Final Cut Pro Kernel Panic on all Playouts

This is one of the logs generated. Have done re-install on second drive to no avail. Any ideas would be appreciated.
Mon Dec 19 16:31:15 2005
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000001A95F428 PC=0x00000000000950F0
Latest crash info for cpu 0:
Exception state (sv=0x308E6C80)
PC=0x000950F0; MSR=0x00001030; DAR=0x1A95F428; DSISR=0x0A000000; LR=0x00087ACC; R1=0x187BB900; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000878E8 0x0021B560 0x000BCFDC 0x000BA864 0x000B9AE4 0x001DDECC 0x000CEC1C 0x0022337C
0x00223218 0x00246D84 0x000941C0 0x00740045
Proceeding back via exception chain:
Exception state (sv=0x308E6C80)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x38E66A00)
PC=0x9002AB6C; MSR=0x0200F030; DAR=0x09F03000; DSISR=0x42000000; LR=0x902D15C0; R1=0xBFFFBDE0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
panic(cpu 0): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00083498 0x0008397C 0x0001EDA4 0x00090C38 0x0009402C
Proceeding back via exception chain:
Exception state (sv=0x308E6C80)
PC=0x000950F0; MSR=0x00001030; DAR=0x1A95F428; DSISR=0x0A000000; LR=0x00087ACC; R1=0x187BB900; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000878E8 0x0021B560 0x000BCFDC 0x000BA864 0x000B9AE4 0x001DDECC 0x000CEC1C 0x0022337C
0x00223218 0x00246D84 0x000941C0 0x00740045
Exception state (sv=0x38E66A00)
PC=0x9002AB6C; MSR=0x0200F030; DAR=0x09F03000; DSISR=0x42000000; LR=0x902D15C0; R1=0xBFFFBDE0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC

I discovered the processor upgrade had not been downclocked as promised before delivery. Once I did it, all my problems went away.

Similar Messages

  • Final Cut Express Kernel Panic-Causes, Fixes?

    Problem: A project file I've been working with for some time which had been operating normally, now creates a *kernel panic* on loading. It will not open.
    *Work Around:* I opened an earlier version of this file from the Auto Save vault and it opened without any problem. Also, other FCE files open fine.
    *Possible Related Considerations:* Sequences - The file had a large number of sequences open all at once on the timeline - approximately 75 sequences. _New Software_ - Just prior to this problem occurring, I installed Peak Pro 6.1.1. Could a large number of open sequences or a newly installed audio software cause this problem?
    Any suggestions on what might cause a kernel panic with FCE and how to avoid/fix this problem?
    Thanks!

    Kernel panics are almost always hardware problems. Most likely a RAM issue. Very probably caused by the timeline with a lot of open sequences. 75 is a lot. I've never heard of anyone having that many open sequences. You've probably jammed up the RAM, especially if there's a defect. Especially if the sequences have a lot of large still images. You might want to take the computer to an Apple store or an Apple service technician.

  • Upgraded final cut pro 10.1.4 all my projects disappeared

    I can't get any of my projects to appear in final cut - extremely frustrating. I can't get any of the files to open. Where is everything?

    I upgraded from an early version of Final Cut 10 - from 2 years ago. I just had to rebuild my computer due to a drive that went down. When I downloaded the software, it asked about updating files. I said yes but I didn't have all the drives online so it couldn't do it for all the files and I had to say that I would do manually later. So when final cut opened, none of my projects were there. When I go to file/open/library/other, there are no files with that purple library icon. I can see the folders with the events and projects but it can't open anything.

  • My effects in final cut pro x apply to all clips beneath them.  How do I get that to stop?

    I want to put a fade in on the clips in my video, but I do not want that to apply to the background I have placed in the layer below.  Yet when I put the fade on, the effect applies to the selected clip and every layer below it.  How do I turn off this feature?

    By fade in I assume you mean a basic Cross Dissolve transition.  The best way to ensure transparency fades it to use the Opacity controls in the Video Animation editor. Select the clip you need to apply the fades to and type Control-V. The animation editor will pop up from the clip and the Opacity controls will by on the bottom of the list. Click on the little black disclosure icon on the right side which will extend the area even more. When you mouse over the left edge near the top of the area, a circle will appear. Clicking and dragging on that circle to the right will create a "ramp in" opacity. The same for the right edge to be used as a fade out.

  • Artifacts in Final Cut Pro

    Let me first start off by saying that I am new to the Shake realm but have been a long time editor with Final Cut Pro. With that said, I am running Final Cut 5.1.1 and I sent a clip from my timeline to Shake to use the smoothcam node. After I tweaked the clip in shake I rendered the file out node but when I view the clip in Final Cut Pro there are artifacts all over the screen. It almost looks like the video is interlaced. I put the de-interlace filter on both the original and the shake composite but it didnt do much. Any ideas?

    Well, to me that after picture looks like feeding interlaced material to smoothcam without telling it. It's analysing the frame like it's progressive material as opposed to dealing with each field as a frame. At least to me, that's what it looks like.
    As to the difference between SmoothCam and Stabilize, SmoothCam does an optical flow analysis of the material, then calculates movement and counters it to the degree specified. With Stabilize, you pick up to 4 tracking points, then track them, then use that to lock down the shot. If you still want movement, but want to remove jumpiness, you have to process the tracking curves to allow movement, but remove glitchiness.
    Patrick

  • Final Cut Pro 10.1.3 - Choose another SAN location

    I have just upgraded to 10.1.3 and Final Cut Pro still cannot update ALL my projects and events that are in the Old Final Cut Projects and Events on my 2T My Passport external HD.
    I get a message that this location - My Passport - is not a valid and that I should choose another SAN location or folder.
    I'm at a loss here. I have always been able to use the external HD when using Final Cut Pro.
    I have watched Final Cut Pro how-to-update videos, have searched these discussions but to no avail.
    Any help most welcome!

    I moved the Final Cut Events and Final Cut Projects out of the My Passport Old Final Cut Projects and Events. Now I don't get the message saying it is not a valid SAN, but when I try to update the Projects and Events I get a message that there was an error when updating and another My Passport Old Final Cut Projects and Events is created.
    This looks like Catch 22!
    Is it possible to downgrade to Final Cut 10.0.9?

  • Remove plugins Final Cut Pro X

    I've installed several trial plugins for Final Cut Pro X that I'd like to remove now.  These include trial Effect/Transition plugins from companies such as Shefield Softworks, Nattress, SugarFx, PHYX, FxFactory Pro, etc.   I moved the plugins from the Movies/Motion Templates/Effects (Transitions) folder to my Trash, emptied the Trash then rebooted by MacBook Pro.  The plugins are gone when I check with Finder after restarting the computer.  However, after I start Final Cut Pro X, the plugins all reappear in both FCP as well as in Finder.  How do I remove these?
    Thanks

    wmskaggs wrote:
    I've installed several trial plugins … after I start Final Cut Pro X, the plugins all reappear in both FCP as well as in Finder.  How do I remove these?
    you're probably using FxFactory
    from noiseindustry
    in your Apps-Folder, launch the app …
    you're now entitled to switch-off and -on individual plug-ins.
    (there are some free ones avail, as 'Pan and Zoom', a very handy Ken-Burns-like effect)
    under 'Actions' you'll find the deinstaller
    I may profit from this link

  • I need to record two camera interview shoots and turn the video around quickly. What is the best solution using a MacBook Pro and final cut pro?

    I need to record two camera interview shoots and turn the video around quickly. What is the best solution using a MacBook Pro and final cut pro?

    Try reimporting all your media: file>>import>>reimport>>continue

  • Selling my final cut pro studio

    I have a question,,,,I registered my final cut pro studio on my g5 i bought 5 years ago...I wiped my hard drive clean and sold the computer....that was the only computer i registered final cut pro studio with..I am not thinking about selling my final cut pro studio i have all the original discs, manuals and serial numbers....my question is,,,,is this sellable? how many computers can you register final cut pro studio on? and will my buyer be able to upgrade? and how much is that upgrade? thanks in advance for any and all answers

    is there anything you have to do to transfer the license?
    Did you even read the license agreement that was so conveniently linked by Nick Holmes?
    3. Transfer. You may not rent, lease, lend or sublicense the Apple Software. You may, however, make a one-time permanent transfer of all of your license rights to the Apple Software to another party, provided that: (a) the transfer must include all of the Apple Software, including all its component parts, original media, printed materials and this License; (b) you do not retain any copies of the Apple Software, full or partial, including copies stored on a computer or other storage device; and (c) the party receiving the Apple Software reads and agrees to accept the terms and conditions of this License.
    All components of the Apple Software are provided as part of a bundle and may not be separated from the bundle and distributed as standalone applications.
    Updates: If an Apple Software update completely replaces (full install) a previously licensed version of the Apple Software, you may not use both versions of the Apple Software at the same time nor may you transfer them separately.
    -DH

  • "Tempaltes" in Final Cut Pro

    Hi,
    For the month of July, I will be editing quite a few Final Cut Pro video projects - with all the same music, cuts, transitions, and effects. The only difference between the projects is the actual video and some titles. Is there a way to set up a "template" so that the structure of the project stays the same and just change the video every iteration? This would be a big deal for me because there must be over 200 cuts in an 8 minute video (the individual clips are very short) and having this "structure" would be a huge time saver.
    Many thanks!
    -Max

    Once you have created your first sequence, you can use it as the template. Create a new project and drag the original sequence into the new project. Import or digitize the media for the new project. To replace clip one of the original sequence with the "new" clip, right mouse click or control click the media from you browser and click copy. In your sequence, right mouse click or control click the clip to be replaced and clip paste attributes. The window that appears will have the option Content under Video Attributes. By clicking Content you will replace the clip in the sequence with the clip from your browser. Continue down your timeline copy and pasting attributes until the sequence is complete. You may need to set in points for the new media, but otherwise you copy and paste attributes. This is the easiest way to use an existing sequence as a template.
    I hope that helps.

  • Make Multiclip Sequence glitch in final cut pro 7?

    Hi, I'm trying to sync two cameras and audio, all with the appropriate timecodes.
    Within final cut pro 7, i select all of my video clips and audio I want to sync, right-click and hit "make multiclip sequence," and the appropriate menu even pops up with the matched up files by their respective timecodes, but often when i create the sequence it will be blank, or contain just random clips of audio towards the end. does anyone know why this happens? very frustrating because it works great sometimes, but frequently i get a blank sequence and end up using plural eyes.
    xdcam footage
    compressor is xdcam ex 1080p24, files are from an f3 camera that i rewrapped in xdcam transfer before bringing into fcp 7.

    Thanks Michael, the problem is definitely the audio (syncing the two video clips by themselves works, it creates a new synced sequence), but I edited the audio in a new sequence and exported it, and when i tried to sync it it didn't work.
    the frustrating part is that when i select just the audio and the two video clips (that have audio), the multiclip menu pops up syncing them (so close!) , but when i create a new sequence it's blank! even more frustrating is that this process used to work and no longer does.

  • Importing final cut pro 7 to final cut X using XML

    OK so I just read Apple's new FAQ and it says support for XML is forthcoming. Couldn't someone enterprising individual   just write an app which transforms FCXML from FCP 7 to FCP X XML. There could be some data loss, but better than nothing..

    the black sun wrote:
    But they have said they will not be supporting import of FCP 7 projects. Sad but true.
    Factually incorrect. Sad but true.
    Tell me what is factually incorrect? There is absolutely no mention or commitment to providing any sort of tool to bring in final cut pro 7 projects in any shape or form. They could have said "a limited import tool is being worked on, but will only support a limited feature set, and data loss/changes to your project may occur." But they didn't. Here's the exact quote from Apple's FAQ (emphasis added):
    Can I import projects from Final Cut Pro 7 into Final Cut Pro X?
    Final Cut Pro X includes an all-new project architecture structured around a trackless timeline and connected clips. In addition, Final Cut Pro X features new and redesigned audio effects, video effects, and color grading tools. Because of these changes, there is no way to “translate” or bring in old projects without changing or losing data. But if you’re already working with Final Cut Pro 7, you can continue to do so after installing Final Cut Pro X, and Final Cut Pro 7 will work with Mac OS X Lion. You can also import your media files from previous versions into Final Cut Pro X.

  • Final cut pro 7 viewer video running slow (Strobing)

    Hey,
    Im having a problem with my Final cut Pro 7. Just all of a sudden my video viewer footage when I play it back has been strobing.
    Help please?

    Does this happen with all the clips you load to the viewer or just some?
    Click on a clip (that is strobing)  in the FCP browser to select it, and once selected, type Command + 9 to see the item properties for that clip.
    Either report those properties here or take a screen shot of the item properties for the clip and post that here.
    MtD

  • Video converter, final cut pro supports?

    I understand thet final cut pro does not accept all video formats and before purchasing any video converter, I need to know which one is compatible with the said program. I seen some article that the ANY VIDEO CONVERTER is not that good. Feedback please.. Thanks!

    If you don't get an answer here, you may want to post in the Final Cut Pro X discussion here.

  • HT5148 Final Cut Pro X compatible?

    Final Cut Pro X compatible? All that my "About This Mac" gfx info tells me is this: Intel HD Graphics 4000 512 MB
    Will that work?

    Thanks, Tom. Appreciate that clue, but I don't want to spend $300 on a program that won't run. I have a 2012 MacBook Pro - pretty new. All the other parameters needed for Final Cut seem to be on board, so I guess I'm okay. But I'm not risking the money. I suppose I'll have to run the free trial version to know for sure. Was hoping to take advantage of potential Cyber Monday deals. Guess not.

Maybe you are looking for