Final Cut Pro Academic and Final Cut Pro 5

I am a novice with FCP, my question is can files created in FCP 5 be used by Final Cut Pro academic. Every time I try to open a file I created at home witth FCP 5, I can't open it at school with FCP academic

David's right. Files are not backward compatible. I had the same prob when I was in school. So I just worked at home where I had an academic version of FCP 4.5HD. Told my instructors the problem and they understood. Then I did the universal crossgrade to FCP Studio. It's the ONLY time Apple allowed an upgrade from the academic to the pro version of anything.
Jonathan

Similar Messages

Final Cut Express 4 and Final Cut Pro 7

I have been working at school on Final Cut Pro 7
I just bought Final Cut Express 4 thinking it would be a cheaper way for me work at my home computer. However, when I open my Final Cut files (created in Pro 7) I get a message that says their format is too new for Final Cut Express 4.
Is there a solution to my problem? Is it really not possible to go back and forth between Final Cut Pro 7 and Final Cut Express 4?
Is there some creative way of making this work? Help!

Unfortunately not. You can start the project in FCE. Open it FCP, but once it's saved in FCP, it will no longer open in FCE. (It's not supposed to anyway, though it does rarely in some cases where very little is done in FCP.)

Hello- I have final cut pro X and final cut studio. Should Compressor 3.5.3 work with fcpX. Whne I try to export to it aI am told I must go to i-apps and buy compressor.

Hello- I have final cut pro X and final cut studio. Should Compressor 3.5.3 work with fcpX. When I try to export to it aI am told I must go to i-apps and buy compressor.

No, FCP X will only work with Compressor 4.

Deployment of Adobe XI Pro Cloud and Adobe XI Pro Non-Cloud

Hello - If you have Acrobat XI Pro Cloud and Acrobat XI Pro Non-Cloud deployed in a large environment where both products were packaged with the Adobe Application packager at separate times, how does one systematically determine or report on which version is which (file version, registry path, exes, product ID, etc). As best I can tell they are literally exactly the same.
Here's the scenario, I am rolling out Adobe XI Pro Cloud globally to many computers, a good portion of our computers already have Adobe XI Pro non-cloud version. Typically I run a report on ProductID, RegistryKey, or FileVersion to isolate the correct product that needs to be deployed. In this case, they report exactly the same. What is the best mechanism to report on to separate the two?
Is there a file\folder\registry key that would exist only for an Adobe XI Pro Cloud-Edition installation?
(Note: most of these systems will also have the Cloud version of Illustrator & Photoshop installed, which needs to remain intact, looking for CC folders doesn’t indicate specifically which Acrobat version they have in that case)
Thank you,
Tony

This may help: http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/troubleshoot.html#software-ta gs
Ben

I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes

I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes.

Hi there cv4928,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using and what application will we be printing from?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

User Contributed Tips in the Mac Pro Displays and the Mac Pro forum

*The following User Contributed Tips are located in the Mac Pro > Displays and the Mac Pro forum:*
None at this time.
*The following related tips are located in other areas of Apple Discussions:*
a brody - Using a second Mac as a display for a first
http://discussions.apple.com/thread.jspa?threadID=1587927
Publish date: July 7, 2008
See also User Tips Library

You can use the two graphics cards, but it's only useful if you have more than two displays. It won't give you higher speed.

Can i install Final cut studio 5 and DVD Studio Pro 4 on OSX lion

Is any body who can help me on giving me some direction on how to install Final Cut Studio 5.1 and DVD Studio Pro 4 on my OSX Lion, if it's doable. Thanks

The easiest way is to install Rosetta from a Mac OS X 10.6 DVD first.
There's also a way of doing it via Terminal that's been posted here a couple of times. A search should bring that up.
Edit: Found it... https://discussions.apple.com/message/21416133#21416133 read the second post.

Final Cut Studio 2 and Macbook (not Pro)

Curious to know if anyone has any experience running Final Cut Studio 2 on a non-pro Macbook. Can Macbook handle Final Cut Pro alright? Is video memory an issue?
Thanks,
Mbs

For the record, Motion will run on a MacBook. It's just that some of the features aren't supported, and will produce incorrect results. So I wouldn't rely on it.
Final Cut, however, works perfectly. No problems at all.

How can i get my Imac, running OSX 10.6.8 with a 2Ghz Intel Core 2 Duo, how can i get Final Cut Pro 4 and DVD studio pro 2 to run on it?

I just bought an IMAC running OSX 10.6.8 (not sure what flavor that is). The processor is 2Ghz Intel Core 2 Duo (Late 2006). When i run Final Cut Pro 4 on it I get the following error.
                    "Configuration error
                       This software requires certain hardware or software which is missing
                                * AGP graphics Card"
If Final Cut Pro 4 doesn't run on my system, what version of Final Cut can I run on this as I am a filmmaker and really am comfortable with Final Cut Pro.
On the same note I also have DVD studio Pro 2 and that just quits without any message.
Hope any of you can be some help.
Thank you,
Doug

This is my first mac in a long time so i'm not sure about what this mac is as i didn't buy this from apple (ala Amazon). I'm a tad confused about the Intel/PowerPC thing. I do know the software version for sure, but the Intel/PowerPC is very confusing. I just need to find someone who would know about this question. It doesn't say G5 on this computer. Thats my biggest confusion. Help Me...

Final Cut 4.5 and New MacBook Pro

I've been out of the loop for a while. I had a 1.5ghz Powerbook and Final Cut HD, etc. I recently bought a new MacBook Pro and was suprised to see that I could not open Final Cut Pro anymore (says I don't have an AGP card). What're my options? Thanks

You need the Intel version of FCS, which is version 2.
Should run you about $499.00 when it ships next month.
Apple has an inexpensive upgrade available for nearly fifteen months and was promptly displayed at its web site.
That expires on March 19th.
It pays to stay in the loop I guess.
I'm less patient than Jim.

Snapz Pro X and Final Cut Pro

I'm screen capturing QuickTime movies of usage of a website via a web browser to include in a video production. I'm using Ambrosia's Snapz Pro X to do the video capture. I've sized the browser to 720x480 for the capture. I'm exporting the capture using the animation codec (which looks much better than a DV stream), but it comes in at 8 frames per second, which doesn't mesh with my timeline (at 29.97 fps).
Is Snapz Pro X a good solution to do this, or is there a better program to do this? If Snapz Pro X is a good choice for this, what settings should I change in the program to get the best video for use in Final Cut?

AFAIK Snapz records the screen activity into RAM as OS-level screen calls and then renders the file to your drive with whatever CODEC you choose when you save the clip. So the choice of CODEC won't affect the frame rate, but the size of the capture frame will.
The Animation CODEC is the best choice as it retains the full fidelity of the screen grab (no loss of quality). The main thing to remember when configuring the Animation CODEC is to set the keyframe rate to 1 (every frame is a keyframe). Final Cut does a bad job of handling key frames in the Animation CODEC when making cuts edits between keys - you'll get weird artifacts.
This makes for big files and Final Cut will want to conform the clips to 29.97 (or whatever timebase your using) so it will need to render the clips before you can edit them. Make sure your timeline is set to the same frame size, CODEC and KEY FRAME rate as the clips coming in.
Once you've done your cuts and are happy with your edit, output directly to whatever delivery CODEC your going to use: MPEG2 if DVD, Flash, H-264 etc for web. Avoid rendering to DV as the DV CODEC slaughters text and hard edged objects.
My two cents worth.
Chris

Final cut pro 7 and final cut pro x

Is it wise to move from final cut pro 7 to final cut pro x for me who is already using fcp7 with no problems?

I think you should at least download the free FCPX trial and try it, for sure. I've edited in FCP since it came out and when I really tried earnestly to learn X, after a week or two, I was really impressed. The reasons are numerous, but one of the big improvements is speed. FCPX is very fast at handling video, all kinds.
If you know FCP7 well, then you will already understand the importance of many aspects that apply to any HD NLE, such as drive speed, sufficient drive space, (external w/fast language, Thunderbolt, USB3 or at least FW800) etc., but also there will be a kind of learning curve to the different way FCPX organizes, maybe more of a learning wall. But it's too much to lay on you in this reply - suffice to say I think you will love X. Especially if you really stop to learn it. It really is nice, and often receives completely unfair criticism.

Can Final cut pro 7 and Final cut X live together

I just spoke to one of my friends who installed Final cut pro X and told me that it basically crushed his version of 7. My idea here was to install final cut X to start learning the new workflow and keep my version of Final cut 7 for compatibility issues. Question is can these two live together on the same machine?
Please note my friend is the type of guy that if he does not see the software icon in the dock it basically does not exist.
Thank you in advance everyone

You can read the official Apple best practice guide here:
http://support.apple.com/kb/HT4722
MtD

Final Cut Express HD and the Macbook Pro

I just purchased a Macbook Pro along with final cut express HD. After purchase I read that FCE HD won't work with the macbook pro. I was hoping to see if anyone knew if they were coming out with an upgrade to the universal version like they are with Final Cut Pro.
Intel based macbook pro Mac OS X (10.4.4)

That will not work. Ian's solution is for dual core G5s and PCIe based iMacs. It does not address Intel based machines like the 2006 iMac and the MacBook Pro. These machines will have to wait till the end of March for the release of new Universal Binary software to run on them. It's possible FCE3 will never run and will need to be upgraded to another version. If you recently purchased FCE HD to run it on this new computer, I'd suggest, if you can, to return it until the position on the new software becomes clear.

Apple Pro RES and DVD Studio Pro for burning DVDS

I have a FCP file, shot in HD, 5.5 min long, in apple pro res. It needs to be in a format to send to various people to play on a commercial DVD player as well on apple and pc computers. So far I have made a H264, as well as a MPEG 2 on a "-" dvd and both will play only on my mac computer, not on a playstation 3, nor a pc, nor a commercial DVD player. What should I do?

so sorry I sounded curt....must be the heat.
I have zero experience. Someone was helping me compress my final cut pro movie which was apple pro res, then , in compressor we tried H.264, then MPEG 2, using "-", but neither of these would play on anything other than my mac.
I need them to be in a format that I can send to people who may be using a pc, mac or commericial DVD player.
It's very nice of you to reply....

Final Cut Pro Academic and Final Cut Pro 5

Similar Messages

Maybe you are looking for