Final cut pro 10.1.4 freezes up

Please help. Final Cut Pro X 10.1.4 opens but freezes up won't respond. Is there a fix for this?

Reinstall FCPX, or post more info about the freeze.

Similar Messages

Final Cut Pro HD 4.5 freezes on output to VHS and other weridness!!!

Gents and Ladies,
First time poster...I feel all warm and fuzzy on the inside...really I do...
My Brand New G5 dual 2.7GHz blah blah blah is freezing up on out put to VHS. I am using a JVC SR-VS30 Mini-DV/SVHS dual deck.
Why VHS? I work for a school district and that's the cheapest stock possible.
Anyway... the board meeting tape I output last night all the sudden freezes after like 45 minutes of recording. It litterally screwed up right after I left the office last night. I actually stayed with it for 45 minutes and "held its hand" to make sure everything went along alright. Right after it left..."feeeze frame, freeze frame...now freeze..du du du na na na"...did you ever hear that song?
Anyway...to make a long story short...while watching the tape this morning...it was just stuck for like an hour like that. I turned it off after 30 seconds but after fast fwd'n the tape...it just kept recording like that.
Totally unbelieveable. I love how Macs need to rest before it starts to work. It grabs a cup of Joe and a bagel...reads the morning paper...returns a few emails...then it MIGHT be ready to work...if your lucky. And then...if your not looking...it'll randomly fail. I love that...so..what I do...is I try to trick it into working for me...yeah...I trick it...:)
Anyway...so I want to run Disk Warrior. My screen saver is turned off, my hard drives don't go to sleep, all the things you might think would cause it to go off line over the course of 3 hours... I have turned off. It would seem...at least to me...that when it tries to Auto Save the glitch kicks in.
The other thing is that I record the meetings on an NNovia Quick Capture HD DVR via Firewire. It has worked many times before...flawlessly. The copy is fine...the file in Final Cut is fine. It even previews to a TV monitor nicely...but on output...its choking on the toothpaste when rinsing.
JB
G5 Dual 2.7ghz H2o cooled Mac OS X (10.4.4) Double dipping on RAM

O.K. cool.
I did change Auto Save before any of this even happens. I made all these very changes on my previous dual 2.0 G5. That machine...although much slower...always worked...never faultered...very dependable. Quite honestly the best Mac I ever worked on...until new versions of stuff came out and ruined all my fun.
I have changed all the pertinant settings...at least I thought.
Do any of you think I should ask for the upgrade to 5.0? Does it have any fixes in it that make it worth it? The new machine is what has made the bugs pop up. For a while it wasn't even recognizing my deck then one day it started working. Any thoughts on that... let me know. I am not a huge fan of the Dual JVC deck but it has worked pretty well. Now I use this DVR and it works really well for long running board meetings. At least VHS does what its told...:) With DV you always got to wonder if you've dropped some frames. Even if I am recording to a Hard Drive.
Before this gig I worked on the "last run" dual something G4 Quicksilver's and they all ran horrible. FCP3 and bugs everywhere. After that disaster I then jumped ship all together to a Canopus Premiere Pro system on a DVStorm2 Pro + card. That is a nice system. Great Chroma Key stuff. Now at this gig I have been working in Mac again. I was hugely surprised by how well the G5 performed. It did get a little slow for me eventually. Honestly my single P4 in combonation with the Canopus Realtime Preview Board really beat it up quite badly. Even that still had to render in the end but at least I could see everything while I was working. Render time was pretty fast in the end too. I think that has been my favorite DV Editing solution on PC.
I really like Final Cut Pro. I think it quick and dirty...just the way I like it. I started out learning on Avid and if the company I worked for used it...I would prefer that truthfully but I have been riding FCP for 3 years and counting and every place I work at is Mac so...I am totally on this boat.
Any opinions on the Intel stuff yet? I would be interested in perf as I would like to get a Mac system at home and sell my Canopus rig...all thought I do love it so.
BTW...no...no error messages at all...
...and I would've styaed with it last night if I didn't have to finally leave after another 10 hour day...tonight I have a 2 hour video after work and then Sat/Sun we have a huge music festival and that will 2 12hr days...so...if I didn't need sleep...I would'e been able to stay some more...
;)~
...Oh and I have a 250 GB Serial ATA system drive and a 250 GB A/V Storage drive.
FCP stuff on A/V Drive
iMovie/iDVD stuff on system
...has always seemed to run better like this.
Many thanks for the ideas and for any future input.
JB

How can you fix corrupt Project Files in Final Cut Pro X?

Hello All,
I have reason to believe that one of my project files in Final Cut Pro X is corrupt.
How may I begin to resolve this issue? Is there a third party software someone could recommend, like Digital Rebellion (if they have software for FCP X, I'm not sure) that may improve, if not hopefully solve this issue?
Many thanks!!
Molly

Had a similar problem.
Follow it here:
http://www.fcp.co/forum/4-final-cut-pro-x-fcpx/11076-freeze-during-export
among other steps taken I used Corrupt Clip Finder to isolate/remove the culprit and all was OK after that
no idea how/why the file ( which I''d been using over 5 previous versions) became corrupted

HT5958 We are 4 min in to editing a video on final cut pro. now my computer is freezing up. I have heard that this is a glitch from downloading. (beyond frustrated) is this from working from 2 external hard drives? PLEASE HELP! =)

PLEASE HELP. =)
we are about 4 minutes into editing a video for the first time on final cut pro x 10.1. everything was going very smoothly, but then it started freezing up. I had to do a hard reset and took it into the computer store that actually installed final cut for us. they suggested that our mac actually is not capable of keeping up with final cut. (I FIND THIS HARD TO BELIEVE!!) We work on an IMAC 2.66 ghz intel core 2 duo. 8 gb 1067 mhz ddr3. software os x 10.9.1 (hopefully that info will help for your suggestions) Because we have soooooooooooo many hours of high def video, we are working off of two external hard drives.... is this a problem?? or do we really need to upgrade our computer?????

Like Russ said, check Activity Monitor and see what else is running and turn off any Applications that aren't needed.
Turn off wi-fi or disconnect the wire that goes to the Internet
Turn off Background Rendering (if you see an orange line on the top of the time line that moves along and gets shorter while you're not doing anything that is a good sign that Background Rendering is running.
I haven't used 10.1 yest but on the previous version there was a small circle approximately in the middle of the screen, about 1/2-inch or 1 cm in diameter, and it would have a number inside. The number is the percent complete of what is hapening. When it is Rendering the percentage will be shown.
Basically, you probably need to free up resources.
For what it is worth, my previous Mac Pro was a 1,1 2.66 machine, also with 8GB of, I think, 667 memory, and it would process FCPX 10.0.9 okay. It did have an upgraded video card, though.

Final Cut Pro X keeps freezing when sharing my work to You Tube, it does about 90% of the upload and then seems to get stuck. Any ideas on how to resolve this please?

Final Cut Pro X keeps freezing when sharing my work to You Tube, it does about 90% of the upload and then seems to get stuck. Any ideas on how to resolve this please?

this is a perfect question to ask the users in the FCP X forum. Good luck. https://discussions.apple.com/community/professional_applications/final_cut_pro_ x

Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Thanks

Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Apple support says I have to pay £85 for to help me. Thanks

Just a word of advice. Never ever use the word "urgent" on this forum

Final Cut Pro Freezing

When I open Final Cut Pro, it opens fine. I check out sequences for about 30 mins without any issues. Then I edit something in one sequence. I am able to do my editing just fine. But then I get a message that the project is loading. I thought that the project had already loaded by now. What is worse is that after my edit, Final Cut Pro freezes entirely. Even after waiting another 30 mins, the project still appears to be loading. I have to force quit Final Cut Pro and restart it to be able to do anything. On the next load the same thing happens again. I am running the latest version of Final Cut Pro (just downloaded the Blu-Ray fix which fixes an issue I had before. I have to ruin numerous discs with projects being written on them only partially) on a Mac Pro late 2013. I am wondering what the issue is and how it can be fixed. As is, I cannot be very productive with Final Cut Pro.

I've no idea what is causing your problem but you should try the general troubleshooting strategies below if you have not already done so.
You also need to check that your hard drive is not more than 80% full and ideally you should be using an external hard drive.
Incidentally you can't be still using OS X 10.5.8 ?
Use this free app to trash the preferences. This should be the first thing you try when any problems occur.
         http://www.digitalrebellion.com/prefman/
2. With FCP X shutdown, hold down option key and select Go>Library>Application Support>Final Cut Pro . . . trash the Layouts Folder.
3. Open Disk Utility and Repair Permissions.
4. Trash FCP X using this free app and reinstall it.
      http://www.digitalrebellion.com/fcsremover/
5. If these 4 measures don't work, create a new User Account (Admin) in System    Preferences and try running FCP X from that as it sometimes works miracles.

Final cut pro x freezing while trying to background render. Won't budge.

Final cut pro x and my brand new computer is freezing while trying to background render. Help!!!

I can't give any specific advice but try these general FCP X trouble-shooting suggestions.
Use this free app to trash the preferences. This should be the first thing you try when any problems occur.
http://www.digitalrebellion.com/prefman/
2. Open Disk Utility and Repair Permissions.
3. Trash FCP X using this free app and reinstall it.
http://www.digitalrebellion.com/fcsremover/
If these 3 measures don't work, create a new User Account (Admin) in System Preferences and try running FCP X from that as it sometimes works miracles.

Final Cut Pro X is freezing as it loads one project.

I have been editing with X for several weeks now with only the occasional hickup. Now, having spent the entire day editing a rough cut, I am no longer able to open Final Cut Pro. If I do, it freezes on the project I was working on. It tells me that currentversion.fcproject is not available at the moment.
If I delete the project it opens no problem. Does someone have a fix for this? and do I need to restart?
The other issue is how do I stop this from happening in the future?

Try starting a new project and copy the currentversion.fcproject from the movies/final cut projects & movies/final cut events to the new project folder. You will need to import your source files to the event library again.

Final cut pro x kip freezing

My final cut pro x keep freezing?

A few general FCP X trouble-shooting suggestions.
Use this app to trash the preferences.
http://www.digitalrebellion.com/prefman/
It should be the first thing you try when any problems occur.
Open Disk Utility and Repair Permissions.
Check you have plenty of space on your hard drive …… ideally you should have a separate one for video files.
Shutdown all other apps.
If you have a problem simply opening FCP X, create a new User Account (Admin) in System Preferences and try running FCP X from that as it sometimes works miracles.
These 3 links contain more detailed info on troubleshooting FCP X problems.
http://support.apple.com/kb/TS3893
http://fcpx.tv/troubleshooting.html
http://www.lafcpug.org/Tutorials/basic_fcpx_troubleshooting.html
Message was edited by: Ian R. Brown

Final Cut Pro 4 Freezes at startup

I have a new MacBook Pro laptop and am still running Final Cut Pro 4. I installed it, went to boot it up and saw an error message that said I didn't have an AGP graphics card. I was able to fix that with some help.
When I went to boot up the program after fixing that problem, it would start to load and then freeze at the the "loading audio filters" portion of startup, when the splash screen would come up.
I don't know what to do. I was told at the apple store, when I bought this computer that something called Rosetta would allow me to run PowerPC-based programs on this new Intel-based computer.
How can I get this problem fixed so I can run Final Cut Pro 4 on my laptop?
Any advice would be great, unfortunately right now I can't afford to upgrade. So, hopefully there is a simpler, cheaper way to do this.
Thanks,
ismagent

isy,
One of the things dilettantes in the computing world (or those that have drunk Apple's purple punch) fail to understand it the enormous complexity of editing moving images. Once you get your head around the difficulty of this, you will never take the bland assurances of some salesman without some independent checking.
Would you purchase a car with a satellite radio to play your old 8 track tapes just because the salesman calmly told you, "oh certainly, this baby will play those 8 track tapes better than the original players would."
+Caveat Emptor+ applies to ALL things computer - especially highly specialized applications sold by people who neither use nor understand their particular quirks.
Glad you'll get it sorted out and, in the immortal words of the Who, "won't get fooled again".
Have fun.
x

Final Cut Pro 7 Mountain Lion Playback Freeze FIX

Hello,
I'm still running Final Cut Pro 7 on Mountain Lion, and I ran into a problem where the program would freeze whenver I tried to play in both the canvas and the viewer. I seem to have fixed it on my computer, and wanted to share my fix in case anyone else ran into the same problem. I tried deleting both Final Cut and Quicktime's preferences, but that didn't fix anything. Then, I happened to look at the console, and discovered the following message right around the time that it froze:
8/7/12 11:11:53.244 AM Final Cut Pro[702]: Address book access is denied for executable at path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
I thought that was odd, since I don't see any reason that FCP would need access to my address book, but I decided to go check in System Preferences -> Security and Privacy -> Privacy -> Contacts. I discovered that FCP was already listed there, and the checkbox for "Allow these apps to access your contacts" was unchecked, so I decided to check it. And then it worked! It no longer froze during playback. I have no idea how that relates to playback, but it definitely fixed it for me, and so I hope that maybe this well help someone else who is having trouble.

I've seen this issue with my mac pro 2008:
While the programs still work fine, one fundamental change that Apple has made in Mountain Lion is to push more of the responsibility for displaying the image on the computer monitor to the GPU of the graphics card. Previously these responsibilities were shared with the CPU. Therefore, if you have an older graphics card (even if it is fully compatible with FCPX, as ours are), FCP6/7 has a difficult time playing back 1080 video in the Canvas window (at any size), without breaking up when there is some degree of movement in the video image.The screen cannot refresh quickly enough to draw the video image without showing horizontal banding and some minor digital garbage.

Final Cut Pro X Keeps Freezing Up

I'm running a new late 2013 Mac Pro with Final Cut Pro X, OSX 10.9.3, a 4TB Lacie Thunderbolt and a 2 TB Lacie Rugged.
I'm wrapping up a documentary and I have not had any problems with FCP X freezing up until now that I'm using Film Convert to color grade and color correct my doc.
The cameras included in this are a GoPro Hero 3, a Black Magic Pocket Cinema Camera, a GH4 (slow motion in camera) and a dji phantom quadcopter. FCP X is still frozen as we speak. I keep having to force quit and reopen in order to work on the project further. Does anybody know what might be causing FCP X to freeze?
Thank you all for your time.
Trey

I don't think memory is the cause of the freezes, If you had a memory leak, it would be likely that everything you did on the MP would just get progressively slower. Also, I recall someone else who was having some difficulties with FilmConvert and FCP X. It may have been this thread.
Russ

Final Cut pro, computer continually freezes?

After about a minute my computer freezes while in final cut pro, what can I do?

Please give complete system specs, computer, graphics card, drives, and how everything's connected.

Final cut pro often freezed

Hi,my name is Klaus. I am an german guy.
I dont know whats wrong, but often my final cut pro X (version 10.0.1) freezes. By simple actions.
I am an apple fan since many years and it hurts my soul that this program is such unstable.... I cant believe it!!! I am very worsed about it. It feels like an **** Freeware.
This is the ONLY programm, on my iMac, which make this nonsense,
My hardware is an iMac 27 inches with Lion 10.7.1, 2,8 GHz Core i7, 8GB RAM
What can I do? Have anyone an idea. I have clean any caches on my mac, shall i throw away the properylist of the program or what else?
Thanks a lot for helpful ideas!
Best regards Klaus

Sorry to hear you are having these problems, Klaus.
Have you tried trashing your preferences?
Faults like this can often be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
Download Digital Rebellion's Preference Manager (free, simple to use, and quite safe).
http://www.digitalrebellion.com/prefman/
With Pref Manager, you can backup the Prefs first, then if trashing makes no difference, you can restore all your settings.
If you trash them and don't restore them, you will need to go over your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then you can ditch the bad prefs and restore from your (Digital Rebellion) backup.
It's worth a try.
Andy

Final cut pro 10.1.4 freezes up

Similar Messages

Maybe you are looking for