Final Cut Pro laggs my mac pro???

Hey guys wats up...Well im new to Mac/Video I have a Mac Pro and using a Canon XH-G1 and I just got final cut studio 2 last week just getting use to it... Im an absolute newb to all of this. Im just wondering, when i shot my HD footage and was editing i noticed a little lag and got the "lost frames" message every 5sec of video when i would try to play it back? Now it bothered my but I moved on...but now..I sent my project over to color...Fixed it how i wanted it/ rendered/ and sent it back to final cut studio and when I play it...It'll play about 2 to 3 seconds of video then it lags and all i can hear is sound and see the spinning beach ball of death...
I never thought i would see it with my Mac pro? Please help....

OffRoadMacPro wrote:
Cool Thanks...how about that IDK what its called but whatever I need to transfer it to the computer without being compressed with fire wire...u know for the HD/SD SDI out thing....That would also help out alot right?
1. Firewire doesn't compress anything. It is a simple data transfer. The only way that you could get your HDV footage out of your camera without it being compressed is to capture it live out of the HD-SDI port using a Kona or Blackmagic card. Once your footage goes to tape it is compressed, firewire does not increase or decrease that compression.
2. Welcome to the forums. Hang around, learn a lot and contribute. However, lose the "text message" (IDK) language. Folks here shouldn't ahve to go to wikipedia to figure out what you are saying.
K

Similar Messages

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds.

Final Cut Pro 6 on Mac OS Snow Leopard installation problem HELP!!!

After 2 - 3 hours of installing all 10 FCS 2.0 discs and Software Updates, I can't seem to launch Final Cut Pro 6.0.6. I get *"...software maybe damaged or not installed.."* So I removed all of them and only custom-installed Final Cut Pro 6.0.6. It works with no problem!!! Then I custom-installed Soundtrack, Motion, DVD Studio Pro etc..., I can't launch Final Cut Pro 6.0.6. again! What the **** is going on? I get that "damaged" warning and Final Cut Pro icon is replaced by missing application icon.
My Mac Pro also has _Pro Tools 8 LE_ with _003 Mixer Rack connect to USB_. That's it. No other application. You think this is maybe causing the problem?
Anyone having similar problem?

https://discussions.apple.com/docs/DOC-2494
Carbon Copy Cloner is pretty simple to use. If you have any questions, post back or read the documentation. As I said in the user tip, test your clone after you make it to be sure it is bootable and your apps work.

MPEG2 codec not working in Final Cut Pro on Mac OSX Tiger

We have been using the File-export-Quicktime Conversion-MPEG2 codec for exporting of files from Final Cut Pro to DVD Studio Pro. On the new mac system that was just bought, the option does not show up.
Currently the system is running Quicktime Pro 7.1.2/ FCP 5 and DVD Studio Pro 4 and it is a new mac system running Mac OSX Tiger.
This problem has happened before on a mac running on an older system, but that was solved by reinstalling FCP and then DVD Studio pro and making sure that the QT Pro was of the latest version.
Right now, we have reinstalled everything the same way, tried installing DVD Studio Pro after, we have also done a full software update of the software over the net.
The codec is still not working, all the macs in the office are supposed to be upgraded to Mac osx tiger, but right now we can't do so, cos then we wouldn't be able to burn any DVDs.
Please help, thanks.

The installation of QT 7 is the culprit behind the missing MPEG-2 Export Component. But during upgrades, it doesn't always get rid of the file ... probably what happened on your older system when you upgraded to QT 7 or Tiger. Either the new system came with QT 7 preinstalled, therefore not including the Export Component, or if it was upgraded, the upgrade missed it.
-DH

How can I use Final Cut Express in a Mac Pro

I want to know how could I use my Final Cut Express HD programm (Version 3) in my new Mac Pro.

FCE 3.0 was not designed to work with Intel based Macs when they were introduced years ago so you have no chance with a modern Mac.
You must upgrade to FCE 4 unless you want to move onto Final Cut Pro X which is designed to be used with the latest technology.
Final Cut Studio 3 will also work OK.

The best Mac laptop to use Final Cut Pro 4???

I don't know much about Macs and I know even less about Mac laptops! Someone told me that the macbook (Intel based??) would be the best mac laptop to use with Final Cut Pro 4. Could someone tell me if this IS my best option or if I should be looking for a powerbook? What specs do I need to be looking for? I know that I need a G4 or higher, but the memory, speed, etc... I'm clueless about...

Get a MacBookPro 17" and upgrade to FCP5.1
You need the 17" to get the firewire 800 port - necessary if you want to edit anything more than DV or HDV.
The upgrade from FCP4 to FCP5.1 is very inexpensive now (offer expires in mid December) and you would be very foolish to not do it.
good luck.
x
yes, this should have been posted in the FCP forum, but why clutter up two forums ...

How can Install Final Cut Studio in my Mac Pro Early 2009 ??

I have Final Cut Studio 7 NOT installed yet and Mac Pro Early 2009 with OSX 10.9.5. I have Final Cut Pro X Version 10.1.4 installed. Can I installed Final Cut Studio here together with FCPX ?? Maybe not. What is the best way to install FCP Studio??
Do I need to make a partition? How? If so, what is the best OSX Version for FCP Studio ?? 10.6, 10.7, 10.8, 10.9 ??
Thanks for any help I can get
Alberto Marban

Here is the Best Practice Guidelines from Apple:
Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
MtD

Final cut pro make Mac pro kernel panic with RAM from other manufacturers

hi all
if i installed RAM For mac Pro from 667MHz DDR2 fully buffered ECC RAM from other manufacturers
final cut pro (just final cut)
make the machine kernel panic messege
all programs working good (like adobe and other compositing program) but final cut freez the machine and kernel panic
the standard RAMs good

Ahmed:
You can try visiting/searching the Expanding your Power Mac G5 forum. You'll find A LOT of help about RAM issues.
Any RAM brand must work but you maust be sure it follows the MAc specs. Some brand sites have good product locator by computer manufacturer/model (i.e. Kingston and Crucial). In fact there is no Apple branded RAM, they use a lot of different ones.
Inside FCP settings you'll find how to manage the memory that the program use, but that settings depends on the total quantity of memory you have installed, and you didn't post that information.
Alberto

Unable to install final cut pro on mac pro computer

Hello,
I started to use my new MacPro (Please see specs. at bottom of Page) and tried to install Final Cut Studio but never succeeded. I never can go beyond disk “apple loops for soundtrack pro.” the application “installer” quits unexpectedly each time. Does anyone has had the same problem? I would truly appreciate any help on this matter.
Thank you,
sandrine
SPECS:
Mac Pro - OS10.4.8
Machine Model: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 1.33 GHz
MAC PRO Mac OS X (10.4.8)

You'll be needing the univeral version of FCP (FCP
5.1) to install it for starters.
Might clean the disks... if that fails and you do
have the Unversal version, Call Apple. Could have a
bad disk, and new install issues over the phone
support are free. 1-800-myapple.
Jerry
Jerry,
I thank you very much for your help. i will follow your advice and get the 5.1 universal version. do you know if i need to uninstall the version (final cut pro 5) that is on my computer.
agaim, thank you
sandrine
MAC PRO Mac OS X (10.4.8)
MAC PRO Mac OS X (10.4.8)

Is Final Cut Pro the only software that can open video .MXF files for Macs?

Hello,
Many thanks in advance for your attention.
Trying to find software that will edit .MXF Video Files to work with Mac.
As the edit is simple, prefer iMovie, but happy if the Conversion software only works with FCExpress (or even FCPro if that is the only alternative).
1. If it matters, .MXF (Material Exchange Format) Video files came from shooting on a Panasonic 500 P2. Originally downloaded onto a Windows system, using Adobe Premiere.
2. I just want to see and convert some of the shots I did for my Reel, etc., but I have a Mac.
3. I have iMovie HD, iMovie 09, and FCExpress (which I don't know how to use that well).
4. When I attach an External HD with backup files of all the footage shot, they show up named as .MXF files. They appear as VLC files (VLC icon), but the suffix is .MXF.
5. When I try to play them as VLC files, they won't play. It seems they start to play, but then the VLC software quits.
6. So I have tried downloading some software on the Internet that Google says converts .MXF files.
I tried: iSkysoft Video Converter, AVCWare Mac Video Converter, MPEG Streamclip, and a couple others. They all seem to have basically the same conversion setups, but when I click to pick one .MXF file, none of them recognize it. (The file in my Browse window is greyed out).
7. MoyaVideo Converter for Mac recognizes the .MXF file, but when I hit the "conversion" button - I tried a couple different settings, all it seems to convert is the first frame. Even if the .MXF file says a clip is 123MB or 43 seconds long, etc.
8. I can't even watch the clip in Preview. Press Play and it is just the first frame.
9. I have read elsewhere in these forums, some people touting conversion software from a company in Germany - mfxformac. I am fine with paying for conversion software, but $500?
10. And I have read elsewhere that only Final Cut Pro has a codec that will open .MXF files. If this is so, why do the above companies claim to have software that opens .MXF files for Mac?
11. Isn't there a further problem if I can't even see the video using VLC? Or is that because I am using Mac and need FCPro with the right codec?
Anyone's help would be greatly appreciated.

MXF files from P2 can only be imported using FCP. iMovie can't, nor FCE...if you are talking about APPLE software. Avid deals with MXF files natively. But FCP will ONLY import them if the entire P2 card structure is intact. Please tell me that you have the entire P2 card backups. If not, then it won't work. If you do...then here is the process for importing into FCP:
P2 Workflow with FCP 6
3. I have iMovie HD, iMovie 09, and FCExpress (which I don't know how to use that well).
Then you need someone to provide you with QT files of this footage. None of them work with P2.
NONE of the converters you listed will work... Sorry.
9. I have read elsewhere in these forums, some people touting conversion software from a company in Germany - mfxformac. I am fine with paying for conversion software, but $500?
That software is to get it to work with Final CUt Pro natively. What it doesn't do is convert the footage to QTs. There is also Raylight and Calibrated...but again, they are for FCP.
P2 is a professional format, and to use it you need professional software. iMovie won't work...nor will FCE. If you need to work with it in those formats, you need to have someone import the files and convert them to AIC (Apple Intermediate Codec).
HD Log might work...but not sure what QT format it converts to. A demo is available.
http://www.imagineproducts.com/index.php?mainpage=product_info&cPath=1&productsid=4&zenid=b2buo1aguk3cplmg23jn05aai7
Shane

I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?

Hello everyone
I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. I've tried to repair it using DU, but it said I needed to backup all my data and reinstall the OS. How do I backup my data to an external drive?
And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?
Hope you guys can help me!

You need to back up 2 folders, Final Cut Events and Final Cut Projects which by default are located on your Movies Folder. You can always check by clicking on a clip inside Fianl Cut X and selecting Show in Finder in the contextual menu for the selected clip.

Is it possible to share documents from Final cut pro x on my other mac?

is it possible to share documents from Final cut pro x on my other mac?

Yes, use SugarSync, multiple users can open the file at the same time if required.

Suitable macs for final cut pro?

Hello everybody,
I decided to switch to a MAC, in order to learn Final Cut Pro, but I need a clarification.
I'm interested in an iMAC 21.5inch, base model, so with a graphic card "NVIDIA GeForce 9400M graphics processor with 256MB of DDR3 SDRAM shared with main memory" (taken from the site).
I'm afraid that final cut pro is not supporting such a system, can you please confirm (or not) my impression?
Thank you very much!

Final Cut Pro will work perfectly on the cheapest iMac.
The graphics card may impinge on the performance of Color (one of the apps included in Final Cut Studio) but if you are an amateur you are unlikely to be too bothered about that.

Mac pro and Final Cut pro

I am trying to install Final Cut Pro onto my new Mac Pro. I keep getting the message "Re: This software requires certain hardware or software which is missing. * Power Macintosh G4/350 megahertz (MHZ) or faster * AGP graphics car.
My system is a Mac Pro 3,1 Quad Core Intel Xeon 2.8GHz with a ATI Radeon HD 2600. Why am I having this problem?

If you have a previous version you can buy an upgrade. The upgrade only requires the original serial number. What version do you have? The upgrade isn't viable for all versions. I think only 4.5 on up. Contact Apple...
Shane

HT4664 Can I use final cut pro X on " Mac mini" ?

Can I use final cut pro X on " Mac mini" ?

depending on what model: for sure yes, it does!
I did use FCPX on an old MacMini, c2d, 2.26GHz with 8GB Ram (using proxies made editing easy).
My actual work-horse is a MacMini i5, late 2012, 16GB Ram, plus some ext. usb3 drives = perfect for my needs! (costs vs. power)
I'm using two cheap 2.5" Toshiba 1TB usb3-drives, combined with MacOS' built-in DiskUtility as a Raid0 = 150mbps for under 100€ ... not professional (=raid0 contains a small risk of data loss), but again: best €-vs.-HP ratio

Final Cut Pro X and Mac Caption Site Licenses

How much does it cost for a site license for Final Cut Pro X and Mac Caption? I need to have one computer going for production and one for training someone. Is there 501C-3 pricing available?

FCP X can be used on as many Macs as you own. Be sure each is logged in to your iTunes/App Store account. So for two Macs that you own, you can download to both, only pay for one.
There is a bulk license deal for it, but you'd need to be running 10+ Macs before you'd get any discount or anything.
Mac Caption is an issue you'll have to take up with them.

Final Cut Pro laggs my mac pro???

Similar Messages

Maybe you are looking for