Final cut express not opening

everytime i try to open final cut express, i get a message saying that the graphics card is missing. i thought all makes came with graphic cards. could my program be to out of date to use?

Deleting the preferences should not require you to re-register. Did you delete them correctly?
http://www.fcpbook.com/Misc1.html
After you trash the preferences launch the application not a project. Where exactly in the launch sequence does it fail?

Similar Messages

Final Cut Express not opening, error says final FCE disks are missing.

Hi there,
Recently I got a WD Fire Wire 800 Hard drive for christmas so I could move all of my final cut projects over to the HD.
When I moved my final cut express documents including all of the folders it now says this error.
To preserve the integrity of the data used by final cut express, it is necessary to ensure the existence of the following paths;
- My HDD Chris is missing
Then it gives me the option to reset scratch disks, check again or quit.
So I'm not sure what I do.
Should I simply move back all the folders and documents that I moved to my hard drive (btw I tried this but it still gave the same error message). I have deleted final cut express 4.1 and re installed 4.0 to see if it works but it didn't and has the same error message.
Any tips would be helpful.
Chees, Chris.

Tom Wolsky wrote:
I can't even open FCE any more because I have moved everything onto the external hard drive including software 'everything'.
You moved the software? You can't do that. That's fatal. The software must be on the system drive as it requires system resources. Move the application called Final Cut Express back into the top level of the Applications folder. Do it move it, rename it, or put it inside a folder.
Do not assign the scratch disk to a folder anywhere. If you want the scratch disk to be on your external drive select the top level of the external drive. FCE will create the folders it needs in that location.
Hi,
When you say move the application final cut express into the application folder.
Do you mean move my folder of final cut express that I moved onto my HDD?
If so it's copying the 20GB folder as I speak. Hopefully fixes this frustrating problem..
Cheers, Chris.

Final Cut Express Not Opening File

Hullo,
I bought Final Cut Express last weekend, and received it in the mail on Tuesday. I began using that night. When the night was through, I saved my project and shut my computer down. The next morning, I got up to go back to work on the project. When I opened the project file, Final Cut Express launched succesfully. However an error message popped up stating
"The project is unreadable or may be too new for this version of Final Cut."
I then closed out of that, and created another file with just one of the QuickTime sample files, I ran several edits on it, saved it, and quit. When I reopened it, it worked. So I restarted working on the first project. When I was done for the night, I saved it, and quit. I then just went to reopen it to make sure it worked, but it didn't. It brought up the same error message.
Any information or suggestions would be greatly appreciated.
Thanks,
Dmitry.

Thank you very much. I went in search of the Final Cut Express .PList, but it wasn't anywhere to be found on my computer. I had thought I had re updated everything recently, but apparently not. Final Cut Express 4.0.1 was one of the options. So I installed it and restarted my computer and launched my project file. It opened up the way it was supposed to, but it came up with a message that said that the project was from an older version and needed to be and could be updated to the new version. I did just that and now it works like a charm.
Thanks again for all of your help.
Dmitry

Final Cut will not open up? Help

Hi all,
I have many projects on in final cut pro. I went to open it up this morning and final cut will not open. I see it trying to load and then it does not open. Can anyone please give me any ideas on what the problem might be.
Thanks,
Wildmangoose

Well, you first need to determine whether it's Final Cut that won't open, or just one project. To determine that, you can either trash the preferences or create a new user Account and log into it, then try opening Final Cut from the new Account.
If it opens, then you know FCP is OK. If you've done that with a new Account, then log in to your original Account, and take the media volume offline. I'm assuming you have all your media on a separate volume from your boot volume.
With the media volume offline, try to open that project in Final Cut. If it opens, then you have a corrupted media file, either a captured file or a rendered file.
You then then to find the corrupted file by the process of elimination. More on that later. For now, try the first step and report back.

Final Cut to NOT open on older project every time

Is there a way to have Final Cut Pro NOT open on the last project all the time. Sometimes I just want it to open fresh without taking 5 minutes (exaggeration) to open the last project I worked on. Thanks so much!

I should have seen that. Thanks. Although what I really want is an option like when you open Aperture or iTunes with the option key held down you can select what library to open instead of the default. Usually I want it to open the last project but sometimes I don't and it is a pain to have to wait for it to open all the timelines and then close them all down again. I know..... I want I want I want. Thanks!

Final cut will not open within certain accounts

Hi
First post and mac experience limited but I have Final Cut Express HD which worked fine on a suite of standalone imacs. I have just rebuilt them onto a mac network with a local install of FCE. When I logon as admin, FCE will open no problem but when I logon with a standard user network account it will display the splash screen then disappear. However, not all standard accounts have this problem as some users on this mac have no such problem accessing FCE, this seems to rule out a permissions problem. Any help gratefully accepted.

When you say you rebuilt them onto a Mac network, what exactly do you mean? Do you have a Mac running OSX Server (like an xServe) with client users having accounts assigned by Workgroup Manager? ie, they are not logging on to the local machine, they are logging on to their network account? If so, check their permissions in Workgroup Manager, are they allowed to run FCE?
Also, what version of FCE do you have installed.
And is there a separately licensed installation on each client Mac? FCE will not run 'networked' from a server and you cannot have multiple users on the same FCE serial number on a network.

Final Cut Express not recognizing P2

Running FCE on on my iMac, camera gets to desktop no problem. When I open log and transfer, FCE does not read the files. I am shooting on HPX370P, and installed the drivers from the disc but they are not staying in my applications folder. Help!!

Sorry, Final Cut Express does not support P2. Not DVCPRO HD nor AVCintra. Log and Transfer is for AVCHD formats only.
Shane

Final Cut Express not able to run on new MBP

I purchased my 2.4 GHZ 2GB RAM MBP in late March. Today I installed my previously purchased Final Cut Express 2. When I launched the application, the following error message came up and did not allow me to run the program:
Configuration error
The software requires certain hardware or software which is missing.
- AGP graphics card
All of the MBPs in the Apple store had FCE loaded on them and I was pretty clear to the salesman that I would be using this software (FCE) on the MBP. Any help would be greatly appreciated. Thank you in advance.

How old is the FCE? FCE had to be rewritten to work on the Intel Macs. I had to update versions that ran on G4 macs because they would not run on G5 versions. If this is a newer version of FCE that runs on Intel Macs, then I do not have a suggestion for you.

Final Cut will not open!!!!

I finished a 4 minute video yesterday and properly saved the project. Today I cannot open Final Cut Express. The program attempts to open, I see all windows except for the canvas then a window pops up that says Final Cut Express has unexpectadly quit. Am I going to lose this project???(lots of work) I am running Final Express 1.0 on an eMac with plenty of room on the hard drive.
Mick
eMac G4 Mac OS X (10.2.x) Final Cut Express 1.0

I'm having a really hard time finding my FCE preferences... any tips??!!
eMac G4 Mac OS X (10.2.x)
eMac G4 Mac OS X (10.2.x) Final Cut Express 1.0

Final Cut Express - Not asking to auto-conform?

Here's the story -
I make videos for YouTube all the time, I currently film with a Canon Rebel T2i at 1920x1080 at 30fps. When I import my footage, I use MPEG Streamclip to convert it to Apple Intermediate Codec at 100% quality, and "1920x1080 (unscaled)". I never specify a framerate, it usually does it on its own. Whenever I put that footage into Final Cut Express (4.0.1), I drag it into the timeline and it asks me if I want to change the sequence settings to match the settings of that clip, and I always click yes, and it always works fine. However, today I wanted to try out some new settings on my T2i, and the ONLY different thing I did was change from 1920x1080 30fps to 1920x1080 24fps (and also changed some color settings to make it easier to color correct, but that should have no effect). I put the SD card into my computer, as I always do, put the footage into MPEG Streamclip, as I always do, changed the settings to Apple Intermediate Codec, 1920x1080 (unscaled), 100% quality, and no specified framerate, as I always do. The clip imported fine, as it always does. I put it into Final Cut, made a new project, opened the new sequence in the timline, and dragged my clip in. But I got no message asking to change the sequence settings, and the clip was in a square canvas, instead of changing to the normal setting one, which is wide. The quality was also highly reduced. This was abnormal for me, so I tried making a new sequence and importing an old 1920x1080 30fps clip, and sure enough the message popped up asking me to change the sequence settings. It worked fine, but then I tried again in a new sequence to import the NEW clip, and the popup ceased to appear again. I tried restarting my computer, reimporting the clip, checking for Final Cut updates, everything, to no avail. I just can't seem to get the new settings' clip to work.
My question is - why isn't Final Cut working with this clip's minor framerate change, and how do I get it to work again?
Thanks.
P.S. - I've tried looking in the preferences (editing tab) and checking the box to "Always" or "Ask", neither have made anything different.

wrong forum - the Final Cut EXPRESS forum is here:
Final Cut Express

Audio transitions in Final Cut Express--Not Allowing

I'm trying to drag and drop an audio transition (specifically, Cross Fade 0dB) in between two mp3s that I imported into Final Cut Express and which currently reside on the A1 and A2 audio tracks. When I attempt to do so, I get an "X" telling me that I can't. I have rendered everything that needs to be rendered, video and audio. What else do I need to do? All honest help appreciated. Screen shot available upon request.

Okay, done...this FCE is a picky b*&ch. Hope it's worth the trouble. It's my first day playing with it, but man, what a friggin' learning curve. Not to brag, but I consider myself gifted when it comes to computers...and this thing is giving me a headache...
While I have your attention, if you don't mind me throwing in an unrelated question, my iTunes has suddenly been experiencing slowdowns. I don't mean 0.5- to 1.0-second slowdowns. I mean 5-second slowdowns where the spinning carousel keeps me from doing anything. How can I research to see if I have inadvertently installed some software that is doing this BS? It is rather irritating!!

Final Cut Express not recognizing firewire

I recently deleted my hardrive on my '04 iBook, and reinstalled all my software. I have Final Cut Express version 2.0.2, and upon reinstalling it, and firing it up for the first time, with my XL2 on and attached via firewire, the "External A/V" window pops up, and says "Unable to locate the following devices..." referring to the firewire connection. Now that always pops up when nothing's plugged in that's turned on, but this is the first time it's ever done this when my camera is plugged in and on. I went through every NTSC firewire setting on the "Easy Setup" window, but nothing changed. iMovie reads my XL2 just fine with the same firewire cable. This problem did not occur before I clean out my hardrive, and reinstalled everything. But prior to reinstallation my "capture" function was freezing up after 5 minutes, and said my "startup disc" was full. Any ideas on what the current problems is?

I'm experiencing the same problem. I have a macbook pro 2.4 GHz, using a Canon HV20. When I enter FCE is prompts me saying "Unable to locate following device: Apple Firewire NTSC." However using imovie, everything works fine, I'm able to capture images simply by turning on my camera.
Not sure if its a problem with my FCE, because I've tried to edit in FCE using video from imovie and it gives me an error message constantly.
any ideas?

Final Cut express wont open after Lepard Install

I just installed Lepard to my mac and Final cut wont open...its gone dead, I find out the my version of FC express is 3.5.1, I have been having a few different things happen within the last 72 hours of the install,My dock sometimes doesnt respond,I need some adviser on the Final Cut issue, I have work in there and I need to access it...Help,
itsonlyme...

Every instance is different. There is no single fix for everyone.
Start here:
http://www.fcpbook.com/Video10.html
Then come back and do this:
Please give your full system specifications, what computer, what drives, what camera or deck, how everything's connected, what settings are on the media, what settings you're using in FCE, and finally what version of the software, of the OS, and of QT are you using?

Using Final Cut Express to open AVCHD files?

Just wondering if anyone has experience using FCE to open AVCHD files (particularly from Canon camcorder.) I've tried iMovie (08) but was super slow (on my 1.83mhz machine - 2GB of ram, external disk for movie/audio files) and quality was terrible.
Appreciate any comments on this,
Neil

The project comes from FCP 6.0.1 and I have FCE 4.0. Opening the project file doesn't work, and I tried exporting to XML, and it finds the media, but doesn't know how to create the sequence.
I can send more specific error messages if you need them.
(Also, I notice that iMovie write v1 of the XML, and FCP is up to v4.)

Can you pre key other colours in final cut express not just black?

hey there i make little movies with muzzle flashes and stuff.
i was wondering if you can pre key fpptage thats not just a black background?
so if you can take purple or green backgrounds out not just black!
if you dont understand what i mean reply saying so.
please reply ive wanted to know for a verry long time.

Yes, use Chroma Key:
http://www.youtube.com/watch?v=9FCOMgcPMMY
MtD

Final cut express not opening

Similar Messages

Maybe you are looking for