Final Cut Express HD v Adobe Acrobat

My Adobe Acrobat 8.0 reader became corrupted, so I downloaded a new copy and dumped the old. Now FCE HD won't open the Users Manual from the Help Menu. How do I correct this?

Your suggestion put me on the right track. I could only get to a Windows uninstall option for Adobe Reader, so I decided to do a system search for Adobe Reader on my MacPro and deleted everything that had Adobe Reader associated with it. Then I reloaded Adobe Reader from the Adobe site. Apparently one of the key points is to choose to "Open" the application rather than "Save" it, then run the Adobe installer. Once I had done this I was able to open Reader from FCE HD. While working on this I discovered that I couldn't open Reader from any other applications. That made me realize the problem was not with FCE HD, but with Adobe Reader.
Thanks for the lead.

Similar Messages

Final cut express HD versus Adobe premiere pro 1.5

Hi
Resently I bought a Mac Pro and Final cut express.
In the past I used Premiere Pro 1.5. When my project was finisched i wrote it back to tape as a Microsoft DV avi file. Is it possible to create a Microsoft DV avi file in Final Cut Express ?
I'll aske this because this tape is transported to the studio and imported into Adobe Premiere 6.0.
thanks in advance
Tonnie
Mac OS X (10.4.9)

You'd be better off asking this in the inal Cut Express forum - this one if for Final Cut Pro.
Up one floor and down a corridor, you'll find it.

Adobe CS4/5 and Final Cut Express On a MacBook Air?

Hey all
Im planning to get a MacBook for my GCSE's, and im leaning towards the air.
I will be running applications such as Adobe Photoshop CS5, After Effects CS5, Lightroom CS5, and Final Cut Express regularly, so would a 13" 1.86ghz MBA C2D Processor with 4gb of RAM be able to run these apps fast and efficiently with no lag? Or should I opt for the baseline MBP 13"? Im also looking for portability, as im going to be taking it into school
Thanks

After effects!? Yikes... that is a beast of a program! Depends how in depth you plan on using it. Are you going to be doing 3D animations with several camera layers? If so, I don't think a MBP is going to work too smoothly. If you are doing basic to moderate use of AE functions then I think it would work fine.
Just a heads up before buying, check out the apple refurb store. They have a bunch of MBP with different specs for a very reasonable price. I got my 17" MBP from there and it works awesome with the same warranty as new... for like $500 off!

Final Cut Express Vs. Final Cut Pro Vs. Adobe Premiere

Hey all,
I just bought my first Apple computer and I'm loving it. I have worked with Final Cut Pro in the past and I really enjoy working with it. However, $1000 is a bit steep. I would like to ask what your opinions are on maybe getting Final Cut Express or Adobe Premiere Pro.
I have the trial of Adobe Premiere right now, but whenever I place a clip into the timeline, it needs to be rendered. This was never an issue with Final Cut on the computers at my school. I was wondering if you knew if Final Cut Express would have better rendering times and wouldnt need as much rendering. Also, it may be the graphics card in my computer. If you think this is the problem, can you provide me with a solid video/graphics card that I should look into?
Thanks all,
Kevin

I own all three programs actually - here's my advice.
Stay the heck away from Adobe Premiere. It is no where nearly as Mac friendly and for the price, just isn't worth it. I purchased it for the Blu-ray authoring capabilities of Encore, so that's all I use it for. The plus to Premiere is that it can edit some native formats that Final Cut Pro cannot. For example, native AVCHD as well as MPEG-2 in program streams. That being said, Encore is the best option for Blu-ray authoring at a reasonable cost that gives you the ability to modify menus, etc.
Final Cut Express is a great application - my only reason for having final cut pro was my need to edit footage at 23.98, 29.97, and 59.94 fps. FCE only handles 29.97 (and 25 fps). Final Cut Pro also gives you the ability to edit more footage natively. FCE only supports DV, HDV, and AVCHD, with the latter two being transcoded into Apple Intermediate Codec for editing. FCP supports a myriad of formats and allows native editing in HDV - although it still transcodes AVCHD. FCP also gives you access to the ProRes set of codecs which are significant improvements on Apple Intermediate Codec that offer high quality in transcoding and editing.
So the real question is, what are you going to be doing?

Final cut express versus Adobe Premiere Pro 1.5

Hi
Resently I bought a Mac Pro and Final cut express.
In the past I used Premiere Pro 1.5. When my project was finisched i wrote it back to tape as a Microsoft DV avi file. Is it possible to create a Microsoft DV avi file in Final Cut Express ?
I'll aske this because this tape is transported to the studio and imported into Adobe Premiere 6.0.
thanks in advance
Tonnie
Mac Pro Mac OS X (10.4.9)
Mac OS X (10.4.9)

Once it's on tape it's back in DV format and is no longer an AVI or .mov or any other computer format. If the material is put back on tape it can be captured from the camera or deck into Premiere in whatever format that uses.

Latest advice on creating .flv advice from Final Cut Express?

IN our newsroom, we have a recently purchased MacBook Pro running Final Cut Express 4.0.1 for the creation of videos for our website - problem is the the website can only take .flv files and they can be no larger than about 20 MBs. I have looked at most of the posts in this forum on creating .flv files, but I wondered what the llatest, best advice for doing this is? I know that:
1/ I can export a .mov file and just change the extension to .flv, but that creates a file as large as the original .mov file - too large for the website.
2/ The powers-that-be did not include Adobe Flash on this computer so I am supposing I cannot use Adobe Flash Encoder as a standalone app.
3/ DV Kitchen looks like it might work, but it is $79 and has a lot of bells and whistles we don't need. Plus, the beancounters will have to approve the purchase.
4/ What other cheaper options can create an .flv file from a FCE .mov file that would squeeze it down to about 20 MB?
Thanks, Douglas

If you dont have Flash the only worthwhile converter for flv is Sorenson Squeeze:
http://www.sorensonmedia.com/video-encoding/

Canon GL2 is not recognized by Final Cut Express

I am trying to capture from my Canon GL2. I hook up the fire wire but neither I-Movie or Final Cut Express seem to recognize the connection.
Any Suggestions?

Hi
My general list on this.
*NO CAMERA or A/D-box*
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable *very often the problem maker*.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing eg NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odwenGB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Trouble capturing footage to final cut express

hey this is quite urgent....
i am trying to upload footage to final cut express from my sony DCR-HC52E. it sais VTR OK and plays and pauses and stuff but i cannot see anything it just stayed on those coloured bars.
i can see it playing on the camera though...
i got it working once with this camera, just cant remember how
any help would be greatly appreciated!

Hi
My table for this was once for iMovie - BUT it's more General than that so You might find help here.
*NO CAMERA or A/D-box*
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable *very often the problem maker*.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing eg NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odwenGB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Uploading Hi8 Videos into Final Cut Express

Hi,
I am having trouble uploading H8 video files into Final Cut Express.
What I have is:
Sony Player SLV-T2000
Canopus didital converter ADVC-100
I have connected the rca cables from the player to the digital recorder and then the firewire cable from the digital converter to the Macbook Pro. Also the digital convertor is set for analogue in.
When I play the Hi8 tape I can see the video in the viewer but it will not capture.
Can someone advice me where I am going wrong.

Hi
May be You find something here (it's not only for iMovie but FCE/P too)
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Bringing vector graphics from illustrator photoshop final cut express.

I'm having a heck of a time getting my logo from illustrator to photoshop to final cut express. It is squishing it. It looks jagged in photoshop. I am cutting and pasting from an eps file to a photoshop doc that is for film and video. I'm not sure what I'm doing wrong.
Thanks to anyone who has answers.

If you have a problem with working with Photoshop you probably want to go to the Adobe forums.
If you're placing the vector graphic in a Photoshop file make it whatever size you need it to be. You're video image is the square pixel equivalent of 720x540. If you need the logo to fill the frame from edge to edge then make it that size. If you need it smaller, make the PSD smaller.

HT2948 I have a Sony DCR-PC100 is it supported by final cut express?? wilth

I have a Soney DCR-PC100 is it supported by final cut express ?? what 'p' will they convert to??

Hi
Just my notes - for iMovie - but they go to 99% for FinalCut too.
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

How doI Import HD clips from HTC Desire HD for use in Final Cut Express?

Before anyone says it I know it's dead easy with and iPhone but how difficult is it to import video from the HTC Desire HD to use with Final Cut Express? I am looking at purchasing this phone and would be interested in people's thoughts.

Hi Tom,
Pleased to make your acquaintance, having recently used your FCE4 editing workshop as a bible I'd like to thank you for making an understandable read! Re my comments: This was early days with the application and I have a lot of work to catch up on before I get to work with it properly. In a test I set it up using the 720p25 apple intermediate codec and it needed rendering. the phone uses 3gp to record. I haven't gone into any detail with it yet, still busy trying to migrate from windows mid project from adobe premiere before even attempting to provide any focus to my camera on my phone. I will report back when I get there if anyone is interested!

Picture in Picture with final cut express

I am really frustrated. How do a create a PiP (Picture in a Picture) with Final Cut Express This is so simple to do in adobe premier elements. You simple place one object over the other in the time line and drag with the cursor to resize. I searched in the manual, but I could not find any answers. I am relatively new user o FCE, so excuse me if I am asking a silly question!!!

That's the correct way David.
I originally thought you meant you were putting your cursor physically over the clip in the timeline and trying to drag it there, instead of in the Canvas !
Piero has made a free PIP filter that you might like to experiment with :-
http://web.mac.com/piero.fiorani/PieroFFCE_Effect/QuarterPIP.html
Message was edited by: Ian R. Brown

How is final cut express on colours?

Hi.
I am a new mac user and have worked for some time with adobe premier to edit movies..
Thinking about buying final cut express, and have a few questions about it. Does anyody know if it is easy to change colours in a clip? Or do i need to buy something like final cut studio 2 to have the colour program with?

There are numerous colour controls which I hardly ever use unless I want to alter the colour temperature of a clip or give it an unearthly appearance for special effect.
You will have no problems and won't require any other application.
You don't say which Premiere - I have Premiere 6.5 but never used it again after getting FCE.
Ian.

PrE 9 (Windows) vs. Final Cut Express 4 (Mac)

Hi,
I've managed to do real work with PrE 4 on my Sony laptop and have generated a few reasonably good videos for my purposes at work. I bought PrE 8 but never managed to make it work, even on a clean machine running Win 7. I've mentioned my trevails elsewhere on this forum.
I called Adobe direct sales, mentioned that it's reasonably common knowledge that PrE 8 doesn't work, and asked if there was any deal going to v. 9. As the final cost is only $79 after rebate, I wasn't surprised when they said no. But PrE 8 did not work at all for me. I got 0 utility out of it.
Still, my experience with PrE 4 keeps me hopeful and I have some investment in the Premiere Elements UI.
I am considering the following:
New Windows machine with PrE 9
New Mac with Final Cut Express 4
I quickly read some user reviews at Apple.com and it appears that even FCE4 has some issues, although those were short user reviews, not a forum like this with details and responses.
Anyways, is there anyone who can give me a high-level comparison of the two programs? I would like to move to AVCHD. I like the Avid-style interface. Is there another inexpensive alternative I should be considering?
Also, is Premiere Pro that much better? I would consider that but when I read about problems with video drivers, stability, etc., I assume those relate to a common code base between Pro and Elements. Also, my problems with PrE 8 have made me gunshy about dropping the bigger bucks with Adobe for Pro.
Thanks.
Steve

Well, you're asking to cover a lot in a brief forum post. Especially since it's a bit like comparing a sedan to an SUV to a pick-up to a minivan. They all have four wheels -- but which serves you best depends on your specific needs.
BTW, as I'm sure you're aware, Premiere Elements 9 is now available for the Mac too. So, although, at least in my experience, version 9 has fixed most of the bugginess of version 8 on the Windows platform, it also runs quite well on a Mac too. So that gives you another option.
Basically, Premiere Elements is a consumer program. It's got lots of pro features, but it's very user friendly and easy to work with.
Final Cut Express is just like Final Cut Pro, except without all the high-end features. Like FCP, Express can be challenging to learn. But, in my experience, I've not seen any bugginess with it.
Final Cut will digest pretty much anything you feed it. It also edits AVCHD very efficiently, since it does so using a proxy codec -- sort of a lower-rez preview file. The challenge is that this means that, when you want to output your project, it can take hours for the program to render it.
Both Premiere Pro and Final Cut Pro are used by professionals. Each has its own advantages. As I've said, Final Cut Pro has a lot in common with Final Cut Express -- but there are very few commonalities between Premiere Elements and Premiere Pro. They both edit video and look somewhat alike -- but comparing one to the other is like comparing a Honda Civic to a Mack truck. It's not really a fair comparison.
As for the bugginess you read about online -- I guarantee that there's not a program or computer system in the world that SOMEBODY hasn't reported issues with. The only true way to know if a program will work on your system or not is to download the free trial.
So -- if I can use the car metaphor one more time -- give them all a test drive. Only you know what's right for your needs.

Final Cut Express HD v Adobe Acrobat

Similar Messages

Maybe you are looking for