Final Cut Fails to Share

Hello
I hope you can help as I am no longer able to share projects to DVD since upgrading to v 10.1
I get error
com.apple.compressor.compressorKit.ErrorDomainerror -1
Any clues?
Thanks in advance

Just to add to Tom's advice, the Compressor folder you trash is the one in your Home folder.
Also, I ran into that problem oftrying to delete an old batch. Try clicking at the top of the batch – like so – and see whtherr it makes a difference.
Russ

Similar Messages

Final Cut Pro X share fails with QuickTime Error -50

Hello!
I'm facing a very annoying issue when trying to share my project from Final Cut Pro X. It used to work perfectly fine but now I'm getting consistently "QuickTime Error -50" after FCPX exported about 10% of my project. This can be reproduced with other project as well - one time I was able to export by restarting my machine but not anymore.
My configuration is a Mac Pro early 2008 with a ATI Radeon 5770. The only recent change I did to my config was to upgrade my old graphic cards to the Radeon 5770: do you think this can be the cause of this error?
Thanks for any help,
Jean

I am also expriencing the same error. Tried every solution listed so far:
1. Switch off background rendering. Trash render files. Don't render. Export.
2. copying the project within Final Cut Pro into another project
3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
What's going on?

HT4775 Final cut pro tab share does not work with mountain lion V10.8

I have upgraded to mountain lion and since than the tab share in final cut pro X is not working anymore.
Any suggestions??? Thanks

Trash preferences and repair permissions in Disk Utility.
If that doesn't free Share up I'd drag app to trash, reinstall it and run repair permissions again.
Good luck.
Russ
BTW, not that it matters a lot, but this is the Compressor forum.

Final Cut fails to open, network users?

I am having the same issue as this discussion ( https://discussions.apple.com/message/12447873#12447873 ). I have done everything that was stated in this discussion. I have a lab with 20 21.5" iMac (Late 2009) all running 10.6.4 and FCP 7.0.2.
As stated in the previous discussion, this is occuring with multiple users on multiple iMacs. The users log in with their network credentials to authenticate against a windows server 2008 DC however the user account data is stored locally on the iMac HD. The iMacs are also joined to a xServer running 10.6.8 server and the iMacs are part of WOrkgroup Manager. When a user encounters he issue, I need to go into the users homefolder (on the iMac) user>Library>Preferance>Final Cut User Data>Final Cut Preferences and I delete that file. That user can then launch FCP and it will work correctly until they quit FCP. The next time that use opens FCP it goes through the launch scree and then quits. ( No error logs, just dissappears). If I have that user log out and then log in as a different user it will work fine (Again this user has their home folder saved to the local iMac HD but is using their AD crediatials to log in.)
Any thoughts or ideas how to resolve this issue? Any help or advice is greatly appreciated!

I am having the same issue as this discussion ( https://discussions.apple.com/message/12447873#12447873 ). I have done everything that was stated in this discussion. I have a lab with 20 21.5" iMac (Late 2009) all running 10.6.4 and FCP 7.0.2.
As stated in the previous discussion, this is occuring with multiple users on multiple iMacs. The users log in with their network credentials to authenticate against a windows server 2008 DC however the user account data is stored locally on the iMac HD. The iMacs are also joined to a xServer running 10.6.8 server and the iMacs are part of WOrkgroup Manager. When a user encounters he issue, I need to go into the users homefolder (on the iMac) user>Library>Preferance>Final Cut User Data>Final Cut Preferences and I delete that file. That user can then launch FCP and it will work correctly until they quit FCP. The next time that use opens FCP it goes through the launch scree and then quits. ( No error logs, just dissappears). If I have that user log out and then log in as a different user it will work fine (Again this user has their home folder saved to the local iMac HD but is using their AD crediatials to log in.)
Any thoughts or ideas how to resolve this issue? Any help or advice is greatly appreciated!

Final Cut Fails to Launch - No Error Message

I have tried the following:
-Trashed Prefs.
-Loaded and used FCP Rescue
-Completely wiped the machine of Final Cut Studio and reloaded
Still, the following happens: Once I trash the prefs or run rescue, FCP loads fine. I can work on saved projects, etc. However, when I close the program and try to reopen it, the same thing happens again; it will go through the initial startup screen, and as soon as it gets to the point where the workflow area would come up, it closes. No error message or anything - just sops working.
I've updated the machine completely, and all software is to date. The only thing that's happened recently - incase this gives anyone an idea of what's wrong - is that I used Boot Camp to remove the XP partition I had on the machine. In addition, I've tried to change the main user data to another editor, as I recently upgraded my machine to a Quad 3 Mac Pro... Would changing user settings effect FCP? Even though I've since completely wiped it and started over?
G5 Intel IMac 2.0Ghz Mac OS X (10.4.7) Final Cut Studio 5.1

Create a new user account and see if FCP opens for the new user. If it does then there's something going on with your user prefs.
Make sure you don't have this license running on more than one machine at the same time.
There may also be a corrupt file, is this problem associated with a particular project being loaded or file being used?

Final Cut Pro X share operation failed

Recent error message when sharing to custom compressor settings stating Share operation [project name] Failed (com.apple.Compressor.CompressorKit.ErrorDomain error -1.). Unsure why 30sec 720 x 576, 16:9 won't share to custom settings 1024 x 576, 1:1. Always has in the past. No change in filetype or codec. Any guesses? Have emptied render files etc..

Update to 10.0.9 and see whether it's fixed.
Russ

Final Cut Pro 7 - Share - Blu-ray - ERROR

Fresh install of OS and FCS.
Ran a quick test to make sure this would work:
File - Share - Blu-ray
Burned to disc then and there, and it was successful on an eleven second portion of the clip with an in and out point on the timeline.
The result was a beautiful Blu-ray quality 11 second clip recorded onto a DVD-RW, and it played back fine on a PS3. (AVCHD)
Extended the in and out point on the same clip in the same timeline in order to do a 20 minute version of the same thing. 2.5 hours later, it ejected my blank DVD I had already inserted, and asked me for a Dual Layer. I put one in, and it ejected that one, too. I kept trying different blank media and eventually it tells me:
There was an error burning your disc.
Operation could not be completed. (DSPPublishing error -1006.)
Hit "Try Again" and after a few minutes it says again,
Please insert the dual layer media to burn the
disc "name-Blu-ray".
Seems to be an endless loop. It's reporting the final size will be only 1.6GB, so I don't know why it's asking for a DL disc. I spoke to Apple today and they told me this feature was not compatible with DL media at all anyway.
If anyone can help...

Update and WORKAROUND:
I have been experimenting and here's what I've learned:
I'm thinking the new "Create Disc" is the cause. The encoded files generated by FCP7 and Compressor 3.5 are fine. One whacky theory of mine is the programmers made a typo where if you encode a file like this over 1GB the burn fails. I don't know, I'm just saying, it's probably something simple like that.
I spoke to Apple, too. First I had someone tell me it failed because I tried a clip larger than 25 minutes, so I tried 20, and it failed, too, the same way. (I also previously encoded a 3.5 minute clip and it was excellent.) This person also told me Dual Layer was not supported at all. He was completely wrong.
I called back and this time it was a guy named Bob. If you ever call and speak to him, just do him a favor and hang up on yourself and save him the trouble. He won't let you speak to tell him the problem, and even if you are calm and try he's the type to tell you to "calm down, sir." He literally told me "there is no Blu-ray feature" in the new FCS. I merely asked if he had seen the new Compressor and he told me he knew everything, and asked me to have a nice day before hanging up on me. I know he's an anomaly at Apple.
I called back and spoke to someone else, and they gave me this link:
http://www.kenstone.net/fcphomepage/burn_br_mac_superdrivestone.html
After I read it I thought, "that's exactly what I did!" But it doesn't work and that's why I'm calling. (Even that article reports odd bugs.)
I called again, just because I know this needs to be fixed. Finally I spoke to someone who passed it along, and they are going to look into it. Get this - he checked the FCS manuals and discovered that it is indeed a feature that should work. Maybe they will name the patch after me.
So I also found a solution in the meantime. I've read hints here and there, but this is what has just worked for me and I wanted to verify before posting and sharing it:
Do the encode with Share in FCP7 or Compressor 3.5. Screw what anyone tells you about "maximum size" or 25 minutes or even what Compressor tells you regarding the number of minutes of footage the disc will hold. It's wrong. And, it will support Dual Layer discs. Go by the file size in the summary, and that's it. (I'm talking about AVCHD here, nothing else. It's the Blu-ray setting and you can change it to AVCHD to burn on a DVD-5 or DVD-9, in the manual it says "red laser media.")
If you want to burn to a DVD-5 stay under around 4GB for your video, but you can experiment with the details. You have a minimum of 5Mbps and a max of 17Mbps in a VBR. Seriously, use whatever you want, as long as it will fit on the media. This is also about H.264, not MPEG-2.
Export to files, and make sure you do NOT burn from FCP7 or Compressor 3.5, because that will cause the problem. It will even completely ruin your blank media, but you may think it's still blank because they will be detected as blank media, even in other systems. But they cannot be used, ever again, merely for trying with "Create Disc."
In the end you will have two files:
movie.264
movie.ac3
If you have two files with those extensions and they don't have the exact same file name, rename them, but keep the extensions.
I used Toast 9. Blu-ray Video option. Add - locate the two clips with the same names with .264 and .ac3. They go in, deal with the ugly menus, but make sure you do this:
In the Encoding settings:
Custom
MPEG-4 AVC
Average Bit Rate: to whatever you used in Compressor or FCP7.
Maximum Bit Rate: may as well set it to 17 (we're trying not to re-encode the files)
Motion Est - Best - check the Half-PEL box
Reencoding - Never (that might make the above a waste, but it only took a couple seconds so stop complaining.) Set the rest to the same settings in the same way.
Choose your blank media and burn it, and few seconds later you can slap it into your PS3 and watch the creamy smooth silky beautiful encode right there.
I read somewhere it retains the FCP color settings and that's probably why doing it this way is a thousand times better than using Toast to encode (which skips really bad in my tests). I've also tried Encore and it was ugly and looked like it skipped frames.
Anyway, "Create Disc" may not work right now, but the encodes are amazing. I hope this helps others from banging their heads against the wall, and from calling Bob. I just burned a 2 hour movie onto a DVD and played it back on a PS3!
For further reading, here are some interesting links I found:
http://www.shedworx.com/revolverhdmac-faq
- Talks about Apple's support of H.264 "High Profile" - they type needed for AVCHD and Blu-ray movies.
http://manuals.playstation.net/document/en/ps3/current/video/filetypes.html
- PS3 supported file types.
http://blogs.adobe.com/davtechtable/2008/03/updated_march_2008_workingwi.html
- Interesting times of various encodes on different systems. For Encore, but comparable to Compressor for time differences.
If this has helped you, Apple owes me some money, and you're welcome.

Final Cut Pro X - Share - Export Media - H.264 - Audio is panned to the left?!

My video has a soundtrack that is a stereo .WAV that I can play in QuickTime with no problem.
I added the .WAV to my FCPX project, exported H.264 of the finished video, and when I play the resulting file in QuickTime, the audio is panned to the left. There is still some stereo separation but it's like the right channel has been turned down. Alternately playing the video and the original .WAV in QuickTime makes it extremely obvious, but it's actually noticeable (and very annoying) even without the comparison.
Does this happen to anyone who exports H.264 via the Share -> Export Media menu item, or is it something in my project? (I didn't do anything to the audio apart from dragging it onto the timeline - I tried deleting the audio and dragging the file back on again but it still ends up panned to the left in the output).

It was set to Surround and 48Khz. I set it to Stereo (and 44.1Khz for good measure, as that is the sample rate of my soundtrack) and then re-exported to H.264, and now the audo is perfectly centered.
So that's perfect, thanks.
Now the only thing wrong with FCPX is how it crashes every ten minutes or so!

Final cut pro wont share video

it has shared prevoiusly but i ahve changed the project and want to share again. the share option allows me to select but the background task says 0% and doesnt move. its happeing on all my projects. am currently using trial version. is htere a limit to number of exports?

No, there isn't.

Final Cut X render/share

I was trying to share a 1.05 min video. It was taking an entire day to render, so I stopped it. Now it won't share at all! Any suggestions?

Trash preferences with this app. fron Digital Rebellion.
Turn off Backround Rendering.
Delete Project Render files from within FCP (under File after project is selected in library).
Create a new project. Copy the problem project. Paste the problem project into the new project.
Do a range selection of a short section and seee whether it will export as a master file.
Good luck.
Russ

Final cut will not share file

I have just completed a file. (1.3 hours long) I am using an Lacie external work from and save to. I can not share this file in order to make a DVD. One frame is saved not the entire file... Sugestions please. I've put in many hours to comeplete this

FINAL CUT PRO X Share to DVD issue

While sharing to DVD it is taking 15 hrs to complete. Can someone please help me find a solution as to why this is taking so long.

NikkieTutorials wrote:
Thanks so much, Luis! Could you maybe direct me to a tutorial that teaches me how to create a destination that exports to master file + YouTube in one go?
But of course :-)
Let the guys from Ripple Training (Steve Martin and Mark Spencer) explain it in one their great MacBreak Studio weekly episodes:
MacBreak Studio: Episode 194 - Destinations and Bundles ...

Instructions: Create Blu-Ray disc in Compressor with Final Cut TImeline

I searched mightily for simple instructions on how to do this. The Compressor help files are woefully inadequate in providing a simple walkthrough to do this. Burning a Blu-ray directly from Final Cut does not allow one to optimize the conversion like compressor does. So:
1) Right click your chosen sequence in Final Cut
2) Click "Share" The Share dialog box will come up.
3) Choose "Blu-Ray" in the destination drop down in the top-left corner of the Share window (don't forget to choose the destination location of the files at the top of the dialog)
4) Click "Send to Compressor" in the bottom-left corner
Compressor will open and a job will automatically be created with Blu-ray video
and Dolby ac3 audio. Set options and submit as usual in Compressor

The send to compressor option occasionally creates problems. Most people would recommend exporting as a self-contained movie, then bringing that into compressor and using your workflow from there.

Final Cut Pro X Stuck at 0% when Sharing

Hey guys,
Having issues with my final cut pro x in regards to sharing. Anytime I share a project, either with my custom compressor setting or with default share settings it gets stuck at Zero% then I have to restart the computer, click share again and then it works.
I've already deleted the basic final cut pro plist files User/Library/Preferences/com.apple.FinalCut.plist & com.apple.FinalCut.LSSharedFileList.plist, Restarted machine and same issue occurs. I've even run all the final cut pro x updates and still same issue.
Anyone have any ideas on what could be causing the share function to get stuck at 0%?
Thanks

Here are some possible solutions:
Final Cut Pro X Share Export Problems
http://fcpx.tv/Pages/shareexport.html
- Richard

Final cut pro dvd fails to share

Over the past few months Final Cut Pro Share DVD fails most of the time. I tried restarting the program and my mac to no avail. I end up moving the video to my macbook and sharing the dvd on it. I am running OX 10.9.5 Final Cut Pro 10.1.3.

The error message seemed to indicate an encoding problem – apparently to DVD specs. See id you can verify this by choosing Output Device>Hard Drive in Settings in export dialog. If it fails, leave FCP open and go inside the library bundle and open up the Shared Items folder. If there is an m2v file and an AC3 file, drag them to the Desktop to save them from being deleted when FCP is closed down.
Let us know what you find out.
Also

Final Cut Fails to Share

Similar Messages

Maybe you are looking for