Final Cut Pro jumpy image

Hello Community,
I imported some footage with the Panasonic AGAF 101 (PH 1080/50i)
The image looks great in the camera but when I import the material the image doesn't flow (almost jerky and jumpy image).
Is there a configartion that migh be set wrongly in FCS?
Many Thanks

Usually erratic playback is caused by editing with a non-native codec or, if you are using a native codec, not having drives fast enough to push the data stream or there is a mismatch between your sequence settings and your material codec.
If you used Log & Transfer, to what format (codec) did FCP convert the material?
Look in the Browser window, the codec should be listed in the COMPRSSOR column.
Or you can get the same information by right clicking on a clip in the timeline and select "Item properties>format" (or Command + 9 from the keyboard).
What kind of computer are you using?
Where is the media stored? (system drive or second drive?)
Is the scratch drive set to a non-system drive?
How much free space on each drive?
Good luck,
x

Similar Messages

Final Cut Pro X Image Sequence Export missing frames per second option?

I am using the trial version of Final Cut Pro X. I can export an image sequence but it will only allow me to do so at 30 frames per second -every single frame!
So a 10 min movie takes half an hour to export 20,000+ frames that no one on earth has time to look thru.
In my old Final Cut Express I was able to choose 1 or 2 frames per second, which was just right.
What am I missing?
Do I need to buy Quicktime Pro or Compressor to allow me to export image sequences without exporting every frame?
Why would Apple even have an image sequence export if it only allows you to export every frame, or it that only in the trial version?
Thank you

I found a free option for you, if you don't already have Compressor 4.
In FCPX create your movie. Then SHARE as a Master File.
Get MPEG Streamclip, which is a free app available here.
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
Drag your Master File into MPEG Streamclip.
In MPEG Streamclip, select FILE/EXPORT TO OTHER FORMATS.
In FORMAT: choose IMAGE SEQUENCE
In OPTIONS, choose your frame rate.

Final Cut Pro wont start

Hi,
Since I took my Imac into be repaired Final Cut has ceased to work. Everytime I try to start it up I just get the message: "The Application Final Cut Pro quit unexpectedly".
The error message in report says this:
Dyld Error Message:
Symbol not found: kPrivateTundraFileWritingOptionsKeyDontValidateTimeCodeWhenWriting
Referenced from: /Applications/Final Cut Pro.app/Contents/MacOS/../Frameworks/
Anybody have any ideas?

I've just reinstalled everything ...
it just won't start up ...
HELP !!!?
Process: Final Cut Pro [127]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: ??? (???)
Build Info: FCPApp-705022005~2
Code Type: X86 (Native)
Parent Process: launchd [88]
Date/Time: 2008-11-27 00:58:45.171 +0100
OS Version: Mac OS X 10.5.5 (9F33)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
Referenced from: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Reason: image not found

My final cut pro will not launch, I keep getting Final Cut Pro quit unexpectedly

I've done everything to deleting preferences and plug ins to re installing it, someone please help me with this problem

No luck at all, ive done everything thinkable and this is what i get in my report
Process:         Final Cut Pro [284]
Path:            /Users/ConGar/Desktop/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier:      com.apple.FinalCutPro
Version:         ??? (???)
Build Info:      FCPApp-906181654~22
Code Type:       X86 (Native)
Parent Process: launchd [78]
Interval Since Last Report:          53967 sec
Crashes Since Last Report:           20
Per-App Interval Since Last Report: 0 sec
Per-App Crashes Since Last Report:   20
Date/Time:       2011-06-22 12:40:21.298 -0400
OS Version:      Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: FB70EBC0-C946-4694-AE72-9D861D7E5486
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Application Support/ProApps/SharedA/Frameworks/ProFX.framework/Versions/A/ProFX
Referenced from: /Users/ConGar/Desktop/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Reason: image not found

Final Cut Pro 5.1.4 with leopard Urgent help!

a few days ago i installed OS X 10.5 (Leopard) on my 1.25GHz PowerPC G4 (2 GB RAM) using the "Erase and Install" option and today i copied the Final Cut Pro 5.1.4 application onto my desktop from a backup i had. Now as soon as is try to open the application it immediately quit!
Here is the log:
Process: Final Cut Pro [120]
Path: /Users/Robs/Desktop/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: ??? (???)
Build Info: FCPApp-702211411~2
Code Type: PPC (Native)
Parent Process: launchd [64]
Date/Time: 2008-01-02 14:41:03.119 +0200
OS Version: Mac OS X 10.5 (9A581)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x000000008fe0105c
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/ProFX.framework/Versions/A/ProFX
Referenced from: /Users/Robs/Desktop/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Reason: image not found

They only added Leopard support to the latest version (6.0.2) I'm afraid.
Per the following KB article, FCP 5.1.4 and above are supported on Leopard: Final Cut Pro 4.5: Not supported on Mac OS X 10.5 Leopard
To the OP: you did the correct thing by doing a clean install of Leopard, but you must also reinstall Final Cut Studio from the install discs in order to have a properly functioning copy.

Final Cut Pro Crashing on Launch

Hi all,
For some time now my FCP 7.0.3 has been crashing on start-up. I'm not sure when it first started, or what I may have done around that time that may have caused it.Can anyone suggest any fixes or solutions to this?
here is crash report............
Process:         Final Cut Pro [1439]
Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier:      com.apple.FinalCutPro
Version:         ???
Build Info:      FCPApp-1008261348~8
Code Type:       X86 (Native)
Parent Process: launchd [540]
Responsible:     Final Cut Pro [1439]
User ID:         501
Date/Time:       2014-05-27 12:18:59.448 +0530
OS Version:      Mac OS X 10.9.3 (13D65)
Report Version: 11
Anonymous UUID: F29C8A1E-C86A-2891-0E61-049A0EACC62A
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Application Support/ProApps/SharedA/Frameworks/ProFX.framework/Versions/A/ProFX
Referenced from: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Reason: image not found
Binary Images:
0x8fe54000 - 0x8fe86417 dyld (239.4) <FF5ED937-CC28-3FEF-BCAF-750B1CDBAE36> /usr/lib/dyld
0x9023c000 - 0x902b3ffb com.apple.framework.IOKit (2.0.1 - 907.100.13) <D1308EE0-96AA-3442-A27B-264F58AE12B4> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x902b4000 - 0x904b6fff com.apple.CoreFoundation (6.9 - 855.16) <6283B27F-3C46-365F-932C-1A7102D8A3CF> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x90ac3000 - 0x90b18ff7 com.apple.audio.CoreAudio (4.2.0 - 4.2.0) <0F1C111F-1E64-33BB-A69F-14643B3037D5> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x90d62000 - 0x90db3ff1 libstdc++.6.dylib (60) <354F284B-2343-3810-9CA2-E28038824F6E> /usr/lib/libstdc++.6.dylib
0x91a29000 - 0x91bd5fff com.apple.QuartzCore (1.8 - 332.3) <DA347693-5E26-3E47-A2B3-3824C52EB08B> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x91bd6000 - 0x91c3ffff com.apple.SystemConfiguration (1.13.1 - 1.13.1) <3AD9C90B-40A9-312B-B479-3AB178A96EA1> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x94621000 - 0x94621fff com.apple.Accelerate (1.9 - Accelerate 1.9) <C85070A7-D942-3CFA-981F-5864480788C8> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x94b90000 - 0x94dffff6 com.apple.security (7.0 - 55471.14.4) <4C9E60A9-6861-3AFF-BEB8-637771FEC78B> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x94e17000 - 0x94e17ffd com.apple.audio.units.AudioUnit (1.10 - 1.10) <9515158F-3A33-39CF-AD5A-201C2B121F33> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x952ac000 - 0x952adfff libSystem.B.dylib (1197.1.1) <789CF4BE-5A0B-310E-9515-E515EA033D03> /usr/lib/libSystem.B.dylib
0x9577a000 - 0x9577afff com.apple.quartzframework (1.5 - 1.5) <5BB3FDD4-4727-3D1B-9582-C96F36DA1542> /System/Library/Frameworks/Quartz.framework/Versions/A/Quartz
0x96936000 - 0x9693dffe com.apple.agl (3.2.3 - AGL-3.2.3) <808BEF15-F413-34AD-8932-E0655519E2E0> /System/Library/Frameworks/AGL.framework/Versions/A/AGL
0x974fa000 - 0x97776fe7 com.apple.QuickTime (7.7.3 - 2826.19) <AEF12245-C9D5-3B50-8AB6-45DC794E693E> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x97818000 - 0x97818fff com.apple.Cocoa (6.8 - 20) <407DC9E6-BBCE-3D34-9BBB-00C90584FFDF> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x97a71000 - 0x97c194af libobjc.A.dylib (551.1) <31CBE178-E972-30D1-ADC6-4B8345CAE326> /usr/lib/libobjc.A.dylib
0x98291000 - 0x98291fff com.apple.Carbon (154 - 157) <6C29C608-97B4-306E-AEC5-6F48EDF7EFB5> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x991da000 - 0x991e8ff3 com.apple.opengl (9.6.1 - 9.6.1) <B8205F16-6435-3062-89C9-2D8FF1799B3C> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.4f1 13674, 3 services, 23 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 320.07 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub
USB Device: IR Receiver
USB Device: Built-in iSight
USB Device: Hub
USB Device: DataTraveler G3
USB Device: Internal Memory Card Reader
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus:

Some general FCP trouble-shooting suggestions.
Use this free app to trash the preferences. This should be the first thing you try when any problems occur.
http://www.digitalrebellion.com/prefman/
2. Open Disk Utility and Repair Permissions.
3. Trash FCP using this free app and reinstall it.
http://www.digitalrebellion.com/fcsremover/
4. If these 3 measures don't work, create a new User Account (Admin) in System Preferences and try running FCP from that as it sometimes works miracles.

I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

As your rotate the image, you will begin to see black edges. So, as Tom implies, the image must be scaled up to hide those voids. If you shot 4k ad are editing in a HD timeline, no problem, lots of room to spare. If you shot 1080 and are editing in a 1080 timeline, you will run into issues at a certain point. However, if your 1080 project is going to be transcoded to 720 or ye olde DVD you won't notice any deterioration at all.

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

How to show each color channel image of a video on Final Cut Pro X

Hi, Sir,
How to show each color channel (R or G or B) image of a video on Final Cut Pro X? I found this feature is useful for the image quality editing, such as the noise reduction.

Do you mean this?

Using Photoshop images in Final Cut Pro 6

when using photoshop images (drawn images not photos) in Final Cut Pro, why do they blur when rendered?? What settings should I use when creating the images in Photoshop CS2 to be compatible with FCP 6?

You're in the wrong forum.
For FCP 1 to 7 you need the Final Cut Studio forum.

HT5148 i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear. how do i get my video to play clear.

i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear again. how do i get my video to play clear and not fuzzy?

Same reply.

Quicktime 7.1.5/Final Cut Pro 4.5 Image quality problems

Hi.
A lot of the time when I export .dv video into a lower quality video (.mov, .mp4) there are weird lines that appear in the motion. It's hard to explain, so I will post an image of it.
http://img.photobucket.com/albums/1003/KhyronJinn/Screens%20with%20a%20purpose/Q uickTimePlayerScreenSnapz001.jpg
*Just tried again*
This happens with ANY export to any settings, even at the highest quality and almost identical hard drive space. I've also observed this problem when using still frames in Final Cut Pro, these lines of motion (I guess you could call them?) from one frame to another when extracted from a still. I'm at a complete loss here.

Use the De-interlace filter in FCP...If your using Compressor, best bet is to de-interlace in Compressor.

Final Cut Pro X (10.1.1) can't be opened because "the image is not recognized".

I have tried to download the trail version of Final Cut Pro X (10.1.1) twice but every time it has been downloaded my computer tells me it can't be opened because "the image is not recognized".
Do any of you have a similar problem or know a solution?

Also having this issue, Im on OSX Yosimite 10.10.1 trying to download the 30 day trial version of Final Cut Pro 10.1.4
MacBook Pro (13-inch, Early 2011)
Processor: 2.3 GHz Intel Core i5
Mem: 8 GB 1600 MHz DDR3
I have downloaded the 30 day trial of Final Cut Pro from https://www.apple.com/ie/final-cut-pro/trial/
The file which gets downloaded is "FinalCutProTrial10.1.4.dmg"
The size of this file is 2,147,487,419 bytes (as viewed in the inspector)
I would be interested to hear from anyone who installed this successfully whether the DMG file was the exact same size (although I have a feeling I wont hear anything as most people would delete the DMG file after installing).

How to send images to final cut pro X from Lightroom 3 ?

How do I pick up sorted images from Lightroom 3 in Final Cut Pro X?

Final Cut keeps saying that the TIF or Jpeg or apple is not a useable file extension. And QuickTime video will not work.

Animation. How do I import still images in final cut pro x (from dragon frame) duration 3 frames pr. image?

Animation. How do I import still images in final cut pro x (from dragon frame) duration 3 frames pr. image? We have allready tried to set stillimages duration in preferences to 0,08 sek, but it does not have any effect!

You can drag your images to the timeline, select all, ctrl-d and set the duration to 3 frames by typing 3 and enter.
Or you can use Quicktime 7 to "open image sequence", select the desired duration, export your animation to quicktime and import that into FCP X for further editing.

Final Cut Pro jumpy image

Similar Messages

Maybe you are looking for