Final Cut Express HD and Animoto resolutions don't match

I imported a 720p video into Final Cut Express HD from Animoto.com (created online with Animoto and downloaded the MP4).
I added a song and a couple of bookend credits then exported to QuickTime Movie. The resolution of the FC export is significantly lower than the original MP4. Significantly lower. I've tried almost all the export settings in the "QuickTime Conversion" export, but nothing comes close to the resolution of the imported MP4.
Can anyone see what I might be doing wrong?

Have a read here:
https://discussions.apple.com/message/19146995#19146995
Sounds like your Easy Setup and clips are scrambled to me resulting in degraded footage.
BTW: MP4 should be transcoded to match an Easy Setup.
Codecs used in FCE are editing codecs, MP4 is for delivery.
Al

Similar Messages

Final Cut Express 4 and avchd

I read an article that recommended your products so I'm hoping you can help me. I recently bought a Panasonic AC-90A HD video camera which uses AVCHD recording format. In the article it said that I should be able to upload into Final Cut Express 4 and edit. I can upload to the viewing screen, however, I can't seem to bring the clips into the bins which I need to do to edit. Would you be able to help finding the problem and clearing it so that I can edit.
Thank you,
John

This is a user to user forum. You are not addressing Apple here.
Can you describe exactly what you are doing and where the problem occurs?
Can you verify you are using FCE version 4.01?
On your camera can you verify you are not shooting in the 1080 60P mode? 1080 60P AVCHD was not a standard when Apple discontinued and abandoned FCE, so that functionality was never added.
MtD

Final Cut Express 4 and Final Cut Pro 7

I have been working at school on Final Cut Pro 7
I just bought Final Cut Express 4 thinking it would be a cheaper way for me work at my home computer. However, when I open my Final Cut files (created in Pro 7) I get a message that says their format is too new for Final Cut Express 4.
Is there a solution to my problem? Is it really not possible to go back and forth between Final Cut Pro 7 and Final Cut Express 4?
Is there some creative way of making this work? Help!

Unfortunately not. You can start the project in FCE. Open it FCP, but once it's saved in FCP, it will no longer open in FCE. (It's not supposed to anyway, though it does rarely in some cases where very little is done in FCP.)

Final Cut Express Log and Transfer files not playing audio on another mac

I recently purchased a new Mac Pro for video editing for work, and am having some issues with it. Previously i was working on a MacBook Pro running OS 10.4.11, on Final Cut Express 4.
I used Log & Transfer to get the AVCHD videos from my Canon HF 11 onto my mac, and had no issues. Where my problems started was when I moved my video files to my new Mac Pro running OS 10.5.6. Now when I open those video files in either Quicktime or FCE, the VIDEO plays but _not the audio_. I thought maybe the video files were bad, but when I tried the original files on the new Mac, they still didn't work. I don't know if there's some codec that isn't on the new mac or if there's some other problem... I just know that my new amazing machine cannot play the files that my 3 year old one can. I'm not new to computers, but I'm not an Apple guru. Any help would be greatly appreciated!

Well I can try trashing the files, but I can't log and transfer the files again, as it's months of footage that aren't on the camera anymore. But i did find something else out. The files that were recorded with the camera's built-in mic recording is fine and with sound, but the files that I used my wireless mic setup had no sound. I don't know why that is, because they worked fine on the MacBook Pro. I tried log and transferring a new clip on the Mac Pro wit;h footage using the wireless mic, and still no sound.

Final Cut Express 4 and MacOS 10.6?

I just bought the new Mac Box Set with Snow Leopard and Final Cut Express 4.
Thus far, I've been running MacOS 10.4.11 on my MacBook Pro. I have no experience with 10.5 or 10.6.
I have yet to receive shipment of either software package. Is there anything I should know about when installing Final Cut Express on a Snow Leopard system? (NOTE: I am having this software installed after also having an MCE Technologies 500 GB hard drive also installed, so this will all be a clean install.)
I have used Final Cut Pro 4.5 before, but never Express.

Walt,
I don't think FCE comes with QT pro. I already had QT pro when I loaded FCE so I am not 100 % certain.
Do you have quicktime Pro now? It looks like you are doing a clean install of Snow Leopard, If you are updating to Snow Leopard and have QT pro it moves QT7 Pro to the utilities folder. With the clean install you need to get QT 7 from the Snow Leopard disk. Then you fire up Quicktime and go to the registration screen and put in your QT pro info.
Hope this helps you.

Final Cut Express HD and Mac Pro Issue

Howdy all,
I have Final Cut Express HD version 3.0 (LAST year's version not this year's version). I've been using it for some time now on my G4 iMac, but just acquired a 2.66 GHz Mac Pro. I copied over the application and support files to the Mac Pro but when I try to run the program I get an error that I don't have an AGP graphics card. I tried following the advice in this thread: http://discussions.apple.com/thread.jspa?threadID=445909&tstart=60
But none of those suggestions work. Hitting the escape key just stops the program. Changing the plist file does nothing. The program attempts to start and then just stops.
I'd really rather not go out and buy this year's copy if I don't have to as Apple is probably going to be releasing a new version in a couple months anyhow and then I'll upgrade.
Please let me know if there is a work around for this. I would have posted in the other thread so as to not start a duplicate thread, but it had already been archived.
Thanks,
Jon
2.66 GHz MacPro, 30 GB iPod Photo Mac OS X (10.4.8)

if the OP used Migration Assistant or disk cloning
software to make a copy oif his system drive it is
possible to copy the app without using the
installation disks, although these methods of
transferring apps from PowerPC to Intel macs will
undoubtedly cause problems.
This doesn't make sense now that I think about it. If the Application is purely a PowerPC app, then copying to an Intel machine it or re-installing it from scratch should make no difference. The same stuff is all going to be installed anyhow.
To Ian,
It can be copied w/o installing, of that I am sure. You can't just copy the application package though. There's a number of support folders in both the /Library directory and ~/Library directory. Somewhere in there is the licensing info.
Anyhow, I'll try deleting all the plist files you suggest and starting over. If I have to, I will call Apple to see about getting my orignal code. After all, I have registered and they should be able to see each product I have purchased...

Final Cut Express HD and Camcorder compatibility HELP Ughhhhhhhh!!!!

I just don't get it. Appple has a section that shows which camcorders are compatible with Final Cut HD Express, but there mostly old camcorders and not many HD ones at that. Then you do read some of these review sites on camcorders and they tell you they have been using Final Cut express with such and such a camcorder that is not on the APPLE list!! Whats more frustrating are these long discussions/threads/message boards on the net in terms of whats compatible and what isn't with HD express. Can we have a comprehensive list somewhere. Their's obviusly a huge problem and disconnnect here since there are literally thousands of pages and threads and messages dealing with this, and I'm adding to it. Any help will be appreciatiated. Thank you

OIC my mistake...
You only wanted a list of the cameras YOU were interested in...
I forgot you (and HD cameras) should be the only importance to Apple.
Yeah forget about alllllllllll the other SD mini-dv cams, etc.
The reason the discussions is flooded with questions is two reasons:
1.) No one knows how to search.
2.) They know they have to ask/answer a question to take part in these discussions here....
Search or browse for existing answers before you ask a question. Someone else may have asked your question — it may save you some time.
Stay on topic. Apple's discussion forums are here to help people use Apple products and technologies more effectively. Unless otherwise noted, don't add Submissions about nontechnical topics, including:
That Apple rumor you saw on another website.
Discussions of Apple policies or procedures.
Speculations/rumors about unannounced products.
The status of your 1973 MG Midget restoration.
Post constructive comments and questions. Unless otherwise noted, your Submission should either be a technical support question or a technical support answer. Feedback about new feature requests or product enhancements are welcome too. Don't post non-constructive complaints, polls, or petitions.

Are there bugs between final cut express 2, and imovie?

i dont have the HD version of final cut express, just the original version. i imported some footage and exported as a H.264 high quality video, then put that to idvd...the final burned version looked like soo bad, it was like the horizonal lines of the video were blurred and studdering. i don't know. so i exported a full quality video and took it to imovie HD6 to do the H.264 compression, then took that to idvd and did a "best quality" burn and then the final output on the tv....looked like some frames were being skipped.....what the heck? Is this just a bug between final cut express 2.0 and idvd? maybe i should try capturing in imovie and sending that to idvd.....BUT I ALREADY EDITED IT! AHHHHHH

well i'm trying to save space on my HD, so i export to a H.264 file to keep on my drive, and when i need to make dvd's, i just compress the H.264 file, and it still looks awesome on a tv......it has worked a while ago, but all of a sudden it's giving me issues. i've tried every way
RAW to H.264 to imovie to idvd best quality to dvd....BAD
RAW to RAW to imovie to idvd best performance to dvd...BAD
RAW to H.264 to idvd best quality to dvd...BAD
RAW to imovie to H.264 to imovie to idvd to dvd...BAD
i just dont get it

Final Cut Express HD and virtual backgrounds

Can Final Cut Express HD use virtual backgrounds? If so, how is it done?
MacBook Pro Mac OS X (10.4.8)

Yep you need VKey2 for Quicktime and FCE and all the other stuff for Chromakeying (green screen)
http://www.oakstreetsoftware.com/gkey/

Final Cut Express 2 and Lion?

Hi,
I have some thoughts on FCE2 (2.0.2) and the Lion. Is it fully compatible or is it recommended that I buy Final Cut X in the App Store? I am interested in buying a new MacBook Pro 13-inchand need to know about my Final Cut Express 2 is fully compatible.
Thanks in advance.

Have been trying out FCX over the past month or so and not only is there key framing capability, but I would say its key framing techniques are more intuitive and the results superior to the legacy FCE and FCP.
I think I pretty much agree with Ian Brown's views on the new program. The majority of FCE (and probably FCS) users should find that FCX is more of an opportunity than a limitation to their creativity. It's different and requires an adjustment to our thinking, but most of us can get the hang of the new approach and terminology (which I am Not a fan of) in short order. (That's not to say that I don't agree with much of the criticism from the film & broadcast people, because I do.)
Russ

Final Cut Express HD and OS Mavericks

I've upgraded to OS Mavericks, now allmost everytime i put in a clip in the timeline Final Cut Express crashes. I don't want to give this program up yet.
Is there a solution ?

the App Store app would replace an older trial version of Aperture with the current regular releas
That's because when Apple announced that iPhoto, iMovie and GarageBand & iWork are now free, they silently included Aperture. If you already have any of them installed (including unlicensed trial versions) then under Mavericks the AppStore updates them to the current release. This was intentional and made easy by the facts that they are all currently supported releases and available in the AppStore.
The situation with Final Cut Express is different. FCE was never available in the AppStore to begin with. It was end-of-lifed back in in June 2011. Apple only ever offered upgrades from one version of FCE to the next. To my knowledge, they never offered upgrades from FCE to the former Final Cut Pro/Studio. Their approach with Final Cut Studio was similar - upgrades only from one version to another. There have never been any upgrades offered from FCE or FCP/Studio to FCP-X. In this case Apple is following its longstanding approach to selling the Final Cut family of products.

What's the deal with Final Cut Express HD and me?

A few months ago, I encountered a lot of problems when I was trying to capture some HD video using Final Cut Express H.D. I've set my camera (a JVC GR-HD1U) to the MPEG2 setting, and I changed the set up in Final Cut to Apple Intermediate Codec 1080i60. The good news is that I was able to capture for about 15 seconds. Then the capture stops, and a message comes up telling me that I have reached the end of the tape. Only I haven't.
So.....what's the deal here?
Is there something that I am overlooking, or doing wrong? Or is it just not meant to be for me to capture HD Video?
If someone could let me know, I would appreciate it.
Thanks everyone.

Am I right in thinking this camera isn't compatible/on the supported list? Does it work with iMovie? Perhaps you could capture there and import into FCE?
I see in your earlier post Manson Root had captured from this camera successfully. Perhaps they will reply again.

Final Cut Express HD and the Macbook Pro

I just purchased a Macbook Pro along with final cut express HD. After purchase I read that FCE HD won't work with the macbook pro. I was hoping to see if anyone knew if they were coming out with an upgrade to the universal version like they are with Final Cut Pro.
Intel based macbook pro Mac OS X (10.4.4)

That will not work. Ian's solution is for dual core G5s and PCIe based iMacs. It does not address Intel based machines like the 2006 iMac and the MacBook Pro. These machines will have to wait till the end of March for the release of new Universal Binary software to run on them. It's possible FCE3 will never run and will need to be upgraded to another version. If you recently purchased FCE HD to run it on this new computer, I'd suggest, if you can, to return it until the position on the new software becomes clear.

Final Cut Express Opens and Shuts Down?! HELP!!!

Hi there,
I recently purchased Final Cut Express 2.0 and installed it onto my computer. After running into numerous glitches, I upgraded to FCE 3.5.
I installed FCE 3.5 and LiveType and Soundbooth both are working great. However, when I open FCE, it begins to open and starts to load. You assume it is going to load in, but then the screen disappears and you are back to the desktop.
I have deleted the preference files from the library, figuring that would be the solution. However, it seems as if that still has not solved my problem. I also tried Reparing Disc Utilities AND I tried re-installing just Final Cut Express after deleting the files that I thought might have been corrupt.
Can anybody lend some advice as to what else I might try? If you have steps on how to do these things, that'd be great, too.
The apple support people that I called said I should come on here, so please do not advise me to call Apple.
THANK YOU!!!!

Try trashing the preferences again making sure you delete ALL of them as described in this article by Tom:-
http://www.fcpbook.com/Misc1.html
If FCE still does not work, try reinstalling again but make sure you first of all UNINSTALL COMPLETELY like this :-
http://docs.info.apple.com/article.html?artnum=301182
You can ignore the LiveType and Soundtrack items.
Ian.

Can Final Cut Express 4 and Canon ZR60

I'm new to the whole video experience and would appreciate some advice. I have a Canon ZR60 with a Mini DV tape. Before I purchase the software, I'd like to know if Final Cut Express 4 can process video taken with this camera or do I need to get a video camera that shoots HD?
Thanks, Stan

Hi
And You need to buy a 4-pin to 6-pin (or FW-800) FireWire Cable to connect.
Neither Your Camera or FCE/Mac can Import/Capture Your movie via USB/USB2 AT ALL.
This Cable is as I know of never supplied from start - has to be bought as extra.
Yours Bengt W

Final Cut Express HD and Animoto resolutions don't match

Similar Messages

Maybe you are looking for