Final cut pro 5.1 and final cut pro X

I've just installed final cut pro X. But I stlll have some projects I am working on in final cut pro 5.1. I don't seem to be able to continue to work on those projects, since they don't open anymore.
Can I not use my old final cut pro 5.1 anymore?
thanks

No it doesn't. When I want to open the 5.1 projects I put on my external hard disk, I get a message " failed to open" or something like that and the announcement that a rapport was sent to apple.
thanks

Similar Messages

  • Final Cut Pro 4.5 and Final Cut Express 3.0 - 5 minute captures then freeze

    Something I have found with Final Cut Pro 4.5 and Final Cut Express 3.0.
    After Updating to Tiger - 10.4.11 and Quicktime 7.4.1 - Both Pro 4.5 and Express 3.0 will not capture more then 5 minutes and 12 seconds. If you are having this issue the solution I used to fix both Pro and Express issues was an update on the software. Final Cut Pro 5 fixed the problem (or 6 if you can) and with Final Cut Express, version 3.5 fixed the issue but if you can go with FCX 4.
    Let me know if this helped or if you have found a different solution. Downgrading the os might help but that is too much of a pain and it's time to upgrade the software anyway.

    #29: Need AGP Graphics card
    Shane's Stock Answer #29 – Error: “Need AGP Graphics card”
    http://docs.info.apple.com/article.html?artnum=302667
    The Final Cut software is looking for a graphics card type that is required for that version of the software. FCP 4 and FCP 4.5 were released when AGP cards were the requirement. Attempting to open this on a Mac with a PCIe graphics card, such as an Intel Mac, will cause this error. FCP 4.5 is not supported on the Intel Macs. If you happen to have a PowerPC Quad processor Mac and get this error, you can try this hack:
    http://www.xlr8yourmac.com/feedback/finalcut_pro_on_oldmacs.html
    You can also press the "esc" key as you launch FCP. This enables FCP to open and run, but know that it might not work optimally.
    If that doesn’t work, or if you have an Intel Mac, you are going to have to upgrade to a supported version of FCP…and FCP 6, part of Final Cut Studio 2, is the latest version.
    Shane

  • Do I need Soundtrack Pro, Motion 2, and DVD Studio Pro 4?

    Do I need Soundtrack Pro, Motion 2, and DVD Studio Pro 4 to learn Final Cut Pro, or can I use the basic package and upgrade later?

    can I use the basic package and upgrade later?<<</div>
    What "basic package" are you referring to? FCP is only available as part of Final Cut Studio, which includes ALL of the apps you mention ... unless, of course, you purchase a used copy of FCP alone.
    -DH

  • SOUNDTRACK PRO, MOTION 2, AND DVD STUDIO PRO 4

    I want to learn Final Cut Pro. Do I need SOUNDTRACK PRO, MOTION 2, AND DVD STUDIO PRO 4 to learn the principles of editing, or can I get by with the basic package and upgrade later?

    http://discussions.apple.com/thread.jspa?threadID=1110772&tstart=0

  • Final Cut Server 1.x and Final Cut Pro 7

    Are there any compatibility issues with Final Cut Pro 7 (Final Cut Studio (2009) and Final Cut Server 1.x?

    FCSvr 1.5 has the ability to process FCP 7 project files and well as leverage ProRes Proxy Edit Proxy workflows.
    FCSvr 1.5 is recommended for FCP 7.
    I've heard about problem with FCSvr 1.1.1 and FCP 7.
    Are you experiencing anything in particular?
    Let me know
    Nicholas Stokes
    XPlatform Consulting

  • Premier pro crashing again and again, Premier pro crashing again and again

    Premier pro crashing again and again

    I am using 4k footages to edit in premiere pro CC 2014. Our footages frame size are of 3840x2160 and some of footages are 4096x2160. frame rates are 29.97, also as of now we are editing on 29.97, snap shot of sequence settings attached herewith for reference, but need output on 25fps. It would be a major help if you can help us regarding settings for 4k footage. as premiere pro CC 2014 getting crash again and again. 

  • User Contributed Tips, MacBook Pro (Original) Power and Batteries, MB Pro

    *The following User Contributed Tips are located in the MacBook Pro (Original) > Power and Batteries on a MacBook Pro forum:*
    None at this time.
    *The following related tips are located in other areas of Apple Discussions:*
    neuroanatomist - Apple notebook batteries – maintenance and troubleshooting
    http://discussions.apple.com/thread.jspa?threadID=1764220
    Publish date: Oct 23, 2008
    See Also User Tips Library

    Frani wrote:
    Hi Martin, thanks for your response, I'll have a good read through that article. Just to fire some more facts at you:
    My superdrive has been playing up intermittently for a while. Sometime it wont read the content on CDs / DVDs - usually copied / PC & Mac written discs, not commercial ones. However I haven't been trying to read and discs when the problems have happened.
    I upgraded my hard drive from a 320Gb to a 500Gb disc about 6 months ago and the switch was done by a competent Apple Authorized Service Provider. For a few weeks after the new drive had been installed there were a few occasions where the disc was making some noise, like a clicking noise. This would start and go on for a minute or so then seem to dye down and stop. It happened a total of about 10-15 times but when I reported this to the person that fitted my new hard drive he assured me he felt it was unlikely to cause a problem. he did say that if it went on to be an issue they would replace the drive of course. Like I said this was all done about 6 months ago and the clicking noises only happened a handful of times in the first month or so after the install and it did have one bad crash in this time but since then it has been fine.
    I just wondered if you thought either of the above might be a cause of the issue?
    Thanks
    Frani,
    I think the optical drive is not your problem, but it sounds like it needs replacement. There's a 75% chance it's your hard drive. Read the article on kernel panics. It takes time to diagnose the issue, but if you get TechTools and run a full diagnostic, you might find out if it's a hardware issue. But fix permissions and clean out your cache first, just in case it's a simple fix.

  • Grey screen on final burned DVD, used Compressor and DVD Studio Pro 4

    Trying to create a standard dvd from a 2 hour and 8 minute 720x480 mov file.  I have used compressor to create a mpeg2 as well as an ac3 audio file.  After looking at other posts, I feel that what i've done in compressor is ready to be imported into DVD Studio Pro.  I changed my preferences in DVD Studio Pro to support my mpeg2 and ac3 files coming in from compressor.  After I import, they import very quickly.  The playhead lets me scrub through the video fine, but when I go to the simulator, I get a grey screen.
    I'm trying to output this file onto a dual layered Standard DVD.  The fact that my video was originally an HD mp4, converted into .mov  should not matter once it's converted into an mpeg2, correct?  Mpeg2 is the standard DVD format.
    I've also messed with the markers in DVD Studio Pro because I've read that the Automatic settings for the "break layer point" are not that "Automatic" I've seen other posters saying to add markers in the gap where the DVD laser should switch from layer to layer, but still my output burned DVD and simulator remain a grey screen!. Please help, I've referred to many posts and I believe that I've done everything right except maybe one or two things. So Close! Help! Thanks!
    i

    messerw8 wrote:
    I changed my preferences in DVD Studio Pro to support my mpeg2 and ac3 files coming in from compressor. 
    What were the chamges you made?
    Does the m2v file that Compressor output play OK in QuickTime?
    Russ

  • Audigy 2 ZS Pro digital output and Windows XP Pro

    Recently "upgraded" my system to Windows XP Pro X64. My soundcard, an Audigy 2 ZS Pro, connects to my logitech 5. digital speakers via the front coaxial connector, no longer seems to output digital signal. The speakers indicate that there is no signal from the coaxial connection. I can hear sound from headphone through the analog output though.
    Before the upgrade, I had everything working, but I don't remember all the details I went through to get it to work.
    I have installed latest driver for Windows XP X64 from Creative, and I have modified the setting to bypass onboard decoding. Is there anything else I need to do? Online documentation talks about applications that I don't seem to have. Is there a X64-compatible application I need to run to get this to work? Thanks.
    George

    Okay Robert, I downloaded and installed your 6.25 drivers and they work fine. However, the Audigy 4 pro software, http://files.filefront.com/Pax+Audig.../fileinfo.html, does not install anything but drivers, no software applications. I looked on your board and could not find any definati've method for resolving this problem.
    Perhaps you or someone else who is familiar with installing the software apps would care to provide a detailed solution.

  • Logic Pro 9, Lion and Mbox 2 Pro Help please!

    I now have an iMac running Lion and I upgraded to Logic 9. How do I get Logic to recognize my Mbox 2 Pro (preferably without installing Pro Tools)?? Helllpp please!!? Do I need to download a driver to use the mbox, is it a setting thing??

    I found it!
    Go here   http://avid.custkb.com/avid/app/self...p?DocId=379411
    Click on   
    Mbox 2 USB Family Drivers (Mbox 2, Mbox 2 Micro, Mbox 2 Mini)
    and download and install the one below
    Mbox 2 Driver for Pro Tools 9.0 (Mac) [33.84 MB]
    My iMac did a weird restart but when my mac restarted all the lights on my mbox2 lit up.
    Works fine!

  • Russian mnemonic keyboard three letters missing: щ ч э - in Office 2013 in Windows 8 Pro or Standard and Windows 7 Pro or Standard

    The issue I believed is Windows specific. It only appears to work correctly on a Windows XP system. I can get the keys to work on Windows 7 or Windows 8 system.
    Russian mnemonic keyboard three letters missing: щ ч э
    I have a client that noticed this issue. He is a linguist and he uses the letters quite frequently. He further explained that...
    Russian mnemonic keyboard three letters missing: щ ч э
    On Windows 8 there is a mnemonic Russian keyboard.
    Unfortunately there are three letters which I can not find: щ, ч and э.
    These three letters exist in the standard Russian keyboard. They are at the following location (in the US  keyboard): o,x and '.
    I also did a test on a Windows 7 machine running office 2013 and still the letters are missing as described.
    The client explained without these three letters the mnemonic keyboard is useless
    Your help to address this issue is greatly appreciated.
    Nelson Ehis
    Nelson Ehis

    I think it is by design. You can use Preview to show the keyboard layout.
    Niki Han
    TechNet Community Support

  • C5580 and Avery Design Pro 4.0 and Avery Design Pro 5.4 Issue

    When I try to print multiple address labels nothing happens. I can print a single label fine, but if I have 4 different addresses on the project, nothing happens. The labels will print to another HP printer (Officejet 4215) just fine.
    The issue came up with v4.0, so I tried v5.4, thinking it was an older software issue, with no luck
    Thoughts??

    Thanks for replying. I checked permissions, they are all fine. I have read/write. The destination for encoding and image coding's location is set to same folder as the asset. I have played with different settings here and changed the path to my external hard drive and than reverted back to original setting \library\cache\dvd studio pro

  • Can i install Final cut studio 5 and DVD Studio Pro 4 on OSX lion

    Is any body who can help me on giving me some direction on how to install Final Cut Studio 5.1 and DVD Studio Pro 4 on my OSX Lion, if it's doable. Thanks

    The easiest way is to install Rosetta from a Mac OS X 10.6 DVD first.
    There's also a way of doing it via Terminal that's been posted here a couple of times. A search should bring that up.
    Edit: Found it... https://discussions.apple.com/message/21416133#21416133 read the second post.

  • Mac Pro Dual Core (pre 2009) - Leopard to Snow Leopard and Final Cut Pro 7

    I have a pre 2009 Mac Pro running Leopard and Final Cut Pro 6. My question is should I upgrade to Snow Leopard, and Final Cut Pro 7? Both, neither, just one of them... and in what order?
    I am afraid of some of the issues people have been discussing (one website even said with a non intel based system neither updates can be done, but I have Intel Xeon processor)
    Any help is highly appreciated. Thanks kindly

    Your macpro will run Snow Leopard and FCut 7 just fine. There are plenty of "whats new in Final Cut Pro" tutorials out there to research and learn whether the new things are useful to you. Snow Leopard...plenty have had issues with it. As always, it's best to have a full mirror backup before you update to Snow Leopard so if you do have problems you can go back easily. I'd definitely move to 10.5.8 if not SLeopard. I have a PCIe card that won't work with SL so I'm holding off till I install a new card. There are still some incompatibilties known so you may want to check Apple's list.

  • Rebates : partial settlement and finall settlement in same order type

    Hello,
    I have to activate manual payment procedure for rebates
    But when I put the order type which is the same than the one specified in the final settlement, i got a message VK340 telling me this document type is not allowed for partial rebates.
    I've compared this order type to another one permitted by the systele, i can see no difference.
    In both cases we are speaking about credit note so it could be possible ?
    Thank for your help,

    Hi
    ya of course , Generally we use Order type R4 for Partial settlement amd R3 for Final settlement.Eventually Credit note and final bills r generated consequently.
    So,error is right,
    Plz Go to T.Coed Agreement type VB(2 and  brush up the concept.
    Thanks
    mk
    Note U can even make partial payment Via VBO2.Which give u credit note against that.

Maybe you are looking for

  • PHOTOSHOP CS4 AND ILLUSTRATOR CS4 CRASH WORKAROUND

    hey guys i find something interesting!!!! (and this is an obvious sign that adobe didn't test the software but only open and close it while counting money eheh) first of all the clean CS4 install won't work so don't do it! 11.0.0 and 11.0.1 it's the

  • Page cannot be dispalyed message

    i installed tomcat and created a simple servlet named servlet1. i created a directory named servlet1 and put servlet1.class under servlet1/WEB-INF/classes. i also put web.xml under WEB-INF. in web.xml i wrote- <?xml version="1.0" encoding="UTF-8"?> <

  • Evaluation path in CRM - RH_STRUC_GET not working !!

    Hi all, I created a new evaluation path in CRM 4.0 to determine the business partners in an organizational unit. If I test it in PPSS it works absolutely perfect, however I have to use it in an ABAP and there I found out that FM RH_STRUC_GET doesn't

  • How to add customization logic around lockPref() when using it in .cfg file

    I wanted a way to apply the lockPref only when certain conditions are met and also add some customization logic around the lockPref functionality. How can I acheive this?. Any sample script to acheive this is greatly appreciated. == User Agent == Moz

  • I can't delete songs from my phone.

    I can't delete old songs from my phone. I restored my phone and it brought 100 old songs on my phone, each song has a download button next to it so I can download each song individually and when I try to slide it to the right to delete, it the same d