Final Cut Pro installed on an image interfearing with multiple LDAP Binds??
Hi guys, have an issue here a bit different from anything I have been able to find concerning binding to LDAP.
The situation is this: I am tasked with administering about 90 iMac's and 3 xServes in 3 labs in our school district. 30 of these machines have Final Cut Pro installed. Therefore I have 2 images created and successfully served by one of our xServes. The other xServe is didicated to Open Directory, and the 3rd is just a file share server. The non Final Cut Images have been applied and bound to LDAP and AD successfully, however, when it come sto the images WITH Final Cut Pro, I was only able to bind one machine to LDAP. The remainig machines tell me that the object allready exists (which it should not because these are all new machines and have never been bound, imaged, or configured in any way prior to this) and it gives me the option to "Overwrite". When I choose overwrite, it creates the machine in Workgroup Manager, but never bindes the machine to LDAP and gives me an "Unknown Error".
Now it seems to me, that this is a problem specific to Final Cut Pro. What do you guys suggest?
It is worth mentioning that we do have a vollume license for FC Pro and it is the default installation with no modifacations made to the install configuration.
I have also posted this issue in the xServe forums.
Look here - http://www.apple.com/universal/crossgrade/
And remember "Search" is your friend. This topic has been discussed ad nauseum on this forum.
K
Similar Messages
-
After a failed install my mac thinks I have final cut pro installed.
I tried installing Final Cut Studio and halfway through it I accidentally hit the cancel install button when it asked me for a disk to continue the install. No bid deal, I'll just run the install again, right? Wrong, the second time around it only gives me the option to "Upgrade" Final Cut Pro. So my comp thinks I have Final Cut Pro installed already. I used Appdelete to toss all of the half installed software, but apparently there must be something on my comp still because the installer only offers the upgrade. What do I do? Thanks everyone.
Look in Hard Drive/Library/Receipts.
Remove all .pkg files that refer to FCP.
Those files are the reason your computer thinks FCP is installed. -
Our church used an HP for 12 years that was refurbished and finally died. We captured Sunday services for broadcast using Avid Express connected to a Broadcast Pix Switcher via an Avid Mojo with a firewire cable. This week, I replaced it the HP with a Mac in hopes of using Final Cut Pro to capture and edit video for broadcast. Will Final Cut Pro X recognize Avid Mojo interfacing with Broadcast Pix? If so, how do I accomplish this? Currently I have the mojo connected to the Mac via a firewire adapter through the thunderbolt port. However, the Mac isn't seeing the mojo or the cameras connected to the switcher.
Just turned off background rendering.
I'm not certain what you mean for specs in a specific point in the video, but here are the specs for the entire edit I initially received:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,083
Size: 951,735,770 bytes (951.7 MB on disk)
Here are the specs for the exported video that has the audio issue:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,274
Size: 966,817,082 bytes (966.8 MB on disk)
The video is 10:28 minutes long and the audio leaves at 5:57.
If that wasn't what you were looking for, just let me know. I'm not very good with technical stuff sometimes so may have misunderstood.
Is there something I should have done to the piece before I began color correcting it, like transcoding? -
Can I have two versions of Final Cut Pro installed on my Mac
It is posible to have Final Cut Pro 7 & FCP X installed on my Mac Pro.. currently I'm using FCP 7,
Yes.
Final Cut Pro 7 and the other FCS apps will be moved to a subfolder in your Applications directory. -
I purchased and installed Final Cut Pro X, Motion and Compressor on my MacBook Pro. However, when I open the App Store app Final Cut Pro is listed as "install" while Motion and Compressor are listed as "installed." This semantic difference between "install" and "installed" only becomes and issue if I click the "install" button for Final Cut I see a message box that states: "Final Cut Pro 10.0 is already installed and was not purchased from the Mac App Store -- Do you want to by Final Cut Pro 10.0 again?"
My question is: Will this issue affect the updateing of Final Cut Pro through the App Store? Has anyone else experieneced this issue?Well it is what it says : FC X was not purchased with the Apple ID that you use to sign in to AppStore unlike the other apps. It has been downloaded from some other Mac and then copied to your Harddisk. This will affect future updates from MAS, but not the capabilities of the app ( FC X ).
Try using the Apple ID that was used for purchasing FC X originally. If you are the owner you should know how it came on the Mac and what credentials were used .. -
Final Cut Pro X export troubles: exports video with only half the audio.
Ever since I updated Final Cut Pro X, I've been having problems exporting. I either get error messages or the audio doesn't fully export. When I tried exporting a master file to my desktop, I got a message saying “error occurred when creating frame” then lists the frame number. Someone suggested copying the project file and pasting it into a new project. I did that, and it exported without the error popping up; but halfway through the video, the audio disappears, and does so in the same spot it disappeared in a previous youtube export before I tried the copy/paste method. I don't have the original footage; I'm making color correction changes to an edit; so I'm not sure if the second half of the video is somehow corrupted, don't know how to check that, and not sure what to do if it is.
Another suggestion given to me was to delete the event my footage is in, then create a new event, re-upload all the footage into that one, and relink my project files to it. He also said don't delete my event and project folder at the same time, which I'm not even sure how you simultaneously delete two things on a laptop. I don't understand how this method would work though, since deleting the event makes my project disappear since it has nothing to link to. I'm scared to try this method since I don't want to lose my work; I really don't want to color correct it all over again.
Is there any way to successfully export the file suitable for youtube posting, or is this a bug in the system they haven't fixed yet?Just turned off background rendering.
I'm not certain what you mean for specs in a specific point in the video, but here are the specs for the entire edit I initially received:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,083
Size: 951,735,770 bytes (951.7 MB on disk)
Here are the specs for the exported video that has the audio issue:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,274
Size: 966,817,082 bytes (966.8 MB on disk)
The video is 10:28 minutes long and the audio leaves at 5:57.
If that wasn't what you were looking for, just let me know. I'm not very good with technical stuff sometimes so may have misunderstood.
Is there something I should have done to the piece before I began color correcting it, like transcoding? -
HT4775 Final cut pro tab share does not work with mountain lion V10.8
I have upgraded to mountain lion and since than the tab share in final cut pro X is not working anymore.
Any suggestions??? ThanksTrash preferences and repair permissions in Disk Utility.
If that doesn't free Share up I'd drag app to trash, reinstall it and run repair permissions again.
Good luck.
Russ
BTW, not that it matters a lot, but this is the Compressor forum. -
From an online survey I'm pessimistic.
Final Cut studio sold on Ebay is an installation set of discs.
The only thing that is ever downloaded relating to final cut are incremental updates direct from Apple via Software Update in the Apple menu. -
Final Cut Pro X - Create Archive not working with Yosemite!
Just upgraded my laptop to Yosemite and now I can't create any camera archives. I am not sure if it is my laptop or Yosemite that is causing the issue. I tried creating a camera archive with the same SD card on another machine (running Mavericks) and it worked fine. Anyone else having similar issues?
Oddly, still no luck. i was hoping to find something in the logs but FCPX keeps pretty quiet. My goal was to see if this feature was broken but since it is working for others, I will close this question.
Thanks -
Final Cut Pro X not opening some bundles with Yosemite
FCPX starts up, some bundles will open but not load media, others will not open at all, just spinning beach ball, have to force quit! Anyone else seeing this? I'm running latest of everything. Thank goodness I did a SuperDuper backup last night so I can use my clone.
FCPX starts up, some bundles will open but not load media, others will not open at all, just spinning beach ball, have to force quit! Anyone else seeing this? I'm running latest of everything. Thank goodness I did a SuperDuper backup last night so I can use my clone.
-
I am thinking of swapping to FInal Cut Pro X. Can I get away with buying a 2010 Mac Pro to use?
Would you recommend eight or twelve cores? Is the speed that important? How much memory? I read so much conflicting information. Sites that say anything over eight cores isn't worth it. Or you should only use six outof the eight memory slots. Or a single 3.33 quad core is better than 2.4 with eight cores.
I will be editing 1920x1080 60p either 35Mbps MPEG4 or 28Mbps AVCHD. Typically a single camera. Sometimes a multi camera shot.
I thought I would ask the Apple forum. I have read the minimum requirements for the software. But I know it is better to talk to people that actually use the product.For what your editing and with only a single avchd camera, I would go for fewer cores and a higher cpu.
A 12 core would be overkill and would probably give you slower performance in tasks not directly related to export rendering.
A 4 core 3.33 quad core is absolutely faster than a 8 or even 12 core 2.4 in all tasks that don't use many cores. And Most tasks don't. But if given a choice, I prefer a six or eight core rather than a 4 core and would recommend enough memory and the highest cpu you could afford.
16 gigs or more of memory should be good and remember the graphics card. FCP X really takes advantage of the newer OpenCL cards that were recently released for Mac from ATI and Nvidia. -
I am trying to install final cut pro 6 onto my mac but a message keeps coming up saying its doesnt support a powerpc, anyone have any tips please?
If you have an Intel Mac and have recently upgraded to Lion or Mountain Lion; here is a post I made in another similar thread:
I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between Final Cut Pro or Lion/Mt. Lion;
3. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the screen from your other Mac to view and work FCP in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCP (such as FCP X) and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization. -
Can't launch Final Cut Pro 7 on Snow Leopard
Guys,
I have succesfully installed FCP on my MacBook but anytime I start it I get the following error:
Process: Final Cut Pro [3227]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: ??? (???)
Build Info: FCPApp-906181654~22
Code Type: X86 (Native)
Parent Process: launchd [82]
Date/Time: 2010-07-03 16:06:05.310 +0200
OS Version: Mac OS X 10.6.4 (10F569)
Report Version: 6
Interval Since Last Report: 332243 sec
Crashes Since Last Report: 15
Per-App Crashes Since Last Report: 11
Anonymous UUID: A669B700-2A79-46C5-8E92-0030869EA871
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
Referenced from: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Reason: no suitable image found. Did find:
/System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit: unknown file type, first eight bytes: 0x31 0xED 0x25 0xF2 0x20 0x3E 0xDD 0x0F
Model: MacBook5,2, BootROM MB52.0088.B06, 2 processors, Intel Core 2 Duo, 2.13 GHz, 2 GB, SMC 1.38f5
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.3f8, 2 service, 19 devices, 1 incoming serial ports
Serial ATA Device: ST9500325AS, 465,76 GB
Serial ATA Device: HL-DT-ST DVDRW GS22N, 7,24 GB
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0x24400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x022a, 0x04600000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: USB MFP, 0x04b8 (Seiko Epson Corp.), 0x0818, 0x04100000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000
Does anyone know a solution for this?
Thanks for your helpUpgraded the OS? This is usually an installation issue. There is an easy fix. Do a forum search for ProKit.
-
Hi, I still have problems reinstalling Final Cut Pro even though I followed these steps.
Reason why I have to reinstall is because I have repaired my Macbook Pro hard drive at a Mac Authorized Repair.
Short history of repair and my Final Cut Pro installation:
1. Macbook Pro stopped working, sendt it for repair. Had the Final Cut Pro installed,
2. Desided to try a MiniMac and recovered my backup with Time Machine, got the Final Cut Pro working.
3. Got my Macbook Pro back from repair, did backup on this one as well. But this time only the files not the Applications.
4. Removed the files as mentioned in HT5149. Didn´t find "com.apple.motionapp.plist" to remove though, but the others I found.
5. When I try to install Final Cut Pro from App Store, it downloads the application as planned. But after download it won´t show in the Application folder nor in the downloads folder, nor will it start an installation prosess. If I pause the installation in App Store, I can see the Final Cut Pro icon in my Dock. (But, as mentioned, after installation it won´t show neither here or in the Applications folder).
Any suggestions on what I should try now?
Thanks for any reply, I´m in deep water here...Sounds like there is a file you're not getting. Never do a removal manually. It's so time consuming and a pain. There's a very easy and fast way to do this, safely, properly.
Get the free "Final Cut Remover" app from Digital Rebellion (dot com), use this to remove FCP X.
Reboot the Mac.
Download from scratch.
If you're not seeing FCP X in your app folder, run Disk Utility to Repair all drives.
If that doesn't help, try running Disk Warrior from Altsoft to repair the directories on all drives. -
I removed a movie I had made and now when I try to open final cut pro, all the stuff shows up with the names, etc, but that is it, I don't get anything else, and, final cut does not show at the top of my computer. I have the 27 inch iMac with the intel processor, any help will be appreciated. Larry
Sounds like you may have deleted more than just the movie file. It the FCP application in the Applications folder? if so, try launching from there. If not, you'll neeed to uninstall the app completely using this: http://www.digitalrebellion.com/fcsremover/ then reinstall from the original install discs.
You may want to first try trashing FCP's preferences.
-DH
Maybe you are looking for
-
How to trigger a pop-up on click of dial button on IC web UI - CRM 7.0
I want to enahcne the standard button 'Dial' that is displayed on Interaction center web UI. I am trying to show a custom popup with list of phone numbers of the BP for the sales agent to select from. I created the custom component to display the dat
-
Error while rman recovery of database
We are using rman recovery for database clone. I am getting the following error, restoring datafile 00442 to /d05/u10/oracle/ndevdata/applsysd06.dbf channel dup1: reading from backup piece /db05/PROD_BACKUPS/inc0_dPROD_u1bku1pnr_t702605051_s15403_p1
-
Embedding Fonts in Adobe Acrobat Distiller 6.0
I am generating PDF's on a file server using Adobe Distiller 6.0 I need to display some text using the barcode39 font. However, when i view the completed pdf, the only place i can see the actual barcode image is on the server or a computer that has t
-
Report to write about Java Security
Hello I'm doing a project for my studies; I'm investigating some points of java security (class loader, bytecoder verifier, security manager and applets). In the second part of my report, I would like to do some tests to show these functionalities in
-
Show PDF File in ALBPM Presentation
Hi, Can I show a pdf file stored in a BPM Object (binary attribute) with a Presentation? I have tried with iframe but this option needs a path or url (String) and I only have the binary file (I can't save it in a folder) Thanks!