Final Cut Pro and Compressor not working

I know this has been asked before, but I didn't find a solution to my problem yet.
Ever since I upgraded to Mavericks, I can't export any movies.
I get the following message: The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
And when I send the movie to compressor, I get the video rendering error: 60.
I'm at a loss and would really apprecciate your help.
Thanks

It's probably the flux capacitor ... just give it a gentle but firm tap about 2 inches below the indent (just behid the mounting bracket) ... don't leave the tap on when you go out though or you will flood the bathroom.
Hope it helps
Andy

Similar Messages

  • Final cut pro x dissolves not working

    Final Cut Pro X,  dissolves not working, When I use Ribbon, Heart ect, they showup on the video flickering, will not allow me to render the video, any help would be greatly appreciated.

    Sorry. That should be what's the media? What are the project properties?

  • Final cut pro and compressor

    I have a FCP project that I have been working on for a year and have made DVD's from through compressor. Suddenly when I open compressor it states that there are no files associated with this project.
    Another user suggested I trash the preferences, but am loath to do this incase it makes things worse as I'm not very clued up on some of the systems functions.
    Please help
    CB

    If you've been on the project for more than a year, it must be legacy Final Cut Pro and not FCP X.
    This is the FCP X forum - you should ask this question in the Final Cut Studio forum:
    https://discussions.apple.com/community/professional_applications/final_cut_stud io
    Andy

  • Final cut pro HD 2 not working with new updates

    recently purchased a new imac. Most of my old programs were not supported. I updated to 10.9 from 10.5. Now, all the programs are running except Final Cut pro HD 2. I get a message sayin"power pc applications are no longer supported" Any suggestions? I read in an old discussion (from 2011) that I might need to download Rosetta?

    MichelPM wrote:
    ... or you maybe able to run your version of Final Cut under virtualization software.
    I do not know which version of FCP the OP is using as I do not recognize his designation of Final Cut Pro HD 2.
    However, last weekend I attempted to install Final Cut Studio 2 (Final Cut Pro 6) into Snow Leopard installed in Parallels, as a test.  It failed!
    Final Cut's installer suggested the following problems: not enough VRAM - 64 needed; 0 present (even though Parallels is set for more than the minimum required VRAM); and a missing video card.
    I attempted to work around this problem by using Pacifist to install FCS2, which worked, as far as the installation was completed.  However, when I attemped to run FCS2, a dialog box came up with indicated that same two problems and then it quit.

  • Final Cut Pro 2nd monitor not working properly?

    Been here before a long time ago, can't remember how it was resolved.
    Working in a new edit suite, FCP Studio.  Two new Samsung monitors (not my choice).  I want one to be my playback monitor.
    I set:
    Final Cut Pro > Audio/Video Settings
    > Digital Cinema Desktop Full Screen
    > View > External Video > All Frames
    But all I'm getting is a black frame on the 2nd monitor.
    They've also got one of those very flat alluminum keyboards ... where F12 becomes a sound control.  I'd love to know how I can change the function key to work as an FCP action / 2nd monitor toggling on and off.
    That's two questions.  Would be most appreciative of an answer for either.
    Ben

    Hey Andy,
    I did the first half of your suggestion, but not the second half.  Heading down to the studio this morning ... set up in a tiny white chapel looking out across the silvery North Atlantic ... and will try the second half of your suggestion.  Will also see if there are two graphics cards installed in the Mac Pro.  Will also check out the Window > Arrange in FCP (something I should have checked first off).
    I talked to a filmmaker who previously worked on the system, only to discover he never uses the second monitor as a full screen, but rather as a large 'bin'.  Interesting.
    If worse comes to worse and I can't solve it I suspect I could size the canvas window to super large and drag it over to the second monitor.
    Will post back when I've tried the latest suggestions ...
    Thanks you mucho guys,
    Ben

  • Someone help please!! half of final cut  motion and soundtrack not working

    Please help ! after i had to re-install my tiger after a leopard crash, my final cut soundtrack and motion bounce once in the dock, and then nothing happens. Everything else works fine. updated the latest updates too!. cannot re-install apps all greyed out. content disks where stolen so re-install is not a option. Please help. Final cut studio 2 half working? I'm a student and my project is due last week. Please help!

    You need to re-install. I don't see any way around it. If you've altered the OS, you need a complete re-install.
    Patrick

  • Final Cut Pro X Export not working

    Running Final Cut Version 10.0
    Just upraded to OS X Mavricks.
    Go to export project in Final Cut - nothing happens. It's as if I clicked on nothing. Tried using the shortcut command+E - also nothing.
    Export Audio works but not Export Movie.
    Tried exporting using Compressor but given that program is a $50 piece of garbage, that didnt work either.
    What gives???

    Ok, found it !
    First of all, update FCPX. Then, you will not found your project. It's normal, it was my problem. But, the answer is just here: you need to udpate you file too. It's explained here: https://discussions.apple.com/message/24788882#24788882
    Tell us if it's working.

  • Final Cut Pro Trial does not work, drr nicht erkannt

    Trial download answers with a mistake note "Final Cut Trial 10-0-3.drr nicht erkannt.
    Was solll das, wenn schon die Trial Installation nicht funktioniert wie soll es dann das ganze Programm !??

    eifelipad wrote:
    No, I have everything required on the computer, but .. .
    nope.
    FCPX braucht 10.6.8 mindestens, lt Deinen specs fährst du noch 10.6.3

  • EOS MOVIE Plugin-E1 for Final Cut Pro Plug in not working?

    Can anyone tell me the proper procedure for installing a plug in to FCP? Ive tried installing the above plug in, but when i goto log and transfer no thumbnails come up and nothing transfers?? Am i installing the plugin wrong, or is there an issue with the plug in??

    This guy is having the same problem:
    http://discussions.apple.com/thread.jspa?threadID=2491897&tstart=0

  • Urgent! Help, how to deal with m2ts file in Final Cut Pro or Compressor...

    Dear All:
    Please help me solve this urgent issue, I've got source that came with the mpeg-2 Transport Stream (48min content @ 3.42GB size) format , but both my Final Cut 6.0.6 and Compressor 3.0.5 can not open this type of file, is there any way that I can transcode this m2-ts file into a Final Cut Pro and Compressor readable format with the highest quality possible? And how to do it?
    Thanks in advance.
    Kevin
    Message was edited by: Kev C

    hey, Thanks David, actually, I used MPEG Streamclip prior to post this massage, the problem is that my
    MPEG Streamclip 1.9.2 can't correctly open this m2ts file (it says it can not read the file size...) and I also tried using VLC to transcode it, but with no luck, I can not find the right video and audio format to come out with QT playalbe file. Let me try ClipWarp to see if it works.
    Kevin

  • Does CC 2014 eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422?

    Hello:
    Just today, I was working on a Mac system that does not have any of the applications that I would have expected to need to have installed in order to do more than just decompress movie files compressed with Apple ProRes 422.
    I was expecting to have to install Final Cut Studio 3, Final Cut Pro X, Compressor 4, and/or QuickTime 7 with the QuickTime Pro key; however, none of those applications are installed and I am able to create custom QuickTime Apple Pro Res422 Sequences in Premiere Pro as well as export using Apple ProRes 422.  After Effects and Adobe Media Encoder also show all the Apple ProRes variations.
    Does CC 2014 eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422?  Is it something happening on the OS or QuickTime level that would affect CC or CS6 in the same way?
    I've done a web search, but haven't really come up with anything other than older articles about needing to have FCP installed (and I typically work on systems with Final Cut Studio 3 installed as well as CS6, CC, or CC 2014).  If more detailed information is available, it would be great to be able to read up on it.
    The system is a 21.5-inch iMac running Mac OS X 10.8.5, QuickTime Player 10.2, and Adobe Premiere Pro CC 2014 (8.0.0 - I know an update is available for PrPro, but it's not my system to make that change).
    Thanks in advance,
    Warren Heaton

    Hi Emil:
    I use ProRes all the time as well, but I have Final Cut Studio on my workstations.
    I had not come across MindPower009's YouTube video.  That explains how ProRes could be showing up without FCP or Compressor.
    So, the answer to my question would be, "No, CC 2014 does not eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422; however, if you are willing to be in violation Apple's terms of use, you can install the ProRes codecs anyway."
    Even though MindPower009's YouTube video comments claim "FREE and LEGAL", it's clear from both the Apple download page and the ProRes codecs installer that Apple expects you to own at least one of their applications.
    Thanks again for the link!
    -Warren

  • When sending job from Final Cut Pro to Compressor using local QCluster

    When sending job from Final Cut Pro to Compressor by way of Share and using the local QCluster, the audio renders, but the video errors out saying something along the lines of Can not locate file.
    If I use 'This Computer' it works fine.
    What gives?
    Fresh install of OS and FCS.
    Thanks!

    I'm just learning the intricacies of Compressor and Qmaster myself, but I have learned that when you use Qmaster you can not share directly from FCP. You must export a Quicktime movie (reference movie seems to be fine) and input that to Compressor. This is only an issue when using Qmaster, as you've seen.

  • Student Help advice! what is best iMac model for Final Cut Pro and logic pro

    Hi
    I am currently looking into getting a iMac, but is toggling to device if I need a 27inch or a 21inch(top model),which will be used for Final Cut Pro and logic
    There is a lot of money being invested iMac, and I really not want to be stu k with a computer that not going to keep up with the amount of work load in the future.
    The specs that I have on mine are..
    21inch 
    Upgrades include
    Sdd drive 512gb
    Intel core i7
    16gb of ram
    Or
    27 inch
    Upgrades
    Fusion drive or sdd 250gb
    Intel core i7
    (Possible graphic card) NVIDIA GeForce GTX 680MX 2GB GDDR5 [+ £105.60]
    (Ram is way to expensive so will buy from second party)
    Anyone who has brought a iMac for final cut or logic what would you likely buy?..Am really stuck on the hard drives between the 27inch fusion and 512gb on the 21inch
    My budget is £1900
    My fear is that the 21inch top model's graphic card may not be good enough for advance editing on Final Cut Pro In the future when I start to get more deep into editing..logic really only needs 8gb to run smoothly..buts its the final cut specs that am having problems deciding. I know iMacs are not future proof or technology lasts for that matter, but I do expect to have it run good for a number of years before I upgrade again.
    If anyone can give me some advice, or even tell me about there set up they have for media work please let me know.

    All kinds of things affect system & HD performance, I can't tell you why your 4 year old Mac is slow.  Just because your old Mac is slow doesn't mean that a new iMac will be equally slow.
    You are correct about the issue with the smaller fusion drives.  It's one of the reasons I am not high on recommending them.  Everyone thinks they want power & performance but don't understand the gap between marketing and real life performance.  The 1TB fusion drive however should give you a good combination of rapid access and sizeable storage capacity.
    I have used external FW800 / 7200rpm drives for years and have never had a problem with any of them.  I consider them very reliable but admittedly I DO NOT use consumer drives like the WD MyBook that the big-box stores sell.   For the most part I assemble my own with OWC Mercury Elite enclosures.  In the past few years I have centered on WD Caviar Black and WD Scorpio Black drives.  I also have some Seagate Barracuda 7200.xx drives.  They all perform excellently and reliably.
    Pls. refer to my earlier post for what i recommended to you.

  • Will Final Cut Pro 4.5 still work if I upgrade to Mac OS X v10.5.4?

    Will Final Cut Pro 4.5 still work if I upgrade to Mac OS X v10.5.4?

    I'm with Jon on this one. I know someone who uses FCP 5.0 on a MacBook Pro, he has all sorts of wierd issues including:
    Projects he has created throwing up an error message "Unreadable on this machine" when re-opened.
    Projects losing and refusing to connect to render files.
    Dissolves simply not working -this is not to do with lack of handles, it just happens.
    LiveType and FCP's own title generator files not automatically compositing.
    Lots of kernel panics and unexpected quits.
    These might not happen all the time, but always crop up at the worst possible moment.
    I can move his project files and media to my setup and everything works.

  • Failed to send my project in final cut pro to compressor

    I tried to send my project in final cut pro to compressor but when I go to file then see send to compressor it will not let me click on "send to compressor". I checked but none of my files are missing or anything and the project is only 4 minutes long. This has happened to me once before and it completely crashed my computer. I had to start out fresh which was a horrible process. CAN SOMEBODY PLEASE HELP?! (URGENT)What might I have done wrong that this happens? In the picture below, this happens and I have no idea why that is.

    I suspect it's a FCP X issue rather than a Compressor issue.
    Will FCP export a master file? Make a short section with the range tool and find out.
    Tri reseting the zoo's preferences. Hold down the option and command keys when you launch to reset.
    Russ

Maybe you are looking for