Final cut pro conflicting with waves plug ins

Hi, I'm a pro tools user and I have wave plug ins. These plug ins are automatically loading up in final cut when I first enter final cut.
What is happening is I click on final cut to boot it, it starts loading my plug ins, then it says that it cant find a couple of plug ins. Then it automatically quits, giving me no access to final cut.
So basically I cant get into final cut at all. I erased my plug in preferences and my final cut preferences, that did nothing. I booted with extensions off in safe boot mode, that still did nothing.
IS THEIR ANY BUTTON I CAN HOLD DOWN TO BYPASS LOADING THOSE PLUG INS WHEN I BOOT UP FINAL CUT SO IT DOESN'T CRASH MY PROGRAM SO I CAN GET INTO FINAL CUT AND TURN OFF THOSE PLUG INS?
Thanks.

If you have more than one waveshell, which may be the reason for your problem (like one that calls for plugs you don't have), the quickest solution is to drag all of them out of the folder (applications/waves/waveshells) temporarily. Then make sure FCP launches correctly (it should). Then put only the lowest numbered waveshell back in, and try again. This way you'll find which is the culprit, and can permanently remove it. I had this problem and used this solution successfully.
If you have only one waveshell, start by removing it to see if that solves the launch issue, which it should, then look at your plugins themselves (applications/waves/plugins) to see which might be the culprit. If there are any demo versions or ones you otherwise don't own licences for, remove them first and try relaunching FCP. You should eventually find the culprits and be ok.
Also, make sure your Waves plugins/waveshell are updated to the proper versions for your OS and Pro Tools versions. See the waves site for details on that.
Ted Spencer, NYC
www.tedspencerrecording.com

Similar Messages

  • Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

    Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

    Update the software. There is no reason to run a two year old version.
    Russ

  • Why can't I use final cut pro 7 with Mavericks?

    Why can't I use final cut pro 7 with Mavericks? Is any one else having problems? All my media is reputedly "offline" even though I can see all the files. Using the reconnect to media function doesn't do a thing. All of my previous projects are the same. Any ideas would be most welcome!

    Because it is $299.99, and there is tax.
    Cheers,
    GB

  • Hi Ive downloaded the free trial version of Fcpro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later,Help

    Hi friends.
    Ive downloaded the free trial version of Final cut pro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later, please can anyone Help.

    Just download Mavericks (10.9) its free and installed it (Mac App Store)

  • Final Cut Pro / problem with old Audio Units effects

    Hello,
    Has anyone encountered this problem in Final Cut Pro:
    I had a set of Waves plugins, but I installed a new set of them and deleted the old ones + preferences and anything connected to them.
    When I start Final Cut, the program is asking "Where is Waves plug-ins folder?" and it is searching for my old waves folder...
    I tried to look in the manual and in the program's pull down menus, but there's no answer offered..
    I can get the program running though, if i click "cancel" for each of the waves plugins that used to be in the old folder.
    Any experiences? Help much appreciated,
    Eero

    Archiving projects would certainly be a good idea. Unfortunately, I am editing a project which is the collaborative effort of a host of volunteers who made hundreds of shots spread across events that need to be kept available throughout the editing process. So, yes, we are pushing the application past reasonable limits. Still, the project is good fun.
    As an experienced editor (Media100, FCP4-7, Premiere Pro), I would have been happier to have been able to continue along the FCP7 path. FCPX is not my cup of tea, apparently, even though, by now, I have become rather familiar with the application. FCP7 was quicker, more stable (yes) and gave me infinitely better control. Or at least a much better "sense of control" so as not to offend any supporters or fans of the new application. So that's just my personal opinion.
    But I must admit that it is impressive to see how easy and enjoyable Apple has made it for even absolute beginners in video editing to put something decent together without much explanation or training. I have seen this with a few of the volunteers I am working with on this project. FCPX certainly has its merits, therefore, but you are absolutely right in your comment. We must try to keep our active (and actually mounted)  "Final Cut Projects" and "Final Cut Events" folders small, setting aside those which do not necessarily have to be available  in separate "parking" folders. For the next project (in general language, not FCPX jargon), I will bear this in mind myself. Cheers.
    Best Regards, Huib

  • Final Cut 7 crashes when loading plug ins!

    how to manage which plug ins final cut pro 7 loads when launching software ?

    You can use PlugIn Manager, part of Digital Rebellion's Pro Maintenance Tools.
    There is a free trial download:
    http://www.digitalrebellion.com/promaintenance/
    or see if this article helps:
    http://www.larryjordan.biz/technique-how-to-remove-unwanted-plug-ins-from-final- cut-pro/
    MtD

  • Final cut pro crashing with slide show photos

    I am working with a large slide show - a few movie clips, but mostly still images from Aperture.  The photos were shot wtih a Nikon D300 in Raw, not that I think that matters much at all.
    Becasue this is a slide show I am working wth short durations for the images - usually 3:14.  Most of the transitions are simply cross dissolve, but some are more complex.
    I am getting again and again crashes - or the spinning color circle going to oblivion and requiring a Force Quit. 
    Either can happen when adding new material, moving arround existing material, or trying to reset durations, add text, different transitions, or working wth the Ken Burns options.  Sometimes it also happens when resizing the time line zoom level.   This marvelous feature seems the most consistent way of trashing the application so I tend to leave it alone.
    I may be able to work for an hour or only a few minutes.  Sometimes deleting and re-adding an image seems to help, but that may not be true - most of the time it's just simply random.   The system has 14 Gig Ram and I am using iCleanMemory now to see how much is in play.  A crash / freeze may occur with a lot or a little - usually looks like I have about 8.9 Gig in play for normal use of Final Cut and no clear change when it crashes / freezes.
    Clearly the images are compatible - they are from Aperture and there is no consistency in always the same image being the issue.  
    Below is the first part of the error report dump. 
    Hoping someone has an idea for how to overcome this.
    Appreciate the thoughts.
    Cheers -
    Dan
    Process:         Final Cut Pro [1012]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.0 (179114)
    Build Info:      ProEditor-179110400~1
    App Item ID:     424389933
    App External ID: 3491984
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [202]
    Date/Time:       2011-08-17 17:57:45.775 -0600
    OS Version:      Mac OS X 10.7.1 (11B26)
    Report Version:  9
    Interval Since Last Report:          50891 sec
    Crashes Since Last Report:           1
    Per-App Interval Since Last Report:  2401 sec
    Per-App Crashes Since Last Report:   1
    Anonymous UUID:                      D1C2721F-974C-4845-BFD9-2EA572309772
    Crashed Thread:  17  CVDisplayLink
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x000000010371ed40
    VM Regions Near 0x10371ed40:
        IOKit                  00000001036ff000-0000000103700000 [    4K] rw-/rw- SM=ALI 
    --> MALLOC_TINY            0000000103700000-0000000103800000 [ 1024K] rw-/rwx SM=COW 
        MALLOC_SMALL           0000000103800000-0000000103885000 [  532K] rw-/rwx SM=ZER 
    Application Specific Information:
    objc[1012]: garbage collection is OFF

    Well, I filmed many of those videos in HDV (the 2x2 wall, the 5x5 wall and some of the 10x10 wall). Plus I converted the whole project to HDV because it is the way I displayed it (thru camera to Plasma TV's) and I wanted the HD space to work with and since part of my videos were HDV I figured that would be best.
    Of course the DV footage is not so good quality, but when made very small for that big screen it looks fine I think. Yeah the AIC codec is great but it takes 4 times as much room, but you think that would work better hey?
    I just don't want Final Cut crashing like that. I don't care if it can't play it back in real time or it takes 10 seconds to display 1 frame.
    I have not used motion....would it work for what I did. Remember I used over 100 discreet video streams I had. I don't want to replicate the same layer...you get the drift.
    Did you see it in youtubes HD? What did you think of the quality?

  • Export to Blu-ray from Final Cut Pro 7 with LG BE12LU30 External Blu-ray

    Hi all
    I've got an iMac with Snow Leopard and I'm editing HD video in Final Cut Pro 7. I've created AVCHD discs on DVD to play in my Blu-ray player but now I want to create Blu-rays that will play in a regular Blu-ray player.
    Has anyone got any experience of using the LG BE12LU30 External Blu-ray Re-Writer with FCP 7? I've checked other posts and it seems one user has had success with an earlier LG Model.
    Basically if I connect this drive and use the Final Cut Blu-ray export option in share, will I be able to burn a playable Blu-ray?
    Any help would be much appreciated!

    Hi I have one of those drives too .. I use FCP to edit export the movie using 'current settings' and then import that movie Compressor .. alternative I also have Toast with the Blu-Ray plugin .. it gives a nice menu template and works well. http://www.roxio.com/enu/products/toast/plugin/overview.html

  • Final Cut Pro sluggish with G-Speed drives

    We are having major problems with our Final Cut Pro system. We are running 6.01 on a dual 3.0 Ghz Intel with 8 gigs of ram. We have two G-Speed running of off SCSI. Whenever the scratch disk is set to one of the drives Final Cut Pro can barely open a project. Any ideas? I think we need to rebuild the system to truly troubleshoot this but if anyone has any advice that would be great.
    Thanks!

    With the G-Speed drives still mounted we tried running a job from the G-Raid that our client's project came in on and we had the same trouble we were having with the G-Speed. Since we are only working with DVCPROHD we thought it wouldn't be a problem but we still encountered a slow open.
    When we first started the project we copied the files from the G-Raid to the G-Speed drives. We then copied the project file to the desktop and first encountered a slow open.
    The project did open faster by accessing the project file from within the folder where the files were located on the G-Speed. For some reason that worked better.
    I will see if moving the thumbnail cache helps our FCP woes.

  • Final Cut Pro Compatability with OS 10.4 Tiger - Easy Question

    Right now I am cutting a feature film on Final Cut Pro 4.5 HD, OS Panther (10.3.9). As soon as I'm done with this project, I'd like to upgrade to OS 10.4 because I will be cutting a new feature in HDV (24p footage using HDVxDV to digitize and convert to DVCPRO HD).
    My question is this...does Final Cuto Pro 4.5 work in OS 10.4? Or do I HAVE TO get the Final Cut Pro 5 upgrade in order for FCP to work in Tiger?
    Thanks for the help.
    PowerMac G5, 2gHz, 2GB RAM   Mac OS X (10.3.9)   500 GB G-RAID x4, Canopus ADVC-110, Sony DSR-45
    G5   Mac OS X (10.3.9)  

    I switched because I wanted to use the MultiCam, plus for the integration with Shake (which I use extensively) and in the bigger picture, I wanted Motion 2 over Motion 1, so it made sense to upgrade to Final Cut Studio.
    But if you're looking for any BIG changes in the user interface or effects, etc, don't mess with your smooth functioning system. FCP 5 introduced a new RT system that causes interruptions in playback during shuttling when the mouse is moved and from general anecdotes is just not as smooth as in prior revs.
    For me, I'm happy I upgraded, but if it doesn't bring you any features you're looking for, you should probably stay with the system you're happy with.
    Patrick

  • Final Cut Pro 5 with OSX 10.5.8

    Will Final Cut Pro version 5 work with OSX 10.5.8?
    Thanks...

    As mentioned above, if your copy of FCS includes FCP 5.1.x you can update the included versions of Qmaster and Compressor to 2.3.1 via Software Update. Then, and +only then+, will everything work.
    If your FCS contains only FCP 5.0.x you will need to upgrade or stick with Mac OS X 10.4.
    Note that if you decide to upgrade FCS that the latest version is Intel only. You might be able to find a copy of FCS with FCP 5.1 or FCS 2 on ebay or similar.

  • What version of final cut pro works with ibook G4

    I recently installed Final Cut Pro 4 HD in my iBook G4. The install went well although the program hangs when it reaches the part when it searches for audio drivers. I'm a newbe to Mac so any help would be appreciated.

    https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions&tagSet=1100

  • Final Cut Pro - startup with fullscreen black monitor

    Hi,
    when I start Final Cut Pro I only get a fullscreen black monitor. Only the topnavigation shows up wehn I move the mouse to this area.
    regards
    arex-germany

    ... found it.
    The option "Digital Cinema Desctop Preview - Mainmonitor" was activated in the Menu "Anzeigen"

  • Why can't I purchase Final Cut Pro x with my iTunes card?

    I bought 3 iTunes cards ( $100 each = $300 total) to buy Final Cut Pro and for some reason the system is not letting me buy it

    Because it is $299.99, and there is tax.
    Cheers,
    GB

  • Any problems with Waves plug ins with Logic 8?

    Checking to see if anyone has used Waves plug in with Logic 8 yet and had any trouble.

    Only the same as in LP7. Maxx Bass and a couple of others fail the validation but still work.
    Ian

Maybe you are looking for

  • Document is alrady contains cleared items-reversal not possible

    Hi All, At the time of MIRO reversal we are getting error massage Document is already contains cleared items-reversal not possible actually one MIRO document using TDS line item and we make a payment for that TDS line item after that we try to reserv

  • How can I load a screen in a splitter control?

    Hello! How can I load a screen in a splitter control? g

  • Oracle Database Architecture Understanding

    Hello everyone, I am a newbie in Oracle arworld, and I want to learn ORACLE. A few months ago, I started to learn Oracle Database Architecture, and read a book. However, I forget much of that books after weeks ago, and read again forget again.. I cou

  • Need to Prepare Technical Specs

    Hi I have a scenario where i need to consume a webservice and need to expose webservice from PI . source is Non Sap System  and target system is NWBPM .for this scenario what all components do  i need to develop in SLD,ESR,ID flow is like this. Lara-

  • How to save etc/hosts

    Hi all, Please help sorting my terminal, I'm having problem with my iTune everytime I want to update or restore my ipad or iphone, it keep saying "this device isn't eligible for the requested build" Now I tried to edit the etc/hosts using the Termina