Final cut express-photo??

Does anyone know if you can capture a frame and make it into a photo??

Export QT Conversion/Movie to Photo.

Similar Messages

Capturing Photos onto Final Cut Express

Where my Emac is not connected to the Internet, how do I capture photos to put into a Final Cut Express project?

You import photos into FCE, not capture them. (File > Import)
It's not necessary for your Mac (eMac or otherwise) to be connected to the internet unless you are trying to download photos from a website. Is that what you want to do?

Photos used in Final Cut Express

WHen I include photos from iPhoto in my Final Cut Express movie and put the movie to DVD; some of the photos displayed on the TV are good while others are distorted and jump or flicker while displaying. It appears that the ones that are 800K or less display good while those that are about 2GB are the problem. Apple care told me that the photo resolution when taken photos to use in Final Cut Express HD should be set at 720x480 or there abouts.. No where in any documentation can I find this information. Even when I put in a call to the Final Cut Express technical help they could give me an answer. Can anyone help with this... MY DV camcoreder clips display perfectly.. Ken Landgraf

(I'll assume you meant 2MB, not 2GB, Ken.)
I also expect you are talking about distortions when you zoom and pan the photos. 720x480 is okay for still photos and it resolves to about the resolution of a TV screen. If you want to zoom in, you should guess the magnification and approximate the dimensions so that the zoomed portion resolves at about 720x480. A 2MB photos is likely to be from a 4megapixel camera (highest resolution setting) and 2300x1700 pixels.
Note that a 'still' photo in FCE will usually look sharper than on a TV because of the whole chain of 1950s technology that produces a TV image.
If you are commenting on distortions you see when watching your video in FCE, you really need to 'render' the video and watch it on a TV monitor. 'Jumpiness' can be an artifact of the RT rendering or (lack of) TV interlacing.
If you are zooming in/out of images and you're seeing lots of sparkly artifacts, like shimmering on water ripples, try adding a 'gaussian blur' and/or 'flicker' filter to a clip. Either will soften artifacts without much blurring of either the zooming image.

I'm trying to make "Stop motion videos" in Final Cut EXPRESS by using 100's of still photos and setting them to music. They are coming out blurry if viewed larger than 4x6 in size

I'm trying to make "Stop motion videos" in Final Cut EXPRESS by using 100's of still photos and setting them to music. They are coming out blurry if viewed larger than 4x6 in size.
I don't understand why this is happening.

Quick follow up, since I was on my phone earlier and am back to a real keyboard.
To access Easy Setup, hit Control Q.
If you click on the blue discosure triangles, a dropdown menu with about a dozen different presets will be displayed. Select the one you want, (Here, I've selected 720P.)
Whatever you select for a preset will not be applied until you make a new sequence. (I don't like to have sequences with different properties in the same project so I prefer to make a new project if I change the Easy Setup.)
Because photo aspect ratios are different than video, I typically put a solid generator of some compatible color on the first track (v1) and put my photos on the track above (v2). Looks better, IMO, than black bars. There are other creative ways to display them. And of course, you could scale them up to fill the frame…but then you probably would have to re-position them.
Good luck.
Russ

To import 1 photo have to close Final Cut Express to

Since upgrading to Lion I now have to close down Final Cut Express each time I wish to import another photo from iphoto. I can import the 1st photo fine. But if I try to import another the Choose button is greyed out so I have to close down the app each time I want to mport another photo and start it up again. This is a pain. Why can't I select a load of photos and import them all at once?

Thanks Alchroma. This was not so easy as your reply made it seem. Creating a folder in Iphoto simply seemed to create another Album. As I already had an album with the photos in it I tried to import the Album. What I had not realised was that in the frame above the photos was the list of Albums already and I had to highlight the Album first before choosing the photos I wanted to import. So I got there in the end. Thanks.

Final Cut Express, latest (last) version, Pixelation: Both .mov files and photos

I've been using mpegstream clip to convert my mpegs to AIC .mov files. They are pixaleted in canvas but look sharp in viewer. Cannot seem to fix - exceedingly frusterated (today's my birthday (seriously), I'm trying to finish a project, but am instead writing this - I've spent more time trying to figure out how to make this work than I've spent working on the project).
Same issue for photos. Oddly, I could originally bring in JPEGs and they looked blurry. Then I tried resizing (I am aware of the pixel size difference issue) - worked for a while. Then for no apparent reason all of my photos were sharp, and now none, no matter what I do to resize.
The tools I have to work with:
Final Cut Express
Appreture
Iphoto
Whatever came with my Mac
I do not have photoshop.
I would be very grateful for any help solving this problem.
Thank you.
Tobias

MtD -
First, thank you for responding. Although I've read these conversations avidly, this is my first foray into any online question and I am seriously grateful for the response.
I've posted the browser properties first and the Sequence clip properties second.
Sequence:

Final Cut Express moving videos off hard drive

So I started capturing some footage on my laptop because I didn't have an external drive available. I finished the project, and now I'm back home with my external drive. My internal drive had 1.5 gigs free now, and I want to move all the footage I captured from FCE onto the external.
I know iMovie has an option to export the project and all the files into a single file. Does FCE have an option like this, or do I need to go through finder to where it saved all the footage and move them like that? How can I do this without losing all the links and having to reconnect my media...
hopefully this all makes sense, I've never really used FCE

Hello Drew,
FCE doesn't have that option. You will have to use the Finder to copy the folders/files to your external drive and yes you will have to Reconnect Media after moving the files.
Be sure your external drive is formatted as Mac OS Extended and is connected via Firewire.
In FCE, close your Project. Then in FCE preferences reset your scratch disk location to the new Final Cut Express Documents folder on your external drive. Then exit FCE.
The default FCE scratch disk location is /Users/yourusername/Final Cut Express Documents. Normally your FCE project file and related material is in this folder. Under it you will find the following folders:
Autosave Vault
Capture Scratch
Render Files
Waveform Cache
Thumbnail Cache
and there may be an Audio Render Files folder too
At this point you should be able to find a Final Cut Express Documents folder on your external drive; it should have automatically been created when you reset your FCE preferences earlier, along with an Autosave Vault and a Capture Scratch folder. Copy the files from your internal drive's Autosave Vault and Capture Scratch folders to the corresponding new folders on your external drive. Don't bother copying the render files or cache files - it will be better to re-render after you move your project. Also, if you have any other source media such as photos or music, copy them to a new folder on your external drive. Keep your FCE project file on your internal hard drive but do make a backup copy of it somewhere.
After copying everything, verify & double check that you have good copies of your clips on your external drive because the next step is to delete the originals of your captured clips that are on your internal drive. Don't delete any folders, just the captured clips themselves ... and all the render files. This is necessary so that when you reopen your FCE project it will be forced to reconnect media and you can point it to the new location on your external drive. Otherwise it will just continue to use the clips that are on your internal drive.
Then reopen your Project File that you left on your internal drive and reconnect media when prompted.

Canon GL2 is not recognized by Final Cut Express

I am trying to capture from my Canon GL2. I hook up the fire wire but neither I-Movie or Final Cut Express seem to recognize the connection.
Any Suggestions?

Hi
My general list on this.
*NO CAMERA or A/D-box*
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable *very often the problem maker*.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing eg NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odwenGB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Trouble capturing footage to final cut express

hey this is quite urgent....
i am trying to upload footage to final cut express from my sony DCR-HC52E. it sais VTR OK and plays and pauses and stuff but i cannot see anything it just stayed on those coloured bars.
i can see it playing on the camera though...
i got it working once with this camera, just cant remember how
any help would be greatly appreciated!

Hi
My table for this was once for iMovie - BUT it's more General than that so You might find help here.
*NO CAMERA or A/D-box*
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable *very often the problem maker*.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing eg NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odwenGB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Iphotos into Final Cut Express?

How do I import photos from iphoto into Final Cut Express to make a hi-end slide show? I'm new to FCE, so I appreciate any help you guys could give!

Carolyn
Personally, I did use PhotoToMovie quite a lot. It has a nnice clean interface. I checked out the Fotomagico a few times, but the app seemed fussy and cluttered (YMMV). However, I needed to do a big project last autumn using a little animation (largely done with wipes) as well as the slides and I finally got - to some degree - comfortable with FCE.
Where FCE really began to shine was after the big work was done. We had a slideshow with motion graphics (pan and scan) plus a narration. When the client wanted to drop a sentence from the narration and change another it was a few seconds work. Literally. For that kind of control there is nothing in PhotoToMovie or the other apps that will even come close.
My advice is -and this and a dollar together might pay for a coffee - is to stick with FCE. When you have a problem it has many more ways to solve it than the others. Further, for my money, the time it takes to learn the app is well repaid: remember the learning you do on the montages will also feed into the video work and vie versa. You'll be learning one tool, not two.
Regards
TD

Uploading Hi8 Videos into Final Cut Express

Hi,
I am having trouble uploading H8 video files into Final Cut Express.
What I have is:
Sony Player SLV-T2000
Canopus didital converter ADVC-100
I have connected the rca cables from the player to the digital recorder and then the firewire cable from the digital converter to the Macbook Pro. Also the digital convertor is set for analogue in.
When I play the Hi8 tape I can see the video in the viewer but it will not capture.
Can someone advice me where I am going wrong.

Hi
May be You find something here (it's not only for iMovie but FCE/P too)
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

HT2948 I have a Sony DCR-PC100 is it supported by final cut express?? wilth

I have a Soney DCR-PC100 is it supported by final cut express ?? what 'p' will they convert to??

Hi
Just my notes - for iMovie - but they go to 99% for FinalCut too.
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Importing video from Sony HDR-SR12 to Final Cut Express 4.0

I have an iMac (iMAC5,1), Intel core 2 duo, 2 GHz processor speed and 1 Gb memory. I have a new Sony HDR-SR12 camcorder. I attempted to import the video to my iMovie 07, but was unsuccessful. I also attempted to import this video to my Final Cut Express 4.0 but had no luck either. I have no trouble importing my photos from the camcorder to PC, why such an issue with the video? Is there something I can do? I have heard that HD video is not compatible with iMovie 07, but shouldn't it work with Final Cut Express 4.0 or is it my iMac hardware?

In short, none of the above.
iMovie '07 and FCE4 are both compatible with HD video, and so is your iMac. If you would like us to help, it would be nice to know your workflow. How are you attempting within FCE to import the footage? Provide us some details here to work with and maybe we can be of more help.

Sharing Editing Duties Using Final Cut Express 4.0

I'm fairly new to Final Cut Express. I'm working on a video project with a colleague. He has been working on the project for some time on his Mac. How can I copy his files to aloow me to continue editing the project on my Mac. What files & directories must be copied?
Doug

Hi
I do
a. You must have exactly same version of FinalCut on each Mac (but Your own licenses of course)
One can not have FCE 3 and one FCE 4 or FC-Pro on the other/s.
b. I use an external hard disk
• MUST BE Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange will not work for VIDEO !
• SHOULD be a FireWire one - as USB/USB2 performs badly
c. I make a new folder on this ext. hd, and in this I Direct ALL - Scratch disks, FC-movie project document, all photos used and all extra audio so it contains as follows
• Audio Render Files
• Autosave Vault
• Captured Scratch
• MOVIE PROJECT DOCUMENT
• Thumbnail Cache Files
• Wavform Cache Files
to this all needed material as
• Photos
• Audio
• Texts and documentations (my movie notes and structure)
Then I move this external HD in between locations and reconnect media to be able to cont. the project building.
Yours Bengt W

How do I export a Final Cut Express 4 movie using quick time conversion without stretching the image?

I have created a movie in Final Cut Express 4 using videos and still photos of various aspect ratios and resolutions. Some of the photos are verticals. When I try to use File>Export>Using Quick Time Conversion, my images end up being stretched horizontally when the video is finally processed. I have tried preserving the aspect ratio but the video still ends up stretched horizontally. What should my settings be in Quick time conversion? I just want to make a video for YouTube.
Thanks. -Bob

If you shoot in one of the following modes you should be able to Log & Transfer directly into FCE:
HD: 1920x1080/60i (FX or FH mode)
HD: 1440x1080/60i (HQ or LP mode)
SD: 720x480/60i
1080/60p (PS mode) seems to be the default mode in your camcorder. FCE only supports progressive video in 720p50 or 720p60. That's probably why you have had to import via iMovie.
It would be better to upgrade to Final Cut Pro X, the version currently supported. FCE was discontinued over 18 months ago and is not supported on Lion or Mountain Lion.

Final cut express-photo??

Similar Messages

Maybe you are looking for