Final Cut Not responding after computer is in Sleep Mode

I put my computer to sleep for a few hours when I go away on a shoot. When I come back and wake the computer, final cut gives me the spinning wheel of death and is not responding. What is even more annoying is when I go to force quit the program, it doesn't quit from the task bar and the dot under the icon of final cut is still lit. Even after trying 10 force quits it still stays active. I am forced to shutdown my computer everytime and this problem happens everytime the computer goes to sleep and is woken up.
Is there a fix to this?

Which version of FCP?
Are you on a network?
How many drives are in your Mac?
And, if there is more than one drive, are you absolutely certain you placed your registration information on the correct drive?
The usual explanation is that FCP is trying to locate or verify the serial number (different behaviors in different versions). The drive where that info is stored is inaccessible (because the drive is not spinning and so is the same as not mounted) to FCP (which is loaded into RAM) and totally active.
bogiesan

Similar Messages

W510 eSATA/USB2.0 combo port does not respond after waking up from sleep mode

Has anyone tried to connect external DVD/CD player or burner to the eSATA/USB combo port and experienced very slow system performance after waking up from sleep mode? It might takes minutes to launch an application program that usually takes just few seconds. My W510 can not even restart. It will just stop at the Thinkpad logo if I tried to restart after waking up from sleep.
The funny thing is if I moved the external DVD/CD player to the USB2.0 port in the back, everything went back to normal. I don't know if this has anything to do with the fact that the combo port has something to do with eSATA.
Thanks

It seems that this problem is unique to my system. I am hoping that one of the Mac Guru's will have at least a pointer in the right direction.
Thanks.

Satellite P850-30W - Fan does not run after coming back from sleep mode

I got a Toshiba Satellite P850-30W with bios 1.90.
Sometimes the fan does not run at all after coming back from sleep mode on windows 7.
This has happened twice (maybe more times without me knowing), and Ive had the computers for a month.
Normally the fan starts running when the CPU gets over 50 celsius, and stops under 50 celisus...
I tried running Prime95 when this fan-issue occured and the computer temps got dangerously high (close to 100 degree)! the fan did not start at all
...this error could potentinally damage the laptop...
to get the fan running again I have to restart windows
anyone else experienced this?
I guess the fix would be to never use sleep-mode...or toshiba needs to fix it with a bios update.

What kind of answer do you expect here in user community?
Exact info about the fault? I dont think that somebody would be able to provide exact answer but just speculations
In other Forum you can read about Satellite notebook; but is it exacts the same model?
No, it seems to be an L650 series. Its completely different series .
From my opinion its not software related problem.
BIOS issue?
Well, in case it would be a BIOS issue, the problem would appear always and not sometimes after being shut down 200 times.
It could be a hardware related issue. Memory? Maybe
In my personal opinion to get more details hardware diagnostic software should be used in order check the hardware for possible malfunction. Thats my personal opinion

Cant connect to internet after computer goes to sleep mode.

Everytime my computer goes into sleep mode it wont let me connect back to safari. It shows im connected but wont connect. Can anyone help me?

Hi there. I have the same sort of problem with my MacBook. To get the internet working again I have to restart the system. Sometimes the same sort of thing (shows I'm connected but doesn't really connect) happens when I'm in the middle of using the internet. I've posted a topic ("Problem with AirPort?") about this also and I've gotten a few responses already. Maybe one of them can help you out (no luck for me so far though).

Windows 7 Does Not Respond after it goes to sleep

We are using Windows 7 image distribution through SCCM for our entire organization. Lately, I came across this issue, now becoming more common on all
the systems. The computer won't wake up from sleep by pressing any key, if left unattended for more that 30 Mins (rather after it goes to sleep). A forced Restart is then necessary to return everything to normal. We are using Dell Latitude E series laptops,
as a standard all throughout our organization.
Already tried lot of option like - upgrading the drivers, changing the power plans etc. However, neither of them worked. Any suggestions in this regard
are highly appreciated.
Thanks,
Sam

These type of issues can be solved by performing a startup repair.
http://windows.microsoft.com/is-is/windows7/products/features/startup-repair
additionally this may be helpful
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01853693
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/windows-7-your-computer-cannot-come-out-of/20ffb7a3-7f0c-46f9-8516-c1e31b11e558
Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

Compaq C700 - CPU fan not running after waking up from Sleep mode

Hi guys,
Waking up from Sleep mode does not start the CPU fan.
Kernel: 2.6.32-ARCH
KDE : 4.4
Let me know what other details you need.

I was having the same problem after installing mountain lion.
What i did was in Finder went to /Library/Preferences/SystemConfiguration/ and deleted all the networking plists (refer screen shot). Then restarted the Mac and in Network Preferences reconnected to my WLAN.
That solved the problem.

Power button does not respond to put phone on sleep mode

Any way to resolve or common issue

Try performing a system repair as this will often fix issues - This will factory reset your phone
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the onscreen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Final Cut not starting up on new computer

I recently had my computer stolen. I had installed final cut hd on that computer which was stolen. I replaced the computer and installed Final Cut Express HD on the new one.
Now, when I try to open final cut express, it starts to open, and then it stops and does not open.
Can anyone advise me on what to do?
I'm on an iMac OX 10.4.10
Memory 1 GB 667 MHz DDR2 SDRAM
Processor 2.16 GHz Intel Core Duo 2

Hi, Is that an upgrade, you are trying to install and not the original program?
Sorry to hear about you having your laptop stolen. Would not like that one bit.All Dave

Application not responding after trying to open event

Hi,
I just updated to Final Cut 10.1.3
I was working on a project in final cut and my computer crashed. When I restarted my computer and Final Cut, it seemed ok. It opens on the project I was working on before the one I was working on when it crashed. When I go to scroll up in the event, towards where the most recent projects are, eventually I get the spinning rainbow of death and then final cut stops responding. I have forced quit and restarted it but the same thing keeps happening. When I open other earlier projects in the same event, they seem to open and work fine.
I tried 'Update Projects and Events' but when I click 'update all' it says that it can't find anything to update.
Please help!
Thanks,
Cat

I am having the same problem;
I am working on a project in FCP 10.1.4 and every now and then, usually after making an edit, FCP starts to reload projects and then hangs when trying to load one of them (not always the same one).
I have to force quit, restart deleting preferences, then after a while it happens again.
In the Activity Monitor there are two precesses not responding - LaunchDaemon and Codec32BitTool.
2 x 2.4GHz Quad Core MacPro, OS10.9.5

My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

Firefox Not Responding after Installing Microsoft Office 10

After installing Microsoft Office 10 (student and home edition) on my laptop, I noticed that Firefox is going into the state 'Not Responding' every time I access it - it takes about 10 secs to 'think' and then comes back online. It continues to do this every time I want to access a new page, new link, click on mail in Yahoo Mail, etc. Has anyone experienced this issue?

1) Check the $IAS_ORACLE_HOME/Apache/JServ/etc/logs/jvm
has servral logs for OACoreGroup Servlets that are initialied
2) You might have to enable the debug option in jserv.properties and jserv.conf
(find IsItWorking.java in Metalink for the appropriate note )
3) If this is 403 forbidden then check trusted.conf alongside httpd.conf
pls keep posted about how this issue got resolved.
Sunil
JSP not responding after installing 11.5.10.2 on IBM
HACMP
i have finished installing Oracle applications
11.5.10.2 on IBM clusters (HACMP version 5.1)its a
multinode setup with mutual failover. other
applications are working fine. the installation went
well. but the final part on the middle tier , during
the post install checks it says JSP not responding. I
checked the apache error-log and saw the follwoing
entry
[Sun Apr 23 21:04:21 2006] [error] [client
172.29.200.74] client denied by server configuration:
/appl/oracle/devcomn/portal/
DEV_erpappssrv/oprocmgr-service
>
that bafles me because that ip address was not used
in the installation. its the persistent ip address of
the HACMP. the service ip that was used in the
configuration file was 172.29.200.75
however there is no mention of this in the error
log.i also edited the oprocmgr.conf in the
Apache/conf directory after which i dont get the
error however the servlets pages then hangs and
returns page cannot be displayed error on internet
explorer. no error is registered on the error log.
the jdk am using is 1.4.2 which is the recommended
one.
what this means is that i cannot access the self
service pages and as you know you need self service
pages to access the application in 11.5.10.2
i opened a TAR with oracle on 8th April 2006 and till
today i have not been able to get a solution.
I am hoping that i will get someone in this forum who
has met a similar problem or who has an insight into
how we can solve this problem already am weeks past
the target go live!!!
Please Kindly help
Jeremiah Ochieng

I am having an issue burning DVDs on Final Cut Pro X. After 15 minutes, I get a QuickTime Error:0. Anybody have a solution to this?

I am having an issue burning DVDs on Final Cut Pro X. After 15 minutes, I get a QuickTime Error:0. Anybody have a solution to this?

I'm sure the pros will be along to ask what your settings are. Although this may not be exactly helpful, I did find compressor to be much more robust for burning DVDs. This could partially be because it includes a template to convert you movie into correct DVD format. I was quite pleased with the outcome after multiple failed attempts using FCPX alone.

Is there any to add final cut X to another computer without buying it again?

Is there a way to add final cut x to another computer without purchasing it again, or is one license per computer.

What innocentius said; or redownload from the App store.
Your license is not for just one computer, it is valid for all computers that you own and control. This is true for the all the apps you buy in the App store.

When I try to open firefox it says that it is not responding, after I disabled the adobe flash plug-in it worked, how do I get it to work with flash

Since I updated my adobe flash player firefox keeps saying that it is not responding after I open it and it loads my home page, I disabled add-ons and went throught the process of figuring out which one it was and it was adobe flash, but without flash I cant access a lot of different sites, how can I fix this. I have tried uninstalling and reinstalling both firefox and adobe flash, but neither works!

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Final Cut Not responding after computer is in Sleep Mode

Similar Messages

Maybe you are looking for