performance would be weak. I was also told nothing could be done to improve the performance other than buy a MacPro or at the very least get a MacBookPro. I have no reason NOT to believe this but I am interested in a second opinion.

    Hi there,
    Ignore the other posts, both run absolutely fine on a macbook! I use final cut studio 2 on a white macbook and so do about 10 of my friends almost without problem. Final cut works perfectly, dvd sp works perfectly, motion works perfectly, soundtrackpro works perfectly! the only problem i ever had was rendering with 'color', none of my other friends grade their videos so they have no problems at all. Are you going to do any grading?
    I believe the macbook is not officially supported though, so I don't think you'll be able to get help from apple if there's any problem solving to be done. I've been using FCP and FCS for years now though and have honestly never had a problem I couldn't solve myself
    Logic also runs amazingly well too.
    hope that helps

  • Final Cut Studio 2 and Canon hv20

    I'm currently working on Final Cut Studio 2 and I'm looking at buying a Canon HV20. I've looked into some threads on this one and it seems that people are having trouble with this camera on FC Studio 2. Is there anyone out there that can attest to smooth and efficient workflow with this set up? A major selling point for me is the 24p, tell me it works well, please tell me it works well.
    thank you,
    t r e y v o n

    HV20 works perfectly at 24p in FCP 6.0.2.
    Added advantage is that you can capture uncompressed (with HDMI card and fast drive/RAID) at much higher quality and resolution than HDV.
    Quality is so good, you can create great 1920 x 1080 24p green screen shots (using 4:2:2 color space from HDMI) and dvMatte Pro 3.
    The next step up to get better quality at 24p is around $5K-$6K range (I think?).
    Here's a small image of a 24p frame shot on green screen with the HV20:
    http://www.ecophones.com/embed/printplace.jpg

  • Final cut studio 2 and macbook pro 17?

    I'm anxious to purchase Final Cut Studio 2, and a new MacBook Pro 17" laptop. Is FCS2 and this laptop 100% compatible? Will I be able to install and run FCS2 on this laptop successfully?
    Laptop specs:
    MacBook Pro 17" Notebook 2.33 GHz Intel Core 2 Duo, 3 GB RAM, 160 GB Hard Drive, TI Mobility Radeon X1600 graphics processor, dual -ink DVI support, 256MB of GDDR3 SDRAM, external 500G hard drive for video storage (firewire 800).
    MacBook Pro 17"   Mac OS X (10.4.9)  

    Well those that have tried running FCS 2 on a 17" laptop can't talk. It's not released yet...
    However there is no reason why it shouldn't work well. Add an Io HD to the mix, and you'll edit HD on it all day long... we were showing this in the AJA booth at NAB a couple of weeks ago. Apple was running it too on laptops in their booth...
    Figure it should be fine. With the advent of Pro Res, there's little you couldn't edit on a MBP... however there are some things you'll not be editing with it, such as 2 k files, or uncompressed HD. Pro res takes care of that though. It's really visually lossless.
    Jerry

  • Final Cut Studio 2 and avc-intra

    I am using Final Cut Studio 2 and am having trouble with .mxf files. I downloaded the avc-intra decoder drive from Panasonics site and a majority of the files ended 3/4 of the way through with sever audio noise at the end. I sent the drive back to the cameraman to see if he had better luck, turns out he did... Though I saw that he was using Final Cut Studio 3 and the quicktime files he provided back were formatted as AVC-Intra 100M...which is neither playable in quicktime or editable in Final Cut Studio 2.
    What am I missing? Time to upgrade? What can I do in the meantime.
    Thanks for the ideas!

    Well, you can't use the file he sent unless you upgrade. But if you get the card dumps back, you should be able to LOG AND TRANSFER to ProRes on your system fine. Or was that the issue? They had garbage at the end?
    Trashing preferences fixes a lot of FCP oddities.
    Shane

Maybe you are looking for

  • How do I encrypt an unencrypted site?

    When I try to go on a site that I have frequently visited, it just keeps loading and never gets to the site. I tried looking at the identity information and found that the problem was because it was not encrypted. I don't know why it has worked befor

  • HT4528 I dropped my iPhone 4 and its blue wont do anything

    It's blue and black it makes noises but u can't see anything it rings but its blue and black help me

  • Deleting Album Art Work

    I recently added some album art to some songs. I actually want to change the art I put on a song/group of songs/album. How can I do this i have tried numerous things and nothing. When i drag in a new piece of art into the window at the bottom left it

  • Restore last view setting not working in version XI

    When reopening documents the new version XI, Adobe keeps opening my documents on page one. Though I have gone to preferences\documents and checked the box for restoring last view setting when reopening documents. Is this a bug that needs fixing? I al

  • HT2693 Having issues with siri thru my nolan ncom bluetooth kit 2.1

    I am having issues with siri thru my nolan ncom bluetooth kit 2.1. It allow me to connect to siri, but siri never responds.  I hear the 2 beeps, i say what I need siri to do , but the light around the microphone continues to spin and siri usually tim