Final Cut Express 4 Not Installing - Mac Pro dual 2.66

Just got FCE 4. Trying to install on:
Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 5 GB
Bus Speed: 1.33 GHz
Running Quicktime 7.3
Installer writes files to exactly 33% and then quits. Did this about ten times and quits in exactly same spot.
I have all updates, etc.
This feels like iLife 08 iDVD all over again. Could never get that to install.
Anyone else having this problem?
Any thoughts?
Marty
PS - just installed iWork 08 just fine.
Boot ROM Version: MP11.005C.B08

Tom,
Supposedly this is a clean install. NOT upgrade.
What is strange is that installer script says "Upgrade" on the "Install" button.
There is no other FCE on the machine anywhere.
THX
Marty

Similar Messages

Final Cut Express HD and Mac Pro Issue

Howdy all,
I have Final Cut Express HD version 3.0 (LAST year's version not this year's version). I've been using it for some time now on my G4 iMac, but just acquired a 2.66 GHz Mac Pro. I copied over the application and support files to the Mac Pro but when I try to run the program I get an error that I don't have an AGP graphics card. I tried following the advice in this thread: http://discussions.apple.com/thread.jspa?threadID=445909&tstart=60
But none of those suggestions work. Hitting the escape key just stops the program. Changing the plist file does nothing. The program attempts to start and then just stops.
I'd really rather not go out and buy this year's copy if I don't have to as Apple is probably going to be releasing a new version in a couple months anyhow and then I'll upgrade.
Please let me know if there is a work around for this. I would have posted in the other thread so as to not start a duplicate thread, but it had already been archived.
Thanks,
Jon
2.66 GHz MacPro, 30 GB iPod Photo Mac OS X (10.4.8)

if the OP used Migration Assistant or disk cloning
software to make a copy oif his system drive it is
possible to copy the app without using the
installation disks, although these methods of
transferring apps from PowerPC to Intel macs will
undoubtedly cause problems.
This doesn't make sense now that I think about it. If the Application is purely a PowerPC app, then copying to an Intel machine it or re-installing it from scratch should make no difference. The same stuff is all going to be installed anyhow.
To Ian,
It can be copied w/o installing, of that I am sure. You can't just copy the application package though. There's a number of support folders in both the /Library directory and ~/Library directory. Somewhere in there is the licensing info.
Anyhow, I'll try deleting all the plist files you suggest and starting over. If I have to, I will call Apple to see about getting my orignal code. After all, I have registered and they should be able to see each product I have purchased...

How can I use Final Cut Express in a Mac Pro

I want to know how could I use my Final Cut Express HD programm (Version 3) in my new Mac Pro.

FCE 3.0 was not designed to work with Intel based Macs when they were introduced years ago so you have no chance with a modern Mac.
You must upgrade to FCE 4 unless you want to move onto Final Cut Pro X which is designed to be used with the latest technology.
Final Cut Studio 3 will also work OK.

TS3528 What to do if Final Cut Express was installed after Aperture, on a new MaBook Pro Retina running OS X 10.7.4?

What to do if Final Cut Express was installed after Aperture, on a new MaBook Pro Retina running OS X 10.7.4?

Bear in mind 10.7 and FCE are not supported working together.
FCP X is the supported application for Lion.
Users find FCE can mostly work to not working at all with Lion.
You can dowmlaod a trial of FCP X from the App Store.
Al

I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

I am using a macpro 12 core computer
I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

You can have them both on the same computer as I and many others have done for years.
Just go ahead and install FCS 3 normally.
There will be absolutely no problems.

Final Cut Express not able to run on new MBP

I purchased my 2.4 GHZ 2GB RAM MBP in late March. Today I installed my previously purchased Final Cut Express 2. When I launched the application, the following error message came up and did not allow me to run the program:
Configuration error
The software requires certain hardware or software which is missing.
- AGP graphics card
All of the MBPs in the Apple store had FCE loaded on them and I was pretty clear to the salesman that I would be using this software (FCE) on the MBP. Any help would be greatly appreciated. Thank you in advance.

How old is the FCE? FCE had to be rewritten to work on the Intel Macs. I had to update versions that ran on G4 macs because they would not run on G5 versions. If this is a newer version of FCE that runs on Intel Macs, then I do not have a suggestion for you.

Final Cut Express HD install problem

The Live Type and Sound Track installed, but Final Cut Express HD is grayed out. When I try to install it I get an error saying, "You cannot continue. There is nothing to install."
Computer specs:
Power Mac G4
AGP graphics
CPU speed 1.4 GHzs
L2 cahe 256 KB
Memory 1.25 GB
Startup Drive has 137 GBs available
What's going on? What do I need to do to install this software?
Mac OS X (10.4.8)

Under Graphics/Displays in the System Profiler:
ATY,Rage128Pro:
Chipset Model: ATY,Rage128Pro
Type: Display
Bus: AGP
Slot: SLOT-A
VRAM (Total): 16 MB
Vendor: ATI (0x1002)
Device ID: 0x5046
Revision ID: 0x0000
ROM Revision: 113-63001-110
Displays:
SONY CPD-E400:
Resolution: 1152 x 870 @ 75 Hz
Depth: 32-bit Color
Core Image: Not Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported
From the research I've done so far, shouldn't the AGP card work fine with Quartz Extreme and Core Image? What's the fix?

Will Final Cut express work with MacBook Pro??

I am new to Mac and got my first Mac, MacBook pro. 2.4GHZ - 2.o Gig Memory.
Will this be enough or is there an hardware requirement that macbook pro does not come with?
iMovie 08 does not have the effects I was using in the old PC. Slow motion, combining many audio tracks, cross fade etc.
Thanks

Final Cut Pro is the same program (to all intents and purposes) as Final Cut Express and requires the same power of computer - no more, no less.
For most people, FCP will not do anything that FCE can't - apart from allowing you to use formats such as DVCPRO etc. that amateurs are unlikely to use. All the filters and transitions are exactly the same except for a couple of insignificant ones.
The only reason for buying FCP is in order to get all the other programs that are bundled with it.
Ian.

Final cut express versus Adobe Premiere Pro 1.5

Hi
Resently I bought a Mac Pro and Final cut express.
In the past I used Premiere Pro 1.5. When my project was finisched i wrote it back to tape as a Microsoft DV avi file. Is it possible to create a Microsoft DV avi file in Final Cut Express ?
I'll aske this because this tape is transported to the studio and imported into Adobe Premiere 6.0.
thanks in advance
Tonnie
Mac Pro Mac OS X (10.4.9)
Mac OS X (10.4.9)

Once it's on tape it's back in DV format and is no longer an AVI or .mov or any other computer format. If the material is put back on tape it can be captured from the camera or deck into Premiere in whatever format that uses.

Final Cut Express not opening, error says final FCE disks are missing.

Hi there,
Recently I got a WD Fire Wire 800 Hard drive for christmas so I could move all of my final cut projects over to the HD.
When I moved my final cut express documents including all of the folders it now says this error.
To preserve the integrity of the data used by final cut express, it is necessary to ensure the existence of the following paths;
- My HDD Chris is missing
Then it gives me the option to reset scratch disks, check again or quit.
So I'm not sure what I do.
Should I simply move back all the folders and documents that I moved to my hard drive (btw I tried this but it still gave the same error message). I have deleted final cut express 4.1 and re installed 4.0 to see if it works but it didn't and has the same error message.
Any tips would be helpful.
Chees, Chris.

Tom Wolsky wrote:
I can't even open FCE any more because I have moved everything onto the external hard drive including software 'everything'.
You moved the software? You can't do that. That's fatal. The software must be on the system drive as it requires system resources. Move the application called Final Cut Express back into the top level of the Applications folder. Do it move it, rename it, or put it inside a folder.
Do not assign the scratch disk to a folder anywhere. If you want the scratch disk to be on your external drive select the top level of the external drive. FCE will create the folders it needs in that location.
Hi,
When you say move the application final cut express into the application folder.
Do you mean move my folder of final cut express that I moved onto my HDD?
If so it's copying the 20GB folder as I speak. Hopefully fixes this frustrating problem..
Cheers, Chris.

Audio transitions in Final Cut Express--Not Allowing

I'm trying to drag and drop an audio transition (specifically, Cross Fade 0dB) in between two mp3s that I imported into Final Cut Express and which currently reside on the A1 and A2 audio tracks. When I attempt to do so, I get an "X" telling me that I can't. I have rendered everything that needs to be rendered, video and audio. What else do I need to do? All honest help appreciated. Screen shot available upon request.

Okay, done...this FCE is a picky b*&ch. Hope it's worth the trouble. It's my first day playing with it, but man, what a friggin' learning curve. Not to brag, but I consider myself gifted when it comes to computers...and this thing is giving me a headache...
While I have your attention, if you don't mind me throwing in an unrelated question, my iTunes has suddenly been experiencing slowdowns. I don't mean 0.5- to 1.0-second slowdowns. I mean 5-second slowdowns where the spinning carousel keeps me from doing anything. How can I research to see if I have inadvertently installed some software that is doing this BS? It is rather irritating!!

Final Cut Express not recognizing P2

Running FCE on on my iMac, camera gets to desktop no problem. When I open log and transfer, FCE does not read the files. I am shooting on HPX370P, and installed the drivers from the disc but they are not staying in my applications folder. Help!!

Sorry, Final Cut Express does not support P2. Not DVCPRO HD nor AVCintra. Log and Transfer is for AVCHD formats only.
Shane

Final Cut Express not recognizing firewire

I recently deleted my hardrive on my '04 iBook, and reinstalled all my software. I have Final Cut Express version 2.0.2, and upon reinstalling it, and firing it up for the first time, with my XL2 on and attached via firewire, the "External A/V" window pops up, and says "Unable to locate the following devices..." referring to the firewire connection. Now that always pops up when nothing's plugged in that's turned on, but this is the first time it's ever done this when my camera is plugged in and on. I went through every NTSC firewire setting on the "Easy Setup" window, but nothing changed. iMovie reads my XL2 just fine with the same firewire cable. This problem did not occur before I clean out my hardrive, and reinstalled everything. But prior to reinstallation my "capture" function was freezing up after 5 minutes, and said my "startup disc" was full. Any ideas on what the current problems is?

I'm experiencing the same problem. I have a macbook pro 2.4 GHz, using a Canon HV20. When I enter FCE is prompts me saying "Unable to locate following device: Apple Firewire NTSC." However using imovie, everything works fine, I'm able to capture images simply by turning on my camera.
Not sure if its a problem with my FCE, because I've tried to edit in FCE using video from imovie and it gives me an error message constantly.
any ideas?

Final Cut Express Not Opening File

Hullo,
I bought Final Cut Express last weekend, and received it in the mail on Tuesday. I began using that night. When the night was through, I saved my project and shut my computer down. The next morning, I got up to go back to work on the project. When I opened the project file, Final Cut Express launched succesfully. However an error message popped up stating
"The project is unreadable or may be too new for this version of Final Cut."
I then closed out of that, and created another file with just one of the QuickTime sample files, I ran several edits on it, saved it, and quit. When I reopened it, it worked. So I restarted working on the first project. When I was done for the night, I saved it, and quit. I then just went to reopen it to make sure it worked, but it didn't. It brought up the same error message.
Any information or suggestions would be greatly appreciated.
Thanks,
Dmitry.

Thank you very much. I went in search of the Final Cut Express .PList, but it wasn't anywhere to be found on my computer. I had thought I had re updated everything recently, but apparently not. Final Cut Express 4.0.1 was one of the options. So I installed it and restarted my computer and launched my project file. It opened up the way it was supposed to, but it came up with a message that said that the project was from an older version and needed to be and could be updated to the new version. I did just that and now it works like a charm.
Thanks again for all of your help.
Dmitry

Final cut express not opening

everytime i try to open final cut express, i get a message saying that the graphics card is missing. i thought all makes came with graphic cards. could my program be to out of date to use?

Deleting the preferences should not require you to re-register. Did you delete them correctly?
http://www.fcpbook.com/Misc1.html
After you trash the preferences launch the application not a project. Where exactly in the launch sequence does it fail?

Final Cut Express 4 Not Installing - Mac Pro dual 2.66

Similar Messages

Maybe you are looking for