Final Cut Express a no go on Upgraded B&W?

Hello all..
I have a Sonnet 1G upgrade card in a B&W with 1G ram. I would like to run Final Cut Express on it but I think I can't because of the video card, stock Rage.
Anyone know if this is possible? A work around??
Thanks

You want to install Final Cut Express?
Or Final Cut Express HD ?
HD is a very advanced program and requires a 500 MHz G4, G5, or Intel core duo and 10.4.6
Final Cut Express 2 appears to require much more than just an AGP graphics card, based on this article:
300357- Final Cut Express "Configuration Error" alert with less than 384 MB of RAM
• Macintosh computer with a 350MHz PowerPC G4 or G5 processor and AGP graphics card.
• RT Extreme requires a 500MHz PowerPC G4 (550MHz for PowerBook G4) or G5 processor or any dual PowerPC G4 or G5 processors.
• Mac OS X v10.2.5 or later.
• QuickTime 6.4 or later.
• 384MB of RAM (512MB required for RT Extreme).
• 40MB of available disk space required for installation.
If you really want a version that is less resource-intensive, look at Final Cut Pro (not Express) version 3. It will run on a Blue & White under Mac OS 9.2.2 or X. You can sometimes find a used copy on eBay.

Similar Messages

  • Final output of Final Cut Express HD 3.5 is blurry and out of focus.

    Using clear/sharp '.mov' files as clips. Doing simple editing, nothing fancy. When I finally output the project using 'Export/Using QuickTime Conversion,' the final is blurry and out of focus. I've tried every compression type (H264, Animation, etc.). Same problem. Anyone know why this is happening?
    Although the specs for my computer are well within the Final Cut Express guidelines (I've even upgraded my graphics card to a Radeon 9800 Pro 256 MB), I'm still thinking that perhaps the G4 I'm using doesn't have enough juice to run the FCE software. By the way, I don't have any other programs active when using FCE. Any help on this would be greatly appreciated. Thanks.
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB) Mac OS X (10.4.9) 2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB)   Mac OS X (10.4.9)   2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive

    Thanks for your response.
    Here's what I'm (trying) to do:
    I'm creating short 5 minute tutorial movies that will be distributed as QuickTime movies (burned to disk) for short run distribution (college).
    Here's the process: the movie itself is a recording of monitor screen actions recorded (audio and video) using Snapz Pro movie mode. The recorded size is 800 x 600. There might be 5 such 1 or 2 minute clips. The quality is excellent. I bring them in to FCE, drop all the clips on the same track, and add simple transitions. That's it.
    Now I need to somehow get a final QuickTime movie, with close to the same quality I had in the clips.
    So... I take the FCE file, output it using 'Export>QuickTime Conversion,' using the same size I originally recorded in, 800 x 600. Tried every codec available. Every time, the end result is a very blurred version of the original Snapz Pro recordings.
    I've even tried outputting the FCE file as 'Export>QuickTime Move' (not using the conversion method). Opened that up in QuickTime Pro with the same result: blurred and out of focus.
    I'm viewing the exported file in QuickTime Pro, with the 'Movie Properties' setting of 'High Quality.'
    Any clue? This is driving me crazy. But I'm determined to get this right.
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB) Mac OS X (10.4.9) 2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive

  • HELP!  Capture quits even after buying new Final Cut Express HD 3.5

    Had a problem with the quiting of the application upon trying to capture. Thought it was some sort of incompatability with the OS 10.4.9 and my old Final Cut Express program. Accordingly, I upgraded to FCEHD 3.5, thinking everything would be cool.
    Same problem! X?X?X?X??!!
    Anyone with any ideas? I try to capture, and the program immediately quits without any type of error message.
    I Movie captures perfectly.
    George Paul
    G 5   Mac OS X (10.4.9)   power mac dual

    DARN it
    These were two very helpful suggestions. I tried both of them. I could not find any Quick Time receipts, and I trashed the permissions and other files, and repaired the permissions, as indicated on the website.
    HOWEVER, stilll having the same problem. Computers are complex ecosystems, I suppose.
    I am leaving to go visit a couple of nature recording friends, for a week, and will be away from my computer.
    I hope others will read about this problem, and if the spirit moves them, help me solve the mystery. I am sure that all of us have experienced that feeling of frustration when you try to buy the best, and use the best protocols, and the darn thing just won't work.
    Thanks for helping, Community of Final Cut Express Users, especially in the wee hours of the morning.

  • Upgrade Final Cut Express 2

    Can I upgrade from Final Cut Express 2 to Final Cut Pro Production Bundle?

    ....but you CAN upgrade, very cheaply, to FCE 3.5 which also contains LiveType and Soundtrack.
    The extra goodies there should keep you contented for quite a while.
    Ian.

  • Upgrade from Final Cut Express to Pro 5.0

    I think I made a stupid mistake. I purchased Final Cut Pro 5.0 upgrade thinking I could upgrade from Final Cut Express. But when I am asked to enter the previous versions serial number, it does not accept it. Is there any way to do this or am I going to have to buy the full version of Final Cut Pro?
    Also, I have a G4 Powerbook with the following specs. Is it going to run the program if I do finally get it installed?
    CPU Speed: 867 MHz
    L2 Cache (per CPU): 256 KB
    Memory: 640 MB
    Bus Speed: 133 MHz
    NVIDIA GeForce4 MX

    To upgrade from FCE you need the Final Cut Pro 5 Upgrade from Final Cut Express. I just upgraded FCE and that worked fine for me.
    Hope this helps answer your question...

  • Upgrade from Final Cut Express to Final Cut Pro

    Is there an upgrade path from Final Cut Express to Final Cut Pro?

    Why do you want to upgrade?
    Are there some features you particularly need?

  • Upgrade to final cut pro x from final cut express; full price ?

    Is there i way of upgrading Final Cut Express 4 to the new Final Cut Pro X ?
    Or, one has simply to buy the FCPro X for full price ?

    There is no upgrade pricing for FCP X.  Everyone pays the same price.

  • Final Cut express upgrade for intel macbook pro

    I need help i used to have a G5 desktop and got DVD Studio Pro 3 and then i got Final Cut pro 4 with Upgrade, i try to install this software to the intel Macbook Pro wich i have 2 gig of memory, but if I install DVD Studio Pro 3 and Final Cut pro 4 it will run too slow and there is also the error pf agp graphic card missing i know that if you hit esc will run but it is to slow my hp 2.0ghz is faster i need help on which is the best upgrade for the intel mac so i don't have to purchase the software again i saw on www.apple.com/universal/crossgrade there are some option i call apple and they told me to buy the Final Cut Pro 4 or HD (4.5)for $199.00 but i want to make sure this is what i need to do! help

    Yes you need to crossgrade to 5.1
    The offer only lasts until the end of December and after that it'll probably go back up to $699.
    Also I wanted to point out that you're in the Final Cut Express forum asking about Final Cut Pro. Not a huge deal but in the future you might get better results asking Final Cut Pro related questions in the Final Cut Pro forum.
    i know that if you hit esc will run but it is to slow my hp 2.0ghz is faster
    Your HP runs Final Cut Pro and DVD Studio Pro faster?!? Huh...Bwa?!?
    By this I assume you mean your HP runs comparative programs faster (Avid)

  • Which camera to get for Final Cut Express 3.5HD/ upgrade to FCE 4?

    Hello everyone!
    I know this has been discussed frequently, but i am sort of looking for a costum made solution for me
    Following situation: Macbook, 2.16Ghz, 2GB Ram, 320GB HDD @ 5400rpm.
    I am running 10.5.3, have Final Cut Express 3.5 installed and am used to work in it,
    mainly for editing video files not coming from a camcorder.
    I have some experience in SD miniDV recording/editing though.
    NOW I was thinking of getting a new camcorder in the 1500$ max range.
    I want to edit video files, sometimes burn DVDs, at other times only to have them on the mac.
    What i like about some of these new HD consumer models they can record AVCHD and mpeg2 SD in DVD quality. That should allow me to record in mpeg2 and have less hassle with importing/converting into Final Cut Express 3.5 if lower quality is fine (which it is as of now)
    At the same time I could upgrade to Final Cut Express 4 and import the AVCHD files, but I still taken aback from how time and resource consuming it is. Plus it does not allow full HD 1920x1080 in FCE 4 does it?
    So I was looking at the Sony HDR SR11 as a nice camcorder. Seen it live, seems decent.
    On the other hand, is a camera which records in HDV a better solution for me?
    I could keep Final Cut 3.5, no need to upgrade right?
    Is it less hassle to transfer files to the mac and edit them?
    I am very unsure which way to go right now...

    Hi Flore
    This a huge debate. There are very few advantages to the new AVCHD camera's and the vgery long list of negative aspects of AVCHD camera's outweighs any usefulness of them. They are designed for Grandad to pick up and shoot good quality pictures and not for editing.
    I have posted below the wiki address for AVCHD, please read the page. It is very important you do read it. It explains in depth about AVCHD.
    I feel the is no real place for the hard drive based AVCHD camera. There is a place for a mini-dv tape based camera.
    Life will be very hard if you go the Hard-drive camera route. Stay with tape.
    Tape is cheap, hardy and easy to move around. Hard drives not so!!!
    Take some time to read the following wikipedia page...PLEASE READ THIS PAGE!!!
    http://en.wikipedia.org/wiki/AVCHD
    You will see that AVCHD is not all the bee's knee's.
    I personally hope it dies an extremly painful agonising drawnout death.
    AVCHD has no place in the professional domain.
    Justin... Durban.. South Africa

  • I have a copy of Final Cut Express 2. Can I get a current upgrade instead of repurchasing the new Final Cut Pro?

    I have a old copy of Final Cut Express 2 that I never installed. Can I get a current upgrade instead of repurchasing the new Final Cut Pro?
    The Apple Store does not show does not contain purchase information of the old unused Final Cut Express. What can I do to register Final Cut Express 2 will not operate in the current OS systems on my iMac. It only is compatible with the G3 or G5.

    If you have a record/documentation of your FCS full version purchase, you can contact Apple here:
    https://ssl.apple.com/support/proapps/serialnumbers/
    to obtain your serial number.
    MtD
    Message was edited by: Meg The Dog to fix typo

  • Upgraded to Mac OS X Snow Leopard and final cut express 4 will not work

    upgraded to Mac OS X Snow Leopard and final cut express 4 will not launch but my final cut express HD 3.0 version comes up. I reinstall my final cut express 4 upgrade disc and it still will not launch.
    Where do I go from here?

    You installed from the discs, right?
    What happens when you try to launch? What are you doing to launch and what happens you do it? Can't see you computer from here. If you probably need to contact Apple with an installation issue on a new computer.

  • I need to reinstall my Final Cut Express.  I have a version of 3.5 and then an upgrade to 4. Somehow I have managed to mislay the serial No for 3.5 so cannot install.  Does anyone know how I can resolve this.

    I need to reinstall my Final Cut Express.  I have a version of 3.5 and then an upgrade to 4. Somehow I have managed to mislay the serial No for 3.5 so cannot install.  Does anyone know how I can resolve this.

    If version 4 is an upgrade only, you will have to have the serial number of the 3.5 full version.
    If you can't find it try contacting Apple with your proff of purchase, they may be able to help.
    Al

  • Serial Number for Final Cut Express 3.5 upgrade is lost in melt down

    After a major melt down of logic board, internal and external hard drives I am trying to reload programs. I have loaded final cut express 3.0 and when I try to load my 3.5 upgrade it asks for a serial number. Even though I have the packaging it came in I can not find the number. I registered the software and would like to know if there is a location with Apple I can find the software I have registered and get the serial number from that. Or any other way to find it.

    Apple customer service was very good and had the serial number within 2 days. Thank you for the suggestion.

  • Will Final Cut Express be improved by upgrading from Mountain Lion to Mavericks?

    Will the performance of Final Cut Express, currently running under Mountain Lion OS X 10.8.5 (12F45), be improved by upgrading to Mavericks?

    Ian R. Brown wrote:
    .  .  .  .  but you will need to have Mavericks installed to use FCP X.
    Should you feel the urge to give it a try, this website has a free 2 hour course of video  tutorials that will get you off to a flying start.
    http://www.izzyvideo.com/final-cut-pro-x-tutorial/
    There are some 26 "bite-size" lessons so it's not too daunting.
    Quite right Ian.
    Probably should have mentioned it. 
    Al

  • Final Cut Studio 2: upgrade from Final Cut Express HD

    I'm guessing I know the answer to this question already, but I'm hoping someone will tell me I'm not correct. Is there an upgrade path from Final Cut Express HD 3.5.1 to Final Cut Studio 2? I don't see one listed on the software page in the Apple store. Seems ashame if there isn't. I'm sure there are other FCE HD owners out there who would like to upgrade rather than starting over for the tune of $1299.
    G5   Mac OS X (10.4.9)  

    And it's well worth it. you can recoup a little of
    your cost by uninstalling fce and selling it.
    What's required in order to sell it? Can the registration be transferred to a new owner?

Maybe you are looking for