Final Cut Pro 5 - Unrendered

hi there,
im bit of a 'newbie' on this program, and I am finding it quite difficult.
I am creating a video, and when I make a sequence with numerous clips and try to play in the Canvas, it has 'UNRENDERED' in big writing and a blue picture on the video screen. I have checked the manual and I am a bit stuck. Would be great if anyone could help
thanks

There are several reasons a file can be unrendered.
1. you are using the wrong sequence settings ie it is an HDV project and you are using an easy set up for DV. Changing the easy setup (under final cut pro drop down menu) and create a new sequence usually sorts this out. Copy and past the cut you have done into this new sequence.
2. If you have effects on the time line (which you haven't got to yet) they may need to be rendered. Rendering is done under the sequence drop down menu, render selection, not the effects drop down menu (as I kept looking at).
3. There is a button called RT on the left hand top side of the sequence window. You can change the quality of play back so less rendering is needed and the number of frames displayed.
but it will be the sequence settings, it takes a bit to get used to them but once you have it all in your head then you don't look back.
FYI always list the format that you are working with (PALdv50i etc) and the settings of the sequence (right click on the sequence in the folder and click on the settings label) and you should also list your equipment - camera/input device/cards/computer and ram etc or the old boys get very miffed.
2x 2.66 GHz Dual-Core Intel Mac OS X (10.4.9) 2gb Ram, FCP 5.1, Sony A1p

Similar Messages

How do you crete an "unrendered look" in Final Cut Pro 7?

Hi guys,
Does anybody know how to crete an "unrendered look" in Final Cut Pro 7?
What video filter do you apply?
I'm trying to create a security Camera Look and I can't find the right filter.
Any help ?
Thanks.

Depending on the look you are looking for there really isn't one filter to do this it is more likely a combination of things.
One approach:
Play with the color correction filters and composite modes with a duplicate clip on the layer above.
and if you want noise try this:
http://www.geniusdv.com/news_and_tutorials/2009/05/using_the_noise_generator_in_ final_cut_pro.php

Editing .AVI files in Final Cut Pro 5

I am trying to edit .AVI files on Final Cut Pro 5 on a volunteer basis.
I have converted the files to .MOV files with Quicktime Player.
I am able to import one of these files into Final Cut Pro 5, and can even watch it in the viewer.
But when I place it in the Sequence tab to edit it, I get a screen that says "UNRENDERED" for the whole clip.
Based on past experience, the video would be harder to edit in a rendered state.
Any advice on how to edit .AVI files would be much appreciated.

AVI files are quite similar to some .mov files, but the devil is in the details (so to speak.)
You don't give any particulars, so I'm going to assume you're working with standard definition NTSC video. Additionally, I'll assume that your system is PowerPC Mac since only FCP 5.1 and higher supports Intel processors.
FCP uses sequence presets that spell out the parameters for the timeline. If a clip is dissimilar or acquires enough filters to be functionally dissimilar,the timeline will become red for that portion of the timeline. The same is true for the audio portion of the clip.
The terms "QuickTime" and ".mov" (and probably ".AVI" for that matter) are kicked around as if they are specific but in fact they are quite vague. It's like saying you have a Ford; without any additional info like model and year, it's hard to get down to cases.
Use Compressor or QuickTime Pro to convert your footage to DV/DVCPRO-NTSC (if it's SD and you're in North America) and make sure the audio is converted to 48KHz/16-bit. This should match the NTSC presets and your timeline should a "cool" color (dark blue to light green) and playback nicely.
Depending on the amount of processor power your system has, you may be able to play back clips with filters or even two or more layers of video without rendering. To be frank, don't count on it because someone has had well over 5 years to upgrade the system and hasn't so it may be "peaked out" already. You can usually step through the timeline using the arrow keys or by rendering short segments if you practice good "timeline hygiene" i.e., keep the timeline as clean as possible, don't strew clips over many video layers and let them stack up.
That should get you going, I strongly recommend you take a little time to read the help docs/// they actually can help.
Good luck!

Final Cut Pro - Formats...

Hi,
I recently bought a camera, which I am still trying to figure out. It's a Sony HD Handycam - HDR-XR520.
First of all, importing the videos from the camera is a mess.. I use iMovie, where I click import from camera and just import videos from there. The videos are saved in the iMovie library (also accessible in Finder) and are in mov. format.
When I try to import these videos (mov. format) to Final Cut Pro, in order to edit them, I am not able to do so. I DO import them but then I am unable to work with them at all... I cannot even get a simple preview of the videos, it is either black or says in blue Unrendered.
What can I do? How can I change the format of the videos in the first place? How can I import the videos from the camera the easiest?
And is my Final Cut Pro settings, set up correctly? I might have changed something when I first got it a few weeks ago.
http://img521.imageshack.us/img521/3032/picture1kb.png
Thanks so much.

This guy has similar questions and then he said that it was really easy hooking up his same camera to FCP...
http://discussions.apple.com/thread.jspa?messageID=11151002&#11151002
I have no idea how..
I have not been able to edit ANY format on FCP so far.. I have no problem importing, editing and exporting with iMovie 09, it's extremely simple but I can't do anything on FCP. I'm pretty sure it's the video settings that's causing the trouble.
I cannot do Log and Capture either... wrong settings

Mini-Dvi to Video out from Final Cut Pro working

Thanx Everybody for posting reply for my post regarding running video out to external TV from Final Cut Pro in MacBook.
It's working fine.

@ Studio X : The files were originally created with Final Cut Pro, rendered out to QuickTime, then are being played back with Final Cut Pro. The file that has the most noticable studdering is a 60-minute timeline sequence in Final Cut. All files are being stored and played back from the Mac Mini's internal hard drive. Everything was originally shot on DV and formatted for a 4:3 aspect ratio.
@ Shane Ross : Are there any settings in the MacOS or FCP where I can improve the HDMI video signal? Or do you know of / have any experience with Firewire to HDMI converters? Unfortunately, my new signal path relies on HDMI from the video playback.
My current setup uses the Firewire output, which is then converted to composite video & analog audio using a pair of ageing DV tape decks. That setup is becoming troublesome due to age.

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds.

How to use Final Cut Pro with multiple user accounts?

Hi,
I want to use Final Cut Pro on a clean user account. How do I set it up? How can I access my old FCP library and still work on it from multiple users?
Also, I want my DropBox account to back-up my media. Any tips?

I use external drives as backup. But I don't trust them. And in case of fire or what ever...It is of no use...
But I agree on your comment about DropBox. It would have been the perfect solution though.
What else is there?
I have a 2TB HD but these projects are huge and still growing - so I have to move my projects to several external drives. So maybe I should just work directly from external drives and skip the partition of the computers main drive? I am thinking of the disadvantage of reducing the total storage of the disk.

What's wrong with my Final Cut Pro 7.03?

What's wrong with my Final Cut Pro 7.03?
I have just started up a new project.
Every time I try to ad a clip in top of each other a "general error" shows up. The sequence viewer turned red and it displays that I have to close and reopen the window to restore.
The only "new thing" I do - is the use/brand of camera.
Now I use the canon D5 mark 3 for my project (before D5 mark 2)
What's wrong??? Do I need to update my Final Cut Pro 7.0.3 And how do I do this???
Final Cut Pro 7, Mac OS X (10.6.8)

Did you use Log & Import? Or did you at least convert the D5 files before importing? FCP doesn't work with those files natively.
-DH

How to I get a folder to open up in Final Cut Pro version 6 thats off my desktop?

How do I get a folder to open up in Final Cut Pro version 6. I'm on a MAC OS X Version 10.6.8. The movie folders I imported on my desktop from a Lacie Rugged Triple external hard drive. When I try to import the folder a pop up comes up that says, "ERROR: No translatin templates matching the selected XML file were found. Unable to import this file." When I try and drag the folder into Final Cut a pop up comes up that reads "Please choose a translation document file". What should I do or what am I not doing?
Cliff

YYou should ask this question on the Final Cut Studio forum.

How do I capture HDV in Final Cut Pro 6.0.6 from a Sony HDR-CX360?

Hi. I recently upgraded to a Sony HDR-CX360 Camera. I've been importing off of Firewire with my older cameras. Now I face only being able to import with USB. It is not recognizing the camera. How do I import with this kind of camera and Final Cut Pro 6.0.6.? It works fine with iMovie.

Hi,
There are a couple of things I would do in your position .. first off make sure the camera is turned on and connected BEFORE I start FCP. another would be to run up system profiler and have a look in FireWire - and see (obviously with the camera connected) is it listed in there .. If not in effect the MAC is not seeing the camera and Failing that if it is a six pin on the camera connect to a six pin port .. I had issues with a Camera (Canon XHA1s) which the MAC Pro FireWire (8 pin) would not list the camera until I installed an two port 6 pin FireWire card .. It works every time now. Hope you get it sorted ..
Jim

Can not get Final Cut pro to capture HD footage from Canon HV10

Ive had soo much trouble with no success, in trying to get footage from my HD camera into Fina cut Pro HD 4.5. I can get normal dv footage when i cahnge the setting s on the camera, and Final cut pro, but HD is not been possible so far.If any one can inform me of anything, is it possible at all to capture from my camera in HD, do i need Final Cut Pro 5? Do i need pluggins? Anything!! I want to capture HD quality!
Powerbook G4 Mac OS X (10.4.9) 1.5GB MEMORY

You need to list the camera you are using, the settings you shot on and the settings on your sequence (easy set up etc)

Export Final Cut Pro 7 project to open in FCP 6?

Is there any way to open a final cut pro 7 project in final cut 6?
We have a bunch of older Macs that won't run FCP7, but we use for training but our hope was to upgrade the newer machines to the new Final Cut Studio, but it would be great if we could create something on the newer machines, that we could transfer to the older ones.
We tried XML export, but it didn't look like it included filters and such, so we are wondering if there is any other way?
Regards,
Karl M. Moberg

Nope. no other way.
Shane

How do I connect my DSLR camera to Final Cut Pro's Camera Import?

I recently purchased a Canon EOS Rebel T3i. I am trying to get it to record directly into Final Cut Pro, but I can't figure out how.
It does not have a FireWire port, just a USB and HDMI output. I'm thinking it's going to need to output to the HDMI port and have some sort of interface between the Mac and the HDMI cable, but I would prefer to record directly using the USB cable.
I was wondering if anyone knows how to do this and/or has done it before. Any help is greatly appreciated.
Thanks!
Zane

I haven't got a DSLR but I think they probably import like most AVCHD camcorders.
You connect it with a USB cable and switch it on.
You then set FCP X to import the video clips.

Final Cut Pro 6 on Mac OS Snow Leopard installation problem HELP!!!

After 2 - 3 hours of installing all 10 FCS 2.0 discs and Software Updates, I can't seem to launch Final Cut Pro 6.0.6. I get *"...software maybe damaged or not installed.."* So I removed all of them and only custom-installed Final Cut Pro 6.0.6. It works with no problem!!! Then I custom-installed Soundtrack, Motion, DVD Studio Pro etc..., I can't launch Final Cut Pro 6.0.6. again! What the **** is going on? I get that "damaged" warning and Final Cut Pro icon is replaced by missing application icon.
My Mac Pro also has _Pro Tools 8 LE_ with _003 Mixer Rack connect to USB_. That's it. No other application. You think this is maybe causing the problem?
Anyone having similar problem?

https://discussions.apple.com/docs/DOC-2494
Carbon Copy Cloner is pretty simple to use. If you have any questions, post back or read the documentation. As I said in the user tip, test your clone after you make it to be sure it is bootable and your apps work.

Comparing video quality of AVCHD BluRay discs using Final Cut Pro Share vs Compressor

Up front, I will admit to being a newbie when it comes to using Final Cut Studio 3 and would appreciate some feedback from the Apple forum experts.
I have spent a lot of time trying to determine how to achieve an optimum group of Compressor 3.5.2 settings so that the playback video quality of an AVCHD BluRay disc is equal to or better than one created by using the simpler auto settings of FCPro Share, version 7.0.2.
When using Compressor’s auto/default maximum settings, I experienced the same error message reported in:
Error MessageDuring Creation of Blu-ray Disc in FCP and Compressor 3.5
https://discussions.apple.com/message/12073794#12073794
I have since made some Compressor AVCHD Discs with smaller bit rate settings and compared video quality with a single FCP Share AVCHD disc. Both seem to be equal in providing a very good video when viewed on my new Panasonic DMP BDT 310 BluRay player. However, the Compressor AVCHD discs show some motion artifacts not present with the FCPro Share version, especially when scrolling text or when objects are moving through the field of view, and visible artifacts are seen from a stationary chain link fence and other lattice work in the background of the video sample.
My sample video used for the comparisons between Compressor and FCP Share discs is a 21 minute duration home movie, originally captured from a mini DV, Canon HV30 1080i camcorder using ProRes HQ encoding(1440x1080), and dragged into FC Pro 7.0.2 timeline where 10 chapter markers have been inserted.
To create an AVCHD disc using FCPro Share, Markers are used to set the IN and OUT points, Select IN to OUT from the timeline, pull down File Menu Share, Select Create BluRay from options in pop out Share pane, and designate output device along with picture files for Background, Logo, and Title options. When these are completed, click on Export. My 21-minute video required almost two hours for encoding including about 10 minutes for burning. This accomplished on an iMac 3.06 GHz Intel Core 2 Duo.
To prepare this same 21-minute video for use with Compressor, I again Select IN to Out from the FCPro timeline, but this time use File Export as a QuickTime Self Contained movie including Chapter markers. Then Open Compressor, choose Create BluRay from Template pane, right click on the down arrow in the Batch window and load the QT self contained movie file. From there I went to the Inspector window and tried various combinations of bit rate settings along with Frame Encoder options such as Better or Best motion parameter controls.
I have tried the following combinations of Bit rate settings along with varying Frame Encoder controls and burned an AVCHD disc for each example:
Example A
Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings OFF. Approximately 4 hours to encode although the time remaining estimator indicated a larger value of ~7 hours; not an accurate estimator at all.
Example B
Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motionadaptive)” settings. Approximately 4 hours to encode, not the 13 hours that were estimated.
Conclusion: Comparing A & B Compressor versions, Disc B showed some improvements in reducing motion artifacts over Disc A.
Example C
Compressor set to 13 Mbps Average and 15 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. DeInterlace was checked. Unknown hours to encode; about 8 hours done overnight..
Conclusion: Disc C showed some minor improvements reducing motion artifacts over Disc B
Example D
Compressor Auto settings,i.e., 15 Mbps Average and 17 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. Approximately 12 hours to encode, done overnight. Inserted disc next morning after the overnight encoding was completed, and a few minutes later an error message pane appeared that the maximum bit rate had been exceeded. This message was consistent with the Apple posted thread referenced above. Unfortunately the long overnight encoding was wasted.
It seemed to me that the best Compressor settings for suppressing the motion artifacts were displayed by the disc burned in Example C, i.e., 13/15 Ave/Max Mbps with“Better” Motion settings in the Frame Encoder.
However, when this disc was compared to the AVCHD Disc burned using the FCPro Share, the latter still seemed much better. I do not know what the auto bit rate values are as set in FC Pro, but for me, the quality is quite good AND the motion artifacts are significantly reduced, especially evident with the scrolling text.
Sorry about this long post, but I thought the detail would be necessary for the experts, and maybe helpful to others trying to get started in this BluRay arena. Did I misuse Compressor? I think the sample video exported as a self contained QT movie was the right thing to do? Not sure where I went wrong.
Thanks in advance for Feedback and Recommendations. For now, I’m going to stay with the simpler process using Final Cut Pro Share function.
BoBo

Thank You, Brad, for responding; glad to hear I'm not the only one having similar Compressor issues.
You may have hit on something. Perhaps Compressor's use of H.264 encoding was the reason for my motion artifacts? And perhaps Final Cut Pro Share retains the 1440x1080 quality as it burns the AVCHD BluRay disc?
I had Toast 10 for less than 30 days a couple of years ago, and was lucky to get a refund.
What version of Toast do you have? Wondering if new Toast 11 has improved previous bugs, especially upgrading its Chapter text, pictures, music. I would go back to Toast if it came close to mirroring DVD Studio Pro, or even iDVD capabilities.
Thanks,
BoBo

Final Cut Pro 5 - Unrendered

Similar Messages

Maybe you are looking for