Final cut express versus Adobe Premiere Pro 1.5

Hi
Resently I bought a Mac Pro and Final cut express.
In the past I used Premiere Pro 1.5. When my project was finisched i wrote it back to tape as a Microsoft DV avi file. Is it possible to create a Microsoft DV avi file in Final Cut Express ?
I'll aske this because this tape is transported to the studio and imported into Adobe Premiere 6.0.
thanks in advance
Tonnie
Mac Pro Mac OS X (10.4.9)
Mac OS X (10.4.9)

Once it's on tape it's back in DV format and is no longer an AVI or .mov or any other computer format. If the material is put back on tape it can be captured from the camera or deck into Premiere in whatever format that uses.

Similar Messages

Final Cut Studio Vs Adobe Premiere Pro CS5.

What are the best reasons for purchasing Final Cut Studio over Adobe Premiere Pro CS5?
Thanks!

Hi friends i'ven reading your coments and my conclusions are CS5 is faster and has the same features and quality than FCP, i like to ask to Studio X if you know more FCP and you are a pro why? with facts because if i have to buy or say to a friend or client go and use one or another with real facts.
Example FCP has better color calibration, better final quality, more features or so.
Another curious thing is that jhon 1 in 2 said is better AVCHD compatibility or handle these are to consistent points that i can undertand as a normal person.
I can understand a point if you can say me why FCP is better with examples because i know much of hardware but a little of this software, i can give a big point to a software tha can use mi machine at full capacity because if i spend 10K$ in a computer i'd like a blazing fast one, if not is better to spend only 2.5K$ and wait the same amount of time for the same results.
Sorry for my english i'm not from USA so my vocabulary is short.

Final cut express HD versus Adobe premiere pro 1.5

Hi
Resently I bought a Mac Pro and Final cut express.
In the past I used Premiere Pro 1.5. When my project was finisched i wrote it back to tape as a Microsoft DV avi file. Is it possible to create a Microsoft DV avi file in Final Cut Express ?
I'll aske this because this tape is transported to the studio and imported into Adobe Premiere 6.0.
thanks in advance
Tonnie
Mac OS X (10.4.9)

You'd be better off asking this in the inal Cut Express forum - this one if for Final Cut Pro.
Up one floor and down a corridor, you'll find it.

Can't import Final Cut XML file into Premiere Pro CS4 MAC

Hello, I'm traying to import FCP Studio 2 XML file into Adobe Premiere Pro CS4for the purpose of then color correcting the project in Adobe After Effects.
I followed all the rules of exporting XML files from my Final Cut Studio 2 timeline, then closed FCP, opened Adobe Premiere CS4 and when I go to Import option XML file is greyed out. I can't select the XML file...
Could someone tell me what I'm doing wrong? Thank you so much

I'll just say that the high end AE users list I frequent suggests that the more common workflow is to bring AE to FCP for color correction. Isn't that one of FCP's strengths?
Also, to the extent that you want to process an FCP project in AE, look for the best way to bring it directly, not through Premiere. Ask in the AE forum what opinions people have. Mac and PC types use AE, but my impression is that only a small proportion of those users use Premiere.

How can I use Final Cut Express in a Mac Pro

I want to know how could I use my Final Cut Express HD programm (Version 3) in my new Mac Pro.

FCE 3.0 was not designed to work with Intel based Macs when they were introduced years ago so you have no chance with a modern Mac.
You must upgrade to FCE 4 unless you want to move onto Final Cut Pro X which is designed to be used with the latest technology.
Final Cut Studio 3 will also work OK.

Final Cut Express HD and Mac Pro Issue

Howdy all,
I have Final Cut Express HD version 3.0 (LAST year's version not this year's version). I've been using it for some time now on my G4 iMac, but just acquired a 2.66 GHz Mac Pro. I copied over the application and support files to the Mac Pro but when I try to run the program I get an error that I don't have an AGP graphics card. I tried following the advice in this thread: http://discussions.apple.com/thread.jspa?threadID=445909&tstart=60
But none of those suggestions work. Hitting the escape key just stops the program. Changing the plist file does nothing. The program attempts to start and then just stops.
I'd really rather not go out and buy this year's copy if I don't have to as Apple is probably going to be releasing a new version in a couple months anyhow and then I'll upgrade.
Please let me know if there is a work around for this. I would have posted in the other thread so as to not start a duplicate thread, but it had already been archived.
Thanks,
Jon
2.66 GHz MacPro, 30 GB iPod Photo Mac OS X (10.4.8)

if the OP used Migration Assistant or disk cloning
software to make a copy oif his system drive it is
possible to copy the app without using the
installation disks, although these methods of
transferring apps from PowerPC to Intel macs will
undoubtedly cause problems.
This doesn't make sense now that I think about it. If the Application is purely a PowerPC app, then copying to an Intel machine it or re-installing it from scratch should make no difference. The same stuff is all going to be installed anyhow.
To Ian,
It can be copied w/o installing, of that I am sure. You can't just copy the application package though. There's a number of support folders in both the /Library directory and ~/Library directory. Somewhere in there is the licensing info.
Anyhow, I'll try deleting all the plist files you suggest and starting over. If I have to, I will call Apple to see about getting my orignal code. After all, I have registered and they should be able to see each product I have purchased...

Will Final Cut express work with MacBook Pro??

I am new to Mac and got my first Mac, MacBook pro. 2.4GHZ - 2.o Gig Memory.
Will this be enough or is there an hardware requirement that macbook pro does not come with?
iMovie 08 does not have the effects I was using in the old PC. Slow motion, combining many audio tracks, cross fade etc.
Thanks

Final Cut Pro is the same program (to all intents and purposes) as Final Cut Express and requires the same power of computer - no more, no less.
For most people, FCP will not do anything that FCE can't - apart from allowing you to use formats such as DVCPRO etc. that amateurs are unlikely to use. All the filters and transitions are exactly the same except for a couple of insignificant ones.
The only reason for buying FCP is in order to get all the other programs that are bundled with it.
Ian.

Moving Final Cut X files to Premiere Pro

Hi all:
I'm finally making the jump and leaving our dear old FCP for greener and groovier pastures.
Does anyone know if the work files and sequences created in X and FCP 7 can transfer over to Premiere? I know I can make movies and import those - just trying to avoid the pain of recreating the work flow.
Thanks

Here is the info:
http://helpx.adobe.com/en/premiere-pro/using/importing-xml-project-files-final.h tml
MtD

Standard MacBook Pro and Final Cut Express and other great Pro Apps

Hey Guys - tell me if this configuration of a MacBook Pro would be ok and work great for Final Cut Expess, Aperture, Creative Suite, and other Apps without slowness and other problems
2.4GHz Intel Core 2 Duo
250GB Serial ATA Drive @ 5400 rpm
Superdrive 8x
2GB 667Mhz DDR2 SDRAM - 2 x 1GB
Thanks in advance.

Yes. However, if you want to run +more than one+ of those listed apps simultaneously, the best thing you can do is add more RAM. Go to the max - 4 GB (2 x 2 GB). Note that Apple overcharges for RAM (and they don't make RAM, they just buy it from Samsung, Micron, and others, mark it way way up, and resell it). So, buy Crucial (the consumer division of Micron, in fact) or Kingston RAM. 2 x 2 GB sticks can be purchased for a little over $100 (compared to Apple's $200).
Hope this helps...

Final Cut Express Vs. Final Cut Pro Vs. Adobe Premiere

Hey all,
I just bought my first Apple computer and I'm loving it. I have worked with Final Cut Pro in the past and I really enjoy working with it. However, $1000 is a bit steep. I would like to ask what your opinions are on maybe getting Final Cut Express or Adobe Premiere Pro.
I have the trial of Adobe Premiere right now, but whenever I place a clip into the timeline, it needs to be rendered. This was never an issue with Final Cut on the computers at my school. I was wondering if you knew if Final Cut Express would have better rendering times and wouldnt need as much rendering. Also, it may be the graphics card in my computer. If you think this is the problem, can you provide me with a solid video/graphics card that I should look into?
Thanks all,
Kevin

I own all three programs actually - here's my advice.
Stay the heck away from Adobe Premiere. It is no where nearly as Mac friendly and for the price, just isn't worth it. I purchased it for the Blu-ray authoring capabilities of Encore, so that's all I use it for. The plus to Premiere is that it can edit some native formats that Final Cut Pro cannot. For example, native AVCHD as well as MPEG-2 in program streams. That being said, Encore is the best option for Blu-ray authoring at a reasonable cost that gives you the ability to modify menus, etc.
Final Cut Express is a great application - my only reason for having final cut pro was my need to edit footage at 23.98, 29.97, and 59.94 fps. FCE only handles 29.97 (and 25 fps). Final Cut Pro also gives you the ability to edit more footage natively. FCE only supports DV, HDV, and AVCHD, with the latter two being transcoded into Apple Intermediate Codec for editing. FCP supports a myriad of formats and allows native editing in HDV - although it still transcodes AVCHD. FCP also gives you access to the ProRes set of codecs which are significant improvements on Apple Intermediate Codec that offer high quality in transcoding and editing.
So the real question is, what are you going to be doing?

Importing Final Cut Express projects

Hi,
I cannot see how to importing my older Final Cut Express projects into Premiere Pro CS5. I know this can be done with Final Cut Pro via the XML format, but it seems that FCE does not export to XML. Does anybody know of alternative ways of exchanging data? Maybe, a file converter of any kind?
Best regards,
Paolo

Yes, I have a couple of them, but they have their lives :-)
I guess I can have their help, as soon as they can. In any case, being independant with this kind of things would be great.
However, I guess that this conversion is to be done once, since I don't plan to downgrade to FCE again (unless Adobe stops developing Premiere for Mac again, or I end up with no money to buy the upgrades...)
Paolo

Does Final Cut Studio deliver better quality than Final Cut Express

If my export target is Apple-TV 720p, is there any difference between the quality delivered in Final Cut Express versus the new Final Cut Studio? E.g. is it the same because Quicktime is doing it? I read something on the FCS home page that it "adapted the quality to the video content"? So would FSC somehow be better at utilizing the maximum 5Mbps data stream compared to FCE? Thanks.
-Troels

+is there any difference between the quality delivered in Final Cut Express versus the new Final Cut Studio?+
Not really, not per se, for this purpose. There are many factors at play, very important among them is the nature of your source media - if it is shot on a high quality camera and captured in ProRes or one of the other higher quality codecs supported by FCS then maybe you would see a difference. What are you using?

Adobe Premiere Pro CS4 -- Apple Final Cut Pro 6?

We allready have a function inside Adobe Premiere Pro CS4 that let us to import Apple Final Cut Pro projects... And it could be very helpful when we need to work with Adobe After Effects...
I was working with a film project that needed to be done on AE, so I opened it Premiere Pro and looks great... I've done all I needed to do, and now I wanna get back to FCP to finish my work... But I can't find any function that let me do that...
Is there any way to do it?...
I've tried exporting my Premiere Pro project as XML, and then imported it back in FCP, but my links were brocken... All files were offline, and when I tried to reconnect them, it were no way to be done...
Help... Please...

Export an edl from PP, that should work.
G.

Final Cut Pro 7 keyboard shortcuts for Adobe Premiere Pro CS5 for Windows

Attached is the file that contains the Final Cut Pro 7 keyboard shortcut set for Adobe Premiere Pro CS5 for Windows.
This file was mistakenly left out of the Premiere Pro CS5 installer, so people who tried to switch to this keyboard shortcut set were unable to do so.
Unzip the file and then install the .kys file by copying it here:
C:\Program Files\Adobe\Adobe Premiere Pro CS5\Keyboard Shortcuts\en_US
(where C:\ may be replaced by the a different volume if you installed somewhere other than the C drive, and en_US may be replaced by another locale ID)
This file was included in the Premiere Pro CS5.5 installer, so manually installing this file is only necessary for Premiere Pro CS5.
For information about keyboard shortcuts, including how to customize them, see this page:
"Keyboard shortcuts"

By the way, Mac users don't need to update this file, it's for Windows users only.

I am a final cut pro user and i recently started using adobe premiere pro. for anyone firmiliar with fcp, there are interesting ways of doing introductions on it and im wondering if anyone could tell me if premiere pro has preset introductions i can use

i am a final cut pro user and i recently started using adobe premiere pro. for anyone firmiliar with fcp, there are interesting ways of doing introductions on it and im wondering if anyone could tell me if premiere pro has preset introductions i can use.

Singenu wrote:
I tought about looking in Monitor Activity to see what happens...
Well, when I start working (should I say try to work with FCPX, activity monitor in the %processor column for FCPX jumps rapidly over 100% and reaches more than 200% ??? What the **** is that ?
200% or more is not strange. Remember that your mac has 4 cores (you say it's 3 months old, so I assume it is a new model), so 200% amounts to using 2 of these 4 cores to the max.
Regarding the question of creating a new admin user: while it sits in the same system, it may help if the problem is caused by some user-specific preferences or settings. Not likely in your case, since you seem to have reinstalled from scratch, but still it is worth a try. It takes 5 minutes and may help pinpoint the problem.

Final cut express versus Adobe Premiere Pro 1.5

Similar Messages

Maybe you are looking for