Final cut Express HD sound splits when adding video clips

this have been happening recently. I set up my music and start add video and photos. Im new to FCE. Anway now when I add a clip the music bar splits seperating to the width of the clip.
Whats causeing this and what is the fix.
thank you

Hi
A. I don't know
B. BUT it happens to me to and my strategy is
- to add new material beyond the end of all material in TimeLine
- then move it into place.
This also happens to me when adding Video to another track ==> all splits - but by first add it beyond the end and move it into place always works.
But to be able to put it (Video, Photos and Audio) into right place directly would have been great.
Yours Bengt W

Similar Messages

Final Cut Express HD/Sound track

Two questions:
First, Does Shake work with Final Cut Express HD?
Secondly, I am missing weapson and explosions on my Soundtrack, I tried reinstalling the CD-rom, it did not replace the two missing sounds. Any ideas?
Should I unstall all of Final Cut and reinstall the entire program?

1. Shake does not work directly with FCE HD. Or at least, not that I know of. You must probably just export from Shake and import to FCE. Or perhaps you should go with FCS, as it most likely integrates more closely with Shake.
2. Upon opening up the application Soundtrack, I too do not have anything installed for the category 'Weapons' & 'Explosions'. Perhaps it put the categories in, but it did not install any, instead letting you go out and buy more Apple Loops, or just Loops in general. Speaking of 3rd Party Loops, try this website for any sound effects, it is very broad:
http://www.findsounds.com/
- Craig

Why does Final Cut Express 4 quit automatically when I open Log and Transfer window?

I'm using a Sony NXCAM and I am editing on a Mac OS X. The clips I have recorded are in MTS format so I understand I must use the Log and Transfer setting to import my clips. I plug the camera into my computer, go into Final Cut Express 4, turn the camera on, and then go into the Log and Transfer window. Once I open that, Final Cut quits and an error message pops up that reads, "Final Cut Express quit unexpectedly." Final Cut quits too fast for me to even click on anything in the Log and Transfer window. I really don't understand why it does this. The only thing I can think of why Final Cut is quitting is because I have over 100 clips on the camera, so maybe that is too much for Final Cut Express 4 to handle. However, I wouldn't think that would be the case. If anyone knows of anything I could do to fix this problem, then please send me a reply. I've looked around the internet to see if anyone else has had this problem, but I haven't found anything. Thank you, any responses will be greatly appreciated!
-Snowconedxx39

Shooted videos directly saved to the SD memory card is no problem, the log and transfer window immediately recognizes the sd card and I was able to convert the videos. I will check later today if this were 25p, 50i or 50p footages.
Strangely enough is that transferring the .mts files from the internal memory to the sd card (using the Mac finder, I don't know if it is possible within the camera itself) won’t help, the log and transfer window doesn't the recognizes the transferred files, strange!
I hope that this problem will not occur using Final Cut Pro X, which I will start using soon.
I'm curious what the exact problem will be.

Clips splitting when adding more clips

i have one main movie in my project and then I'm adding more clips on top of it on other video tracks.
the only problem is, whenever i do that, my main clips splits into two, right in the place where i'm adding a new clip. is there any way to disable that?

sounds like you are insert editing the new clips and you want to do an overwrite edit.
if you are doing it by drag and drop, take note of an arrow that appears when you drag the clip to the timeline. if you hover the mouse in the top third of the clip you are editing to, the arrow will point right - meaning it will 'insert' the new clip, and therefore move everything to accommodate. If you hover the mouse in the bottom two thirds, you will see the arrow point down - this means it will be an overwrite edit, and it won't move the other clips..
cheers
hugh

I updated to final cut X, 10.2 and now my video clips dont show in my project

Recently just updated final cut to the newer latest version and now when i open my project the video clips look like they are missing or wont play but audio from the same videos plays. I reveal video in finder and try and play them and they wont play in quick time either it trys to convert them and then fails. They are .mov files. Anyone experience this?

Tom Wolsky wrote:
What are the media specs? Where did it come from?
Resolving Black Frames Issues with Panasonic AVCHD and Final Cut Pro X 10.2 - Apple Support
Hi Tom,
The link says, you may have black frames if:
"You're working with Panasonic AVCHD video files from an AVCCAM device recorded at 25p or 30p."
Can I know what id AVCCAM ?
I record a lot using Panasonic GH4 in 4K and Panasonic GX7 which is AVCHD.
Is my following assumption correct :
Assumption 1:
Panasonic GH4 would not be a problem bcos it records in 4K
Assumption 2:
My AVCHD from Panasonic GX7 wold not be a problem because all these while it ingest without problem. (NB: I dunno whether my GX7 records in AVCCAM)
Thanks

Audio files split when adding video

hello. sometimes when i add video to the timeline, the audio tracks seem to split. why is this and can i turn that feature off because it gets annoying after awhile.

How split? Use the patch panel to set which tracks get sent to which destination. Link a1 to A1 and a2 to A2 if that's where you want it to go. If you want it to go someplace else set the patches to different track destinations.

Does Final Cut Express HD 3.5 not have (video)rain effect like iMovie???

Why doesn't it have it. or does it have it? i loked in all of the sub folders in video effects in the browser thing. and it's not there
Macos G5. macos x 10.4.10
And i have fcexpress HD 3.5 just bought it today

Well thnks alot guys. But the whole reason i bought FPE is because i wanted something better that would not eat up disk space. And trust me, i saw an aweful amount of improvement regarding this yesterday when i used Fpe and did a sample movie with effects and transitions. It didn't eat up my hard disk space.
IMovie eats diskspace like crazy. just by applying effects like rain. so i don't want to use it. Well, it's ok. I am doing a slide show /animation story kind of thing with pictures of real self drawn art on real paper.. and the story i have at times involves rain. I was thinking of having effects like rain instead of drawing rain myself... because it would come alive even though my pictures are static. So i just thought it would be a cool effect. but well thanks for the tips.

On final Cut express I try to import a video but it says error: unknown file. What should I do?, On final Cut express I try to import a video but it says error: unknown file. What should I do?

I try to import a video but it says error: unknown file. What should I do?

Where are you importing from, a camera, a file?????
Please provide some type of specific info regards the import.
FYI: FCE works with only DV, HDV and AVCHD codecs.
Al

Why is Final Cut Express adding 5 minutes of black to the end of my .dv export? I've marked it out, there are no additional clips at the end, it's doing this consistantly.

I'm using Final Cut Express 4.0 and when I export to .dv it adds 5 minutes of black to the end of my export. Any ideas on why this is happening? I have it marked out and there are no additional clips at the end that it's trying to capture.

According to previous posts in this forum, Apple does not support FCE with Lion, no less Mountain Lion. Nonetheless some people report no problems using FCE with Lion, depending upon upgrade protocols from Leopard etc. You list FEC 4.0, but FCE has an update to 4.01 free download from software update.

Exporting ITunes to Final Cut Express

I recently purchased a song in ITunes 6 to use in a home movie I am creating in Final Cut Express 2.0.3 When I imported the file, Final cut would not read it. The file was blank. I open it up in IMovie and it plays fine. So I saved it as a clip and once again tried to import the clip into Final cut and it is still blank. I have done this before in ITunes 5 and it worked fine. Does this have to do with the protected file of the song?
Any help?

Thanks Charlie,
Yes the problem was with the protected file.
After posting this I tried importing the tune into I Movie and then selecting File/Share. I Movie forces you to also select a video clip for some reason when working with protected files. Next I selected "Quicktime/Expert settings/Share" - a menu appears then select "Sound to AIFF" and "41.1 kHz 16 bit stereo".
This seemed to do the trick and I appreciate your help but I was trying into to avoid burning a cd for one song.
I purchased this song to use only in a home movie so it seems unfortunate that these files are so protected. People buy music from I tunes rather than download it for free because they are honest so I don't understand why the music industry wants to allienate its customers.
Anyway, I really appreciate your help.
Sincerely,
Rob

Final Cut Express anomaly

Why does Final Cut Express stop capturing video at approximately 5:04 to 5:16 minutes saying: "end of tape".
I start at the place where it stopped capturing, start capturing again and another 5+ minutes goes by and "bloop!" the "end of tape" message appears again. Capturing has stopped.
What's up with that????

I bought, installed and used the FCE in 2005. I used it for 5 years before it started acting up. All of a sudden the "end of tape" message would appear and the capture stopped.
> Capture limit set in System Settings to 59 minutes.
>Regardless of Time Code breaks, could be 1 hour tape continuous video, it sops at approx. 5 minutes and a few seconds (never the same twice).
> Digital Tape (1 Hour, Sony, TDK, FujiFilm, whatever) on Sony DV Camcorder. Have used same one for 12 years here at work.
>Capturing straight to internal HDD.
     >Sometimes tot he original HDD sometimes to the added HDD (also internal).
          Both are formatted Mac OS Extended (Journaled).
     >Final Cut Express HD 3.0
          (When filling out the Info on the site Final Cut Express was NOT one of the options, that's why it says Final                Cut Pro X, sorry.)
     > OS X 10.5.8
Thanks for your responses.

Video out of sync in Final Cut Express... but in sync everywhere else!

'm working on making one video that is composed of two camera angles of the same thing. So, I have two video tracks in Final Cut Express, one for the side view, and one for the main view. Both videos are Quicktime Movies (.mov extension).
Here are the file details:
Main Cam: duration - 1hr 26min 46sec // file size - 5.74gb
Side Cam: duration - 1hr 29min 18sec // file size - 5.63gb
[the side cam video is a little longer because I started filming with that camera a little bit before the main cam and stopped the filming a little earlier]
Now, here's the problem. Both videos are in my Final Cut Express project. The Main Cam video runs fine. But the Side Cam video's video is out of sync with the audio by a lot (somewhere between 2 and 6 full seconds). Normally I would think that something had happened during the filming, but here's the odd thing: the Side Cam video plays perfectly in sync out of Final Cut Express.
If I open it in Quicktime, or even in iMovie, the audio and video are perfectly in sync for the entirely of the video. But when I import it into FCE and watch it there, whether it's in the timeline, in the viewer, rendered, or unrendered (I've tried them all), it's horribly out of sync.
So, the video plays fine and in sync everwhere except for in the Final Cut Express program. The Main Cam video, which has a very similar duration and file size and which is the same file type, plays perfectly even in FCE. The only problem is the Side Cam, and I can't figure out why this is, or how to fix it.
Another thing: these videos were not captured from a camera into Final Cut. I already have the video files on the computer, and as I've said, the audio is fine there. To get them into FCE, I use file -> import.
Also, if anyone has suggestions on how to fix this, could you provide directions of some sort? I'm fairly new to Final Cut.
Any advice would be greatly, greatly appreciated.
Thank you so much in advance!

Hi(Bonjour)!
Does both camcorders was set to 16-48 khz audio?
One way to synch audio that drifting from video (or from anoter audio lenght) is to set precisely 2 markers (one near the beginning, another near the end) in the correct lenght video track. Try to find spots where you can hear and see a common reference. The result of the workaround will put a corrected audios between those points only.
Now note the duration between those 2 markers in video track.
*Unlink the video/audio clip with the wrong duration.*
Select the drifting audio and put the 2 markers at the intended reference points.
The duration should be less or more than the video.
Use the blade tool to cut the wrong lenght audio at markers.
The tips is to set a new duration for this portion with the set speed command.
With this +new duration+, align the in point of audio with the first video marker. The out point of audio should be aligned with the second video marker.
Now the audio should match the video lenght and should be in synch.
Michel Boissonneault

Problems with converted .MTS files in Final Cut Express 4

I have a hard drive full of video shot and a consumer grade HD camera in the .MTS format.
After struggling with finding an acceptable converter, I finally bought iSkysoft's Video Converter.
I've been using the converter's output preset of "MP4 Format for Final Cut X" and "High definition MP4 format" settings and they both yield the same results.
Now I am having problems simply editing the footage in FCE4.
I can take the footage and set i/o points in them but when I drag clips into the timeline, it often hangs up, locks up, FCE is unresponsive and it's even crashed.
This is on a 2 x 3.2 GHz Quad-Core Intel Mac running 10.6.8.

In order to use .mts video in Final Cut Express, you need to convert the video to QuickTime/Apple Intermediate Codec before importing into FCE. .mts video files are typically H.264 video, highly compressed and is not something that FCE can edit. Ditto for "MP4 format for FCPX or HighDef MP4 format". If iSkysoft cannot convert to QT/AIC then I suggest Clipwrap
Note: for the future, if your camcorder is an AVCHD camcorder you can directly ingest the video from the camcorder into FCE.

How do I delete tabs in Final Cut Express?

Final Cut Express 4: I know I can't delete whole projects; what I'm worried about is doing a bunch of short projects and having the tabs that show the titles of each project become so many I can't even use the program. If I do 5 short videos and have 5 tabs designating them, what happens when I get to 20? Or are they temporary files and will disappear soon? Thanx in advance.

You can delete entire projects, but it isn't a 'one button' method. When you start and save a new project in FCE, FCE will create several files and folders. First is the project file which will be saved wherever you decided to save it with the name you give it. Next, when you bring footage into a project using Log & Capture or Log & Transfer, FCE will create a folder for those files inside the Capture/Scratch folder - the sub-folder will bear the same name as the project. And then when you render anything in that project, FCE will create a sub-folder inside the Render Files folder and the Audio Render Files folder - both will also bear the same name as the project. FCE will also create folders for that project in the Autosave Vault folder. To delete a project completely, navigate those files/folders and delete them and your project will no longer exist, nor will any media or renders associated with it.
Here's a typical set up:
Macintosh HD/
     Users/
          Projects/
               ABC Music Video
               Jones Project
               Smith Documentary
Media Drive/
     Final Cut Express Documents/
           Audio Renders/
               ABC Music Video
               Jones Demo
               Smith Documentary
          Autosave Vault/
               ABC Music Video
               Jones Demo
               Smith Documentary
          Capture Scratch/
               ABC Music Video
               Jones Demo
               Smith Documentary
          Render Files/
               ABC Music Video
               Jones Demo
               Smith Documentary
To delete the project named "Jones Demo" navigate to where those files are stored and delete the folders named "Jones Demo" then empty the trash; the project and all of its associated media will be gone. The only files that FCE might create for that project that are not stored inside a folder bearing the project's name are the Waveform Cache files - I usually delete the contents of that folder when ever I'm finished with a project.
Personally, I keep all of my project files just in case I ever need to go back to a project. Project files are relatively small so hard drive space isn't really an issue.
As for the issue of having too many projects open at one time, that's a simple user error. All you need to do before opening a new or another existing project is to close the project you were working on. So if I were working on the "ABC Music Video" project and wanted to work on the "Smith Documentary" project for a while, I'd close the "ABC Music Video" Project, then open the "Smith Documentary" project.
-DH

I am using final cut express. It seems that any clip over a certain length, say 5 min, does not fully transfer! All shorter clips are perfectly fine. Is there some reason why longer clips are not fully transferred? (a half blue circle shows up on the tran

I am using final cut express 4. It seems that any clip over a certain length, say 5 min, does not fully transfer! All shorter clips are perfectly fine. Is there some reason why longer clips are not fully transferred? (a half blue circle shows up on the transfer list, indicating that the clip was not fully transferred. When I check in the capture scratch folder, sure enough the whole clip is not there!
Is there some glitch in final cut express that only allows short clips to be transferred in full?

Thanks for the reply. I'll try to answer all the questions (I am a relative novice). Your help is appreciated.
By the way, the other reply I received suggested the following:
In Final Cut Express>System Settings>Scratch Discs make sure the Limit Capture/Export File Segement Size To: is not checked.
I did this and it was already unchecked. So this is not the answer...
The strange thing is, I have been logging and transferring with FCE for 2 yrs without any problems at all with shorter clips, but have come up against the problem with long clips (over 5 or so min) the whole time. I got around it by simply making sure I stopped recording after less than 5 min while shooting footage. OR if I accidentally got a long clip, I import into imovie and then import into FCE. Not very streamline and I worry about compressions altering quality!
I am now trying to import a 20 min and a 17 min clip and it only transfers around 3 minutes of each, I have re-tried several times and it happens repeatedly. The blue circle in the transfer list shows up as a half blue circle instead of full. Clip cuts off after 3 or so minutes.
ANSWERS
how you are ingesting the files
From external flash drive connected directly to mac using FCE.
the format of the source footage
digital via ext flash memory. Frame size :1929X1080 / 25fps
what camera shot the footage
SONY HXR NX5
how you are connecting to the computer
from flash memory directly via usb
what version of FCE you are using
4
what OS your computer is running
10.6.8
what model Mac
macbook Pro intel Core i7
what drive you are using for Capture Scratch
3TB external drive (plenty of room left)

Final cut Express HD sound splits when adding video clips

Similar Messages

Maybe you are looking for