FINAL CUT PRO - HDMI OUT

im setting up an FCP system at home.
planning to use 2 displays for interface and a 42inch HDMI monitor for program.
is the APPLE TV box capable of displaying full res HD straight from Final Cut Pro and/or AFTER EFFECTS?
otherwise, i would just get the BLACKMAGIC INTENSITY PRO HDMI card.
any other suggestions would be greatly appreciated.

Second the Thumbs up for the Intensity Pro!!
A great feature is the ability to capture from analogue sources too.
Never know when a client is going to turn up with a VHS tape!!

Similar Messages

  • Final Cut Pro Error: 'out of memory'/'general error' on export

    I'm trying to export a simple timeline from FCP but keep getting Final Cut Pro Error: 'out of memory'/'general error'. Exporting 5 sec timeline (yes, just a short trailer) via Quicktime conversion H264 at 1080. Strangely, if I export exactly same timeline at 720 its fine. Original media ProRes422 1080.
    Have exported at 1080 before ok. No nested files involved; re-connected all media; no JPEGs involved; plenty of memory (all of which i have heard can be issues).
    Any advice please as i've read all of the FAQs and nothing helping so far?!
    Spec: New MacPro 12-core; 12 MB ram; 2TB drive; FCP7

    Thanks for workflow clarity Shane, but when you export as self-contained QT movie, what do the 'Current Settings' refer to? Is this the current settings of your (source media in) timeline (ie in my case Pro Res 422) or the last settings used by the export? Apparently 'If you deselect the Recompress All Frames option and choose Current Settings from the Setting pop-up menu, Final Cut Pro simply copies frames from existing media files into the new file with no recompression.' But when i did this I got a 994.1 MB QT movie, which, when i got 'more info' told me MPEG-2 Video (?!) Apparently a compressed file when its supposed to be uncompressed (?!) When i exported manually setting to Pro Res I got 6.77 GB. Clearly uncompressed Apple ProRes 422 (HQ). Do i have to manually set settings to Pro Res to match my source media and ensure i get an uncompressed file? Im searching boards to get some clarity on this too: all references so far advise using 'current settings' but dont actually say what they are.

  • Final Cut Pro 6 - 'Out of Memory/Error Code'

    Hey All,
    I'm in the final stages of editing a documentary and I keep running into an 'Out of Memory' error code in Final Cut Pro 6.0 when trying to export a reference file. The finished film is 81 minutes long and contains 19 sequences. I have all 19 sequences nested in a main sequence of a seperate FCP project file, so I'm not wasting any memory on clips or additional backups of sequences. This Nested sequence is the only sequence that exists in this 'other' project file. All of the photos used are under 4k resolution and are RGB. Even the lower thirds are animation QT's with alphas. Any thoughs would be greatly appreciated.
    Nick
    System Specs:
    Quad-Core 2GHZ MacBook Pro
    4GB DDR3 Memory
    MAC 10.7.2 (Lion)
    FCP v6.0.6

    First troubleshooting step
    https://discussions.apple.com/docs/DOC-2491
    If that doesn't solve the problem, you may have a corrupt sequence
    Try creating a new sequence with the same settings and copy the contents from the problematic sequence
    If that doesn't work.  Mark an in and an out for the first half of the sequence and do an export.  If that works, mark an in and an out for the second half and export.  Keep narrowing down the sections til you find the problematic clip. 

  • I want purchase Final Cut Pro come out can't installed on Macintosh HD

    Hi,
    I need your help I want to purchase Final Cut Pro for my iMac 21" OSX 10.9.5, 31 GHz i7,16 GB and NVIDIA GT 750M 1024 MB when I try to install come out Final Cut can't be installed on Macintosh HD because OS X version 10.10.2 or later is required.
    1.Is mean I have to upgrade to OS X Yosemite?
    2.I done do partition? but I know how much size just half and half total 1 TB so 50% and 50%
    3.I have Final Cut Pro Trial,i have to deleted or ..,
    please any suggestion?.Thank you.
      regard
    Made Taruna

    Hi Russ H,
    Thank You for time to reply my previous question.
    so You mean I have download and installed OS X Yosemite first on my iMac to run a dual boot system.
    I did make partition,I follow tutorial:larryjordan.com/articles/create-a-dual-boot-mac-os-x-system when I try purchase and install from App store come out massage:''Final Cut can't be installed on Macintosh HD because OS X version 10.10.2 or later is required.''so Should I do..?,Thank you.
    Thank you for answer,question no 3.
    note: I make back up file already for on external G-Drive.

  • Final Cut Pro HD out of memory

    In Final Cut Pro HD, when I click on a sequenze I'll get an 'out of memory' message. My computer has 935MB of unused RAM.
    Anything I can do?

    Welcome to the forum Martin,
    Very often this message pops up when there is some sort of corruption in the sequence/project...a clip, a render or the sequence itself.
    Couple of ways to try determining what it is...
    -if your media is on an external drive, disconnect the drive properly, which will disassociate the media from the project, then bring the drive back on-line and re-connect media.
    -delete all renders for this sequence using Render Manager, re-render and see if it works.
    -copy all media in the timeline and paste it in a new one.
    If these don't work, you could try creating a new user account (with admin privileges) and try opening it from there, or create a new sequence in this user, and paste the media there.
    Hope that made sense, but this usually has nothing to do with your physical system RAM.
    Try these and post back if any of it works, or you need more help.
    I'm certain others will chime in as well
    Kevan

  • Can't Install: Final Cut Pro GREYED OUT... and no ProMediaIO.pkg file. ??

    Yes, I already have Logic Installed. And, yes, I've read ALL the other posts I can find... but I don't HAVE a ProMediaIO.pkg file ANY WHERE in my system. And I KNOW how to find these things
    This is maddening, and absolutely embarrassing that Apple hasn't provided a fix for this. It seems that a TON of people are having this exact same issue, but nothing I can find to solve this.
    And NO, using Pacifist to hack into the file doesn't count... although I guess I'll do it if I have to :P
    Any hints? Help?
    tx,
    e

    What Tom said.
    Alternatively, you may control-click the application and choose "Open" - this should present a dialog warning but allow you to proceed.
    This should only be necessary each time you start a given application *for the first time*. In the future, a mere double-click or any other standard method of starting the application will work.

  • Mini-Dvi to Video out from Final Cut Pro working

    Thanx Everybody for posting reply for my post regarding running video out to external TV from Final Cut Pro in MacBook.
    It's working fine.

    @ Studio X : The files were originally created with Final Cut Pro, rendered out to QuickTime, then are being played back with Final Cut Pro. The file that has the most noticable studdering is a 60-minute timeline sequence in Final Cut. All files are being stored and played back from the Mac Mini's internal hard drive. Everything was originally shot on DV and formatted for a 4:3 aspect ratio.
    @ Shane Ross : Are there any settings in the MacOS or FCP where I can improve the HDMI video signal? Or do you know of / have any experience with Firewire to HDMI converters? Unfortunately, my new signal path relies on HDMI from the video playback.
    My current setup uses the Firewire output, which is then converted to composite video & analog audio using a pair of ageing DV tape decks. That setup is becoming troublesome due to age.

  • Video playback from Final Cut Pro studders over HDMI

    I have a problem playing back video from FCP. The video output will studder during horizontal pans when I output via HDMI. The audio output is not affected.
    I have been playing video successfully using FireWire for output in FCP, however, my new video switcher system will not support FireWire output.
    What are some possible causes of this problem?
    System stats:
    * Mac Mini (2010 model)
    * 8GB RAM
    * OS X 10.6.4 (Snow Leopard)
    * Final Cut Pro 7.0.3 (Final Cut Studio 3)

    @ Studio X : The files were originally created with Final Cut Pro, rendered out to QuickTime, then are being played back with Final Cut Pro. The file that has the most noticable studdering is a 60-minute timeline sequence in Final Cut. All files are being stored and played back from the Mac Mini's internal hard drive. Everything was originally shot on DV and formatted for a 4:3 aspect ratio.
    @ Shane Ross : Are there any settings in the MacOS or FCP where I can improve the HDMI video signal? Or do you know of / have any experience with Firewire to HDMI converters? Unfortunately, my new signal path relies on HDMI from the video playback.
    My current setup uses the Firewire output, which is then converted to composite video & analog audio using a pair of ageing DV tape decks. That setup is becoming troublesome due to age.

  • Mac Pro Dual Core (pre 2009) - Leopard to Snow Leopard and Final Cut Pro 7

    I have a pre 2009 Mac Pro running Leopard and Final Cut Pro 6. My question is should I upgrade to Snow Leopard, and Final Cut Pro 7? Both, neither, just one of them... and in what order?
    I am afraid of some of the issues people have been discussing (one website even said with a non intel based system neither updates can be done, but I have Intel Xeon processor)
    Any help is highly appreciated. Thanks kindly

    Your macpro will run Snow Leopard and FCut 7 just fine. There are plenty of "whats new in Final Cut Pro" tutorials out there to research and learn whether the new things are useful to you. Snow Leopard...plenty have had issues with it. As always, it's best to have a full mirror backup before you update to Snow Leopard so if you do have problems you can go back easily. I'd definitely move to 10.5.8 if not SLeopard. I have a PCIe card that won't work with SL so I'm holding off till I install a new card. There are still some incompatibilties known so you may want to check Apple's list.

  • Preview out in Final Cut Pro 6, doesnt seem to be working

    I have a cilent coming over in a few hours and im having some issues getting the preview out from my computer to my TV to work. I refreshed everything, and its set to "All Frames" but all i seem to be getting is a black screen.

    its DV format, We are running it though a JVC Deck VIA Firewire. It has worked with Final Cut Pro 5 and up but 6 seems to be an issue, Nothing has changed but the software

  • I export from final cut pro 7 to idvd everything comes out fuzzy on the dvd

    I film using a canon fs10. I edit in final cut pro 7, then export to quicktime format, then I burn the dvd using idvd. But the final product always comes out blurry and fuzzy. I can't see what I am doing wrong. Is it because I am not filming in HD?

    Using iMovie, for one, is capturing your files to a codec other than one FCP wants to work with. You would be better off dragging and dropping the files from the camera to a folder on an external drive and converting the footage with MPEG Streamclip to whatever codec you want to work in.
    Using iDVD to compress and author the dvd takes away any control you have over the compression settings for the project.
    You'd be well off getting a FCP training book from someplace like Peachpit Press, or a training dvd from someone here or out there who produces them.

  • I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot

    I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot go back to the project at all.

    If you are using 10.0.3 or above Apple added a backups folder that for a little extra protection in cases like this. If you quite FCPX go to your Final Cut Pro Projects folder. Find the folder that has the project in question. If it has a backups folder there should be a file with a date stamp and .fcpproject extention, that is your back-up. Just move the back-up from that folder one folder up to the place where you deleted CurrentVersion.fcpproject from.  When I have had to do this I haven't renamed the backup but some people to recomend that you rename it to CurrentVersion.fcpproject and it seems to work both ways. Ofcourse it wont work if there is already a CurrenVersion file there you will need to delete that one first.
    If you don't have the backups folder or there is nothing in it I am not sure if there is anything that can be done.

  • I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it.  I need the videos out of there.  I have tried every way I can think of.

    Like the title says...
    I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it.  I need the videos out of there.  I have tried every way I can think of.
    I have also tried from the iphoto side, to export the videos or share them to final cut.  I have had no luck.
    I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
    I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible.  I see this on forums and youtube videos of the older versions.
    However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
    Thank You for the Help

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • I want to use my macBook Pro 2,2 (mid 2007) to display video being fed from a Canon 5D video out into the vectorscope in Final Cut Pro 7.0.3.  Is it possible to input live video from another digital camera into the MacBookPro

    I know that the built in iSight camera records video.  I want to set up a Canon 5D video camera and feed the Canon's video output into the MacBook Pro so that I can use the vectorscope in Final Cut Pro to adjust the exposure of the Canon 5D.  Basically I don't want to buy a vectorscope to have on set to make sure the picture is properly exposed and color balance is correct. (In your response it doesn't have to be the full scenario I've described.  If you can just tell me if there's a way to feed live video into the MacBook and display it on the screen and possibly record it, then I'll figure out the rest.)

    Dear Ben,
    Thanks for your help. Apple and I dealt with this. It was an FCP, NOT Motion problem. As It seems you understand, we simply trashed my FCP prefs. Problem went right away.
    Thanks. Do you live near Hammond? Played in a rugby tournment down there once. I was transformed.
    MS

  • I can't get my projects in Final Cut Pro X to work in 1080p. One turned out to be 1080p but I did everything the same as the ones that did not.  ***?  Any ideas?

    I can't get my projects in Final Cut Pro X to work in 1080p. One turned out to be 1080p by "accident" but I did everything the same as the ones that did not. Same camera/settings (shot in 60i).  I didn't really care cause I had to get some stuff done, but now I know I "can" dp them in HD but can't figure why the one went up to YT in full HD (and made a copy in my movies folder.  That one project acted totally different than the other 5 but I didn't change anything.  Can't get it to work again. ***?  Any ideas?

    No problem! If you're worried about more complicated edits (which in all honesty, should work no matter how many clips you select or how many effects are attached to them), you can always compound a clip first, and then copy it over after if you're afraid of lots of track clutter getting in the way. Not sure if they would break apart afterwards though if you wanted them to.

Maybe you are looking for