Final Cut Express not able to run on new MBP

I purchased my 2.4 GHZ 2GB RAM MBP in late March. Today I installed my previously purchased Final Cut Express 2. When I launched the application, the following error message came up and did not allow me to run the program:
Configuration error
The software requires certain hardware or software which is missing.
- AGP graphics card
All of the MBPs in the Apple store had FCE loaded on them and I was pretty clear to the salesman that I would be using this software (FCE) on the MBP. Any help would be greatly appreciated. Thank you in advance.

How old is the FCE? FCE had to be rewritten to work on the Intel Macs. I had to update versions that ran on G4 macs because they would not run on G5 versions. If this is a newer version of FCE that runs on Intel Macs, then I do not have a suggestion for you.

Similar Messages

I had final cut express 4 already installed on my new macbook but can't open it because it is asking for my serial number which is on the disc. I've put it in with and without dashes and dots and it won't accept it. What do I do?

I had final cut express 4 already installed on my new macbook pro at the shop but I'm trying to open it up and it wants my serial number. I've typed in the number on the disc labelled 'product serial number' but it won't accept it. The number has lots of dots and dashes in it and I've tried typing these as well, but to no avail. What can I do?

You do need the dashes.
Also double check that O & 0, I & 1 are not being confused.
The serial no. pretty much follows a three numbers then three letters approach.
Al

Final Cut Express not recognizing P2

Running FCE on on my iMac, camera gets to desktop no problem. When I open log and transfer, FCE does not read the files. I am shooting on HPX370P, and installed the drivers from the disc but they are not staying in my applications folder. Help!!

Sorry, Final Cut Express does not support P2. Not DVCPRO HD nor AVCintra. Log and Transfer is for AVCHD formats only.
Shane

Final Cut Express not recognizing firewire

I recently deleted my hardrive on my '04 iBook, and reinstalled all my software. I have Final Cut Express version 2.0.2, and upon reinstalling it, and firing it up for the first time, with my XL2 on and attached via firewire, the "External A/V" window pops up, and says "Unable to locate the following devices..." referring to the firewire connection. Now that always pops up when nothing's plugged in that's turned on, but this is the first time it's ever done this when my camera is plugged in and on. I went through every NTSC firewire setting on the "Easy Setup" window, but nothing changed. iMovie reads my XL2 just fine with the same firewire cable. This problem did not occur before I clean out my hardrive, and reinstalled everything. But prior to reinstallation my "capture" function was freezing up after 5 minutes, and said my "startup disc" was full. Any ideas on what the current problems is?

I'm experiencing the same problem. I have a macbook pro 2.4 GHz, using a Canon HV20. When I enter FCE is prompts me saying "Unable to locate following device: Apple Firewire NTSC." However using imovie, everything works fine, I'm able to capture images simply by turning on my camera.
Not sure if its a problem with my FCE, because I've tried to edit in FCE using video from imovie and it gives me an error message constantly.
any ideas?

Final Cut Express not opening, error says final FCE disks are missing.

Hi there,
Recently I got a WD Fire Wire 800 Hard drive for christmas so I could move all of my final cut projects over to the HD.
When I moved my final cut express documents including all of the folders it now says this error.
To preserve the integrity of the data used by final cut express, it is necessary to ensure the existence of the following paths;
- My HDD Chris is missing
Then it gives me the option to reset scratch disks, check again or quit.
So I'm not sure what I do.
Should I simply move back all the folders and documents that I moved to my hard drive (btw I tried this but it still gave the same error message). I have deleted final cut express 4.1 and re installed 4.0 to see if it works but it didn't and has the same error message.
Any tips would be helpful.
Chees, Chris.

Tom Wolsky wrote:
I can't even open FCE any more because I have moved everything onto the external hard drive including software 'everything'.
You moved the software? You can't do that. That's fatal. The software must be on the system drive as it requires system resources. Move the application called Final Cut Express back into the top level of the Applications folder. Do it move it, rename it, or put it inside a folder.
Do not assign the scratch disk to a folder anywhere. If you want the scratch disk to be on your external drive select the top level of the external drive. FCE will create the folders it needs in that location.
Hi,
When you say move the application final cut express into the application folder.
Do you mean move my folder of final cut express that I moved onto my HDD?
If so it's copying the 20GB folder as I speak. Hopefully fixes this frustrating problem..
Cheers, Chris.

Final cut express not opening

everytime i try to open final cut express, i get a message saying that the graphics card is missing. i thought all makes came with graphic cards. could my program be to out of date to use?

Deleting the preferences should not require you to re-register. Did you delete them correctly?
http://www.fcpbook.com/Misc1.html
After you trash the preferences launch the application not a project. Where exactly in the launch sequence does it fail?

Audio transitions in Final Cut Express--Not Allowing

I'm trying to drag and drop an audio transition (specifically, Cross Fade 0dB) in between two mp3s that I imported into Final Cut Express and which currently reside on the A1 and A2 audio tracks. When I attempt to do so, I get an "X" telling me that I can't. I have rendered everything that needs to be rendered, video and audio. What else do I need to do? All honest help appreciated. Screen shot available upon request.

Okay, done...this FCE is a picky b*&ch. Hope it's worth the trouble. It's my first day playing with it, but man, what a friggin' learning curve. Not to brag, but I consider myself gifted when it comes to computers...and this thing is giving me a headache...
While I have your attention, if you don't mind me throwing in an unrelated question, my iTunes has suddenly been experiencing slowdowns. I don't mean 0.5- to 1.0-second slowdowns. I mean 5-second slowdowns where the spinning carousel keeps me from doing anything. How can I research to see if I have inadvertently installed some software that is doing this BS? It is rather irritating!!

Final Cut Express Not Opening File

Hullo,
I bought Final Cut Express last weekend, and received it in the mail on Tuesday. I began using that night. When the night was through, I saved my project and shut my computer down. The next morning, I got up to go back to work on the project. When I opened the project file, Final Cut Express launched succesfully. However an error message popped up stating
"The project is unreadable or may be too new for this version of Final Cut."
I then closed out of that, and created another file with just one of the QuickTime sample files, I ran several edits on it, saved it, and quit. When I reopened it, it worked. So I restarted working on the first project. When I was done for the night, I saved it, and quit. I then just went to reopen it to make sure it worked, but it didn't. It brought up the same error message.
Any information or suggestions would be greatly appreciated.
Thanks,
Dmitry.

Thank you very much. I went in search of the Final Cut Express .PList, but it wasn't anywhere to be found on my computer. I had thought I had re updated everything recently, but apparently not. Final Cut Express 4.0.1 was one of the options. So I installed it and restarted my computer and launched my project file. It opened up the way it was supposed to, but it came up with a message that said that the project was from an older version and needed to be and could be updated to the new version. I did just that and now it works like a charm.
Thanks again for all of your help.
Dmitry

Final Cut Express-can it be run on a Core Solo mini?

Could Final Cut Express 4 be installed and used on a Core Solo Mac mini?

Yes, if it meets the minimum requirements laid out on the FCE web page. There will be some loss of functionality because of the lack of graphics card.

Final Cut Express - Not asking to auto-conform?

Here's the story -
I make videos for YouTube all the time, I currently film with a Canon Rebel T2i at 1920x1080 at 30fps. When I import my footage, I use MPEG Streamclip to convert it to Apple Intermediate Codec at 100% quality, and "1920x1080 (unscaled)". I never specify a framerate, it usually does it on its own. Whenever I put that footage into Final Cut Express (4.0.1), I drag it into the timeline and it asks me if I want to change the sequence settings to match the settings of that clip, and I always click yes, and it always works fine. However, today I wanted to try out some new settings on my T2i, and the ONLY different thing I did was change from 1920x1080 30fps to 1920x1080 24fps (and also changed some color settings to make it easier to color correct, but that should have no effect). I put the SD card into my computer, as I always do, put the footage into MPEG Streamclip, as I always do, changed the settings to Apple Intermediate Codec, 1920x1080 (unscaled), 100% quality, and no specified framerate, as I always do. The clip imported fine, as it always does. I put it into Final Cut, made a new project, opened the new sequence in the timline, and dragged my clip in. But I got no message asking to change the sequence settings, and the clip was in a square canvas, instead of changing to the normal setting one, which is wide. The quality was also highly reduced. This was abnormal for me, so I tried making a new sequence and importing an old 1920x1080 30fps clip, and sure enough the message popped up asking me to change the sequence settings. It worked fine, but then I tried again in a new sequence to import the NEW clip, and the popup ceased to appear again. I tried restarting my computer, reimporting the clip, checking for Final Cut updates, everything, to no avail. I just can't seem to get the new settings' clip to work.
My question is - why isn't Final Cut working with this clip's minor framerate change, and how do I get it to work again?
Thanks.
P.S. - I've tried looking in the preferences (editing tab) and checking the box to "Always" or "Ask", neither have made anything different.

wrong forum - the Final Cut EXPRESS forum is here:
Final Cut Express

It is possible to load final cut express from my G5 to my new MacBook Pro

I have a G5 with final cut express 2 upgraded to 4. I do not have the serial number for the express 2. Can I switch the program from my G5 to my MacBook Pro by sharing computers.

The SLA would only allow one computer at a time to have the software installed.

Final Cut Express HD transfer from Intel to new Retina MacBook Pro

Final cut express HD will not open on new macbook retina using my intel version serial number. Do I have to purchase it again!!?

RAM may be an issue, if you can upgrade it that may help.
Also, make sure all your Media is on an External Hard drive. It's not a good idea to have your media reading off the same drive as your Application.
You could also try Trashing your Preferences and see if that helps.
~Luke

Final Cut Express 4.0 | Cannot Capture from New Cannon Vixia HV40

My iMovie captures the footage fine. But the Final Cut Express doesn't see the camera at all - any ideas how i can actually use the Final Cut Express 4.0? Ive always been frustrated with it. even on my old camera there were Capture issues... so I gave up with it... I'm about to purchase either Final Cut Pro or Adobe Premier for my business and this is frustrating to the point where I'm leaning toward Adobe. I can't even get started! Haha
1. I opened the "Log and Capture" and there is no cameras showing.
2. My Camera is plugged in and turned on;
3. iMovie captures it fine;
4. I've read that the Cannon Vixia HV40 should show up on the desktop of my mac and it doesn't but iMovie sill recognizes it;
5. When I go into the Mac Preferences I can see the Cannon Vixia is connected by firewire

First trash your preferences. If you don't know how do a forum search.
How is the camera connected to the computer? Are there any other devices connected to the computer?
What settings are you using in FCE? Are you using the correct settings that match your media exactly?
1. Is the camera recognized when the application is launched?
2. Excellent. Is it in VCR mode, set to playback HDV and not downconvert?
3. That's terrific. Then you can use that media in FCE. Or you can learn how to do it in FCE.
4. Where did you read that? It's complete garbage. The Vixia HV40 is a tape based camera. They don't mount on the desktop.
5. You mean System Profiler? Or something else?

Final Cut Express 2 won't run on iMac G5 ("iSight")?

Recently installed FCE2, (educational version that my college owns).
Every time I start FCE2 for the first time, it reports a "Configuration error: This software requires certain hardware or software which is missing. AGP grahics card" With the only option, a Quit button.
But my iMac G5 has PCI video.
I've run Software Update, but problem persists. Does that mean it's incompatible with an iMac G5? Is there a patch I can obtain that allows it to work?

Click here and follow the instructions.
(23552)

Can you pre key other colours in final cut express not just black?

hey there i make little movies with muzzle flashes and stuff.
i was wondering if you can pre key fpptage thats not just a black background?
so if you can take purple or green backgrounds out not just black!
if you dont understand what i mean reply saying so.
please reply ive wanted to know for a verry long time.

Yes, use Chroma Key:
http://www.youtube.com/watch?v=9FCOMgcPMMY
MtD

Final Cut Express not able to run on new MBP

Similar Messages

Maybe you are looking for