Final Cut Express HD problems.

Hello,
I am using Final Cut Express and edited a video that might have converted to SD from HD. How do I check the pixel size of my clips? Also, when I export this video at 1280 x 720 using Quicktime Compressor, it comes out at 1080 x 720. How do I fix this?
Thank you very much for your help.

Are you using the QuickTime Conversion function? In Options there is a size button where you can specify the size you want.

Similar Messages

  • G4 and Final Cut Express installation problems

    Thank you in advance for any help you can send my way. Any will be greatly appreciated.
    I have a PowerMac G4 (gray) tower. Recently, under the advice of a Mac tech, I installed a 200GB harddrive and a Sonnet's Tempo ATA133 PCI card so that I could successfully install and run FinalCut Express. Now not only do I have the previous installed but I also have 1GHz CPU Speed, 1GB of RAM, DVD/Superdrive, Mac OS 10.4.3 and more than enough memory for the installation.
    So now for the two strange parts:
    1) When trying to install Final Cut it says that I cannot install the software because I lack the hardware.
    2) And now I noticed in my System Profiler it says that my Machine Name is "Power Mac G3 (PCI graphics)" which I know it is not!
    Do I have the wrong PCI card? Did I install it wrong? Am I missing something?
    For your reference, listed below is what is required to run Final Cut Express:
    Minimum Hardware Requirements
    • A Macintosh computer with a 500 MHz or faster PowerPC G4 or G5 processor (550 MHz for PowerBook G4, 450 MHz for dual-processor Power Mac G4 or G5) and an AGP (Accelerated Graphics Port) graphics card compatible with Quartz Extreme
    • 384 MB of RAM (512 MB required for RT Extreme and Soundtrack)
    • For HDV: A Macintosh computer with a 1 GHz or faster PowerPC G4 or G5 processor and 1 GB of RAM
    • 1 GB of available disk space for application installation
    • 5 GB of available disk space for Soundtrack content
    • 9 GB of available disk space for LiveType content
    • DVD drive for software installation
    Minimum Software Requirements
    • Mac OS X 10.3.7 or later
    • QuickTime 6.5.2 or later
    Thanks again.

    HI Coyote,
    This could prove to be a problem. You definitely need 65MB of VRAM to run FCP. And FCP is a fairly sophisticated video editing program and takes time to learn. Unless the iBook has DVD burn capability, which I doubt, even with an older version of iLife, you wouldn't be able to burn to DVD's. But you could use iMovie, which is part of iLife to view video that's been uploaded to the iBook. Another potential problem is, I think this particular iBookG4's factory drive is 60GB. Video editing requires huge amounts of drive space to run without crashing. iLife 05 requires 4.3GB of drive space. iLife 05 requires 256MB of RAM, but runs much more efficiently with 512MB.
    So, you have several glitches. Limited drive space, limited memory, insufficient VRAM, and no DVD burn capability. You wouy also need a camcorder that is compatible with the iBookG4.
    I wish I had better news... here is a link to Apple's information for minimum requirements for iLife 05: http://docs.info.apple.com/article.html?artnum=306338
    Carolyn

  • Final Cut Express HD Problem

    I got Final Cut Express for my birthday in march. I bought a firewire cable to connect my DV Sony camcorder to my mac. The problem is when I click File and then capture, the footage won't import from the camcorder and when it plays its all shacky and disorted. I tried it with iMovie HD works like a charm. I did a FCE update to 3.5.1 still the same problem. I also Reinstalled OS X Tiger and updated it to 10.4.9 again. I heard about Macbooks having a similar problem it was something to do with an AGP graphics problem, but i'm using a Mac mini. Please help!!
    Mac Mini   Mac OS X (10.4.9)   intel core duo 1.83Ghz 2.00GB of RAM

    Welcome to the discussions from a fellow resident in the People's Republic of Yorkshire...
    Are you using 'easy set-up'>DV PAL ?
    Have you got device control set to 'firewire pal' ('Audio/video settings'>device control preset>firewire pal)
    Are you capturing to internal drive or ,as recommended, to a Mac OS Extended (not journaled) formatted external FireWire drive?
    Have you tried 'trashing preferences'? (perform a search in this forum).

  • Final Cut Express - Exporting problem

    I have used Final Cut Express for years with no problems. All of a sudden, when I export my sequence into a Quicktime Movie, the resulting movie has intermittent problems with photos. ALL my movie clips work fine. However, random pictures “get stuck” and will simply remain on screen wiping out several pictures that follow. The sound continues correctly, but the movie remains fixed on a given photo. At some point, the movie goes back to normal and pictures and clips show correctly, until the same problem repeats itself.
    I tried removing the software from my system and restoring from scratch but that did not help. The problem is also not with a given picture or transition, because if I redo making the movie the problem will usually display itself at a different location. Does anyone have a suggestion as to what might be causing this problem?

    Dragging the photos to your timeline should work, though the normal route is to import them and then drag them from the browser. User-installed plugins are located in three different places:
    FxScript Plugins:
    User > Library > Preferences > Final Cut Express User Data > Plugins
    Macintosh HD > Library > Application Support > Final Cut Express Support > Plugins
    FxPlug Plugins:
    Macintosh HD > Library > Plug-Ins > FxPlug
    You should copy all user-installed plugins to a different location before reinstalling, then place them back in their respective folders afterward.

  • Annoying Final Cut Express HD Problem

    Hi People, I'm In A Right Pickle, I Just Bought Myself A Macbook And Everything Was Running Fine On It Apart From My Final Cut Express HD That I Bought With It.
    Whenever It Runs After A Couple Of Minutes It Closes Unexpectedly And Tells Me To Send An Error Report Or Reopen, Well This Leaves Me Not Being Able To Do Any Editing For My Media Course At All Which Was The Reason For Me Buying A Macbook
    Can Any Of You Guys Help Me Find Out Whats Wrong And Sort It At All?
    Thanx In Advance

    There is no way your problem can be diagnosed from the small amount of info you give.
    For starters, Trash the Preferences EXACTLY like this:-
    http://www.fcpbook.com/Misc1.html
    Then open Disk Utility and Repair Disk Permissions.
    You will find Disk Utility in the Utility folder in your Applications folder.
    Ian.

  • Final Cut express rendering problem

    Hello,
    I'm creating a QuickTime file on Final Cut to be used as a background in iDVD. I'm importing graphics/text from Adobe Photoshop and when I look at it unrendered, it looks perfect.
    However, as soon as I render it (and the subsequent output), there seems to be horrible aliasing.
    I've tried to adjust the Render Control Tab, but I don't even know if my version has one (Final Cut Express 1.0, talk about old school!)
    Please help!

    This problem is from another and I will learn more tonight. Thanks for asking.

  • Final Cut Express 2 - Problem rendering video in sequence

    I've created a 23 minute video but the last portion of the video will not render in the sequence. The audio continues to render. I would like to make some small adjustments and polish up the sequence to make a final copy but I can't see it in the canvas. I tried copying and pasting this sequence to a new sequence and to a new project. Making a new project worked once - for awhile the video was rendering and then it stopped again. Any suggestions? The render command just flashes a quick window - but doesn't do more than that.

    I have Final Cut Express 2 and I'm working on a G5 with OSX. I have two hard drives and on the one with the video, I still have quite a bit of free space.
    Do you think I should try to export it in 2 pieces by using the in and out markers when I export? Will that mess up iDVD when I go to press it?

  • Final Cut Express Export problems

    I am trying to export a .dv file into a .avi format but it only seems to export 9 mins of a 1 hr file.
    What am I doing wrong.

    I am not sure what is going on, but i would be inclined to do the following,
    a) check to make sure that you have not set the in/out markers to limit the export to only 9 minutes.
    b) empty your render cache, you will need to do this manually via the finder.
    c) re-render the timeline.
    d) but to eliminate the .avi conversion, try exporting as a movie reference 1st, then using quicktime pro export to another format, such as mp4 and see if the same limitation happens. if not try again with the .avi export.
    Message was edited by: peterjohndean
    Message was edited by: peterjohndean

  • Final Cut Express Isn't Importing SOME files

    Hey guys
    I've been using Final Cut Express to edit game footage I record on a Hauppauge HDPVR device. The device (and accompanying software) creates a .m2ts and then converts it to an mpeg4 file.
    Now, I record all my footage this way, and 95% of the time I can import to Final Cut Express no problems. However, a few files won't, and I get the "1 file recognised, 1 unknown" error. All of the file types are the same, so its not a case of an incompatible file type.
    Also, the file runs happily in Quicktime, but just won't import into FCE.
    Any help would be great thanks!

    The media needs to be converted into a format that is supported natively in FCE not into MPEG-4. I don't know what you're using to convert, probably Handbrake but that's not the way to do it. You could try ClipWrap but I don't know if it works with that camera.

  • Made a 2 minute edit on Final Cut Express but at the 30 seconds (after I exported), there's a clip showing up that is not in my project, a clip i don't want in there, a glitch, how can I correct this problem? I don't want to start over again :(

    Basically, I have 2 problems:
    1) When I export it shows this clip that's not in my normal project and it ruins my project by having this clip in there; it's like a glitch. I tried to change the clip, and and still doesn't make the project normal again. Tried a new sequence and dragging the project into HD Mode and to no avail.
    My camera:
    HD: 1080p
    Settings: At Hd
    2)
    Also, it's only displaying black bars above my project, even after exporting at 720p. I just don't want this random clip in my project or the black bars. I'm using Final Cut Express. Does anyone have any possible idea what this could be? Any help woud be much appreciated! I'm clueless on this.
    IS ANYBODY OUT THERE?  : )

    1) Is it a video clip? Something you recognize?  To be clear, it's displaying at a point in your exported movie but doesn't appear at all in the sequence?
    2) What are your sequence settings?  Right-click your sequence and choose "Item Properties" to verify.

  • Problems with converted .MTS files in Final Cut Express 4

    I have a hard drive full of video shot and a consumer grade HD camera in the .MTS format.
    After struggling with finding an acceptable converter, I finally bought iSkysoft's Video Converter.
    I've been using the converter's output preset of "MP4 Format for Final Cut X" and "High definition MP4 format" settings and they both yield the same results.
    Now I am having problems simply editing the footage in FCE4.
    I can take the footage and set i/o points in them but when I drag clips into the timeline, it often hangs up, locks up, FCE is unresponsive and it's even crashed.
    This is on a 2 x 3.2 GHz Quad-Core Intel Mac running 10.6.8.

    In order to use .mts video in Final Cut Express, you need to convert the video to QuickTime/Apple Intermediate Codec before importing into FCE.   .mts video files are typically H.264 video, highly compressed and is not something that FCE can edit.  Ditto for "MP4 format for FCPX or HighDef MP4 format".  If iSkysoft cannot convert to QT/AIC then I suggest Clipwrap
    Note: for the future, if your camcorder is an AVCHD camcorder you can directly ingest the video from the camcorder into FCE.

  • Problem with picture in burned DVD from Final Cut Express quicktime file

    I use Final Cut Express HD to edit. On more than one occasion, I have exported a movie using quicktime conversion and then used iDVD to burn it to a DVD. Every time I do this, the DVD's picture is shaky, especially when there is fast motion. I have tried burning with both the best performance and best quality settings in iDVD and it doesn't make a difference. The same problem occured when I tried to use a friend's computer to do the same thing. We both have the new 20" iMacs. I am not sure if it is Final Cut or iDVD that is the problem, but quicktime files that are not from Final Cut Express are not a problem. I have a feeling it is a setting somewhere that needs to be changed. Thanks!

    Greetings.
    I've personally never used iDVD for any sort of DVD authoring, but the symptoms that you're describing are giving me the impression that there may be an issue with the MPEG 2 encode. Again, I don't know iDVD so you might be better off asking this question in the iDVD forum.

  • Iam trying to import a short video in final cut express and I'm getting this error... File Error: 1 file(s) recognized, 0 access denied, 1 unknown.  How do I solve this problem? The video is on my desktop it's an mpg.

    Iam trying to import a short video in final cut express and I'm getting this error... File Error: 1 file(s) recognized. 0 access denied, 1 unknown. How do I solve this problem?  The video is on my desktop and it's an mpg file. Please help me 

    Get a copy of MPEG Streamclip and convert your MPG file to QuickTime/Apple Intermediate Codec (AIC).  In FCE, select one of the setups that uses AIC that best matches your clip (say, 1920x1080i60).  Create a new sequence, then import the converted file.
    Note that if your MPG file is actually MPEG2 you will also need the QuickTime MPEG2 Component in addition to MPEG Streamclip. 
    What was the source of the MPG file?  How about if you open it in QuickTime, then do Window > Show Movie Inspector.  Tell us what it says for codec/compression, frame size & frame rate.

  • I have a new iMac but having problems installing final cut express 4 from old macbook pro ?

    i have a new iMac but having problems installing final cut express 4 from old macbook pro ?

    FCE was discontinued nearly 3 years ago and is no longer supported.
    I don't know whether it's possible to install it on Mavericks and if you do it may not perform properly.
    Final Cut pro X and iMovie are the only Apple apps that are supported.

  • Final Cut Express 3.5 - Problems Starting Up

    Hi there,
    I recently purchased Final Cut Express 2.0 and installed it onto my computer. After running into numerous glitches, I upgraded to FCE 3.5.
    I installed FCE 3.5 and LiveType and Soundbooth both are working great. However, when I open FCE, it begins to open and starts to load. You assume it is going to load in, but then the screen disappears and you are back to the desktop.
    I have deleted the preference files from the library, figuring that would be the solution. However, it seems as if that still has not solved my problem.
    Can anybody lend some advice as to what else I might try? If you have steps on how to do these things, that'd be great, too.
    I need to get this fixed by the weekend.
    NOTE: Someone said to try repairing Disc Permissions? What will that do? Will my information/docuemnts, etc be deleted? Someone also said to try re-installing? I need back ups, however, if these two things don't work.
    The apple support people that I called said I should come on here, so please do not advise me to call Apple.
    THANK YOU!!!!

    Repair Disk Permissions as Peter suggests.
    It will only take a couple of minutes and will not harm anything on your Mac.
    If that doesn't cure the problem, trash your preferences PROPERLY. Most people simply delete the .plist which is worse than useless. This is how to do it correctly :-
    http://www.fcpbook.com/Misc1.html
    Should that not improve matters, there is probably some corrupt file in FCE so completely UNINSTALL FCE exactly like this :-
    http://docs.info.apple.com/article.html?artnum=301182
    You can ignore all the Soundtrack and LiveType items.
    Finally reinstall just FCE 3.5.
    Ian.

Maybe you are looking for