Final Cut Express Will Not Render.

Hello, while working on a very important project for school, Final Cut Express stopped rendering anything, completely. No matter what project, what circumstance, what method I try, It will not render. I need to get this project done NOW and have no where else to turn to.

Do the Render Items have check marks against them in the Sequence>Render All menu?
Is Capitals Lock switched on?
Al

Similar Messages

  • Capturing Flip Video to Final Cut Express Will not launch Flip Video

    I have done this many times before. I am using Final Cut Express and I am plugging my Flip Video camera into my MacBook Pro and the Flip Video software does not launch. It does not seem to be the
    Flip Video software that is the problem. I have upgraded the Flip Video software. The prompt I get says Flip Video quit unexpectely. I have no idea what is going on. I get a huge log of computer terms which I do not understand. Any ideas? Wish I knew more.
    Here is a screen shot of what I am getting after I attempt to open Flip Video Share Capture etc./Users/Tim/Desktop/Screen shot 2010-08-04 at 11.36.11 PM.png
    Message was edited by: dubdroid 1

    The problem is with your Flip Video software. It is launching but then crashing - that's what the message means:
    The prompt I get says Flip Video quit unexpectely.
    "Quit Unexpectedly" is a nice way to say "Crashed".
    You could try trash the Flip Software.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards.)
    *What's the plist file?*
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
    If that doesn't help you need to contact the makers of the Flip software.
    Regards
    TD

  • Final Cut Express will not start up - faulty CD?

    I am trying to reinstall Final Cut Express 4 from the CD. I am getting the error message pasted below when the program crashes on start-up. Could this be down to a faulty cd?
    Process: Final Cut Express [355]
    Path: /Applications/Final Cut Express.app/Contents/MacOS/Final Cut Express
    Identifier: com.apple.FinalCutExpress
    Version: ??? (???)
    Build Info: FCPApp-711051055~9
    Code Type: X86 (Native)
    Parent Process: launchd [95]
    Date/Time: 2010-05-26 23:22:14.477 +0100
    OS Version: Mac OS X 10.6.3 (10D573)
    Report Version: 6
    Interval Since Last Report: 171845 sec
    Crashes Since Last Report: 6
    Per-App Crashes Since Last Report: 6
    Anonymous UUID: 3F7E5A74-B1D5-468B-97E1-C7584227BD74
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread: 0
    Dyld Error Message:
    Library not loaded: /Library/Frameworks/ProFX.framework/Versions/A/ProFX
    Referenced from: /Applications/Final Cut Express.app/Contents/MacOS/Final Cut Express
    Reason: image not found
    Model: iMac11,1, BootROM IM111.0034.B02, 4 processors, Intel Core i7, 2.8 GHz, 8 GB, SMC 1.54f36
    Graphics: ATI Radeon HD 4850, ATI Radeon HD 4850, PCIe, 512 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x8F), Atheros 9280: 2.1.9.8
    Bluetooth: Version 2.3.1f4, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST31000528ASQ, 931.51 GB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd110000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
    USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
    USB Device: Vendor-Specific Device, 0x0fd9, 0x0022, 0xfa130000
    USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000
    USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa120000
    FireWire Device: OEM ATA Device 00, G-TECH, Up to 800 Mb/sec

    Hi guys. I contacted apple support and have managed to solve this problem. For anyone else experiencing this issue the solution seems to be to recreate the proFX.framework folder in the library folder. This is an OS installation problem rather than a FCE installation problem, as you so rightly identified. The apple tech sent me a zipped framework folder which has now solved the problem. Thanks for all your help.

  • Final Cut Express will not open!

    I have Final Cut Express HD on a MacBook with OSX 10.4.11. It used to work fine but suddenly the application will begin to launch and then just close while still at the loading screen. I uninstalled and reinstalled hoping this would help and still it does the same thing. I don't know what else to do does anyone have any suggestions? Also, sometimes it gives me the error message: Unable to locate the following devices: Apple firewire NTSC (720x480). This never used to happen and I assume it is part of the problem.

    Has it started happening AFTER you updated to OSX 10.4.11 (or installed some other program or update) ? What version of QuickTime are you using ?
    Try trashing the preferences exactly like this :-
    http://www.fcpbook.com/Misc1.html
    Before reinstalling did you completely uninstall FCE or just trash the FCE application icon ? This is how to uninstall correctly :-
    http://docs.info.apple.com/article.html?artnum=301182
    You can ignore the LiveType and Soundtrack items.
    Ian.

  • My final cut pro will not update on my iMac, it will update on my Macbook.

    my final cut pro will not update on my iMac, it will update on my Macbook. I have OS X Yosemite on both systems, my macbook has final cut pro x version 10.1.4 and my iMac shows no updates available and is on version  10.1.1. I have tried looking in iTunes for the same update that is installed on my macbook under the same iTunes account, but it doesn't show any updates. I tried deleting from my iMac and it won't delete so I can reinstall it. any suggestions?

    You need to be logged into the Mac App Store with the same Apple ID in order to see your updates. You speak about iTunes: maybe you meant that just as an expression to refer to your Apple ID, but just in case you didn't: you do NOT use iTunes to download mac software. You use the App Store application, available under the Apple menu.

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

  • Final Cut Express HD ( Not 3.5)

    I have an iMac running a new intel core duo processor. I have an older version of Final Cut Express HD. Will this software run on my system?
    If not what is Apple's policy for returning unopened software?

    I don't know what Apple's policy is but in the last week several people (who have complained) have returned unopened software and received a refund minus a small administrative cost.
    So get on to Apple or your supplier immediately and COMPLAIN!
    Ian.

  • Final Cut Express, Preview not working in Capture

    I've just purchased Final Cut Express, and have installed it in my G5 iMac. When I try to download film from my Sony TRV 17, I am unable to do so. The preview screen has a message "Preview Disabled", and I am unable to capture anything. The capture controls seem to control the recorder just fine. Anyone have a simple answer?

    I'd tried running the camera into the computer, and only using the internal hard drive, no change.
    When the camera is off and I start the program I get a message stating that the camera is not connected, but as soon as I turn the VCR on and hit the retry button, the program starts. Which easy set up option should I use if not FW basic?
    Try daisy-chaining the camera to the drive. Do not
    use FW basic with that camera. Make sure the camera
    is turned on in VCR mode, and reboot. Launch the
    application. Does it see the camera at start up? If
    not, try it with the LaCie disconnected, and see if
    it works directly into the computer.

  • HT4589 After Yosemite Final cut pro will not run and says there are no updates available.

    OS X Yosemite caused Final Cut Pro to not run until upgraded.  Says there are no updates available and will not let me install it - says I already have it.
    Boxed in and can't move. Now FCP v 10.1
    OSX v 10.10
    Jim

    FCP (10.1.3) works just fine on 10.10.. try to trash FCP then re install.

  • Final Cut Express Codec not found

    I had to re-install Snow Leopard because Lion caused issues on my MAC PRO with previously installed Power PC friendly applications. So I had to reinstall Final Cut Express HD 3.0. I ran an update check and everything was up to date. However, when I tried to open using HDV Apple Intermediate Codec1080i60 an error popped up that said
    "Codec not found. You may be using a compression type without the corresponding hardware card."
    Are there any solutions to this?

    What exactly is your problem?
    There are only 2 reasons you need AIC.
    One is to convert  HDV which is shot on Mini-DV TAPE cameras and the other is to convert AVCHD.
    If you only have FCE 3 you cannot use AVCHD footage as you need FCE 4 and an Intel Mac.
    If you are using an HDV TAPE camera you do not use Log and Transfer, you use Capture.
    Also, what exactly did you mean by this?
    " . . . . when I tried to open using HDV Apple Intermediate Codec1080i60".
    The normal way to open FCE is to double-click the icon in the Applications folder.
    Message was edited by: Ian R. Brown

  • P2 Files in FINAL CUT 5 will NOT work

    Hello,
    I have some P2 files in my hard drive that will not open in my version of Final Cut Pro (version 5.1.4). How can I bring the P2 files in final cut to use both audio and video?
    Thanks in advance!

    If the P2 file structure is not intact, the only option you have is RAYLIGHT.
    www.dvfilm.com
    Next time, keep EVERYTHING on the card, the CONTENTS and LASTCLIP.txt file.
    Shane

  • Final Cut Pro will not open

    I broke it. After I did, I tried to uninstall it, but did not make a difference.
    First I tried Delete User Preferences and could not find Final Cut Pro User Data under the Preferences folder. Now even com.apple.finalcutpro.plist does not exist. This is most likely because the application will not open and get to the point where it would care new User Preferences. After I uninstalled the program the registration page popped up and I re-registered so com.apple.RedFinalCutPro.plist is there, but nothing else.
    So pretty much I open the program. The white box that says final cut pro and has ‘loading’ with words flashing past under it pops up. Then the words stop flashing and the white box disappears. At the same time Final Cut Pro disappears on the loading dock.
    That is all I know. It is really really broken.
    PowerBook G4   Mac OS X (10.3.9)  

    Not sure if this will even remotely help, but I had the same problem.
    I reset my scratch disks, waveform cache, thumbnail cache, and auto save vaults, and it fixed the problem. One of my hard drives came unplugged while I was working. It threw my scratch disks all outta wack. FCP would open then close, like you said. So I shut off one of my hard drives so it would open the box that tells you your scratch disk is missing. Thats when I reset them.
    I'm curious as to how you "broke it" to begin with. Maybe we can better help you if we know.
    Hope you get your problem taken care.

  • My final cut pro will not open

    i click on the application and the loading screen comes up and then it disapears and will not open the interface of final cut and all i see is the desktop any suggestions

    First thing to try when anything bad occurs is to trash the preferences using this free app
    http://www.digitalrebellion.com/prefman/

  • My final cut pro will not launch, I keep getting Final Cut Pro quit unexpectedly

    I've done everything to deleting preferences and plug ins to re installing it, someone please help me with this problem

    No luck at all, ive done everything thinkable and this is what i get in my report
    Process:         Final Cut Pro [284]
    Path:            /Users/ConGar/Desktop/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCutPro
    Version:         ??? (???)
    Build Info:      FCPApp-906181654~22
    Code Type:       X86 (Native)
    Parent Process:  launchd [78]
    Interval Since Last Report:          53967 sec
    Crashes Since Last Report:           20
    Per-App Interval Since Last Report:  0 sec
    Per-App Crashes Since Last Report:   20
    Date/Time:       2011-06-22 12:40:21.298 -0400
    OS Version:      Mac OS X 10.5.8 (9L31a)
    Report Version:  6
    Anonymous UUID:  FB70EBC0-C946-4694-AE72-9D861D7E5486
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /Library/Application Support/ProApps/SharedA/Frameworks/ProFX.framework/Versions/A/ProFX
      Referenced from: /Users/ConGar/Desktop/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
      Reason: image not found

  • I have just downloaded Yosemite but Final Cut Pro will not work can you help

    Hi, I have, two days ago, updated my Mac with OS Yosemite only to find the programme Final Cut Pro no longer works.  Can you explain please
    imac 27" Mid 20l1
    Processor 3.1GHZ intel core i5
    memory 4GB 1333 MHZ DDR3
    Please do not get too technical. Thanks

    Glad you got it going.
    I might suggest reading up on it starting here
    http://www.fcpxbook.com/updates/101/
    as the new version is very different from what you're used to.

Maybe you are looking for

  • Import of photos is not working. Moreover 'photos' app is not getting closed, it says 'closing all libraries'. Even it is stopping shutdown/restart of my mac.

    Import of photos is not working. Moreover 'photos' app is not getting closed, it says 'closing all libraries'. Even it is stopping shutdown/restart of my mac.

  • Dual boot (Windows Vista + Archlinux)

    First hello people, this is my first post.I need some guidance here. I installed Archlinux in my laptop ( DELL XPS M1330) from a USB stick memory everything went smooth until i got to the grub part. I did it as the wiki mention I installed the grub a

  • Create List of Tables/Columns/Data Types

    I am new to Oracle (from SQL Server) and I am looking for a query that will create a list of tables, columns, data types, etc. (data dictionary) in an Oracle database -- one that I can import into, say, MS Access or use Crystal reports and create a r

  • Lobby Administraton

    Hi, I am confused on how this work. My concern is regarding lobby administratoion,  when the lobby administrator generate a guest login ,  he/she there is no option to send or print the Guest login. Is there any additional appliance or application I

  • Rescursive Include

    Hi all, I am using Tomcat 3.1. I have a main JSP page that uses the include tag to include a second jsp page. In the main jsp page I have a form whose action is to post to the main page. However, because of the include tag I keep getting the error: o