Final Cut Express (4.0.1) keeps on freezing (not responding) when i import files (pics). Have force quit 3 times already. Also rebooted Mac. Any help please?

Frustrating experience with Final Cut Express 4.0.1 today. Started a new project. Imports pics, but every now and then FCE freezes and I have to force quite. Any advice please. Thanks

CMYK is a colour system used by specialized publishing businesses so unless you have got your pictures directly from one of these sources they are unlikely to be CMYK.
If the pictures have been produced by you they are likely to be the normal RGB.
To check, ctrl click on an original picture and in the Get Info window check the colour specs.
As you can see this one is RGB.
Click image to enlarge for clarity.

Similar Messages

When I do log and transfer in final cut pro 7 from external hard it will not responding, and i will force quit from final cut, plz help!!

When I do log and transfer in final cut pro 7 from external hard it will not responding,
and i will do force quit from final cut, plz help!!
i have alot work to do plllllllllz help

Hi. Your FCP7 question should be posted in this forum. https://discussions.apple.com/community/professional_applications/final_cut_stud io
Good luck.
Russ

HT201210 Iphone 3gs needs to restore as cannot turn phone on but cannot restore as unknown error 2001 keeps coming up. I have tried several times on different computers. Any help or ideas?

Iphone 3gs needs to restore as I cannot turn phone on but cannot restore as unknown error 2001 keeps coming up.
I have tried several times on different computers. Any help or ideas? Thanks

Hi there Katherine,
I have an article here that addresses this error code and can give you a few more troubleshooting suggestions for this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Final Cut Express 3.5 on 10.5.8 not capturing or importing video

I bought FCE with my Mac Pro in 2006, but never used it because iMovie HD 6 did everything I needed. Now, it looks like my HD 6 is having some serious problems and I can't find support or a replacement. So, I whipped out my FCE ver 3.5 and install it on my 2006 Mac Pro, now running 10.5.8... everything went fine, except I cant capture video from my Canon Vixia HV30, nor can I import .m4v or .mov files??? Any suggestions would be appreciated. Thanks a bunch!

HDV cameras can be a bit tricky as FCE can see them as two different cameras ie. DV or HDV.
FCE must be setup to receive one or the other.
If you shot HDV and are outputting HDV then use the 1440x 1080i Easy Setup.
There is a 50 and 60 choice corresponding to PAL or NTSC respectively.
Note: If you change an Easy Setup you need to create a New Project/Sequence.
Changing the Easy Setup only affects new not existing.
Al

My iTunes keeps freezing/not responding when I open the program?

I am trying to restore my mum's iPod nano after it just died and won't work- but everytime I open iTunes it crashes! It works for about 1 minute of use before it stops responding and I have to end task, but then when I try and re-open the program it doesn't open unless I plug my own iPod in!
Someone help me try and fix this- mum wants her iPod back and I want my iTunes working again!
My computer operating system is Windows 7
iTunes is the latest update (I think). Any solutions?

I tookyour suggestion and SUCCESS! I can now access the Itunes Store. A simple fix, and thanks so much!!.
Below is the advice you forwarded:
I found a solution to my problem.
> start menu
> accessories,
> right click on the command prompt icon and choose "run as administrator".
Once it opens, type in the following command...
netsh winsock reset
hit enter
You should get a message that the winsock reset successful and you will need to reboot your computer.
Reboot and when I reloaded itunes the store loaded fine.
Thanks again, -Dean Stoneburner

Flash keeps 'not responding' when exporting .swf & file WAY too big

Hello!
I am creating an animation using ActionScript2 on Flash Professional CS5 and whenever I try to export (or even test) my animation, the progress bar comes up but the progress does not move. Then after about a second the dreaded '(not responding)' appears at the top of the window and if you click anywhere it greys out closes it.
If I leave it it doesn't export for ages (liteally like 3-6 minutes which is long for just exporting).
It only has 280 frames and the .fla file so far is 9.96MB! Other animations I have made have had double the frames yet 5 times smaller a file.
I have cleaned my registry many times (I thought that might be the problem or something).
I DO NOT UNDERSTAND! PLZ HELP!
Jerome

Bump

I just bought a new Gateway desktop comeputer that runs windows 8 and I keep getting Firefox not responding when trying to view websites.

My internet connection is good, so why is Firefox not responding?

This problem can be caused by pages that use Flash media. Here is some standard guidance that addresses the most common reasons for Flash problems in Firefox. I'm sure you've seen some of it before, but just in case:
(1) If you have installed any recorders/downloaders that interact with Flash media, make sure they are as up-to-date as possible, or disable them.
(2) Disable hardware graphics acceleration in Firefox and in Flash
(A) In Firefox, un-check the box here and restart:
orange Firefox button (or Tools menu) > Options > Advanced > General > "Use hardware acceleration when available"
(B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
(3) Disable protected mode
See this support article from Adobe under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]

I keep getting "Page Not Responding" when signing in to eBay with Safari 6.0.1

I have tried clearing ebay cookies and clearing the cache, but I can't seem to get eBay back. However, the eBay toolbar plugin is still working. Any ideas, please? Should I cahnge the proxy settings?

Try restarting your Mac.

Why does Firefox keep on saying not responding when playing games a on Facebook and on other wesites that has to do with Facebook?

it is very slow

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

Final Cut Express BLEEEEEEEP! (ITS DRIVING ME NUTS!!)

OK, so i got final cut express last night, and it works fine apart from when I import a clip I get a message saying unrendered - which pecks my head so much - but I found a way to get past that but when im past and it and I play the video all i get is a BLEEP BLEEP BLEEP as the audio. I imported the clip from Photo Booth (does that make a difference?) i saw one thread about a bleeping noise on here but the guy had imported a song; not a video... is it becasue photo booth records audio in an un-compatible format with FCE? please please help I'm begging you!

They're not at all. FCE is a DV and HD only editing application. Nor does it support AAC. Look at item properties for your sequence. That's what your media has to be. You can probably use MPEG Streamclip to convert it to the correct format.

Final Cut Express 4 keeps crashing while exporting large project

I have an Imac and I'm using final cut express 4. I keep having a problem when exporting project to quicktime conversion for youtube. The software just keeps crashing and giving me an error. I normally only have this proble with projects that have alot of editing or just long files. Sometimes it crashes and then ends up going thru without crashing but I can't seem to get it to work this time. The project I'm trying to export is about 20 minutes. Please help me.
Imac hardware info:
Model Name:          iMac
Model Identifier:          iMac7,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          1 GB
Bus Speed:          800 MHz

It's not clear to me what you're describing about the upload process. It could be a problem of YT's uploader.
trakaddict wrote:
My final mov. file is 6 GB does that have anything to do with it?
Possibly. If you follow YT's guidelines for a 1080 res video @ 8 Mbps, your file should be more like 1.2 GB.
Your AIC sequence shoud be exported from FCE with current settings. That means it's still an AIC file when you bring that into MPEG Streamclip. Choose Export to Quick Time and in the dialogue window choose h.264 as your compresssion. Check the Limit Data Rate and enter 8000. If your video is interlaced, check the de-interlaced box.
Good luck.
Russ

Which camera to get for Final Cut Express 3.5HD/ upgrade to FCE 4?

Hello everyone!
I know this has been discussed frequently, but i am sort of looking for a costum made solution for me
Following situation: Macbook, 2.16Ghz, 2GB Ram, 320GB HDD @ 5400rpm.
I am running 10.5.3, have Final Cut Express 3.5 installed and am used to work in it,
mainly for editing video files not coming from a camcorder.
I have some experience in SD miniDV recording/editing though.
NOW I was thinking of getting a new camcorder in the 1500$ max range.
I want to edit video files, sometimes burn DVDs, at other times only to have them on the mac.
What i like about some of these new HD consumer models they can record AVCHD and mpeg2 SD in DVD quality. That should allow me to record in mpeg2 and have less hassle with importing/converting into Final Cut Express 3.5 if lower quality is fine (which it is as of now)
At the same time I could upgrade to Final Cut Express 4 and import the AVCHD files, but I still taken aback from how time and resource consuming it is. Plus it does not allow full HD 1920x1080 in FCE 4 does it?
So I was looking at the Sony HDR SR11 as a nice camcorder. Seen it live, seems decent.
On the other hand, is a camera which records in HDV a better solution for me?
I could keep Final Cut 3.5, no need to upgrade right?
Is it less hassle to transfer files to the mac and edit them?
I am very unsure which way to go right now...

Hi Flore
This a huge debate. There are very few advantages to the new AVCHD camera's and the vgery long list of negative aspects of AVCHD camera's outweighs any usefulness of them. They are designed for Grandad to pick up and shoot good quality pictures and not for editing.
I have posted below the wiki address for AVCHD, please read the page. It is very important you do read it. It explains in depth about AVCHD.
I feel the is no real place for the hard drive based AVCHD camera. There is a place for a mini-dv tape based camera.
Life will be very hard if you go the Hard-drive camera route. Stay with tape.
Tape is cheap, hardy and easy to move around. Hard drives not so!!!
Take some time to read the following wikipedia page...PLEASE READ THIS PAGE!!!
http://en.wikipedia.org/wiki/AVCHD
You will see that AVCHD is not all the bee's knee's.
I personally hope it dies an extremly painful agonising drawnout death.
AVCHD has no place in the professional domain.
Justin... Durban.. South Africa

I try to open Final Cut Express it asks to choose an Easy Setup. Help!

After recently insatlling Final Cut Version 2.0.2, I tryed to open the application
but it asked to choose an Easy Setup and re-install. I already deleted the
program but i have no idea what an Easy Setup is or what to do next! Someone please HELP ME!!!
Mac G5 Mac OS X (10.4.3)
Mac G5 Mac OS X (10.4.3)

to allow final cut express hd (3.01) to run as "any user" (in our case we are having users login with AD integration) and NOT have the issue of "At least 1 easy setup file..."
do the following:
login as admin
make "system" owner the folder (and all contained):
/Library/Application Support/Final Cut Express Support/Custom Settings
resolves the issue. it appears when FCE HD is installed as admin and run for the first time, the Custom Settings folder is created with the Easy Setup file installed - BUT it is owned by "admin". when anyone (other than admin - or an admin) logs in, they cannot access that folder and therefor cannot get to the easy setup file.
i tested this and it works. for any OS X users with a lab, FCE HD out there, this is the fix. hope it keeps a few people from pulling their hair out like me.
g4 powerbook 12" Mac OS X (10.4.4)

Does final cut express 4.0 work in new macbook bought in Oct 2013

I bought Final Cut Express 4.0 in 2008 and recently I bought a new MacBook Pro 15" around Oct 2013 and updated to Mavericks 10.9. I copied all the contents and apps from the old macbook to the new one and when using the Final Cut Express, it asked me for the serial number and when I tried to add it, it says serial not valid. What can I do to be able to use my Final Cut Express? Please any suggetions?

Three thoughts,
1. It is usually better to re-install pro apps (like FCE) from scratch instead of migrating them from an older Mac. If you migrated FCE from your old Mac, this could be the reason for the hiccup with the serial number.
2. The serial number is very long, and it's very easy to mistype a character. Try entering it again, being very careful typing and check the serial nubmer visually before you hit the enter key.
3. Keep in mind that FCE was discontinued in June 2011, even before Lion was released. It is no longer supported and there is no guarantee it will run, or run properly, on later versions of OS X including Mavericks. Users have had spotty success with it on Lion, Mt. Lion & Mavericks. YMMV.
Final Cut Pro X is the currently released & suported video editing app from Apple. You can download, install & try it out free for 30 days.

How do I render in Final Cut Express?

I installed Final Cut Express 4 yesterday. I cannot render anything! When I try to render it says "Warning: Insufficient disk space for render. Please free up space and retry." I have deleted preferences and it still will not render. I have also made room by deleting files but it still will not work! What do I do?

Hi
There are some major differences in how video-editing programs works.
Just to Start and get on with FinalCut is one of them. It doesn't store and keep material as iMovie any version.
So a book on howto can be of Great Value - I used
Diana Weynand
• Final Cut Express, Video Editing for the Digital Enthusiast Apple Pro Training Series
Tom Wolsky
• Final Cut Express 4
And enjoyed especially Tom Wolskys book
Yours Bengt W

Final Cut Express (4.0.1) keeps on freezing (not responding) when i import files (pics). Have force quit 3 times already. Also rebooted Mac. Any help please?

Similar Messages

Maybe you are looking for