Final Cut Express Shuts Down on Lanuch
Hey all,
I've been trying to get Final Cut Express to work with Leopard since I bought Leopard a few weeks back. Even with the update tonight, it still shuts down unexpectedly. Any ideas?
Thanks!
Did you do a clean erase and install of the new operating system? How did you get to Leopard? If you just did an archive and install or a simple upgrade it most likely will not work properly. I have been using FCE and FCP with Leopard since it was released and have not found a significant problem in the applications, other than those that were already there.
Similar Messages
-
Final Cut Express Shuts down right after capturing
Hello all:
I am using FCE 3.5. I have used this for about a year now and I have developed a problem with FCE shutting down right after I hit escape. I run a lab for a university and it is doing it on ALL of them so it isn't an isolated incident. I repair permissions, reset the PRAM, trashed the prefs and I don't know what else to do.
I am running imac G5's using 10.4.11 and the new imacs running leopard. Both sets are doing it.
Any help would be appreciated since our classes start soon.
Thank you.Can you tie the crashes to a recent event: a software update, a new piece of hardware? What else is connected to the computers?
(You have, of course, triple-checked that the FCE Easy Setup matches the footage you're capturing, yes?)
After the program crashes, is the captured footage saved?
What's the lab setup? Does each student have an individual user account? On each computer?
Lots of questions, I know...
Here's a suggestion:
Use Disk Utility to repair permissions. Create a new admin account on one computer. Set the FCE Scratch Disk to the internal drive. Disconnect everything but the camera. Try to capture. See what happens. -
I edit movies onMac OS X using Final Cut Express and down load to desk top in .mov format. How do I load finished movie to i pad 2? i tunes will not transfer it. Thanks, stevefromnorthfreo
Try outputting it as a MP4 or M4V
If Final Cut won't output it, Mpegstreamclip will convert it. So will Quicktime if you have the pro version. -
Final Cut Pro shuts down/crashes at launch
I never had problems launching Final Cut before. I haven't touched it for about a month, I tried to launch it today. It runs through the splash page where its loading the program -- asks me where my External A/V device is if it's not on -- then I either turn it on and click 'check again' or just click 'continue' either way it finishes loading and the splash screen disappears... then nothing. Final Cut just doesn't launch. I have no idea what's wrong, I would really appreciate help on this, I can't do anything right now
iMac
2.66GHz Quad-Core Intel Core i5
4GB 1066MHz DDR3 SDRAM - 2x2GB
1TB Serial ATA Drive
ATI Radeon HD 4850 512MB
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Processor Interconnect Speed: 4.8 GT/sFirst, it's always a mistake to do any updates to your system regardless of whether they have anything to do with fcp UNLESS you have backed up your system startup drive using a cloning utility. This will allow you to quickly restore your system to it's working state if something goes south.
for deleting preferences:
http://www.digitalrebellion.com/pref_man.htm
This is almost always the first troubleshooting step.
Good luck. Post back and let us know how things work out. -
Final Cut Express Serial with broken Mac
I bought Final Cut Express but lost the computer first (hard disc failure, not recoverable) and then my pack for the software with the serial. I do have a serial for Final Cut Express written down but it does not seam to work. Any idea what I can do?
PS I tried to contact Apple online but wasn't able to find any address where I can write my stuff to. I have a proof of purchase but whom can I ask? The support site looks like a labyrinth.
Message was edited by: AndreasLoefflerSee these:
http://support.apple.com/kb/TS2005
http://support.apple.com/kb/ht1861
MtD -
Final Cut Express Opens and Shuts Down?! HELP!!!
Hi there,
I recently purchased Final Cut Express 2.0 and installed it onto my computer. After running into numerous glitches, I upgraded to FCE 3.5.
I installed FCE 3.5 and LiveType and Soundbooth both are working great. However, when I open FCE, it begins to open and starts to load. You assume it is going to load in, but then the screen disappears and you are back to the desktop.
I have deleted the preference files from the library, figuring that would be the solution. However, it seems as if that still has not solved my problem. I also tried Reparing Disc Utilities AND I tried re-installing just Final Cut Express after deleting the files that I thought might have been corrupt.
Can anybody lend some advice as to what else I might try? If you have steps on how to do these things, that'd be great, too.
The apple support people that I called said I should come on here, so please do not advise me to call Apple.
THANK YOU!!!!Try trashing the preferences again making sure you delete ALL of them as described in this article by Tom:-
http://www.fcpbook.com/Misc1.html
If FCE still does not work, try reinstalling again but make sure you first of all UNINSTALL COMPLETELY like this :-
http://docs.info.apple.com/article.html?artnum=301182
You can ignore the LiveType and Soundtrack items.
Ian. -
Can you explain when using keywords and addding them to various clips pressing ctrl and a number eg. 1 or 2 it simply closes down FCPX. Just to the dock as would the yellow -sign. I am new to this program having only used Final Cut Express 4 previously.
iMac (early 2009) 24in 2.93GHz 4GB 1066MHz DDR3 SDRAM (To be upgraded ot 8GB in the nextfew days) os x 10.7.2 Lion
Re: Why don't my arrows on the time line operate and allow me to move to the start and end of the timeline. Iam using the trial versionCheck System Preferences. I think Control-1 is used by something in the OS now. Switch it off. It's a major p[ain the way the OS is taking over more and more of the keyboard, allowing less options for application use.
-
Serial Number for Final Cut Express 3.5 upgrade is lost in melt down
After a major melt down of logic board, internal and external hard drives I am trying to reload programs. I have loaded final cut express 3.0 and when I try to load my 3.5 upgrade it asks for a serial number. Even though I have the packaging it came in I can not find the number. I registered the software and would like to know if there is a location with Apple I can find the software I have registered and get the serial number from that. Or any other way to find it.
Apple customer service was very good and had the serial number within 2 days. Thank you for the suggestion.
-
The Resolution goes down when i add my video to Final Cut Express.
When i add my video from my Sony HD Camera to Final Cut Express, the HD resolution goes down from 1920 X 1080 to 720 x 480, is there any way to prevent this from happening?
Mr.Erdogan wrote:
.. the HD resolution goes down from 1920 X 1080 to 720 x 480, ..
in FCE, you have to set the resolution of your 'project' manually.
you did choose 'Standard' (720x480)
now, when you add HiDef to a SD 'sized' sequence, it has to get downscaled..
ctrl-('right')-click your sequence, choose Settings
click Load Sequence Presets
select a 'HiDef' one, as AppleIntermediate '1920x1080/60' (I suppose, you're in the US?) -
Slowing clips down in final cut express hd
how do you slow clips down in final cut express hd. i can't figure this out and i can't find anything online to help me, so please explain how i do that.
thanks.yeah and if the mouse is tired and sleeping or asleep or whatever, you can invoke the command j (command=apple key) keyborad shortcut - dont forget to select (click on) the clip you want to work on first.
(heck, that probably means waking up the mouse...)
...work is the curse of the drinking classes... -
Trouble opening Final Cut Express
I'm borrowing a friends imac while my macbook pro is off for service. When I first got it the Final Cut Express worked perfectly. Now whenever I try to open Final Cut Express I get the message that the camera is not connected and when I tell it to continue it shuts down suddenly. I've tried to open it with the camera connected but it does the same thing. I've also tried to click on a saved project and open it but that didn't work either. Does anyone have any idea of what might be going on?
ThanksThanks for answering. The imac is a 1ghz pc g4 with 256 ram. The Final Cut Express says that is version 1.0 (not for resale) so it must have come loaded on there from apple. I'm not sure how I could trash the preferences. The program doesn't stay open long enough for me to get in there. I tried to go to preferences when the message came up that it couldn't find the camera but it was grayed out. And once I click on continue that's when it closes down.
-
I have a powermac and powerbook. Lately final cut express locks up on me. I cannot click on the file, edit and all the menus on the top of the screen.
i also cannot type any numbers in any filter settings or speed settings. I have to shut down final cut epress and start it up again and it works for a little while and freezes up again.Sorry, wrong forum:
http://discussions.apple.com/forum.jspa?forumID=936
This is the Final Cut Pro forum.
Shane -
Final Cut Express HD Shutdown Problem!
I duno why when I open up the program, it loads, and after awhile, it was shut down and there is nothing on the finder. Please help! I have assignment to catch up!
Tried reinstalling it but to no avail.These are the only files you need to delete:
Location and File or Folder to Delete.
HD/Applications
Final Cut Express
HD/Library/Application Support
BorisFX
Boris FX
Final Cut Express Support
HD/Library/Application Support/ProApps
Final Cut Express System ID
HD/Library/Preferences/
com.apple.RegFinalCutExpress.plist
HD/Library/QuickTime/
AppleIntermediateCodec.component
DesktopVideoOut.component
FCP Uncompressed 422.component
HD/Library/Receipts/
AppleIntermediateCodec.pkg
FinalCutExpress.pkg
FinalCutPro.pkg
ProRuntime.pkg
Users(Your name)/Documents/
Final Cut Express Documents
Users(Your name)/Library/Preferences/
com.apple.FinalCutExpress.plist
Final Cut Express User Data -
Final Cut Express Not Opening File
Hullo,
I bought Final Cut Express last weekend, and received it in the mail on Tuesday. I began using that night. When the night was through, I saved my project and shut my computer down. The next morning, I got up to go back to work on the project. When I opened the project file, Final Cut Express launched succesfully. However an error message popped up stating
"The project is unreadable or may be too new for this version of Final Cut."
I then closed out of that, and created another file with just one of the QuickTime sample files, I ran several edits on it, saved it, and quit. When I reopened it, it worked. So I restarted working on the first project. When I was done for the night, I saved it, and quit. I then just went to reopen it to make sure it worked, but it didn't. It brought up the same error message.
Any information or suggestions would be greatly appreciated.
Thanks,
Dmitry.Thank you very much. I went in search of the Final Cut Express .PList, but it wasn't anywhere to be found on my computer. I had thought I had re updated everything recently, but apparently not. Final Cut Express 4.0.1 was one of the options. So I installed it and restarted my computer and launched my project file. It opened up the way it was supposed to, but it came up with a message that said that the project was from an older version and needed to be and could be updated to the new version. I did just that and now it works like a charm.
Thanks again for all of your help.
Dmitry -
Just installed Final Cut Express 4 but doesn't open
Hey I'm a dummy but....Just installed Final Cut Express 4 but doesn't open tells me I don't have the AGP graphics card,my ATI Radeon X1600?Do some imac 1.83 Intel Core Duo come with out it?I'm freek'n stuck!!Any help would be Greatly appreciated!!
Al's suggestion should solve the problem.
However, if you get fed up with hitting the esc key every time you open FCE you could try this permanent cure .......... it's nowhere near as frightening as it sounds and only takes a minute !
For a permanent cure edit the info.plist like this:-
1. Right click on the FCE icon (in Applications NOT the Dock) and select "Show Package Contents".
2. Open the "Contents" folder and double click the "info .plist". It should open automatically in TextEdit - if it doesn't, choose TextEdit manually.
3. Around 15 or so lines down you will see AGP. Delete it and put in PCI.
4. Close the window and when asked if you want to save the changes, say yes.
Maybe you are looking for
-
I would like to know which instrument driver works for the Tektronix TDS 544A
I am trying to use TDS544A with CVI and downloaded the driver for TDS 540 and it didnt seam to work... should it? If not, which one will???
-
Windows Vista disk will not install in bootcamp
I have been trying for several days to install Win Vista home premium (full version). The dvd drive always does the same. It starts to spin up and then I hear it read twice and then it stops and I end up with the light grey screen. I have gone as far
-
how to find and replace data in form fields in acrobat xi, its not allowing to do so while trying, asking for adobe livecycle to get installed. please help.
-
Problems importing tagged text
IDD CS5.5, 7.5.2 what I do prepare IDD tagged text file, using DOS/Windows line ends and ANSII encoding open IDD CS5.5 file with formatted content select all content File > Place InDesign tagged text file, using "show list of problem tags" option wha
-
Unable to create invoices due in 2011
Hello, I am unable to create invoices due in 2011. Hope do I open up the year 2011 for access. Thank You! Andrew