Final cut express with Lion

I had to replace my Hard Drive on my iMac and had Lion installed then I reinstalled FCE and it  won't work at all. Is it because FCE won't work as a new install with Lion? Do I need to get the new version of Final Cut?

The FCE installer needs Rosetta, which is not part of Lion.  Also, FCE itself is not supported on Lion (FCE was discontinued last June when FinalCutPro-X was released.)
I'd suggest moving on tto Final Cut Pro X.  Yes, it's a whole new learning curve, but there are good resources available including Izzy Video's free Final Cut Pro X tutorial course.

Similar Messages

  • How works final cut studio with lion?

    how works final cut studio with lion?

    The thing to take from FCPX is that it isn't an update/upgrade from 7. It's an entirely new editor. As a professional video editor myself for 5 years, I felt just as hesitant as you when I first saw what Apple had done. However, I committed myself to biting the bullet for a little while to get comfortable with the new workflow, and I can vouch for Apple's new move toward this type of setup. It has improved my workflow enough to where I can confidently say I deliver projects, on average, in half the time, with no sacrifice to quality.
    Give it another chance, if you can afford it. With a bit of training, and time into using it, you'll see it's a superior editor to FCP 7

  • Can you deploy Final Cut Express with ARD?

    Hi Folks,
    I have recently purchased ARD to help administer a suit of iMAC and 6 MAC Book Pros. I have an issue with Final Cut Express 4, in that it requires the licence information on application start up. I originally created an image with all of the software pre-installed and everything works apart from the licencing of FCE. I was hoping that ARD would solve the issue.
    I have tried to copy the existing FCE ID file from the ProApps folder from one computer to another – however it must hash the licence with system ID or something else as it still requires the licence info at start up? As suggested in another thread.
    https://discussions.apple.com/message/12514255#12514255
    So is there any way to install FCE 4 without the need to manually enter the product key?
    The Mac are running mountain lion and are all intel based.
    Any help or info would be very much appreciated.

    Yes, I've purchased it for my late 2010 MBA 13.  Runs pretty good.  Since it does what it does, it does run the CPU, fan and temp up a bit, but still ran perfectly fine.
    Cheers!

  • Using Final Cut Express With Sony DCR-TRV480

    Hello all,
    This is a well known newbie problem and i have came across it before with a different camera and do not remember a fix. Whenever i launch Final Cut Express i get the message "Unable to locate the following devices. Apple FireWire NTSC (720x480)". The camera is clearly connected via fire-wire and turned on. Any insight or ideas will be greatly appreciated.
    Thanks!
    ~Dan

    Do you have any other firewire devices connected to your Mac at the same time your camcorder is connected? If so, try it with only the camcorder connected.
    Is your camcorder turned on in VCR (aka VTR) mode?
    What versions of FCE and QuickTime are on your Mac?
    Your profile says you are running OS X 10.6.3 - is that correct?

  • Final Cut Express with Universal Control Surface?

    I would like to buy Final Cut Express. I want to use a universal control surface such as the Tascam FW1082 with my editing. I know the FC Pro has control surface compatibility, but does the new FC Express?

    Bummer. But, thank you for answering my question.

  • Final Cut Express with iMac G4

    I have been using an iMac G4 for several years. It has worked out extremely well for me. I use it for internet browsing and Microsoft Office applications. Now I'm considering getting Final Cut Express.
    Will the G4 iMac be able to handle it?

    My G4 733 worked great with FCE 2, and would probably run 3.5 just fine for regular DV, not HDV. Right now my G4 Quicksilver 1 GHz is running FCE 3.5 perfectly well, along with LiveType and SoundTrack. In fact I recently went to the local Apple store where they have Final Cut on their newest and latest Macs, and I deliberately made some complex edits in Final Cut on one of their Macs to see how much faster it would render them. I was surprised that it was not much faster than my Quicksilver G4.
    Check the hardware requirements for whatever version of FCE you want to run.
    Tom

  • Export to Final Cut Express with iMovie 08 doesn't work?

    When i export from iMovie 08 to final cut express using the XML function it exports and when I import into FCE4 it is only one big video with everything connected. I want it to be like separated so I can keep editing in FCE4.
    Could someone please help?
    Thanks.

    Those gurus are here:
    https://discussions.apple.com/community/professional_applications/final_cut_expr ess_hd

  • Installing final cut express with  a disc drive

    I have 2 copies of final cut express 4, however my laptop was stolen. I know have a new laptop but it is a mac book pro without a disc drive. How do install my copy of final cut express? I don't want to (and can't afford) to buy it again when I already own 2 copies and all the used software coupons.
    Can I download it? where and how?

    Get an external DVD drive. Apple sells one:
    http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive?fnode=5f
    You can probably find something cheaper, if you look around.
    MtD

  • I erg my final cut express with apple, my computer is askingfor final cut ssn number after a year, i don't have the box. how do I get it from apple me

    How do i get my ssn number from apple for my final cut express, I installed it almost a year ago.  now its asking for the ssn and I don't have the box.
    Koby

    Read this: http://support.apple.com/kb/HT1861

  • Final Cut Express with Youtube

    Hi all,
    I've been having this really annoying problem ever since I started using final cut to export movie files for Youtube and I can't find anything online to help me out, so hopefully one of you knows the answer!
    Basically every time I export a video from FCE and upload it to Youtube, the video only fills a small part of the Youtube screen, rather than taking up the full video box, which looks pretty awful - Check out the example below:
    http://www.youtube.com/watch?v=_G7n78FqrPs
    Has anyone else had this problem? Or does anyone know the optimum export settings for Youtube so the video takes up the full screen?
    Any help or advice would be greatly appreciated.
    Many thanks,
    Ben

    Yes, I know the dimensions of the source video do not match the optimum Youtube dimensions, but this video fits the full screen before I put it into FCE so I must be doing something wrong within FCE which is messing with the video. Here's the properties for the video and the sequence (Last time I right clicked on the file outside of FCE; the properties below are what I got when I right clicked on the file and sequence within the browser)
    Video:
    Vid rate: 30fps
    Frame size: 510x284
    Compressor: H.264
    Pixel aspect: Square
    Field dominance: None
    Sequence:
    Vid rate: 25fps
    Frame size: 720x576
    Compressor: DV-PAL
    Pixel aspect: PAL-CCIR 601
    Field dominance: Lower (even)
    Hope you can see something wrong in all that?!
    Cheers,
    Ben

  • Loging and transfering 60fps footage in to Final Cut Express with out it changing it to 29.97fps?

    When I "Log and Transfer" my footage to Final Cut and the footage was filmed at 60 frames per second it always changes it to 29.97 frames per second. I need the footage to be 60 fps so it can be in slow motion. But if I start using the clips else where like After Effects CS5 it has the frame rate of 29.97 as I said before. Then my footage is kind a useless regarding the slow motion part.
    Thanks in advance.
    Jakob!

    I have been trying for three days to the same thing.
    I did get the video content off my camera via imovie 08 but the quality is very poor.
    Haven't worked out how to improve the quality yet, I also tried importing the video
    via ADVC 110 analog conversion device but that doesn't improve the quality.
    I do have Final Cut Pro & MPEG-2 Codec and have been searching for the video in the camera's
    hard drive but can not find it.
    Can you tell me where Sony told you to find the video files so that I can try & import it to Final Cut Pro.
    Thanks
    KGovey

  • Capture HD video in Final Cut Express with a Sony HDR-FX7

    When try to capture a video from my new Sony HDR-FX7 using the HD Format Apple Intermediate Codec 1080i60 the preview screen never shows the video being captured. In fact the video is never captured. Any suggestions to how set the 'Easy Setup'? When I try to capture with NTSC format the software keeps looking for a timecode that it will never find thus stops within a minute of starting. I would love to capture some video from my new Sony HDR-FX7 but not having much luck tonight. Have any helpful hints?

    First, trash your preferences. Setting different incorrect settings and opening the capture window is a good way to corrupt the prefs files. HDV AIV 1080i60 is the only one to use if the camera is correctly set to output HDV.
    Please give your full system specifications, what computer, what drives, how everything's connected, what settings are on the media (you really did shoot HDV?), and finally what version of the software, of the OS, and of QuickTime are you using?

  • I want to use Final Cut Pro with Lion?

    I have FCP 6.0.6 and Lion on MacBook Pro. Can't open FCP.

    What happens when you try to open it?
    Use Disk Utility to repair your system disk permissions.
    Download (free) Preference Manager from Digital Rebellion -
    http://www.digitalrebellion.com/prefman/
    and trash your FCP preferences.
    MtD

  • Final cut express HD Lion

    Bonjour,
    J'ai installé Lion et depuis je ne peux plus importer des fichiers dans les chutiers!!!
    FCE HD se ferme.
    Que faire?
    Merci pour votre aide.

    Please excuse me for replying in English, my french is unusable.
    This thread may answer your questions, particularly the first and third post.
    In short: FCE versions 3.5 and 4.0 can work under Lion, provided they were installed on Snow Leopard or previous, and then migrated, or the system upgraded.
    Neither version can be installed on Lion.
    Verision 1.0 through 3.0 cannot and will never run on Lion.
    Bernd

  • HDV KGCore crash with Final Cut express 4 NEED HELP

    I recently purchased a cannon hv30 hdv camera. This is my first time using High Def footage and I am now working on my first project with it. I have used Final cut express with a hard drive camera for over a year now and have made many projects with little problems. After importing my footage in the 1080i60 easy setup setting (around 63 minutes of footage) I began to add it to the sequence. after adding the first part I added the next imported section of hdv footage. The program then froze for a few seconds and crashed. It did this everytime I added the same clip into the sequence. sometimes the error said that kcgore plugin could be related. I called an apple rep and after getting rid of all 3rd party programs and reinstalling TWICE it still crashes after I recaptured the footage while I am either editing the footage or jsut playing it back. NEED HELP

    Thanks I tried it again and it seems to be working but I crashed like once or twice when viewing the footage. But after starting it up again it is working fine it is jsut that the footage has these white flashes in it when playing back sometimes. I am not sure if it is going to crash again or not hopefully it is fixed. I was just using the hdv setting for 1080i60. Im not sure if it was pal or nstc I just used the basic hdv 1080i60 setting. also do you think I should upgrade my ram and memory? Would that help moving it up from a 1 gig to 2 or 4 when working wwith hd footage now?
    thanks again
    Message was edited by: Drewbie

Maybe you are looking for

  • Recording audio into logic?

    hello,how can you record audio straight into logic express 7,i have an audio interface,just dont know how to control logic to do this.i know how to record it onto my hard drive,but just thought you might be able to record it into logic ,like you woul

  • Activity

    Hi   Is there any pdf document on activity. How to use it. Thanks

  • HD Rentals in iTunes please

    I think I speak for a lot of people who use Macs (in my case, a Mini) as a home theater device, when I ask Apple to *PLEASE allow HD rentals via iTunes.* I realize the HD sales are limited to the AppleTV to drive sales of the device, but for my purpo

  • DB Storage parameter in DSO

    FOR DSO in BI 7.0 I wish to declare DB Storage parameter (Active Records) data type            : DODS DB Storage parameter (Active Records): size category     : 1 DB Storage parameter (Activation Queue): data type        : DODS DB Storage parameter (

  • BufferedImage Combining images

    I am working with the BufferedImage class. Basically I have two images that I want to combine together BEFORE I paint them to the screen. Can someone please show me how to do this. I have not been able to figure this out, although I think it will be