Final cut Express unable to capture

My Final Cut Express wont initialize my deck. A dialog box comes up saying so. one site suggest deleting quicktime receipts in my library folder on my mac, that quicktime needs to be reinstalled, then i should be able to get my canon HV20 video camera to communicate with FCE 4 and start capturing. has anyone heard of resolving my "unable to initialize video deck" issue this way? Any ideas how to get my HV20 and FCP to communicate to eachother?

There is a separate forum for FCE.
Make sure you are using the correct HDV settings in FCE and that the camera is set to output HDV and not downconvert.

Similar Messages

Final Cut suddenly unable to capture from any source

I suddenly started having an inability to capture in Final Cut. I have always used Final Cut Express and a Sony handicam and a firewire port.
2 weeks ago when I went to capture I started getting “dropped frames” error messages. As you know, unchecking that feature in FCE or FCP simply results in video and audio that don’t match up. Anyway I tried that and it didn’t work.
I have used two other firewire cables
I am using OS 10.5.8
in trying to fix this problem, I upgraded to Final Cut Express 4 (from 2.0)
I trashed preferences.
I used disk repair and verify permissions
I booted up and down
then I gave up on the sony handicam and connected my G5 to a JVC editing deck I have, the JVC SR-DVM70.
When I connect my G5 to my JVC deck through the firewire In/Out port, I get the message, “VTR OK” so the connection is there.
When I hit “play” in Final Cut, it does control the deck and makes it play—but I do not see the video in Final Cut; I only see it on the JVC deck monitor.
When I hit “stop” it does not make the JVC deck stop. The only function it seems to control is simply “Play.”
Then when I go to capture, I get the message: "unable to capture because there is no video."
I have tried several different “Easy Setup” settings, including several firewire settings (including basic firewire) and several NTSC settings and a PAL setting.
Weird.
anybody out there a genius with this?

There is a separate forum for FCE.
Make sure you are using the correct HDV settings in FCE and that the camera is set to output HDV and not downconvert.

Final Cut Express won't capture audio with the video anymore, why?

I have used Final Cut Express 4 for over a year now with no problems, but recently I am unable to capture any audio with the video from my camera. I can do it through iMovie no problem. I can't figure out if I changed a setting by accident because everything looks normal to me. Could another program be interfering with this? Quicktime Pro? I have no idea how to fix this.

First of all, we need a bunch of information in order to help. Please provide the specs of the footage and the sequence you are using. Also, are you using DV, HDV, or AVCHD? Do you hear audio when the clip is played in the viewer, or is there no audio at all once the clip is captured/ingested?

Getting the following message on Final Cut Express "audio only capture selected video preview disabled" how can I get the video capture back?

I'm getting the following message on screen when attempting to capture video "audio only capture selected, video preview disabled." How can I get the view preview back?

FCE doesn't allow for audio only capture, it's in a twist somewhere.
Try trashing the FCE preferences.
Al

Final Cut Express HD 3 capturing problem

I have 2 G5's, I installed Leopard and FCEHD3 on the one rig yesterday, but it doesn't see the camera (Canon XHA1) likewise using Tiger 10.5.
When I go to Setup I don't have the full preference menu (only 4 settings in NTSC & PAL) What do I need to add to capture HD footage?

I checked out some other systems and found was using Tiger 10.4 (G5)and had a long list of camera settings in easy setup. My other friend is using a G4 with Leopard and has a list of settings.
Last night I downloaded some upgrades for FCEHD with the Leopard software and still only have 4 NTSC & 4 PAL camera settings? The friend with the Leopard software also installed iLife 08, I did that yeaterday also, same results.
I have also tried playing with the camera settings, same.
Now on the Leopard G5 with iLife 08 it will see the camera (VCR mode) in iMovie only on still camera. When changed to video camera mode it doesn't see the camera.

Real-Time Capture in Final Cut Express

Hi All -
I own a music venue, and we're considering adding video recording services (current we just offer audio). To reduce labor, I'm planning on a fixed mounted camera (brand/model TBD) from one of our lighting trusses (on the ceiling). We'd like to stream the video footage into a PowerMac and/or PowerBook in real time (presumably via a long firewire cable), thus avoiding the use of tapes, etc... So two questions:
1- Can Final Cut Express handle direct capture of video in Real Time? If so, are there any constraints, such as 7200 RPM harddrive, no HD, etc..., that I need to be aware of?
2- We plan to capture audio separately so that we can mix it in 16-track format in our ProTools HD studio. Will FCE work with a time code (SMTPE, etc...), or are there other prefer methods of keeping the sources in synch?
Any other thoughts from concert film masters would be appreciated! We're a small venue (150 person capacity) and will be using this mostly for student recitals and local bands - thus we need to be frugal and minimize the number of people needed to run it.
Thanks!
Raja
Red House Studios
www.redhouselive.com

1. There are limitations to the length of FireWire cable data can be streamed. You might want to check up on this. FCE captures DV in realtime. You'll need a fast drive either in the computer or an external FW drive at least 7200rpm with 8MB cache.
2. No.

Bizarre results importing imovie into final cut express?

I have filmed different interviews which were captured in imovie. I am now trying to import them into final cut express. But when I import one interview called, say, Gavin I get Karen's interview instead. The clip is labelled Gavin but the footsage is from a different interview. No matter who I import I get a completely different project and there is no rhyme nor reason to the footage that opens up.
Basically I get the wrong footage with every clip I open.
Please help before I end up in the loony bin!
Exasperated,
Clare

I bought Final cut express just after capturing all my files in imovie (having heard that it was supposed to be easier to cature and trim in imovie before sending the files to fce - is this what you have heard?). If it weren't for a solid week capturing and trimming 40 hours of film I would recapture in fce!!
I have even replaced the captured media within the scratch folder but still it opens the wrong files.
The files are labelled as the interviewees name. All the books say that you can import imovie projects into fce and then render and save as fce files.
I have tried various methods of importing, opening and even dragging a clip straight from imovie into the browser of fce - which works but opens an original untrimmed version rather than the short trimmed version and again it will be an interview of the wrong person.
I have since been turning the imovie files into .mov files and opening them in fce - this seems to work but hope there is no change to quality.
Would this be the way to go? I would so appreciate an answer!
Thanks

Final Cut Express take miniDV

Does Final Cut Express support miniDV captures? On the website it lists DV but not mini.
Message was edited by: Paul Samuel

miniDV is just the cassette size. The format is DV regardless of the cassette dimensions.

Panasonic HDC-SD100 media card unable to capture on Final Cut Express 4

No problems at all with transfer to i-movie but just purchased final cut express 4 and problems with capturing from the media card. Signal system on camera is 1080/50i. Have tried setting HD and 1080/50i in the easy set up but no joy. Have tried log and transfer and see clips but on transfer message states no data. Can anyone help with the settings please?
Many thanks in advance

Welcome to the forum!
There are many things that could cause this, and almost all have been discussed.
Some things to try:
• In the Log and Transfer window, click the preferences button (the gear in the upper right). Make sure audio is set to *Plain Stereo*
• Also in that preferences window, click the button to *Clear the Cache*
Also, what drive are you using to capture to (internal or external)? How is it formatted, and how much space is left on that drive?

Final Cut Express won't allow me to capture from my vdo camera

I just loaded Final Cut Express HD on my Mac because I wanted to upgrade from IMOVIE. My Powerbook G4 had no problem capturing video with my Sony HDV 1080i video camera. But I can't get Final Cut Express HD to locate my camera at all no matter what "easy setup" setting I choose. But if I turn on IMOVIE, the program can capture from my video camera no problem. I know the firewire cable is hooked to the computer correctly & the camera is on & in the VTR mode. If anyone can help me identify this problem, I'd really appreciate it because I'm trying to begin a new video project & can't if I can't capture video. Thanks for helping.

Fritz from Technical support told me about a glitch in Final Cut Pro & Express HD that happens when you upgrade to Quicktime 7. He told me to go to this article: Link: http://www.info.apple.com/kbnum/n301852
and follow the instructions & it would fix my problem. It didn't & then of course I called tech support back & it was after hours. I still can't capture from my video camera but it works in IMOVIE. I removed Final Cut Express HD from my computer (even all the files in library/users, etc.) and then reinstalled it. It still gives me the same error even though I have my camera plugged in & turned on. It says unable to locate capture device. This is unbelievable. Hopefully I can get some help. Brian

"Unable to open project file" message in final cut express 3.5.1

I have (well had now) a project with 3 video clips and multiple .psd files as stills. When the project contains just the 3 video clips and a couple of transitions I can save the project and quit Final Cut Express and relaunch FCE and when I try to re-open the same project, it opens just fine, without any problems and just the way I expected it to be. After editing the same project for a couple of hours and saving along the way (this has happened twice now and I don't think the length of time of editing matters) and adding multiple still images to the 3 video clips (this part is new in my working with FCE); I save and quit. When I return to open the same project I get the message "Unable to open project file" and click the OK button, which is my only option and I am given a new blank project. So where did my work go???

Thank you for the response, but it hasn't worked yet...
I read the link. I am working off my internal drive.
I re-named the Capture Scratch folder, and any Render folders and then launched FCE. I was presented with a window that reads "To preserve the integrity of the data used by Final Cut Express HD, it is necessary to ensure the existance of the following path(s)" The path in the box below is where my project file and support files are. My 3 options are Quit, Check again and Reset Scratch disk. I choose the Reset Scratch Disk button and it took me to the Scratch Disk window and I Set/Created a new folder and clicked Choose and then OK back at the Scratch Disk window and Continue at the initial window... the Reset Scratch disk button is now labeled Continue. I am given a new Untitled Project work space. I tried to open my project file and once again with the message "Unable to open project file".
Where did I go wrong???

Final Cut Express, Preview not working in Capture

I've just purchased Final Cut Express, and have installed it in my G5 iMac. When I try to download film from my Sony TRV 17, I am unable to do so. The preview screen has a message "Preview Disabled", and I am unable to capture anything. The capture controls seem to control the recorder just fine. Anyone have a simple answer?

I'd tried running the camera into the computer, and only using the internal hard drive, no change.
When the camera is off and I start the program I get a message stating that the camera is not connected, but as soon as I turn the VCR on and hit the retry button, the program starts. Which easy set up option should I use if not FW basic?
Try daisy-chaining the camera to the drive. Do not
use FW basic with that camera. Make sure the camera
is turned on in VCR mode, and reboot. Launch the
application. Does it see the camera at start up? If
not, try it with the LaCie disconnected, and see if
it works directly into the computer.

Final Cut Express Capture Scratch problem

I am unable to play my video clips as for some reason Final Cut Express is giving a message that a number of capture scratch files are missing. It does this for all clips (referring to different capture scratch files). This did not used to happen. I do not know why it now wants the files. I have looked at old backups and the files are not there (correctly I believe). I have reinstalled the software, copied the backed-up documents (that I know used to work) but still the same error.
Can anyone please help me sort this out (I need the files for Uni work on Monday!)
Thanks.

I occasionally have a similar problem. Tom said:
"Is the media for the project available somewhere on your computer?"
I suggest that you find the exact name of the Project file that is trying to find the lost Captured file(s). Then search the Mac for all occurrences of that file name. The missing Captured file(s) should be in a folder with the same name as the Project. For example, if the Project file is called: "my project file", then search for: "my project file". If they exist, that will find them. (It is possible that the actual Captured File(s) in the folder "my project file" might be named "Untitled", but open it anyway (by double-clicking it) and see if it looks like the missing captured file.
To search on the Mac, click anywhere in the desktop, do File > Find. In the resulting dialogue box choose "Search in:" = "Local discs", then type the filename and press ENTER. (Choosing "Local discs" rather than "Home" is important because the Captured Scratch might have been set to be on an external disc.)
Good luck.

I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please?

I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please, by the way the "L" doesn't appear in the bottom left hand corner either? and by the way how can I get rid of that irritating Blue badge saying "AutoFill your contact details" all mine are in "address book" already!

You can't drag a transition into the canvas. If you're dragginmg a transition from the effects tab you drag it between the edit point of two clips in the timeline.
Make sure show edit overlays is turned on in the Canvas view popup.

Final Cut Express: No audio when capturing from camcorder

When capturing video from my "Sony TRV 18" digital camcorder and a Canon ZR500 digital camcorder
into Final Cut Express 4.0.1 via fire wire to my scratch disk - a LaCie external hard drive -
I get the video in my browser but it has no accompanying audio.
When I move a captured clip from the browser to the viewer and time line, the video shows up, but (1) there is no accompanying audio shown in the audio time line, (2) no audio can be heard and (3) the audio meters show no action.
My Easy Setup settings for audio match my camera audio settings.
I've used different firewires between the camera and the scratch disk. Still the same.
This has been a problem for about a month. Everything worked fine before. To make project deadlines, I have worked around this anomaly by capturing clips in IMovie 4 on my older Mac laptop than transferring the media clips to my Final Cut Express scratch disk. That works, but it is time consuming and requires rendering of all the audio.
I use an IMac with OSX 10.6.5 with 266 GHz intel Core i5.
Thank you in advance for any tips that could help.

Hi Sid
I get the video in my browser but it has no accompanying audio.
YES - This is the way FinalCut Express AND Pro works !
If You need the audio - Then You connect a small set of speakers to Your miniDV Camera
(headphone out)
alt. if no phono-out on Camera is to connect a small TV to the Camera analog way
and here You can both see and hear during Capture
(BTW - Connecting a small TV (or if §§§§§ is no problem a reference monitor
§5-10,000 or even more) is a Very good way of keeping Quality control during
editing process. Eg Transitions, audio levels, color fidelity etc. I do and the
ref monitor are well compared to my final DVDs.)
There are NO WAY that You can monitor audio during Capture in any FinalCut versions !
Yours (been there and done that - or as said in Sweden "butted Your head at it") Bengt W

Final cut Express unable to capture

Similar Messages

Maybe you are looking for