Final cut express 4 Graphics crad

Hi everyone.
I just bought a 2nd hand 2008 Mac Pro 3.1 with the ATI Radeon HD 2600 XT graphics card.
I do not want to pay for FCPX and required Graphics card upgrade.
From what I am researching, my ATO card should be compatible with Final Cut Express 4?
Would anyone be able to clarify this for me please?
Many thanks!
Mac Pro 3.1 2008
OSX 10.7.5
Two 2.8 GHz (E5462) Quad-Core Intel Xeon "Harpertown"
10 Gig Ram
ATI Radeon HD 2600 XT with 256 MB of GDDR3 SDRAM
Mac Pro, iOS 6

Legacy versions of Final Cut don't really care what graphics card you're using.

Similar Messages

  • Final Cut Express without Graphics Card

    Can I run FCE without the Graphics card??

    Requirement:
    An AGP or PCI Express graphics card compatible with Quartz Extreme or an Intel GMA integrated graphics processor in MacBook or Mac mini
    What I have(I have no PC or PCI cards under the System Profiler):
    ATI Radeon 9200:
    Chipset Model: ATY,RV280
    Type: Display
    Bus: AGP
    VRAM (Total): 32 MB
    Vendor: ATI (0x1002)
    Device ID: 0x5962
    Revision ID: 0x0001
    ROM Revision: 113-xxxxx-116
    Displays:
    WDE LCM-17v2:
    Resolution: 1280 x 1024 @ 75 Hz
    Depth: 32-bit Color
    Core Image: Not Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    wait "Quartz Extreme: Supported" does that mean i can run FCE?????

  • Bringing vector graphics from illustrator photoshop final cut express.

    I'm having a heck of a time getting my logo from illustrator to photoshop to final cut express. It is squishing it. It looks jagged in photoshop. I am cutting and pasting from an eps file to a photoshop doc that is for film and video. I'm not sure what I'm doing wrong.
    Thanks to anyone who has answers.

    If you have a problem with working with Photoshop you probably want to go to the Adobe forums.
    If you're placing the vector graphic in a Photoshop file make it whatever size you need it to be. You're video image is the square pixel equivalent of 720x540. If you need the logo to fill the frame from edge to edge then make it that size. If you need it smaller, make the PSD smaller.

  • Do I meet Final Cut Express Graphic Card Reqts?

    According to Apple, one needs an AGP or PCI Express Quarts Extreme graphics card for Final Cut Express HD. Does that mean my NVIDIA GeForce 6600 on the G5 and NVIDIA GeForce4 MX on the G4 don't cut it? Am I wasting my money buying Final Cut Express HD?

    Hi(Bonjour)!
    I own a G5 with a GeForce nvidia 6600 256 meg VRAM, and FCE hd works very well. I dont know the GeForce 4 MX on your G4, but quartz Extreme run on GeForce2 MX with a minium of 16 meg VRAM:
    http://www.apple.com/macosx/features/quartzextreme/
    Michel Boissonneault

  • Editing graphic loops in Final Cut express HD ?

    Hello guys
    I'm planning to purchase final cut express.
    Besides the fact that I want to use FCE HD for "hobby style" video editing and also take an advantage of soundtrack pro - main reason for purchasing it is that I want to use it for editing graphic and backgrounds loops for the web .
    Basically I would like to import graphic loops ( mostly from companies like "MOTION LOOPS" or DIGITAL JUICE" ) then edit them, add some titles with live type , music and then convert them to flash and post it on the web.
    So my main my question is ? Does anybody has experience with editing graphic loops or backgrounds in Final cut express or should I rather get some other application for that?
    I would appreciate any answers .
    Thanks for your time.
    Milan

    One point, FCE does not come with Soundtrack Pro. Only with the original Soundtrack, now in v1.5.
    In what edit them, they're movie loops, if you edit the content they won't be loops any more. If you mean edit them in size for banner ads, then FCE is can do that on export but you're going from a heavily compressed PAL(?) format to something very different. The results may not be as good as you expect. You cannot crop the size of the image in FCE because it is a fixed resolution application. You can't for instance make a 60x800 pixel shape to make a banner ad into Flash. You need a resolution independent application to do that like Final Cut Studio.

  • Final Cut Express 2.0.3 and missing AGP graphic card

    I had Final Cut Express 2.0.3 in my older G4 PPC Tower. But now that I've installed FCE 2.0.3 in my new iMac I get an error message telling me I need an AGP graphic card for the program to work.
    What's the deal?
    How can I fix this?
    Thanks,
    Panther

    Have a read of this thread (link). 
    FCE 2 is a PowerPC application so you won't get great performance through Rosetta. FCE 2 is looking for AGP graphics which were standard at the time but no longer present. You should look at upgrading (link) for best performance.
    mrtotes
    Message was edited by: mrtotes: Fixed Link

  • Will my ATI Radeon x1600 graphics card support Final Cut Express?

    In the fall I plan to attend Cincinnati State, and major in AVP (Audio Video Production), and I wanted to get a head start by purchasing the program Final Cut Express. I checked the system specifications, and apparently I need an AGP graphics card. The problem is I have no idea whether or not my ATI Radeon x1600 card will be able to run the program or not. Thank you for your feedback!
    MacBook Pro   Mac OS X (10.4.7)  

    I'm just not sure what is going on - that error is what Mac Mini's and others with onboard video have when they try to run FCE/FCP, and there is a workaround mentioned here:
    http://discussions.apple.com/message.jspa?messageID=1609878
    Of course, your MBP has the ATI card, not onboard video.
    I did a clean install of FCE 3 HD ( PPC ) and then upgraded immediately to FCE 3.5 HD ( Universal ) and have experienced no problems with it.

  • Exporting Animated Map Graphics To Final Cut Express HD

    Is it possible to create an animated map graphic in IMovie, export it as a quicktime file, then import it into a final cut express HD project and insert it into the timeline?
    Thanks,
    Jim

    I don't have any experience with FCex, but I should think that the simplest solution would be to export the song to iTunes and then import the AIFF file that GB created into FCex.

  • Just installed Final Cut Express 4 but doesn't open

    Hey I'm a dummy but....Just installed Final Cut Express 4 but doesn't open tells me I don't have the AGP graphics card,my ATI Radeon X1600?Do some imac 1.83 Intel Core Duo come with out it?I'm freek'n stuck!!Any help would be Greatly appreciated!!

    Al's suggestion should solve the problem.
    However, if you get fed up with hitting the esc key every time you open FCE you could try this permanent cure .......... it's nowhere near as frightening as it sounds and only takes a minute !
    For a permanent cure edit the info.plist like this:-
    1. Right click on the FCE icon (in Applications NOT the Dock) and select "Show Package Contents".
    2. Open the "Contents" folder and double click the "info .plist". It should open automatically in TextEdit - if it doesn't, choose TextEdit manually.
    3. Around 15 or so lines down you will see AGP. Delete it and put in PCI.
    4. Close the window and when asked if you want to save the changes, say yes.

  • Final output of Final Cut Express HD 3.5 is blurry and out of focus.

    Using clear/sharp '.mov' files as clips. Doing simple editing, nothing fancy. When I finally output the project using 'Export/Using QuickTime Conversion,' the final is blurry and out of focus. I've tried every compression type (H264, Animation, etc.). Same problem. Anyone know why this is happening?
    Although the specs for my computer are well within the Final Cut Express guidelines (I've even upgraded my graphics card to a Radeon 9800 Pro 256 MB), I'm still thinking that perhaps the G4 I'm using doesn't have enough juice to run the FCE software. By the way, I don't have any other programs active when using FCE. Any help on this would be greatly appreciated. Thanks.
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB) Mac OS X (10.4.9) 2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB)   Mac OS X (10.4.9)   2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive

    Thanks for your response.
    Here's what I'm (trying) to do:
    I'm creating short 5 minute tutorial movies that will be distributed as QuickTime movies (burned to disk) for short run distribution (college).
    Here's the process: the movie itself is a recording of monitor screen actions recorded (audio and video) using Snapz Pro movie mode. The recorded size is 800 x 600. There might be 5 such 1 or 2 minute clips. The quality is excellent. I bring them in to FCE, drop all the clips on the same track, and add simple transitions. That's it.
    Now I need to somehow get a final QuickTime movie, with close to the same quality I had in the clips.
    So... I take the FCE file, output it using 'Export>QuickTime Conversion,' using the same size I originally recorded in, 800 x 600. Tried every codec available. Every time, the end result is a very blurred version of the original Snapz Pro recordings.
    I've even tried outputting the FCE file as 'Export>QuickTime Move' (not using the conversion method). Opened that up in QuickTime Pro with the same result: blurred and out of focus.
    I'm viewing the exported file in QuickTime Pro, with the 'Movie Properties' setting of 'High Quality.'
    Any clue? This is driving me crazy. But I'm determined to get this right.
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB) Mac OS X (10.4.9) 2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive

  • Final Cut Express not able to run on new MBP

    I purchased my 2.4 GHZ 2GB RAM MBP in late March. Today I installed my previously purchased Final Cut Express 2. When I launched the application, the following error message came up and did not allow me to run the program:
    Configuration error
    The software requires certain hardware or software which is missing.
    - AGP graphics card
    All of the MBPs in the Apple store had FCE loaded on them and I was pretty clear to the salesman that I would be using this software (FCE) on the MBP. Any help would be greatly appreciated. Thank you in advance.

    How old is the FCE? FCE had to be rewritten to work on the Intel Macs. I had to update versions that ran on G4 macs because they would not run on G5 versions. If this is a newer version of FCE that runs on Intel Macs, then I do not have a suggestion for you.

  • WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK

    WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK?

    hey there DavoMrMac,
    according to Apple's 'site:
    System Requirements
    Macintosh computer with 500MHz or faster PowerPC G4 or G5 (550MHz for PowerBook G4) or Intel Core Duo
    512MB RAM
    Display with 1024-by-768 (or higher) resolution
    An AGP or PCI Express graphics card compatible with Quartz Extreme or an Intel GMA integrated graphics processor in MacBook or Mac Mini
    Mac OS X 10.4.6 or later
    QuickTime 7.0.4 or later
    HDV features require 1GHz or faster processor and 1GB of RAM (2GB recommended)
    500MB disk space required for applications; additional 16GB of additional storage space for Soundtrack and LiveType content (can be installed on separate disks)
    DVD drive for software installation
    i've been running FCE HD 3.5 on my MacBook since i got it in November '06. runs okay for the few short SD projects(15:00) or less i've put together.

  • Final Cut Express Vs. Final Cut Pro Vs. Adobe Premiere

    Hey all,
    I just bought my first Apple computer and I'm loving it. I have worked with Final Cut Pro in the past and I really enjoy working with it. However, $1000 is a bit steep. I would like to ask what your opinions are on maybe getting Final Cut Express or Adobe Premiere Pro.
    I have the trial of Adobe Premiere right now, but whenever I place a clip into the timeline, it needs to be rendered. This was never an issue with Final Cut on the computers at my school. I was wondering if you knew if Final Cut Express would have better rendering times and wouldnt need as much rendering. Also, it may be the graphics card in my computer. If you think this is the problem, can you provide me with a solid video/graphics card that I should look into?
    Thanks all,
    Kevin

    I own all three programs actually - here's my advice.
    Stay the heck away from Adobe Premiere. It is no where nearly as Mac friendly and for the price, just isn't worth it. I purchased it for the Blu-ray authoring capabilities of Encore, so that's all I use it for. The plus to Premiere is that it can edit some native formats that Final Cut Pro cannot. For example, native AVCHD as well as MPEG-2 in program streams. That being said, Encore is the best option for Blu-ray authoring at a reasonable cost that gives you the ability to modify menus, etc.
    Final Cut Express is a great application - my only reason for having final cut pro was my need to edit footage at 23.98, 29.97, and 59.94 fps. FCE only handles 29.97 (and 25 fps). Final Cut Pro also gives you the ability to edit more footage natively. FCE only supports DV, HDV, and AVCHD, with the latter two being transcoded into Apple Intermediate Codec for editing. FCP supports a myriad of formats and allows native editing in HDV - although it still transcodes AVCHD. FCP also gives you access to the ProRes set of codecs which are significant improvements on Apple Intermediate Codec that offer high quality in transcoding and editing.
    So the real question is, what are you going to be doing?

  • Final Cut express upgrade for intel macbook pro

    I need help i used to have a G5 desktop and got DVD Studio Pro 3 and then i got Final Cut pro 4 with Upgrade, i try to install this software to the intel Macbook Pro wich i have 2 gig of memory, but if I install DVD Studio Pro 3 and Final Cut pro 4 it will run too slow and there is also the error pf agp graphic card missing i know that if you hit esc will run but it is to slow my hp 2.0ghz is faster i need help on which is the best upgrade for the intel mac so i don't have to purchase the software again i saw on www.apple.com/universal/crossgrade there are some option i call apple and they told me to buy the Final Cut Pro 4 or HD (4.5)for $199.00 but i want to make sure this is what i need to do! help

    Yes you need to crossgrade to 5.1
    The offer only lasts until the end of December and after that it'll probably go back up to $699.
    Also I wanted to point out that you're in the Final Cut Express forum asking about Final Cut Pro. Not a huge deal but in the future you might get better results asking Final Cut Pro related questions in the Final Cut Pro forum.
    i know that if you hit esc will run but it is to slow my hp 2.0ghz is faster
    Your HP runs Final Cut Pro and DVD Studio Pro faster?!? Huh...Bwa?!?
    By this I assume you mean your HP runs comparative programs faster (Avid)

  • Final Cut Express to Timestamped DVD

    I have a Final Cut Express project that is 20 minutes long. There are 140 different clips. Each clip ranges from 5 to 30sec. a piece. I need to export something that all the editors can view on their separate computers w/ chapter markers that have timestamps so they can tell me what/where to edit.
    So far we have been doing it from FCE directly, but now that the video for this company is expanding I need to create a better workflow. One that multiple editors can view for instructing editing on videos.
    I am a graphic designer working @ a publishing company (we are diving into video blind, not my choice). I've got as far as making over 20 videos for viewing online. Now they have footage from one of they conferences they host and all of them need to view it for editing. Then they can come back and say "clip 3, 00:15:03 - 00:18:04, Clip 5 00:04:03 - 00:15:15 etc"... any suggestions?

    FCE Timecode Display may display the current timecode at the playhead position, the start and end timecode of the clip, and the reel name. You may enter this name either during capture (reel name plus timecode may uniquely identify a frame in your movie library), or later in the browser while in list view. Unfortunately there is no way to display the clip name.
    By using your own example it is not possible to display "clip 3, 00:15:03 - 00:18:04, Clip 5 00:04:03 - 00:15:15" but only something like "00:15:03 - 00:18:04" and "00:04:03 - 00:15:15", etc.
    Note however that using the default Type (Absolute Timecode) you might in fact get "02:15:03 - 02:18:04" and "03:04:03 - 03:15:15" if clip 3 starts at absolute 02:00:00 and clip 5 at absolute 03:00:00; in other words you might not need the clip name because the absolute timecode (also named source timecode) uniquely identifies the clip in the movie.
    Some warnings.
    - Burning many clips in iDVD is not an issue, as long as the whole movie is shorter than 2 hours: not a problem in your case (20 minutes, right ?).
    - Instead adding a chapter name to each clip might raise problems: first there is a limit in iDVD I don't recall, but for sure less than 150...; second there is no automatic way to name the chapters: you have to type each name in each chapter marker.
    - iDVD does not have a "time window", but if you burn the clips timecode using the filter above you'll be able to read it also in the iDVD preview window.
    - Finally, after burning the DVD, you can always read the movie timecode while playing back the movie with DVD Player: just use the various controls made available by the player. This however is the new timecode of the movie, not the absolute/source timecode of the original clips.
    I hope I answered your questions.
    Piero

Maybe you are looking for