Final cut express wont log and transfer

My final cut express application is great, but when i go to upload a video, it looks like its gonna upload but then comes up with the red octogon with a ! in the middle and says no content, can anyone help
ASAP
tedwaffles

From what device are you attempting to Log & Transfer footage from?
Where are you saving your transferred footage to?
Remember that forum users cannot see your machine, so specific details are important for specific answers.

Similar Messages

Mavericks and Final Cut Pro 7 - Log and Transfer crashes

Hi all. I (perhaps unintelligently) upgraded to OSX Mavericks on my Mac Pro while working on a project in Final Cut Pro 7. What is good news is that FCP 7 still works for the most part. The bad news is that Log and Transfer crashes.
I have a Panasonic P2 camera and I dump video via FireWire 800. When I first click on the Log and Transfer button, nothing happens. When I click on it again, the Log and Transfer window opens, but then FCP 7 crashes.
Is there any way to get video from my P2 card into the project without Log and Transfer?
Also, would any of these options work?
Trash preferences (working to figure out how to do that on Mavericks)
Worst case, re-format and re-install Lion (Don't have much time to do that)
Please let me know if you have a work around or a fix for this. I need to have this solved TODAY.
I appreciate your help in advance.

I am having the same issue on my iMac that was udated to Mavericks a while back and apparently I haven't tried to log and transfer anything since.
The error comes up everytime I have a my Sandisk High Speed Card in my lexar Fire Wire 800 card reader. The Log and Transfer screen pops up and it starts adding the clips and instead of populating the screen, it crashes. Mine also says FCP quit while using the canonIHL plug in, here's a screen shot of the indication.
I agree, this needs to be resolved ASAP. I'm dead in the water. The only thing I can do is transfer the raw files into a folder somewhere, then import the clips, but then to have them as ProRes files I guess I would have to use compressor before hand. I've done it before, but it never runs as smoothly without it being natively imported.

Final Cut Express keeps stopping and saying "Too many files open"

Final Cut Express keeps stopping and saying "Too many files open". I don't see how this is the case as I only have the one project open...

Try here:
http://www.fcpbook.com/Misc1.html
Al

I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

I am using a macpro 12 core computer
I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

You can have them both on the same computer as I and many others have done for years.
Just go ahead and install FCS 3 normally.
There will be absolutely no problems.

Final Cut Express wont make make a self contained movie

Until recently I have always been able to export my movies from final cut express HD without any problems. They save as final cut express movie files. Now when I come to export a movie, I click on " make self contained movie" and what I get is a quicktime movie that is split into 3 parts, one named whatever I had told it to save as and the other 2 with the same name but -av1 or -av2 after it. If either of these is deleted the original wont play but they wont open on their own. There is sufficient hard drive space and they are all saved in the same folder. There appears to be a 2GB maximum file size as the first movie is 2 GB the second is 2 GB and the third is whatever is left over. Anything smaller than 4 GB just saves as a 2GB plus whatever is lreft over! They will play if original video clips are deleted so they are independent but wont play if one of the 3 is missing. Please help this is driving me scatty
Powermac G4/466 (upgraded to dual 1.4GHz), Macbook pro Mac OS X (10.4.6)

Is the drive you aresaving to formatted to Mac OS Extended?
Sounds like it could be Mac Standard.
Also check in Prefernces that the file size export limit is not set to 2 gig.
Al

Why final cut express wont read my avi file?

Hi all.
I am currently expreience some problem. Few days ago, i was shooting a video project with my D3s. My D3s shoots in AVI format. yet i dont know why the final cut express and the quick time only able to play and edit the avi file with sound? and wont be able to edit or play the video without the sound. [my d3s have an option which can let me recored the video without sound]

Hi
There is a bit of confusing about this.
• .avi - is a container - not a codec and can contain old .avi with codecs as Indeo 5 - and this needs to be converted
to be used in any iMovie or FinalCut (as I understands it)
• I think Flip4Mac is the program to buy and use.
Howto find out what Codec - If Your .avi movie opens in QuickTime Player - then open Movie inspector and read it.
Yours Bengt W

I just bought final cut express 4 Academic and it fails downloading!!!

I just bought final cut express 4 at my Sister's university. They have a mac store there and the listed price for FCE 4 was $70, so i bought it. After opening it the download failed. What do I do?! Please help!

Hello and welcome to the forum.
What download? Do you mean the installation failed? You need to contact Apple with installation issues. Before doing that, it might be worthwhile to completely uninstall FCE, use Disk Utility to repair your permissions, then reboot. Here's a free utility to help with the uninstall. (http://www.digitalrebellion.com/fcs_remover.htm)
You need to be doing the installation and first run of the software from an Admin account on your Mac.

Final Cut Express issues: Video and no audio

Ok.. sorry about before. I posted in someone elses message, for that I'm sorry.
My name is Justin Smith. I'm a freelance videographer out in Kansas. I have a brand new Macbook Pro. I'm shooting with a Dvx-100. I took my camera and tried to import video into Final Cut Express. When the short video clip was finished capturing, I tried putting it to the timeline, but only the video was added. So I have video, no audio and a bunch of questions. How do I get my orginal audio from the tape onto the timeline? Also, I have a question about importing audio from say Itunes. I can import the song fine, But when I lay the track down on the timeline, I'm getting a continuous beep noise. I read the FAQ and it told me I have to convert the track to AIFF? How do I do this?

As for importing audio from iTunes, yes, you must convert it to AIFF first. iTunes can do this unless you purchased the songs from the iTunes Music Store. If you did, they are protected AAC files and won't convert. There are ways to do it but since it most likely violates the copyright, no one on this forum can legally tell you how to do it.
If they are not protected, then go to iTunes preferences, select the Advanced icon at the top and click the Importing tab. Select AIFF encoder from the "Import Using" popup menu and make sure the settings are 48khz. Then select the song from the library and choose (from the menu bar) Advanced->Convert Selection To AIFF. A new music file in AIFF format will appear in your library.
Another way is to use Quicktime Pro (the paid version of Quicktime). Open the music file in Quicktime, choose Export and select AIFF, 48Khz, 16bit for the format. Again, this won't work if its an iTunes protected file.

Trouble making the text in scrolling credits (made on Final Cut Express) export clear and not fuzzy

I am having difficulty making the text in the scrolling credits in Final Cut Express clear and not fuzzy. I went under effects, then clicked video generators, then text, then scrolling text to get the scrolling credits working. I tried using the Chroma Keyer effect and the Color Key Effect. These work on captions on video and beginning titles but not the scrolling text. All of those were made on livetype so maybe that is why. I would really appreciate some help. I've been working on this all day. I was on the technical support line for about 40 minutes and they told me there is no more help given over the phone for Final Cut Express and that I should go on here and see if anyone can answer my question. I looked on all the forums and there was nothing on this subject. Thanks.

The software is not doing what it should be doing. We have all had this type of problem. It is nearly always somehow in the way the software is being used. Look at your added Chromakey and color key. You must be doing something that the FCE does not like. Open a new project and new sequence and try the exact same thing. (I use titles from LiveType and from the effects tab and have no problems)

Final cut express wont run

my final cut express HD wont run, i tried re-installing it, but it wont show on the applications folder, what should i do? thanks!

Check out this thread to see if any of the suggestions are helpful:-
http://discussions.apple.com/thread.jspa?threadID=1457364&tstart=0

Final Cut Express 3.5HD and Panasonic DVX100ae

Hi guys,
I'm desperate for some advice. I'm seconds away from purchasing a Panasonic DVX100ae but just thought whether or not i would be able to edit the 24p effect on Final Cut Express 3.5 that i'm desperate for. If i can't then i guess its pointless spending so much on the camera. Someone please help!
In advance, thanks to anyone who replies; your a legend.

FCE does not work as well with this camera as FCS does. Some functionality in the camera will not work correctly. 24p advanced does not work with FCE. Basic 24p will work, depending on what you do with the material in the application. For basic editing it's OK.

Final Cut express wont open after Lepard Install

I just installed Lepard to my mac and Final cut wont open...its gone dead, I find out the my version of FC express is 3.5.1, I have been having a few different things happen within the last 72 hours of the install,My dock sometimes doesnt respond,I need some adviser on the Final Cut issue, I have work in there and I need to access it...Help,
itsonlyme...

Every instance is different. There is no single fix for everyone.
Start here:
http://www.fcpbook.com/Video10.html
Then come back and do this:
Please give your full system specifications, what computer, what drives, what camera or deck, how everything's connected, what settings are on the media, what settings you're using in FCE, and finally what version of the software, of the OS, and of QT are you using?

Final Cut crash on 'Log and Capture' selection

Hi guys,
So I have a BlackMagic Decklink Extreme card installed, and hooked up to a Sony J-3 DigiBeta Deck.
When I attempt to 'log and capture' final cut crashes before the capture window pops up. This happens on all setup's (10-bit/8-bit/JPEG) when I have device control turned on (RS-422). If I turn off device control, the capture window opens normally, and I can do a capture now, which is no good to me for logging purposes, or doing offline edits.
So, my question: Is the device control crashing Final Cut due to the fact that Im using an intel mac with Final Cut 5.0.4? Can anyone confirm this for me? Or is there something I can do to fix this? Has anyone experienced this problem?
Device control works outside Final Cut, in BlackMagic Deck Control, so I know its not a card issue.
Im still waiting on a copy of Final Cut 2, its in the pipelines... but in the meantime if there is a quickfix to this, help would be much appreciated, as Final Cut 5.0.4 is otherwise extremely stable for me...
Thanks,

Some background:
720x480 is a non-square format. It can either be the equal of 640 x 480 (4:3) or 954 x 480 (16:9) depending on what you tell your editing software the incoming stream will be.
If you told FCP the incoming stream is DV/NTSC 4:3 and you are getting a pillarboxed image, FCP is thinking you are sending it a 16:9 version and is filling the the sides to keep the aspect ratio correct.
It would help to know a whole lot more about settings within FCP and what your mixer is putting out.
x

Final Cut Pro 7 Log and Capture Frame Sizes

When importing from a Roland VR-5 mixer into Final Cut Pro 7, we get black border/bars on the left and right sides of the preview. We didn't think anything of it, that it might have just been the preview window. These bars are recorded though, it's as if we're not recording the full frame size coming out of our mixer. We went into the settings on the VR-5 and everything was configured to be 720x480, and that the settings in FCP matched. The image still gets cut off. Any ideas?

Some background:
720x480 is a non-square format. It can either be the equal of 640 x 480 (4:3) or 954 x 480 (16:9) depending on what you tell your editing software the incoming stream will be.
If you told FCP the incoming stream is DV/NTSC 4:3 and you are getting a pillarboxed image, FCP is thinking you are sending it a 16:9 version and is filling the the sides to keep the aspect ratio correct.
It would help to know a whole lot more about settings within FCP and what your mixer is putting out.
x

AVCHD wont Log and Transfer

Hello all. So I got this footage that's in the AVCHD format. I have FCS 2, with the latest update. But when I try to use the Log and Tranfer function to open the folder with the clips, I get the error "AVCHD Media is unsupported on PowerPC based hardwear."
I understand that this is because I have the PowerPC Quad G5. Is there any work around that I can use to open these files? Or do I really have to take this project to a Intel G5 and transfer it to some other format?
Thanks in advance.

You need an intel machine if you are running FCP and are working with AVCDEFGHIJK material.
x
fwiw, there is no such thing as an "intel G5". There are the newer intel MacPros or the older PPC G5s.

Final cut express wont log and transfer

Similar Messages

Maybe you are looking for