Final cut pro 7 "sub clip"...

I just receive my rush from technicolor and the mov files are cutting straight in the middle of a take. How can i do "sub clip" whit the end of the shot "mov 1" and the beginning of the shot "mov 2"?

I think the only solution is to put them together on an timeline and re-export them into a new clip. Or you can use this new timeline in other timelines as a clip, but this is not very practical.

Similar Messages

  • Importing Final Cut Pro 10.1 clips to the Media Browser

    I am trying to use my video in my iBook story and I can't find how to share my Final Cut Pro 10.1 clips with the Media Browsers.  Has anyone run into this problem?  I was at a One to One today and it stumped us all.  Sharon

    I am trying to use my video in my iBook
    From the help files....
    Video and audio files: M4V, M4ANote:  For the Media widget, you can add a video file or an audio file (in a format QuickTime supports) to your book. You can convert other types of files using iMovie, QuickTime Player, or Compressor. For the HTML widget, the suggested file formats are MP4 video files and M4A audio files.

  • Exporting sequence from Final Cut Pro 7, some clips are pixellated and bad quality, does this have anything to do with the fact that I changed those clips speed?

    Hello,
    Bit of a beginner using Final Cut Pro 7
    Am currently trying to export a sequence using quicktime conversion.  Sequence has various filters and effects over it and when I export it some of the clips are pixellated and appear to have not exported correctly.  From what I can gather the affected clips have either been slowed down or made faster.  I am wondering whether this is the reason they have not exported correctly
    Any help would be appreciated
    Cheers

    More information needed.
    Codec of material?
    Sequence settings? (codec)
    fwiw - do not use quicktime conversion. Use Export Quicktime with Current Settings enabled then do any format conversions in Compressor.
    x

  • Final cut pro 7 hd clips

    When I export a Quiktime file from Final Cut Pro 7, why do I get a mosaic effect on the edges of camera or subject movement (like blurred lines while the movement is happening in the clip)? Is there an export setting or sequence setting I am missing? Thank you for any assistance. I shoot on Canon Vixia HR20 in HD, and I allow FCP to modify sequence settings when I move the clips from the Browser to the Timeline. Thank you for ANY input. Curtis

    Also, the camera records a highly compresed version of video. While it looks like FCP will accept these files in their native format, it really does not like them nor does it edit them without issues.
    Best practice is to convert them to ProRes LT before bringing them into FCP. If the camera is supported by FCP, use Log and Transfer. If it isn't then Compressor or ClipWrap will usually work.
    Once the material is in ProRes, you'll find editing moves much more smoothly with few issues on output.
    x

  • Final Cut Pro: Ingested AVCHD clips are sometimes distorted

    Apple has released this support info:
    Last Modified: February 03, 2009
    Article: TS2572
    Symptoms
    AVCHD clips you transcode to ProRes from the Log and Transfer window are sometimes jumpy or distorted.
    Products Affected
    Final Cut Pro 6.x, Perian Quicktime component
    Resolution
    This may happen if you installed the Perian QuickTime component.
    To temporarily disable Perian while using Final Cut Pro:
    Open System Preferences.
    Click the Perian icon at the bottom of the System Preferences window.
    Select the General tab in the Perian preference pane.
    Click Remove Perian.
    If you would like to enable Perian after you finish working with your AVCHD clips, return to step four but click Install Perian to enable it.
    http://tinyurl.com/bvzxx8

    1. FCP does not work with material this is not "native". To see what "native" formats FCP supports, look at the standard presets. If you don't know what a FCP standard preset is, do some research. The Manual is a wonderful place to start.
    2. FCP does not work well when you play material from the system drive. Editable media MUST be stored on a non-system drive.
    The key points to understand are - if your material is not a FCP native format (codec), convert it to one (pro res 422 works just fine) and use a non-system drive as your media storage/ playback drive.
    If you do this and you still have problems, post back. We'll do what we can to help.
    cheers,
    x

  • Final Cut Pro 6 combining clips?

    Can someone please help me with this... I am working with many small clips in a sequence and cant figure out how to somehow join them into one big clip so i can change the speed of the (combined clips into one). I was reading the manual and all I could find was "through edit" and that did not solve my problem. It is very similar to what i am looking to do but I need to take clips in the timeline and change the effects or speed on them as a whole. If anyone can help I would really appreciate it. Cheers

    Or you can butt them together in the sequence, export the sequence as QT/Current Settings/audio and video/self contained.
    Then reimport the export movie and apply the time changes

  • Final Cut Pro Timecode breaks like iMovie

    I'm wondering if there is a way to have final cut pro automatically slpit clips based on the timecode like iMovie does when importing. I have always imported into iMovie because that will split all the clips up. After doing that I put the project into final cut but its a pain to render all the audio every time. If there is a 3rd party software that would solve this problem im interested in that as well.

    There is a simple application from Squarebox software called LIVE CAPTURE PLUS that will do what you want to. It is ~$50US iirc.
    It will capture long sections then, from that larger file, create smaller files based on start/stop data. These are individual media files, not sub-clips.
    If you need a more comprehensive media management strategy, they also sell CatDV, a media database application.
    http://www.squarebox.co.uk/catdv/catdvpro.html
    good luck.
    x

  • Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

    Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

    If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

  • Why does Compressor take so long to export a 10 minute video clip from Final Cut Pro?

    I've been trying export a 10 minute clip from Final Cut Pro. so it can be used with DVD Studio Pro and burned. However, the rendering process has taken 12 hours! The clip I'm exporting has minimal effects, no music, and is in 1080i 30fps. Does anyone know what's going on or what I can do to speed up the process?

    First: How are you exporting? Are you using the Share feature or  Send to Compressor?
    Second: You haven't said anything about your system configuration or really very much about your movie. What is its format… is it really 30fps or 29.97? Whatever it is, are the project settings identical to the clip properties, or were they changed?
    Russ

  • I have been using Final Cut pro v6 without any problems but recently had to reinstall.  Since then I can't open and view all my Quicktime clips.  They appear white in timeline which means you can hear audio but not view picture.  Any tips?

    I have been using Final Cut Pro without any problems - v6 - for ages.  I recently had a hardware issue and had to reinstall the software.  Since then I can't open most of my QT clips in my fcp project.  They appear as white clips - audio only no pictures.  There are a few QT clips you can view as regular thumbnail images and they play ok.  What's the issue?  I have fcp v6.0.6 and QT v7.  Any thoughts on what to do next?

    Yes I did software updates which updated fcp to 6.0.6 and QT to version 7.7.  That's as far as updates have taken me although i have requested daily updates.  I forgot to say the clips don't play in QT view either.  Again sound but no pictures when they are played.

  • How do I swap one clip for another in Final Cut Pro 7?

    How do I sway one clip for another in Final Cut Pro 7? I am doing what it says in a book but it is not working. Thanks.

    You drag the clip from the browser to the clip on the timeline. Wait till the timeline clip goes white. Drop it and pick from the menu that appears the replace option you want.

  • HELP!  How can I view a clip frame by frame in final cut pro?

    Hi, does anyone out there know how to view a clip in final cut pro frame by frame. I don't really want to use the jogging function as you cannot see each individual frame just all the frames snapped together. Any help would be much appreciated. Thanks.

    http://discussions.apple.com/thread.jspa?threadID=1304742&tstart=0
    It is really time to open the manuals, do the tutorials, and learn the basics of how this application works. You'll be amazed at what you learn it can do!
    Shane

  • I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?

    Hello everyone
    I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. I've tried to repair it using DU, but it said I needed to backup all my data and reinstall the OS. How do I backup my data to an external drive?
    And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?
    Hope you guys can help me!

    You need to back up 2 folders, Final Cut Events and Final Cut Projects which by default are located on your Movies Folder. You can always check by clicking on a clip inside Fianl Cut X and selecting Show in Finder in the contextual menu for the selected clip.

  • Hi I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

    I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

    What device?
    What format?
    How are you importing it?
    Can you find the external audio with Finder?
    Where is your destination file when you import it?
    Andy

  • Transfer clips and projects from final cut pro x trial to final cut pro x

    Just bought the final version of Final Cut Pro X and cannot transfer my existing clips and projects from Final Cut Pro X Trial. 

    RRight-click on your library, select Open With and choose FCP.

Maybe you are looking for

  • Looping Restart in Early Intel iMac after recent 10.5 update

    My friend's iMac is stuck in a restart loop after downloading the latest update for her 10.5 system. She hadn't installed an update for about 4 months so I am not sure what update would have caused the loop. Her computer was working fine before the u

  • Multi Mapping N:1 Mapping

    Hi ,   I want to test N:1 mapping at design time    Source MsgType 0 to unbound in Msg Mapping    Interface mapping Source MI 0 to Unbound    Target MsgType and MI are 1    To add more I am using pattren : Collect & Merge in BPM     in the Test tab o

  • Cannot see offline folios after updating to iOS8

    Hi guys, since i've updated my ipad to iOS version 8, i'm experiencing some issues with the adobe content viewer app. The problem is that i cannot open the editions created before the update. The status bar keeps working but nothing happens. Differen

  • Advice on slideshows

    Hi All, So im now developing another site and i need to display a photo gallery. I have it in my head to have slices, rectangular in shape of several pictures that are positioned in the middle of the page, that fade in and out, all at different times

  • Scroll Bar in Table

    h3. {color:#800000}*Hiii all,*{color} h3. {color:#800000}*i notice that if i have a table with some rows, more than the height a scroll bar showed up, but if you use next button the scroll remain in the top but the selected row is next, until you go