Final cut express-changing 16X9 to 4X3

Can't figure out how to change the aspect ratio in my canvas. Large black bars appear on top and bottom of frame. Any thoughts?

NO
Then You've not been careful enough.
Browser Window ! (window with the Sequens/Bins/Captured material etc)
And You see that there are a number of Columns ?
Keep on going to the right - And there it is.
It's the same in FinalCut Express !
I got FinalCut Express from 1 to 4.0.1 and FinalCut Pro to v. 6 - and on the later ones as from FCE 3 and FCP 3 or 4 there is this column.
Must be set to get 16x9 or un-selected to get back to 4x3.
Yours Bengt W

Similar Messages

Final Cut Express changes the video aspect

Hello.
I imported some videoes from m Sony-sr32 HandyCam with iMovie 08. The videos were captured in a wide screen format, and iMovie shows them in wide screen.
However, when I import the movie files to Final Cut Express it plays them in a normal 4:3 aspect. The video seems o be distorted (narrowed).
Why is that, and how can i Change that?
Thanks!

You have to check the anamorphic column in the Browser or in item properties to tell FCE the material is anamorphic.

Changing an SD sequence in Final Cut Express to an HD Sequence?

I have a job done for a client that was done shot in SD and edited in SD on Final Cut Express. I would like to "trick" the software by putting the SD footage in an HD sequence and stretching it manually to keep from having that squashed video effect.
1) Is this possible?
2) Can I change a sequence from SD to HD without redoing the entire sequence manually?
If you need this info, I brought the footage into the computer by firewire NTSC
Thank you.

Thank you for the info. I went to the Boris website and downloaded Boris Uprez. I am new to this. How do I get this plugin to work in Final cut express. Will I see this in the program automatically or do I have to install it and if so, how?
thanks again for your help

How to change framerate in Final Cut Express

Hello everybody - Just a simple question. How can I change the framerate to 24 fps of a sequence within Final Cut Express? Or to any other framerate? Thanks

OK, at least it's clear for me now, thank you very much

Speed changes cause Final Cut Express 2 to quit

I have a video that runs about a minute over two hours. I wanted to change the speed by adjusting the speed change feature to 102% so as to be able to fit it on a 2-hour dvd.
However, even with my dual G5 (4GB RAM) the app unexpectedly quits before it's even halfway completed rendering.
I'm on version 2.0.3. (Seems like this version of Final Cut Express has more of a problem with Tiger than it did with 10.3.9, BTW)
Any suggestions would be welcome!
Dave
iBook G4, G5 Dual 2.0, 'Pods galore Mac OS X (10.4.8)

A 2% speed reduction is not going to look good. There's no way you can reduce 29.97fps by 2% and produce a frame rate that's compressible with anything like correct frame interpolation. Not without serious expenditure of time, money, and learning, After Effects and ReTimer. You'd be much better off actually cutting five minutes out of your movie. I guarantee if you look hard enough at it you can do it. There's no 2:01:00:00 story that can't be told in 1:58:00:00.

Canon GL2 is not recognized by Final Cut Express

I am trying to capture from my Canon GL2. I hook up the fire wire but neither I-Movie or Final Cut Express seem to recognize the connection.
Any Suggestions?

Hi
My general list on this.
*NO CAMERA or A/D-box*
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable *very often the problem maker*.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing eg NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odwenGB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Trouble capturing footage to final cut express

hey this is quite urgent....
i am trying to upload footage to final cut express from my sony DCR-HC52E. it sais VTR OK and plays and pauses and stuff but i cannot see anything it just stayed on those coloured bars.
i can see it playing on the camera though...
i got it working once with this camera, just cant remember how
any help would be greatly appreciated!

Hi
My table for this was once for iMovie - BUT it's more General than that so You might find help here.
*NO CAMERA or A/D-box*
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable *very often the problem maker*.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing eg NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odwenGB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Uploading Hi8 Videos into Final Cut Express

Hi,
I am having trouble uploading H8 video files into Final Cut Express.
What I have is:
Sony Player SLV-T2000
Canopus didital converter ADVC-100
I have connected the rca cables from the player to the digital recorder and then the firewire cable from the digital converter to the Macbook Pro. Also the digital convertor is set for analogue in.
When I play the Hi8 tape I can see the video in the viewer but it will not capture.
Can someone advice me where I am going wrong.

Hi
May be You find something here (it's not only for iMovie but FCE/P too)
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

HT2948 I have a Sony DCR-PC100 is it supported by final cut express?? wilth

I have a Soney DCR-PC100 is it supported by final cut express ?? what 'p' will they convert to??

Hi
Just my notes - for iMovie - but they go to 99% for FinalCut too.
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

TS2179 import files from final cut express to idvd

Import files from final cut express to idvd. When we are making a dvd in iDVD importing the files (widescreen mov files ) from final cut express they automatically change to 4x3. They look correct when played in the quicktime player. Has anyone had this problem.

Generally, I just drag the DV file from the finder to the iDVD menu window. Make sure you don't drag it to any Drop Zones, I think that might be your problem with the DV file showing up as the background. If you have default settings in iDVD, this drag and drop should then create submenus based on your chapter markers.
I'm not sure if you have any issues with the Chapters not showing up in QT. If you're expecting them to show up, then make sure that when you do the Export to QT that the option to include Chapter Markers is set. Upon conversion, you should see the Chapters within QT as well as when imported into iDVD.
Hope this helps!

I'm running Final Cut Express 2. How can I move entire project and application from one internal hard drive to another? Ran out of space on one drive. Thanks.

I'm running Final Cut Express 2. My video project is 95% done and I've run out of space on my 500g internal hard drive. How can I (1) move the complete FCE program and video to my unused 250g internal hard drive and operate it from there and (2) how do I then purge all the FCE info from the 500g drive without losing anything from the 250 drive?
Also, is it possible to change the aspect ratio from 4:3 to 16:9 when the project is finished? If so, how? I now know this all should have been done before I started. Thanks for the help.

1. You can't move the application. It must remain on the system drive. Move your capture scratch folder to the external FireWire drive and use the reconnect function in the project.
2. What's the media 16:9 or 4:3?

Final Cut Express won't capture audio with the video anymore, why?

I have used Final Cut Express 4 for over a year now with no problems, but recently I am unable to capture any audio with the video from my camera. I can do it through iMovie no problem. I can't figure out if I changed a setting by accident because everything looks normal to me. Could another program be interfering with this? Quicktime Pro? I have no idea how to fix this.

First of all, we need a bunch of information in order to help. Please provide the specs of the footage and the sequence you are using. Also, are you using DV, HDV, or AVCHD? Do you hear audio when the clip is played in the viewer, or is there no audio at all once the clip is captured/ingested?

Just installed Final Cut Express 4 but doesn't open

Hey I'm a dummy but....Just installed Final Cut Express 4 but doesn't open tells me I don't have the AGP graphics card,my ATI Radeon X1600?Do some imac 1.83 Intel Core Duo come with out it?I'm freek'n stuck!!Any help would be Greatly appreciated!!

Al's suggestion should solve the problem.
However, if you get fed up with hitting the esc key every time you open FCE you could try this permanent cure .......... it's nowhere near as frightening as it sounds and only takes a minute !
For a permanent cure edit the info.plist like this:-
1. Right click on the FCE icon (in Applications NOT the Dock) and select "Show Package Contents".
2. Open the "Contents" folder and double click the "info .plist". It should open automatically in TextEdit - if it doesn't, choose TextEdit manually.
3. Around 15 or so lines down you will see AGP. Delete it and put in PCI.
4. Close the window and when asked if you want to save the changes, say yes.

Made a 2 minute edit on Final Cut Express but at the 30 seconds (after I exported), there's a clip showing up that is not in my project, a clip i don't want in there, a glitch, how can I correct this problem? I don't want to start over again :(

Basically, I have 2 problems:
1) When I export it shows this clip that's not in my normal project and it ruins my project by having this clip in there; it's like a glitch. I tried to change the clip, and and still doesn't make the project normal again. Tried a new sequence and dragging the project into HD Mode and to no avail.
My camera:
HD: 1080p
Settings: At Hd
2)
Also, it's only displaying black bars above my project, even after exporting at 720p. I just don't want this random clip in my project or the black bars. I'm using Final Cut Express. Does anyone have any possible idea what this could be? Any help woud be much appreciated! I'm clueless on this.
IS ANYBODY OUT THERE? : )

1) Is it a video clip? Something you recognize? To be clear, it's displaying at a point in your exported movie but doesn't appear at all in the sequence?
2) What are your sequence settings? Right-click your sequence and choose "Item Properties" to verify.

Xacti HD and Final Cut Express -- It used to work great! How do I go back?

I have a Sanyo Xacti HD700. It gives me 1280x720 MPEG-4 AVC/H.264 files, which my Mac just loves. I used to be able to quickly edit the clips together in Final Cut Express, export using complementary QuickTime settings (specifically, those recommended by Vimeo for HD playback), and get beautiful MP4 files, relatively quickly.
Then, one day, a friend needed me to edit a quick video using a DV camcorder. It was confusing as heck getting the footage into FCE, and not particularly elegant getting it out. But, the project was done overnight, I washed my hands of it, and wanted to get back to making beautiful MP4 files again, relatively quickly.
Except I can't! Now, for one, encoding takes hours. Hours! My source videos and export videos are very similar, yet I sit and watch as the estimate for completion actually goes up for an hour before slowly coming back down.
And frankly, that would be fine, except now my exported videos are the wrong size. They include letterboxes, and the video itself is squished, stretched. So I wait four times as long for a ghastly video. The best I could do is use the Quicktime export settings to "crop off" the letterboxing, but there's still some black bars and it's just not the same.
Here's how my videos used to look:
http://vimeo.com/1067235
Here's how an exported video looks now:
http://vimeo.com/1655414?pg=embed&sec=1655414
What happened? Out of the box, everything worked perfectly. Now, tainted with actual tape, Final Cut Express seems like it's running my videos through six extra wringers and giving me clips worse than I'd get just cut-and-paste editing the Xacti files in QuickTime Pro!
I Googled my brains out, and all I've learned is, if I had Final Cut Pro, "Project Settings" would have all the switches I need. Well, I don't have FCP, just FCE.
Somewhere, something was set that I want to unset. Can anyone help? Do I have to delete every trace of FCE and just reinstall?
Mahalo for any advice!

It sounds like you didn't change the settings after you made the DV video. Did you switch it back to 1280x720 and make a new sequence in that format? Check item properties for the sequence you edited. What does it say? Also check item properties for any media you captured since working in DV.

Final cut express-changing 16X9 to 4X3

Similar Messages

Maybe you are looking for