Final Cut Pro Flickering White Colors

I have video that was captured using a green screen with TriCaster. Because of poor lighting, the whites in the video are flickering and "noisy" while I'm editing in Final Cut Pro. Is there anyway to remove or cut down that flickering in Final Cut?

After upgrading from FCS2 to the current studio, All video placed in Final Cut Pro or Motion shows up as either black or white, sometimes with a few small color artifacts- as if the contrast had been turned up to maximum. This issue affects even the bars and tone generator in Final Cut Pro. Audio is unaffected.
I removed all installed files and receipts and reinstalled, issue is still occurring. I've also updated to 10.5.8 and run Final Cut under another user.
This issue is occurring on an iMac Intel Core 2 Duo. I have a fresh install on my Macbook Pro which is running without any issues.

Similar Messages

Whenever I press spacebar to playback my video project in final cut pro X, the color wheel pops up and freezes the computer. Doesn't matter what computer I use. Why and how do I fix this?

Like I said, I'm doing a simple video and have finally made some progress in editing. All of a sudden, when I try to replay the video the color wheel pops up and nothing works. It just keeps spinning and spinning with no end. I end up having to force quit the program. When I restart it the same thing happens. I've tried it on 3 different computers and the results have been the same. I've read that perhaps the software needs to be updated through the mac store, I did that to no avail. I also read that perhaps the preferences for the project/final cut pro need to be reset. I downloaded a program that is supposed to do this for me but it didn't work I also went into Preferences in Final Cut and hit reset under editing tab which also did not work. I"m really frustrated about this and I"m getting paid for this video. This needs to be resolved ASAP. Thanks in advance for the help: ask any questions.

Please give complete details of your system and the media and the project properties.

When opening Final Cut Pro it keeps getting stuck with the loading circle and I have to force the quit so please help?

I have a Macbook Air, still fairly new from July 4, 2014. Yesterday, I was editing some footage in Final Cut Pro, and the colored spinning circle kept popping up. I continuously forced the quit, as I couldn't do anything, and then I restarted and looked for updates (though there was none). I then deleted the app and reinstalled it, but it's still giving me the same problem. This morning, I created a new user account, and Final Cut Pro works on that account, but it took some time to find the exported video (I actually had to turn it off and turn it back on to find the video). Later today, I went onto the main account, where Final Cut Pro isn't working, and it's still giving me trouble, and then the Picture Preview program got stuck, as well, twice, where I had to also force it to quit. What's happening? How do I fix this problem?

The info given below might help but if it doesn't, I'm sure other people will give you useful suggestions.
Corrupt preferences can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be one of the first things you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.

Emoji appear as black and white in Final Cut Pro X

Using the Character Viewer in OSX Mavericks, I was able to put some colorful emoji into one of my films in FCPX.
I moved the project to a new computer and now the emoji will only show up in black and white! I can't adjust the colors or the font settings, or anything to get the emoji to appear in color again!
Same project, different computer, different emoji. I have looked across my settings and preferences and I can't figure out why this is happening. Anyone else have any suggestions or experiences here?
Thanks,
Justin
http://youtube.com/justinslinks

Yes - thanks, good question Tom. I have Apple Color Emoji installed and active. I was just able to drag a full-color emoji into iMessages.
When I drag an emoji into a text-line in Final Cut Pro, I get the emoji looking regular in color in the inspector, but the emoji is grayscale in the previewer :-/ Here's a picture:

Fade Out to White in Final Cut Pro (FCP)

Could someone please show me how to do add a fade-to-white transition in Final Cut Pro (FCP)? (Instead of black, which is default.) I want to be able to do both: 1) fade to white; 2) and white to the picture. An example clip:
http://www.allfilters.com/campingfilters/gravityfed/platypus-gravityworks-filter
*Click on the "Videos" tab.
This clip ends with "fade to white." I want to apply the same effect in the beginning (white to movie).
Thank you in advance.

Effects > Video Transitions > Dissolve> Dip to Color Dissolve ... add it at the start and end
Double click the transition at the start (the Fade In) to open it in the Viewer and change the Color property to White. For extra credit you can change the Start value to 50%. Then double click the transition at the end (the Fade Out) to open it in the Viewer and again change the Color property to White. For extra credit change the End value to 50%.
Or another way would be to use Effects > Video Generators > Matte > Color Solid to create a "White" clip and then use that to dissolve into and out of your edit using a regular Cross Dissolve transition or by placing the Color Solid on another layer and the keyframing the opacity.
Hope it helps
Andy

How to change the white balance in Final Cut Pro?

What is the best way to change the white balance in Final Cut Pro? I have some clips which are to green. I would like if possible something which might resemble the Camera Raw dialogue in Photoshop. Any way of measuring color (RGB values)?

There is some specific help in this trainng book:
http://www.amazon.com/Apple-Pro-Training-Correction-Studio/dp/0321635280/
When using Color Corrector 3-Way to correct for a green tint, the bullet points are something like this:
1) After loading the clip into the Viewer and applying the CC3W filter to the clip, open your scopes and move the window so you can see the Viewer (with the CC3W tab open) and the scopes
2) First, if necessary, adjust the white and black levels using the video level sliders below the white and black color wheels (I use the slider above the scopes to make the trace in th4 scopes as bright as it will go without blooming)
3) Looking at the Parade scope, the idea is to balance the whites, mids, and blacks on each color display (red, green and blue). So you watch the Parade and drag the dot that is in the center of each color wheel (starting with the whites) away from the color of your tint (in your case, green). Drag the dot until the highest portions in all three Parade displays are as even as you can make them
4) Then do the same with the mids, using the Mids color wheel, moving its dot away from green
5) Do the same thing with the blacks
6) Double check the image on an external video display that is properly adjusted using color bars from Final Cut
NOTE: This short reply is not sufficient to fully explain this technique, and you really need to understand Color Theory before doing this anyway. That's why I recommended the training book.

Final Cut Pro 7 Master Templates are white!

I can't get Master Templates working in FCP 7. I see the templates if I browse them, I can load them up in Motion no problem. But if I try and view them in the viewer, or add them to the timeline, they come up white. I have uninstalled and reinstalled FCP 7 3 times today now, and can't seem to figure out why this feature doesn't work. I've trashed preferences, everything I can think of. Anyone else having this issue?

After upgrading from FCS2 to the current studio, All video placed in Final Cut Pro or Motion shows up as either black or white, sometimes with a few small color artifacts- as if the contrast had been turned up to maximum. This issue affects even the bars and tone generator in Final Cut Pro. Audio is unaffected.
I removed all installed files and receipts and reinstalled, issue is still occurring. I've also updated to 10.5.8 and run Final Cut under another user.
This issue is occurring on an iMac Intel Core 2 Duo. I have a fresh install on my Macbook Pro which is running without any issues.

I have been using Final Cut pro v6 without any problems but recently had to reinstall. Since then I can't open and view all my Quicktime clips. They appear white in timeline which means you can hear audio but not view picture. Any tips?

I have been using Final Cut Pro without any problems - v6 - for ages. I recently had a hardware issue and had to reinstall the software. Since then I can't open most of my QT clips in my fcp project. They appear as white clips - audio only no pictures. There are a few QT clips you can view as regular thumbnail images and they play ok. What's the issue? I have fcp v6.0.6 and QT v7. Any thoughts on what to do next?

Yes I did software updates which updated fcp to 6.0.6 and QT to version 7.7. That's as far as updates have taken me although i have requested daily updates. I forgot to say the clips don't play in QT view either. Again sound but no pictures when they are played.

Final Cut Pro - Two Video Cards - Display Turns White

MacPro Xeon 2.0GHz
3 Gig Ram
Two nVidia 7300 Video Cards
Two CRT Monitors and One HDTV
I have two CRT monitors attached to my original nVidia card. I recently installed a second video card and attached a third monitor to my DVI output (on the second video card)
I tell Final Cut Pro to display video on third monitor as full screen output. I can see my 720p (or 480p) display. When I press play, the entire screen turns White. (I've tried a CRT monitor, and my LCD HDTV via HDMI to DVI).
If I remove my Right CRT monitor from my graphics card and attach my HDTV (giving me one monitor and one HDTV) I can get full screen 720p play back. But I don't want to edit with one monitor! I am wanting to have my two monitor editing setup with the third monitor as my full screen display (720p).
Why does three monitors result in a white frame for playback? Do I need to configure something?
Help!

#15 White or Black Canvas
Shane's Stock Answer #15:
Make sure the canvas or viewer are selected then go to VIEW>CHANNELS and set it to RGB. It might be set to ALPHA.
Shane

How to show each color channel image of a video on Final Cut Pro X

Hi, Sir,
How to show each color channel (R or G or B) image of a video on Final Cut Pro X? I found this feature is useful for the image quality editing, such as the noise reduction.

Do you mean this?

I just updated to new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. when it comes back to tcp x it's black.

I just updated to the new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. When i send a sample to MBL and color grade it , it comes back to final cut pro x all black even after render. By the way on the MBL i am using the GPU rendering, I used before like 4months ago and it was fine. And i don't like to use the CPU because it very slow.

What is the frame rate of the project? At what frame rate was the media recorded? What frame size?
What are the audio settings?
What are the specs of the machine, in particular how much RAM, how is the hard drive connected, etc.?
If possible, post screenshots of the inspector for the project.
It could be related to the audio frequency?

Send to Final Cut Pro in Color off an external Hard Drive, causes Color to Crash

Okay, so I'm having some Color issues guys...
I'm color correcting a feature right now, and just completed the CC with Color. I did the entire color correct on an internal hard drive on a Mac Pro. My client wanted to take a look at the CC on a different machine, so I transferred all of the FCP files, Color Projects, footage, etc. (the ENTIRE directory from my machine) onto an external hard drive....
...When I opened the color project from the external drive on his machine, all of my media was gone, so of course I reconnected the media (directly from the source, the same source files I edited with in FCP), and everything was fine. My grades were there, and everything looked great....
....I rendered my Color sequence and tried to Send To Final Cut Pro, and color crashed on me. It continued to do this....
....I went back to my machine and tried to Send To Final Cut Pro, and everything worked just fine. What went wrong with the data transfer? Is that the reason Color keeps crashing? Is it because I relinked the footage in Color to the original source files? It doesn't make sense to me. All of the data from the original drive was moved to an external and relinked.
I'm pretty new to Color so any help would be appreciated. Thanks so much!
-Chris

Copy the original project and media to the external drive using Media Manager. It will maintain the links.
x

How do I make a pic in final cut Pro stop flickering?

how do I make a pic in final cut Pro stop flickering?

Question: how do I make a pic in final cut Pro stop flickering?
Answer: It depends on what is causing the flickering. It could be due to the pixel dimensions being too large for the Sequence settings in FCP. It could be due to thin horizontal lines in the image. It could be due to areas of the image in high contrast with each other. Or it could be due to a combination of several factors.
If the image is too large, reduce the pixel dimensions to a more reasonable size.
If it's due to thin horizontal lines, deinterlace the image, or slightly blur the lines in Photoshop.
If it's due to areas of high contrrast, reduce the contrast of those areas in Photoshop.
In FCP you can also try applying the Flicker filter to the image in the Timeline and/or a Gaussian blur filter with a setting of around 0.2 or 0.3
-DH

Final Cut Pro color problem

So I just got myself a new 24' LED monitor for my home edit suite, and I have been very pleased with it. I just happened to open FCP to see adjust my workspace for the bigger setup, and I noticed a strange problem. In FCP, the viewer and the canvas look very dark, like the brightness is turned down. It also looks that way on my laptop monitor, which has always been my second edit monitor.
However, my project exports look nothing like that on the same monitor. I thought perhaps the monitor wasn't calibrated properly, but the Quicktimes look fine. I've attached a screen shot of the problem. The image on top is the Quicktime, and the image on the bottom is the FCP canvas. What's happened to my FCP? Is it some sort of color profile or does it have to do with the resolution? Is it a FCP setting or a monitor setting? I don't understand why it changed how it looked on my laptop monitor, since nothing changed with it. Any insight would be fantastic!
Thanks

I believe this is the difference between broadcast gamma output via something like a AJA KONA card and a regular monitor gamma. Go into Final Cut Pro- System Settings and select the Playback control tab. Change the Gamma Correction from "Accurate" to "Approximate"
When you reset this you can then start to calibrate your monitor. Without that gamma setting changed you can crank all of your monitor settings to maximun brightness and you'll never ever see the pluge on your color bars.
Good Luck,
je

Trouble with the round trip from Color to Final Cut Pro

I have edited a home movie together. I then have sent the sequence to Color for grading and then after completing the Color changes and Rendering. I sent it back to Final Cut Pro. It starts out working fine but during the transfer process it stops at somewhere between 50% and 60%. It is during the "Importing XML Data" phase. It just sits there and does not change and I have to force quit to get out of it. The exact same thing happens when I try to round trip from Soundtrack Pro 2 back to Final Cut Pro. So I am unable to make use of the changes I make in these programs.
This is a round trip process that I have successfully made many times before. Nothing has changed. I am working in Final Cut Studio 2 with the latest updates on an Intel Mac. Any advice on how to remedy this situation would be greatly appreciated.
Thank you in advance.

Hard to say where the XML interpretation is getting lost... That it stalls at 60% could mean a number of things. If you have a cuts and dissolves simple timeline, that should not be an issue. Something is causing a corruption, though and it could be a media type, a filename (which can break folder paths), a filter or motion tab which generates an invalid value, or a recompression that violates the sequence settings.
At this point, I start cutting up the original sequence and roundtripping it until it works, or breaks and then try to figure out what's different. Often there's something hidden like an imbedded recompressor in a nested sequence or something like that, that will allow COLOR will load, grade, render, and then not know what to do to re-write the export XML, or re-imbed it illegally.
There are a lot of things that FCP does that editors take for granted that COLOR utterly cannot cope with -- but may deceptively carry along and then crash on the next step.
jPo

Final Cut Pro Flickering White Colors

Similar Messages

Maybe you are looking for