Final Cut Pro 7 Sound Card Problem...

Hello,
Im not really sure how to even explain my problem but Im going to try because Im going nuts over here.
I just bought a mbox 2 mini and am using it as a soundcard. Usually everything works fine but sometimes when in FInal Cut Pro 7 the sound drops out completely and my speakers become silent with the exception of a "put...put...put...put..put" sound. Gradually gets softer until it dissapears...and then it gets loud again and repeats.
Any ideas?

If your audio track has something other than a 48 Khz sampling rate, it will just beep beep on playback until you render it. I never heard it fade out and then get louder though -- possibly because I know exactly why it's doing that and never listened long enough??
I guess you will either have to wait for someone that also uses that device to read your post or mail their support people directly.

Similar Messages

Final Cut Pro/GY-HD111E import problems?

Final Cut Pro/GY-HD111E import problems?
With a brand new Mac Pro and very latest Final Cut Studio complete with updates I'm having a little problem trying to import footage directly from a JVC GY-HD111E (yes I'm in PAL land, UK) via FireWire into FCP.
Footage is 720p/25p and timeline is set up in FCP that way.
I'm doing a 'capture now'. The first clip I'm trying to import is about 45 minutes long with no cuts/breaks whatsoever.
What happens is after about 60 seconds or so, it FCP automatically breaks the clip for no reason and starts a new one, trouble is, when it does this I lose about 4 seconds of footage at that point.
It continues to break clips randomly, sometimes after 40 seconds or so, sometimes after 95 seconds, but usually between 30 seconds and 2 minutes and each time it starts a new clip I lose between 1 and 6 seconds.
As I say, there are zero breaks or cuts in this clip, I have a 45 minute clip that was shot in one take, not even a pause anywhere.
Is this a JVC issue or a Final Cut issue?
It's a pain as it simply means I can't import my 9 hours of footage hence I can't get on with this project.
Any ideas why this phenomenon is happening?
Thanks guys.

I mean I get the same errors.
Let me explain again.
There are NO start/stop/pauses in this clip.
I'm trying to import just ONE clip with no breaks, again, there are NO start/stop/pause, it is one continuous clip of 15 minutes duration.
The JVC creates some sort of errors at the Firewire output stage, it drops frames or other errors, FCP gets confused and creates a new clip, even though it is the same clip, but due to the GoP structure, it looses a few seconds too hence I can't import the footage as I keep loosing bits here and there mid clip. It is randam, every 30 to 100 seconds or so it will do this.

Quicktime 7.5 and Final Cut Pro is there a problem?

Quicktime 7.5 and Final Cut Pro is there a problem with this version of Quicktime?
i cant capture at all now! I can control my camera but no capture or footage in the window?
I can capture using IMovie fine!

Alister, there's no problem with it on my Mac, nor none that I know of ... I think you must have an install specific issue.
Check your camera setting matches your currently chosen Easy Setup ... in fact, close the Log and Capture window, then go ahead and re-choose the appropriate Easy Setup for your camera and I/O hardware, then choose View menu > Refresh A/V Devices, and then reopen Log and Capture ...
... still no go? if not then post pack with complete details of your hardware and software, your camera, the recording format, any I/O equipment that is in the mix etc.

I have been using Final Cut pro v6 without any problems but recently had to reinstall. Since then I can't open and view all my Quicktime clips. They appear white in timeline which means you can hear audio but not view picture. Any tips?

I have been using Final Cut Pro without any problems - v6 - for ages. I recently had a hardware issue and had to reinstall the software. Since then I can't open most of my QT clips in my fcp project. They appear as white clips - audio only no pictures. There are a few QT clips you can view as regular thumbnail images and they play ok. What's the issue? I have fcp v6.0.6 and QT v7. Any thoughts on what to do next?

Yes I did software updates which updated fcp to 6.0.6 and QT to version 7.7. That's as far as updates have taken me although i have requested daily updates. I forgot to say the clips don't play in QT view either. Again sound but no pictures when they are played.

Final Cut Pro X Export Speed Problems

I'm having problems getting any real processor speed out of my Final Cut Pro X exports. Whether I do a direct native Pro Res export straight from FCPX or send to compressor with the same settings, or even change them to H.264 or something else, i more often get processing that looks like the included picture, barely one processor being tapped. Sometimes ill get 50 percent which is probably all direct export is meant to use, seems like Qmaster distributed processing still doesn't work here. Once i get the file out and then bring that into Compressor 4 I get no issues, can get 50 percent with regular submit and full speed all cores running with Quickcluster submit. Any ideas why this is happening?
Just to be clear, these are native ProRes HQ clips, no effects, nothing, just selects I'm trying output, and since we can't do reference clips anymore, well....

TThe most common cause of this problem is that the media hasn't been imported properly and is still referencing a camera card or archive. If you press Cmd-E and no dialog appears, this can be one cause.
BTw, this is primarily a user to user forum, so no one here really cares if you go and use Premiere.

Final Cut Pro - Two Video Cards - Display Turns White

MacPro Xeon 2.0GHz
3 Gig Ram
Two nVidia 7300 Video Cards
Two CRT Monitors and One HDTV
I have two CRT monitors attached to my original nVidia card. I recently installed a second video card and attached a third monitor to my DVI output (on the second video card)
I tell Final Cut Pro to display video on third monitor as full screen output. I can see my 720p (or 480p) display. When I press play, the entire screen turns White. (I've tried a CRT monitor, and my LCD HDTV via HDMI to DVI).
If I remove my Right CRT monitor from my graphics card and attach my HDTV (giving me one monitor and one HDTV) I can get full screen 720p play back. But I don't want to edit with one monitor! I am wanting to have my two monitor editing setup with the third monitor as my full screen display (720p).
Why does three monitors result in a white frame for playback? Do I need to configure something?
Help!

#15 White or Black Canvas
Shane's Stock Answer #15:
Make sure the canvas or viewer are selected then go to VIEW>CHANNELS and set it to RGB. It might be set to ALPHA.
Shane

Final Cut Pro HD 4.5 problems with LiveType & uninstall/reinstall missingCD

Hi there. I am actually crossing my fingers hoping that people can help me with this issue of mine.
I have been using full version of FCP HD 4.5 for a long while then I moved from an apt to a new apt, then I realized some of my previous FCP projects would not opened. After a long while figuring out what was the problem, and I realized if any of my projects that contain any LiveType project, my projects will not open. Why? I have no idea why? I am hoping someone might have the answer for this.
So... I thought I would uninstall and reinstall everything, then I realized I might have misplaced my Final Cut install CD Luckily, I didn't delete the FC, so I decided to leave it on my hard drive. I went ahead and reinstall the rest, but I noticed LiveType doesn't show up at all except I was able to see LiveType Data. I couldn't see/find the LiveType Icon except the folder of LiveType Data. My another question is... was I supposed to have a LiveType installation CD along with the LiveType Data CD or that was the only installation CD I'm supposed to have? I thought I still have the list of items that Im supposed to have that came in the FCP HD 4.5 box... apparently, that is misplaced!
Can anyone answer my questions--
1. Why my FCP projects would not opened because of problems with LiveType & what is the problem?
2. Was I supposed to have a LiveType installation CD along with the LiveType Data CD or that was the only installation CD I'm supposed to have?
3. Is there a specific order that I am supposed to install FCP HD? Like I should install FCP first, then Motion 2nd, LiveType 3rd, & so forth? If so, please share it with me
4. Can anyone please share with me on what installation CDs I was supposed to have from FCP HD 4.5? I want to make sure I have everything, which I know I do not, or I can look for specific CD(s).
This is what I have (they may be for other program that I must have mixed it all together)--
1. Final Cut Pro HD HD Sampler (obviously that is NOT the actual FCP HD 4.5 installation CD, right?)
2. Motion Install
3. Motion Content
4. Apple Loops for Soundtrack
5. DVD Studio Pro 3
6. Live Type Data (1 of 2)
7. Live Type Data (2 of 2)
8. Peak 3 Express
Any suggestions or answers will be SO MUCH appreciated!
Thank you for taking the time to read this and answer my questions if you can
Carrie
Message was edited by: CarrieLouree

Thank you, Nick.
Shoot. That means I did misplaced my FCP installation disk!
I still don't understand why my FCP projects that contains LiveType wouldn't opened! I need to get most of them opened! Argggghhh.
I am curious ... is there any other program similar to LiveType (like creating exciting texts) that I can use to work with FCP?
Lemme know! Thanks
Carrie

Final Cut Pro Video Import Crash Problems

Whenever I try to import video files into Final Cut Pro X the program crashes. I've tried numerous formats and nothing is working. If it does pull the video in and lets me see it briefly prior to crashing, the footage appears shaky and with bright green lines running through it. It does not look like this if you play the clip outside of FCP. I've used FCP to make videos within the last year without this problem and have updated as well as uninstalled and re-installed the software to see if that would helped, but nothing has worked. I am stumped and my client is getting antsy for a finished product. Please advise.

I've had the same problem on both my laptop and my desktop:
Laptop specs: 13" MacBook Pro (2012) / 2.5 GHz Intel Core i5 / 8 GB 1600 MHz DDR3 / Intel HD Graphics 4000 513 MB / 450 GB Free space
Desktop specs: iMac (2009), Intel Core 2 Duo, 2.66 GHz / 296 GB Free space
I'm feeling like a tech moron though as I am not sure about finding this information, "Frame size, frame rate, video codec, audio codec, sample rate."

Final Cut Pro 7.0.3 problems importing 12fps movies

I open an Image Sequence in QuickTime Pro 7 and save it as a movie at 12 fps.
I import that movie into Final Cut Pro 7.0.3 in a sequence with timebase of 24fps.
Problem : the first frame of the movie appears only on 1 frame instead of 2, and the last frame appears on 3 frames instead of 2.
Anyone else seeing this problem?
My work around is to make a 1 frame Freeze Frame of the first frame and add it at the head of the movie and then delete the third copy of the final frame. It's a tiresome work around though because I'm making animated films and have hundreds of these clips to bring in to Final Cut.

Sharon, very sorry, I apparently have mislead you. Still sequences I do in Motion. There may be other ways of grabbing still sequences. The exported movie relies on frame rate of the composition.
After Effects does it, too.
after effects help entry: Change the frame rate of a sequence
When you import a sequence of still images, it assumes the frame rate specified by the Sequence Footage preference in the Import category. The default rate is 30 frames per second (fps). You can change the frame rate after importing by reinterpreting the footage item:
Select the sequence in the Project panel, choose File > Interpret Footage > Main, and then enter a new value for Assume This Frame Rate.

Final cut pro rendering and exporting problem

I imported all the video files from my DVD into Final Cut Pro.....and then when I brought them into Timeline...it asks for rendering..even when i did that it is taking too long to be rendered.....also when I put that from 'Safe Rt' to 'Unlimited RT' then it is showing error of dropped frames......so what SETTINGS and PREFERENCES should i use in Easy setup so that this error doesnt occur...and also I dnt have to render the complete DVD videos files of around 2-3 hours in it....Also when I made a new sequence I kept the setting as DV Pal 24 fps.....so which setting should i use????

Sounds like when you converted the footage from the DVD, you converted to the wrong format, or the wrong specs.
With DVD VOB files, normally one would use MPEG Streamclip (freeware) to convert the VOB files to QuickTime DV/DVCpro with AIFF audio at 48khz, 16 bit. In FCP you'd use the DV/DVCPro Easy Setup.
-DH

Final cut pro print to tape problem

So i needed to print this news package on a tape, when i go to do it, all seems well until i play it back. all i see is black screen. We use firewire to a jvc mini dv tapedeck and mac book pro with fcp 7.03. Need help greatly.

Make sure your camera is getting a signal...
#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Final Cut Pro transitions edit window problem

I am totally new to Final Cut Pro and when I click on the transition from the timeline the transition window appears in the canvas window but the bottom half of the transition edit window does not appear. Any ideas? It shows the transition down the the bar with start and end and then bellow that it's all gray.

Figured it out on my own... sorry to bother you guys.

Final Cut Pro - Freeze and Display Problem

When I try to render something in Final Cut, it renders for a few minutes but then the system freezes. I can still vaguely make out a dock and menu bar and final cut windows, but it's all pixelated and distorted. There are some black I can still move the mouse around (which is also distorted) but nothing happens when i click stuff. Has anyone else experienced this? Could this be a problem with my graphics card? (I bought my iMac new November 2007)
I've got FCS 2 and have installed all of the updates.

Is this a new, recent problem?
Or has this been the case since you installed it on your iMac?

Final Cut Pro changing sound speed

Part of my job is making sure that final mixes sync with the appropriate video delivery of NTSC, PAL, or regular 24fps film speed. Lately I've discovered that when I sync final mixes that I know should be synced to 25 or 24 fps picture they suddenly become 29.97 and I need to change their speed to 99.9% for proper sync. I've checked my settings and they are the appropriate speeds (PAL, 24, etc..,) Does anyone know if Final Cut will automatically change the speed of your sound upon import?

If your audio track has something other than a 48 Khz sampling rate, it will just beep beep on playback until you render it. I never heard it fade out and then get louder though -- possibly because I know exactly why it's doing that and never listened long enough??
I guess you will either have to wait for someone that also uses that device to read your post or mail their support people directly.

Final Cut Pro 6.0.3 Problem with Photo JPG Codec ?

Hi everyone...
I have been working with music videos for several years using FCP 5.x and photo-jpeg codec, everything works fine. As time going by now I have updated my FCP using 6.0.3 with hopes to get better features. But unfortunately FCP 6 has problem with photo-jpeg codec. The problem is when I load a photo-jpeg video, the gamma will changes every time the playback head is start or stop. And I can't using video transition (standard cross-dissolve) anymore because the video gamma also change at the in transition and out transition. It also appear in my video monitor and output file ! I have searching all day to find out what is exactly the problem, but never get the solution. Should i come back to FCP 5.x ? Is it a BUGS or what ? What happen with Apple, why they let this happened ?
For information the video is in SD PAL & captured using Blackmagic Decklink card.
Please help,...Thanks.

Welcome to the discussions...
I believe this has to do with using YUV or RGB as the rendering method. RT is always RGB, but try changing the setting for your timeline to whatever it is not now...
post back,
Patrick

Final Cut Pro 7 Sound Card Problem...

Similar Messages

Maybe you are looking for