Final Cut Express 4.0.1 How do I convert MP4 to a usable format without loosing quality

If you shoot in one of the following modes you should be able to Log & Transfer directly into FCE:
HD: 1920x1080/60i (FX or FH mode)
HD: 1440x1080/60i (HQ or LP mode)
SD: 720x480/60i
1080/60p (PS mode) seems to be the default mode in your camcorder. FCE only supports progressive video in 720p50 or 720p60. That's probably why you have had to import via iMovie.
It would be better to upgrade to Final Cut Pro X, the version currently supported. FCE was discontinued over 18 months ago and is not supported on Lion or Mountain Lion.

Similar Messages

PAL-authored Final Cut Express project...how to burn to DVD for NTSC audien

Not sure if this is possible...and through searching a few previous posts it sounds like it may require additional software...but what the heck, thought I'd ask anyway ! I operate in UK and have made several FCE movies for friends in the UK which I've burnt onto a DVD and sent to them as gifts. Now I want to do the same for a friend in the States, and I'm wondering how to go about the PAL>>NTSC issue. Would it be easiest to just take the PAL-dvd and pay somebody at Jessops etc to convert it onto a NTSC dvd for me? I don't mind paying a few quid for someone else to do it, especially if it would require me to go out and buy all kinds of software to be able to do it myself... But I'm worried about how the picture files, music, titling, special effects etc would come out. Anybody have any experience with this? Thanks.

Not sure if this is possible...and through searching
a few previous posts it sounds like it may require
additional software...but what the heck, thought I'd
ask anyway ! I operate in UK and have made several
FCE movies for friends in the UK which I've burnt
onto a DVD and sent to them as gifts. Now I want to
do the same for a friend in the States, and I'm
wondering how to go about the PAL>>NTSC issue. Would
it be easiest to just take the PAL-dvd and pay
somebody at Jessops etc to convert it onto a NTSC dvd
for me? I don't mind paying a few quid for someone
else to do it, especially if it would require me to
go out and buy all kinds of software to be able to do
it myself... But I'm worried about how the picture
files, music, titling, special effects etc would come
out. Anybody have any experience with this? Thanks.
Toast 7.x is able to burn a PAL-project on a NTSC-dvd. In the preferences of Toast you can decide wether the output will be a PAL- or a NTSC-dvd.
For friends in Brazil I burned a NTSC-dvd, but I still don't know if it works!
Give it a try on a dvd-rw.
iMac G5 2GHz & Powerbook 12 1.25GHz Mac OS X (10.4.4)

How can i convert CR2 images into jpg format, without iPhoto?

i just import a lot of images with the format .CR2 to mac through "Image capture" is there an app to convert the frmat into .jpg, app like image capture or something like that?

If Canons software doesn't work...?
Try Snap Converter, File Juicer or Contenta Converter

Flip Video on Final Cut Express

How do i get HD video files shot on my flip video camera to play in final cut express? It doesn't seem that FCE is recognizing the video format created by flip video.
Any suggestions?
Thanks.

Hi David,
here's a link to a really good explanation complete with a short video - it's for the Kodak Zi8 but should work the same for whatever you're using.
http://www.reelsocialmedia.com/2010/01/how-to-use-the-zi8-with-final-cut-express /
Key seems to be the file import settings. I'm still experimenting with my Zi8 and these.
Hope this helps you
Best
JC

HT2948 I have a Sony DCR-PC100 is it supported by final cut express?? wilth

I have a Soney DCR-PC100 is it supported by final cut express ?? what 'p' will they convert to??

Hi
Just my notes - for iMovie - but they go to 99% for FinalCut too.
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Final Cut Express -- AVCHD Format

Does Final Cut Express support AVCHD? I am aware that iMovie'08 supports this format but I am hoping to get more robust functions in Final Cut Express. Thanks

ThanksIan!

Final cut express: Importing

I use iShowU HD to record videos, then import into Final cut express 4 HD.
Every time I import any footage into Final cut express, wherever it came from, it always converts it into SD.
I record my videos in 720p.
Please help!
Picture of my recording settings:
mrrbatty

This may help:
https://discussions.apple.com/message/21042176#21042176
Al

I'm running Final Cut Express 2. How can I move entire project and application from one internal hard drive to another? Ran out of space on one drive. Thanks.

I'm running Final Cut Express 2. My video project is 95% done and I've run out of space on my 500g internal hard drive. How can I (1) move the complete FCE program and video to my unused 250g internal hard drive and operate it from there and (2) how do I then purge all the FCE info from the 500g drive without losing anything from the 250 drive?
Also, is it possible to change the aspect ratio from 4:3 to 16:9 when the project is finished? If so, how? I now know this all should have been done before I started. Thanks for the help.

1. You can't move the application. It must remain on the system drive. Move your capture scratch folder to the external FireWire drive and use the reconnect function in the project.
2. What's the media 16:9 or 4:3?

I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am

I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am? I need them and don't want naturally to buy them again!!!
Thank you

Assuming you purchased QT Pro, you can always download it again at no extra charge by logging in to your Apple account.
Regarding FCE, there is no way to download & install the product. You need an original FCE install disk and your FCE serial number.
Final Cut Pro X (aka FCPX) can be purchased & downloaded from the App Store.

How can I use Final Cut Express in a Mac Pro

I want to know how could I use my Final Cut Express HD programm (Version 3) in my new Mac Pro.

FCE 3.0 was not designed to work with Intel based Macs when they were introduced years ago so you have no chance with a modern Mac.
You must upgrade to FCE 4 unless you want to move onto Final Cut Pro X which is designed to be used with the latest technology.
Final Cut Studio 3 will also work OK.

I run Final Cut Express 4.0.1; I shoot with a Sony HDR-CX260V. How do I import from the camera directly to Final Cut, without having to go through the intermediate step of using iMovie?

I use Final Cut Express 4.0.1; I shoot with a Sony HDR-CX260V.
How do I import from camera to Final Cut without going through the intermediate step of using iMovie?

If you shoot in one of the following modes you should be able to Log & Transfer directly into FCE:
HD: 1920x1080/60i (FX or FH mode)
HD: 1440x1080/60i (HQ or LP mode)
SD: 720x480/60i
1080/60p (PS mode) seems to be the default mode in your camcorder. FCE only supports progressive video in 720p50 or 720p60. That's probably why you have had to import via iMovie.
It would be better to upgrade to Final Cut Pro X, the version currently supported. FCE was discontinued over 18 months ago and is not supported on Lion or Mountain Lion.

Xacti HD and Final Cut Express -- It used to work great! How do I go back?

I have a Sanyo Xacti HD700. It gives me 1280x720 MPEG-4 AVC/H.264 files, which my Mac just loves. I used to be able to quickly edit the clips together in Final Cut Express, export using complementary QuickTime settings (specifically, those recommended by Vimeo for HD playback), and get beautiful MP4 files, relatively quickly.
Then, one day, a friend needed me to edit a quick video using a DV camcorder. It was confusing as heck getting the footage into FCE, and not particularly elegant getting it out. But, the project was done overnight, I washed my hands of it, and wanted to get back to making beautiful MP4 files again, relatively quickly.
Except I can't! Now, for one, encoding takes hours. Hours! My source videos and export videos are very similar, yet I sit and watch as the estimate for completion actually goes up for an hour before slowly coming back down.
And frankly, that would be fine, except now my exported videos are the wrong size. They include letterboxes, and the video itself is squished, stretched. So I wait four times as long for a ghastly video. The best I could do is use the Quicktime export settings to "crop off" the letterboxing, but there's still some black bars and it's just not the same.
Here's how my videos used to look:
http://vimeo.com/1067235
Here's how an exported video looks now:
http://vimeo.com/1655414?pg=embed&sec=1655414
What happened? Out of the box, everything worked perfectly. Now, tainted with actual tape, Final Cut Express seems like it's running my videos through six extra wringers and giving me clips worse than I'd get just cut-and-paste editing the Xacti files in QuickTime Pro!
I Googled my brains out, and all I've learned is, if I had Final Cut Pro, "Project Settings" would have all the switches I need. Well, I don't have FCP, just FCE.
Somewhere, something was set that I want to unset. Can anyone help? Do I have to delete every trace of FCE and just reinstall?
Mahalo for any advice!

It sounds like you didn't change the settings after you made the DV video. Did you switch it back to 1280x720 and make a new sequence in that format? Check item properties for the sequence you edited. What does it say? Also check item properties for any media you captured since working in DV.

How do I open my Final Cut Express 4.0 files in Final Cut Pro 10.1.3?

Hello,
I used Final Cut Pro when I was in college and when I graduated in 2010, I bought Final Cut Express 4.0. I recently bought Final Cut Pro 10.1.3 two days ago and I am having trouble opening up my old Final Cut Express 4.0 files. When I do go to open up these files they only open up with Final Cut Express and I always get the message: file's format is too new for this version of the application.
How do I open these Final Cut Express 4.0 files in Final Cut Pro 10.1.3?
Thank you!
Anna

TThere is no way to go directly from FCE to FCPX. If you know somehow who has FCP7, they can open the FCE projects and export XML files. These can be converted to FCPX XML format using the 7toX utility.

How do I import an AVI file for use with FInal Cut Express

How do I import or use an AVI file with Final Cut Express?
Thank you. Do I need to convert my AVI file and what is the
easiest way to do that? Thank you.

You should convert the media to QuickTime. Without knowing any specifics most likely the simplest way is to use MPEG Streamclip.

Sorry I'm new to Final Cut Express. How do you make an image (jpeg file for example) move across the screen slowly as I've seen in many films.

Sorry I'm new to Final Cut Express. How do you make an image (jpeg file for example) move across the screen slowly as I've seen in many films.

Neil from bristol wrote:
… How do you make an image … move across the screen …
by setting KEYFRAMES
(read, what FC/e's built-in Help-feature tells about it)
resize and set pic to start position
set keyframe
move playhead in timeline to desired length
set pic to end position
set keyframe …

Final Cut Express 4.0.1 How do I convert MP4 to a usable format without loosing quality

Similar Messages

Maybe you are looking for