Final Cut Pro 7 Log and Capture Frame Sizes

When importing from a Roland VR-5 mixer into Final Cut Pro 7, we get black border/bars on the left and right sides of the preview. We didn't think anything of it, that it might have just been the preview window. These bars are recorded though, it's as if we're not recording the full frame size coming out of our mixer. We went into the settings on the VR-5 and everything was configured to be 720x480, and that the settings in FCP matched. The image still gets cut off. Any ideas?

Some background:
720x480 is a non-square format. It can either be the equal of 640 x 480 (4:3) or 954 x 480 (16:9) depending on what you tell your editing software the incoming stream will be.
If you told FCP the incoming stream is DV/NTSC 4:3 and you are getting a pillarboxed image, FCP is thinking you are sending it a 16:9 version and is filling the the sides to keep the aspect ratio correct.
It would help to know a whole lot more about settings within FCP and what your mixer is putting out.
x

Similar Messages

Final Cut crash on 'Log and Capture' selection

Hi guys,
So I have a BlackMagic Decklink Extreme card installed, and hooked up to a Sony J-3 DigiBeta Deck.
When I attempt to 'log and capture' final cut crashes before the capture window pops up. This happens on all setup's (10-bit/8-bit/JPEG) when I have device control turned on (RS-422). If I turn off device control, the capture window opens normally, and I can do a capture now, which is no good to me for logging purposes, or doing offline edits.
So, my question: Is the device control crashing Final Cut due to the fact that Im using an intel mac with Final Cut 5.0.4? Can anyone confirm this for me? Or is there something I can do to fix this? Has anyone experienced this problem?
Device control works outside Final Cut, in BlackMagic Deck Control, so I know its not a card issue.
Im still waiting on a copy of Final Cut 2, its in the pipelines... but in the meantime if there is a quickfix to this, help would be much appreciated, as Final Cut 5.0.4 is otherwise extremely stable for me...
Thanks,

Some background:
720x480 is a non-square format. It can either be the equal of 640 x 480 (4:3) or 954 x 480 (16:9) depending on what you tell your editing software the incoming stream will be.
If you told FCP the incoming stream is DV/NTSC 4:3 and you are getting a pillarboxed image, FCP is thinking you are sending it a 16:9 version and is filling the the sides to keep the aspect ratio correct.
It would help to know a whole lot more about settings within FCP and what your mixer is putting out.
x

Mavericks and Final Cut Pro 7 - Log and Transfer crashes

Hi all. I (perhaps unintelligently) upgraded to OSX Mavericks on my Mac Pro while working on a project in Final Cut Pro 7. What is good news is that FCP 7 still works for the most part. The bad news is that Log and Transfer crashes.
I have a Panasonic P2 camera and I dump video via FireWire 800. When I first click on the Log and Transfer button, nothing happens. When I click on it again, the Log and Transfer window opens, but then FCP 7 crashes.
Is there any way to get video from my P2 card into the project without Log and Transfer?
Also, would any of these options work?
Trash preferences (working to figure out how to do that on Mavericks)
Worst case, re-format and re-install Lion (Don't have much time to do that)
Please let me know if you have a work around or a fix for this. I need to have this solved TODAY.
I appreciate your help in advance.

I am having the same issue on my iMac that was udated to Mavericks a while back and apparently I haven't tried to log and transfer anything since.
The error comes up everytime I have a my Sandisk High Speed Card in my lexar Fire Wire 800 card reader. The Log and Transfer screen pops up and it starts adding the clips and instead of populating the screen, it crashes. Mine also says FCP quit while using the canonIHL plug in, here's a screen shot of the indication.
I agree, this needs to be resolved ASAP. I'm dead in the water. The only thing I can do is transfer the raw files into a folder somewhere, then import the clips, but then to have them as ProRes files I guess I would have to use compressor before hand. I've done it before, but it never runs as smoothly without it being natively imported.

Final Cut Pro 4.5 and Final Cut Express 3.0 - 5 minute captures then freeze

Something I have found with Final Cut Pro 4.5 and Final Cut Express 3.0.
After Updating to Tiger - 10.4.11 and Quicktime 7.4.1 - Both Pro 4.5 and Express 3.0 will not capture more then 5 minutes and 12 seconds. If you are having this issue the solution I used to fix both Pro and Express issues was an update on the software. Final Cut Pro 5 fixed the problem (or 6 if you can) and with Final Cut Express, version 3.5 fixed the issue but if you can go with FCX 4.
Let me know if this helped or if you have found a different solution. Downgrading the os might help but that is too much of a pain and it's time to upgrade the software anyway.

#29: Need AGP Graphics card
Shane's Stock Answer #29 – Error: “Need AGP Graphics card”
http://docs.info.apple.com/article.html?artnum=302667
The Final Cut software is looking for a graphics card type that is required for that version of the software. FCP 4 and FCP 4.5 were released when AGP cards were the requirement. Attempting to open this on a Mac with a PCIe graphics card, such as an Intel Mac, will cause this error. FCP 4.5 is not supported on the Intel Macs. If you happen to have a PowerPC Quad processor Mac and get this error, you can try this hack:
http://www.xlr8yourmac.com/feedback/finalcut_pro_on_oldmacs.html
You can also press the "esc" key as you launch FCP. This enables FCP to open and run, but know that it might not work optimally.
If that doesn’t work, or if you have an Intel Mac, you are going to have to upgrade to a supported version of FCP…and FCP 6, part of Final Cut Studio 2, is the latest version.
Shane

Final Cut pro doesn't play the frames

My final cut pro doesn't play the frames in the application.
The whole time it works great but at ones this happend.

Couple of things to check and try.
1) In Viewer Display options check to see whether Better Performance is checked in the Quality section. If not, check it and that should help you set real time playback with a slight reduction in quality in the Viewer. However, it will not have any affect on your project.
2) If that doesn't work, consider generating Proxy files by eight clicking clips >Transcode Media. There is also a setting in Viewer Display Options to use Proxy in editing your project. Before you export the finished project, remember to change that setting back to Original/Optimized.
3) If that doesn't work, download a speed test and check the throughput of your media drive. It should be a separate drive from your start up disk and should be connected by Thunderbolt (fastest) USN3 (next fastest) or Firewire 800.
Russ

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds.

HT4722 Can Final Cut Pro be purchased and downloaded more than once?

Can final cut pro be purchased and downloaded on more than one computer?

This is an excerpt from the FCPX license, available here.
http://images.apple.com/legal/sla/docs/FinalCutPro.pdf
2. Permitted License Uses and Restrictions.
A. Mac App Store License. Subject to the terms and conditions of this License and as permitted by the Mac App Store Product Usage Rules set forth in the App Store Terms and Conditions (http:// www.apple.com/legal/itunes/ww/) (“Usage Rules”), you are granted a limited, non-transferable, non- exclusive license:
to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software directly on each Apple-branded computer running OS X (“Mac Computer”) that you own or control; and
(ii) if you are a commercial enterprise or educational institution, to download, install, use and run one (1) copy of the Apple Software for use either: (a) by a single individual on each of the Mac Computer(s) that you own or control, or (b) by multiple individuals on a single shared Mac
Computer that you own or control. For example, a single employee may use the Apple Software on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use the Apple Software on a single Mac Computer located at a resource center or library.

I have Final cut Pro HD sequence and I need to burn this on a DVD

I have Final cut Pro HD sequence and I need to burn this on a DVD, my sequence lasts 1 hr and 33 minutes. What are my options? Is it better to export as a Quick Time movie or using the compressor? I'm new to the compressor just learning, please help.

Select your sequence in the browser window, go to the File menu and choose Export Using Compressor.
When compressor opens, choose the DVD best quality settings, 120 minutes.
For audio and video both, choose both the m2v video and the AC3 audio. (Dolby Professional)
Choose a destination for your files, and hit submit.
When it's finished, import these files into your DVD SP project, and make your DVD.
Be sure to choose the 16:9 anamorphic settings.

I have a project in Final cut pro 10.5 and the spinning icon appears with every action and each action takes up to 30 seconds to respond to?

I have a project in Final cut pro 10.5 and every action takes up to 30 seconds for the program to respond . The spinning icon stays up during this time?

Are you using Mavericks. If so you should update FCPX

Final Cut Pro 4.5 and Quicktime 7 compatibility issues. Error 39!

I see some people saying Quicktime 7 is not compatible with Final Cut 4.5 and some saying it is.
I upgraded to 10.3.9 and then Quicktime 7 and I started getting error 39 at this one spot in my timeline and then crashing if I tried to play just a few seconds ahead of that spot. I tried trashing the prefs but that didn't do any good. The individual files play fine outside the timeline so it isn't corrupt media. I tried rerendering the effects that are at that point but that didn't help. I tried copying the entire timeline to a new sequence and that didn't help.
The strange thing was that when I took the part of the movie that was having trouble and deleted it from the timeline it still got error 39 when just playing over the empty timeline where the media used to be! This led me to realize that the problem lay in some Quicktime audio effects I had about a second in front ot the error 39 spot. I took off the effects from that audio but it didn't help. Then I deleted that audio from the timeline and just pasted it back in from the original clip and then it finally got to working.
Now I know nothing about the software, but I thought there might be some connection between the fact that I had effects that FCP labels as "quicktime effects" on there from my days in Quicktime 6.5, then upgraded to Q7, and perhaps those old effects don't work in Q7? I don't know.
So, my immediate problem is solved but I thought this experience may be of use to someone else. And perhaps some compatibility issues can be brought to light.

I would assume the Software Update program has sufficient logic within it to detect that my friend is running Final Cut Pro 4.0 and it would therefore be disastrous to install QuickTime 7.3, thus removing QuickTime 7.3 from her list of suggested updates. Would someone at Apple please fix this?
Sorry, but Quicktime is a component for SO MANY things, not just FCP. Sorry, but the OS doesn't detect that older versions of software are on there and won't be compatible...this is where you need to have a little knowledge. And sorry, but you need to have a little knowledge. If things are working, DO NOT UPGRADE unless it has been tested and cleared. In the case of FCP 4...it has not.
Rule of thumb...if you use older software, you have to stick to older versions of the OS and components that that software relies on.
How many things were broken with Vista? So many that the HUGE community let out a cry and now XP is available again configured on machines or as a stand alone buy. And no, Vista didn't warn that certain applications wouldn't work either.
You gotta research and find out. This place here...this forum...is a FANTASTIC place to find stuff like this out.
BTW...Apple doesn't read these forums, only us users. Gotta submit feedback here:
http://www.apple.com/feedback/finalcutpro.html
Shane

Final Cut Pro 5.1 and a Macbook

I am looking to buy Final Cut Studio. I was hoping to get some feedback on this question: Must you have a MacbookPro to run Final Cut Pro 5.1 (and the rest of Final Cut Studio), or will it run on a Macbbok without any problems? I would really like to hear from People who has actually have run Final Cut Pro 5.1 on a Macbook and what their experiences were. I know the Macbook does not have the ATI Mobilty Radeon X1600 graphics card like the MacBookPro does. So was that an issue for anyone?
Other OS

Here's Apple's official position: http://docs.info.apple.com/article.html?artnum=303782
However, there are several people running most of the Studio Apps successfully ... except possibly Motion. With FCS2, chances are Color won't run either. You should be able to search here for similar postings; this topic comes up frequently.
-DH

Provide Feedback for the Final Cut Pro User Manual and Onscreen Help Here

The Apple documentation team for Final Cut Pro would like to know what you think about the Final Cut Pro 5 Help documentation (available in the Help menu):
• How often do you use the Final Cut Pro Help? Under what circumstances do you use it most?
• How do you find what you're looking for in Final Cut Pro Help? For example: table of contents, index, skimming, PDF links, PDF search?
• What do you like about it most?
• What is missing?
• Are there any particular examples of manuals or documentation that you consider to be good models for the Final Cut Pro manual and onscreen help?
• By what method do you usually learn a new application? For example: provided tutorials and manuals, third-party tutorials or books, training classes?
• Did you use the Final Cut Pro Getting Started book to familiarize yourself with Final Cut Pro? If so, do you feel the book provided a good introduction to the application?
• What do you think is the most difficult feature/concept to grasp in Final Cut Pro?
• What's the most frustrating experience you've had with the Final Cut Pro documentation?
• Do you prefer electronic or print documentation?
• Are there any other delivery methods or media you think we should explore?
• What size computer display do you typically use to view the onscreen help? For example: 15-inch, 17-inch, 20-inch, 23-inch, or 30-inch?
• What resolution is the computer display set to when you view onscreen help? For example: 1024 x 768, 1280 x 854, or 1920 x 1200 pixels?
• Do you use multiple computer displays?

• How often do you use the Final Cut Pro Help? Under
what circumstances do you use it most?
Often, I much prefer that to the Manual, though the Search function is very clunky. Search for Nest for example and you'll get about 50 listings for the table of contents and indexes alone, when all I would really want is the explanation of how to actually create a Nest.
• How do you find what you're looking for in Final
Cut Pro Help? For example: table of contents, index,
skimming, PDF links, PDF search?
Search.
• What do you like about it most?
Ease of use to get through the manual instead of going through the books themselves.
• What is missing?
Better organization of the search results. Again, if I search Nests, make the first set of results the answers that actually show me how to use the tool, not the 50 times it appears in the table of contents and indexes.
• Are there any particular examples of manuals or
documentation that you consider to be good models for
the Final Cut Pro manual and onscreen help?
Honestly, Apple's is the best I've seen for the moment.
• By what method do you usually learn a new
application? For example: provided tutorials and
manuals, third-party tutorials or books, training
classes?
Just crack the app open and start. Use websites like the Creative Cow for more input and ideas.
• Did you use the Final Cut Pro Getting Started book
to familiarize yourself with Final Cut Pro? If so, do
you feel the book provided a good introduction to the
application?
I thought the Tutorial that came with my first copy of FCP (Version 2.0) was outstanding at introducing me to the interface and how FCP operated. I came from Media 100 and in particular, the Log and Capture operation was completely different than what I was used to.
• What do you think is the most difficult
feature/concept to grasp in Final Cut Pro?
Media Manager. Not sure why it has to be so convoluted. Media 100 was too easy with this one. Select the Sequence to be up-rez'd, set your new format and capture.
• What's the most frustrating experience you've had
with the Final Cut Pro documentation?
Search results using the Help menu.
• Do you prefer electronic or print documentation?
Actually both. If the electronic search gets too frustrating, I'll pull the print manual out to find what I really need.
• Are there any other delivery methods or media you
think we should explore?
Not really. Internet based help is always nice, but I don't keep my FCP workstations connected to the web so that would actually create a bigger hassle for us.
• What size computer display do you typically use to
view the onscreen help? For example: 15-inch,
17-inch, 20-inch, 23-inch, or 30-inch?
17" Powerbook display, 17" 20" and 23" Apple Displays and a 17" Sony Display.
• What resolution is the computer display set to when
you view onscreen help? For example: 1024 x 768, 1280
x 854, or 1920 x 1200 pixels?
Highest resolution for that monitor.
• Do you use multiple computer displays?
Yes. 23 & 17" on one G5. 20 & 17" on the 2nd G5. 17" Powerbook
Powerbook G4 17, G5 Dual 2.0, G5 Dual 2.0 Mac OS X (10.4.5) AJA Kona 2 on both G5's, Fibre Channel and SATA arrays in use.

Final Cut Pro-ADVC110 set up capture 16:9

I was wondering if anyone new how to properly set up the ADVC110 to be recognized by Final Cut Pro.
And after recognized how would I initiate it to record/capture in 16:9.
Thanks in advance any information/suggestions is appreciated.

Ok i've set up the ADVC110 for NTSC and I've set it up to "Non-Controllable Device" for device control. Since i want 16:9 widescreen to be my final product what would I have to do to get those results. I'm looking to get 16:9 result so when I upload to youtube I won't get too much of the black bars.
For Capture/Input can I set it to DV NTSC 48 kHz Anamorphic. *The options given for capture/input can be seen here: http://i29.tinypic.com/30tl4px.png *
-Thanks

I'm running OS X, but I can't run Final Cut Pro 1.0 and appropriate upgrade

I recently purchased a Macbook with OS 10.4.6 on it. I have Final Cut Pro 3, but I can only install it via FCP1 and upgrade to FCP2 and finally to FCP3. However, when I try to install 1.0, it says that this system cannot support it. I can't seem to figure out how to run Classic mode either.
So, my question is, what are my options to run this software? (I really do not want to purchase the newest software.) Also, I know someone who has FCP3 full version (not an upgrade); would it be possible to install this software and use one of the serial numbers from one of my other software disks? Any help would be great.
Thanks!

FCE is more limited but depending on your needs it might be fine
check out http://www.apple.com/finalcut
why do you feel you need to download an upgrade
after FCP 4 (3-4 years ago) you no longer needed an older version installed just the serial number as they discovered the problem that you are running into now
DAVE

Final cut pro 5.1 and photoshop cs2 w. macbook

it seems that the reviews have been up and down with the usage of these programs on the macbook--considering the graphics card in this puppy.
i currently have the old school powerbook 15" 867 and i am considering about getting into the macbook 2.0g (with 2gig ram)--my only concern is that i use those two programs an awful lot--pretty much the only thing i use that makes my computer really work. considering that i am a student on a tight budget, and that i do have G5 machines at school to do my heavy duty editing, does anyone know if there has been any more updated reviews about these programs and the macbook? if anything, it should definitely be better than my old school powerbook right? it has been quite awhile since i been in the hunt for a new computer. any help would be greatly appreciated!
powerbook 867 Mac OS X (10.4.6)

This is my simple advice, buy the correct tool for your software. Final Cut Pro is NOT supported by Apple on the MacBook. It supported on the MacBook Pro. You weren't using an iBook before you had a PowerBook, why would you get a MacBook now and not a MacBook Pro? If I were you, I would get a MacBook Pro with the base amount of RAM and upgrade that later.
-Doug

Final Cut Pro 7 Log and Capture Frame Sizes

Similar Messages

Maybe you are looking for