Final cut pro not exporting to youtube?

Final cut pro isnt exporting to youtube? why is this and what can i do to fix it?
Also says keyword: too_long ?

Isn't exporting to YouTube? Why? Can't see your computer. What's happening on it?
Are the keywords in the export tags too long?

Similar Messages

Final Cut Pro X Exporting to Youtube with Canon 5D Mark ii

Hi,
I'm having problems exporting to Youtube with Final Cut Pro X. i convert the file and upload, but the audio is not syncing properly. The video is fine. Any tips on what to do? I'm using a Canon 5 D Mark ii. 24fps, 1080
Also does anyone know where the audio setting are on FCPX?
Thanks

Hi aussiearn
The process you suggested worked beautifully: images clear and true sound accurate.
I have over 100 30 to 60-minute videos to put on a client's YouTube channel. Using the YouTube settings in Compressor my first uploads colours were looking washed out, and the audio progressively slipped when played via the Safari browser. Your advice has fixed this issue, so thank you for taking the time to post.
To clarify what I understood your process to be for others who may wish to use it:
In FCPX choose 'Share' from the menu bar
Select 'Export Media'
In the options presented: 'Export' should be set to 'Video and Audio'; 'Video codec' as H.264; 'Audio file format' will be greyed out but show Quicktime Movie; 'Open with' will show 'QuickTime Player.app (default)'. Click 'Next'.
You'll be presented with 'Save As' options. Name the file and select where you want it to go on your drive(s), and click 'Save'.
Export will begin: my 6.84GB video, which was 45-minutes of 1920 x 1080 at 23.98fps, took about 35 minutes using a Macbook Pro 2.2 Ghz Intel Core i7 with 8 GB of RAM
When the export is complete the video should automatically open in QuickTime.
Within QuickTime go to 'File' on the menu bar and choose 'Export for Web', which is at the bottom of the drop-down menu
You'll be presented with a box that says 'Export versions of your movie optimized for web-delivery to iPhone and the desktop'. Pick what you want to name the file in the 'Export as' and then where you want it to go in 'Where' (obviously enough). You can save in three versions for different contexts, but I chose only to save as 'Broadband', with the best quality as YouTube will automatically create different versions later. Click 'Export'.
An 'Export Progress' box should appear. My file took around 45-minutes to process.
At the end of the process you will find a folder with your chosen name, rather than a file. Click on tha folder, then click on the 'Resources' Folder you will find in side. Amongst other files you'll find a .m4v file with 'broadband' at the end of the name. Rename the file and change the suffix '.m4v' to '.mp4' and upload to YouTube.
As you said this seems to save a lot of time compared to compressor (perhaps half the time?) The file that began the process at 6.84 GB ended as 1.16 GB, and looks and sounds great.
Thank you,
Nigel

Final Cut Pro X, Export to Youtube fail says, QuickTime Error: -50

Im having trouble with Final Cut Pro X every time I try to export my project to Youtube a quarter way through processing it stops and says QuickTime Error: -50 How do I fix this?

I'm going to guess that you have a problematic clip(s) that FCP isn't happy with. Is your project all from the same source (camera, download, rip, etc
Also, how long is your project? There was a recent post where I was convinced that he had a corrupted clip and it turned out simply that the file size was too big.
But your error code indicates clip trouble.
Russ

Final cut pro not exporting my movie

My movie that I worked hard for is not exporting when I click export movie or when I try to upload it to Youtube I get an error please help me

Are you using FCPX Version 10.1 ?
Try: File / Share / Master File…
Then upload that movie to YouTube.

How does final cut pro x export a file if it has not finished rendering?

How does final cut pro x export a file if it has not finished rendering?
So today I finished a project: Share >Export > as a pro res 422 and I'm now burning with iDVD as we speak. FCPX is still doing background rendering! I hope my DVD turns out ok....

You don't need to render before export.
Rendering is for playback.
If your project plays OK from the storyline, you can safely turn off rendering in preferences.
Andy

I use Final Cut Pro X to make YouTube videos. The sound is great when I watch the videos on certain computers, but muffled on others. How do I fix this?

I use Final Cut Pro X to make YouTube videos. The sound is great when I watch the videos on certain computers, but muffled on others. How do I fix this?

You don't. You can't control how other computers or browsers play back the footage. The best you can do is export a master file that plays great on your computer. What youTube does with it, or how other computers play it back is out of your hands.
Just like me with broadcast TV shows. I deliver the most pristine version I can to the network. But then they convert it to a digital file that they then beam out to cable and satellite providers, who then compress it again to play on their systems. And then it arrives at grandma's house and plays on her TV. I have no control how my grandma receives the signal, nor how her TV is set up. Unless I am nice and tweak things when I go visit. But I can't do this at every house that might want to watch my show.

Final Cut Pro X Export Speed Problems

I'm having problems getting any real processor speed out of my Final Cut Pro X exports. Whether I do a direct native Pro Res export straight from FCPX or send to compressor with the same settings, or even change them to H.264 or something else, i more often get processing that looks like the included picture, barely one processor being tapped. Sometimes ill get 50 percent which is probably all direct export is meant to use, seems like Qmaster distributed processing still doesn't work here. Once i get the file out and then bring that into Compressor 4 I get no issues, can get 50 percent with regular submit and full speed all cores running with Quickcluster submit. Any ideas why this is happening?
Just to be clear, these are native ProRes HQ clips, no effects, nothing, just selects I'm trying output, and since we can't do reference clips anymore, well....

TThe most common cause of this problem is that the media hasn't been imported properly and is still referencing a camera card or archive. If you press Cmd-E and no dialog appears, this can be one cause.
BTw, this is primarily a user to user forum, so no one here really cares if you go and use Premiere.

Final cut pro X export files bigger than originals

I got two WMV files, each file size about 500mbs, I converted them to mp4 using permute. Afther converting, each file size about 490mbs.
Then I open the mp4 files with final cut pro, I just want to mend the two clips together, it's that simple. I finish puting the clips adjacent to each other. Then hit export and chose encoding method .h264.
When final cut finished exporting, the movie is over 4GB in size.
Why is it so big ? the orginal files combined size is just about 1 GB.

File numer 1
format :H.264, 1,280 x 720 AAC, 48000 Hz, Stereo (L R)
FPS: 29.97
data size: 1.23 GB
data rate: 3.64 Mbit/s
current size: 1,280 × 720 pixels (Actual)
File number 2
format: H.264, 1,280 x 720 AAC, 48000 Hz, Stereo (L R)
FPS: 29.97
data size: 962.9 MB
data rate: 3.62 Mbit/s
current size: 1,280 × 720 pixels (Actual)
After putting two clips together in final cut pro and export with h.264 encoding
Format: H.264, 1,280 x 720 AAC, 48000 Hz, 5.1 (C L R Ls Rs LFE)
FPS: 29.97
data size: 4.3 GB
data rate: 7.10 Mbit/s
current size: 1,280 × 720 pixels (Actual)

Final Cut Pro X export troubles: exports video with only half the audio.

Ever since I updated Final Cut Pro X, I've been having problems exporting. I either get error messages or the audio doesn't fully export. When I tried exporting a master file to my desktop, I got a message saying “error occurred when creating frame” then lists the frame number. Someone suggested copying the project file and pasting it into a new project. I did that, and it exported without the error popping up; but halfway through the video, the audio disappears, and does so in the same spot it disappeared in a previous youtube export before I tried the copy/paste method. I don't have the original footage; I'm making color correction changes to an edit; so I'm not sure if the second half of the video is somehow corrupted, don't know how to check that, and not sure what to do if it is.
Another suggestion given to me was to delete the event my footage is in, then create a new event, re-upload all the footage into that one, and relink my project files to it. He also said don't delete my event and project folder at the same time, which I'm not even sure how you simultaneously delete two things on a laptop. I don't understand how this method would work though, since deleting the event makes my project disappear since it has nothing to link to. I'm scared to try this method since I don't want to lose my work; I really don't want to color correct it all over again.
Is there any way to successfully export the file suitable for youtube posting, or is this a bug in the system they haven't fixed yet?

Just turned off background rendering.
I'm not certain what you mean for specs in a specific point in the video, but here are the specs for the entire edit I initially received:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,083
Size: 951,735,770 bytes (951.7 MB on disk)
Here are the specs for the exported video that has the audio issue:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,274
Size: 966,817,082 bytes (966.8 MB on disk)
The video is 10:28 minutes long and the audio leaves at 5:57.
If that wasn't what you were looking for, just let me know. I'm not very good with technical stuff sometimes so may have misunderstood.
Is there something I should have done to the piece before I began color correcting it, like transcoding?

Final Cut Pro X Exported Video Size

I've recently bought Final Cut Pro X and use it for editing videos before uploading to YouTube. I used to export my videos from iMovie as a .mov file to my hard drive to then manually upload to YouTube. There doesn't seem to be this option in Final Cut, so I've taken to using the YouTube share feature but it never uploads so I just manually upload the .mov file that it saves somewhere in the Final Cut shared files folder.
The problem I have is that I export a 720P file so assumed that the video size would be 1280 x 720, it always was with iMove. I've found that Final Cut spits out the video at 1248 x 702 and this is quite annoying as it sometimes cuts off the top and bottom of a video. Is there any reason why it does this or any way to get it to export at the correct display size?

How can I change the size? Normally I export at 720P in iMovie and the video and format are both 1280 x 720. I did a screencast using Quicktime and due to the change in display size it's chopped off the toolbar at the top and a small portion of the dock. I've had to resize the clip in Final Cut to 95% of the original size to get it to fit in the 1248 x 702 size that it chooses to put it in.
As this was only a screencast the file size tends to be this small, but normally I shoot at full HD on my camcorder and the video can be about 10 mins in length. I used the export media function and the resulting file was about 8GB in size! iMovie would typically give me a .mov file anywhere between 700MB - 1.5GB depedning on the length of the video and that suited me fine, but there doesn't seem to be any way to get it that small using the Export Media. Not much of a problem really coz I'm fine using the YouTube share option to get what I want.

Final Cut Pro x Exporting

My final cut pro will not allow me to export to quicktime or youtube. It says " The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)" What does this mean?
It has only down this for about a week. I have tried to delete the application and download it again and nothing has worked.

Try trashing the preferences.
Corrupt preferences can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.

Import from Final Cut Pro not working correctly

I have a very simple project in FCP. (Ver 6) It is a HD clip that is about 5 min long with 7 chapter markers.
I exported the project as an XML file and imported that into Premiere Pro empty project.
I wind up with two assets, a .mov with same name as the .mov in FCP and a sequence with the same named sequence in FCP.
Right clicking on the .mov and selecting "New sequence from clip" creates a new sequence with the .mov on the timeline.
There are no markers.
Right clicking on the sequence asset and selecting "New sequence from clip" creates another sequence with the same name and the .mov on the timeline.
The markers are inside the .mov and audio tracks, not up on the top ruler line where markers appear when manually adding markers.
The keystrokes to move to markers do not work.
The "Clear all Markers" function is greyed out , like it is when no markers exist.
If a "Dynamic link to Encore is performed, there is no markers in Encore.
If you enter chapter markers manually and look at the project file (an XML file) you will see indexes with the chapter points , durations and names as children named "Markers" with attribute"ObjectID='22'.under "//PremiereData"
Following , in sequential order, are subsequent objects "Markers", ObjectID='23" through "ObjectID=n
However, if you look at the project file after importing a FCP project, this same function occurs, except that it is "Markers" "ObjectID=30 with the indexes and marker data 31 through n (further down in the file). This area is empty when adding the markers manually in Premiere Pro.
FYI , the project file is littered with the word "Marker" and "Markers" throughout the file, only their attributes make any node unique.
I am at 99.9 &% finished with a VB program to create / modify nodes, values and attributes, except that the XML date changes format at the node named "//WorkspaceSettings" so I am not able to edit values to make a file that will not crash when opening.
I would very much like the import from Final Cut Pro to work, or someone explain how to work with the nodes under "//WorkspaceSettings"
Thank millions for a solution.

It's a 2007 iMac with 2.4 GHz Intel Core 2 Duo. I had been using Final Cut Pro without any problems right until I upgraded to Yosemite. I'm hoping that upgrading to Yosemite doesn't mean I can't continue using Final Cut Pro - that would be extremely frustrating.

Final Cut Pro X -- Export is Low Quality?

I'm wondering about some of the behavior on export with Final Cut Pro X.
While editing my videos, I set preferences to 'use proxy media' to make playback smoother.
However, when I go to export the video as a high-quality 1080p file it's clear that Final Cut is using the proxy files to make this video -- rather defeating the point of exporting at 1080p. Now, it's not a problem if I switch playback in preferences from 'use proxy media' to 'use high quality media' -- then the export is actually high quality.
My question is this: is final cut supposed to work this way? Why on Earth would it not default to use the highest quality files when exporting? It's not a huge deal, but it is annoying when I spend several hours exporting a project only to find out at the end that I accidently left playback on 'proxy media' and have to restart the process.

I've read a few threads on this issue. Are you using the share feature or exporting to compressor? My understanding is when you export you need to set to original or optimize setting in preference.
More about this topic here.
https://discussions.apple.com/thread/3166556?start=0&tstart=0

Final Cut Pro Render/ export crashes

hello everyone,
i've been working on a very lengthy project which i am trying to finish up on final cut pro 5 but the problem is final cut is being extremely difficult and will not get through rendering or exporting a single thing without crashing. i don't know if it's ridiculously poor programming or the lack of a plugin that might be the problem. the details are that i recorded myself drawing on photoshop using snapzpro with apple's animation codec and set everything up in pro so that my drawing is time-lapsed and all i have to do now is render and export. i rendered the project once before and it went fine overnight, but it failed to render the cropping i had put in so when i came to render it again and it does nothing but crash, sometimes at 2%, sometimes at 0%. That colour wheel starts turning and never stops (even 9 hours after leaving my macbook) and this even happens when i try to render 2 seconds worth of footage (force quit also says final cut is not responding). truth be told i am extremely frustrated with final cut right now and would appreciate any support i could get on how to get this god awful thing to just work.
i tried using fcp rescue and closing all unnecessary programs but nothing worked. i just don't get why it rendered the first time through and now decides to crash all the time.
plz help, and thx.

You have two problems.
1. As David noted, you are running a non compatible version (PPC) of Final Cut Pro on your intel machine. This is not supported and will cause all sorts of quirky behavior. The only way to solve this issue is to upgrade to a universal binary version.
2. The animation codec is intended as a means to transfer files between programs in a lossless manner. It is not intended to be edited on low power machines and CERTAINLY not on the system drive. Things may work better with an edit friendly codec.
As far as the general crashing, there is no telling at this point whether your files are simply corrupted, the preferences are corrupted, the non-intel nature of the program is causing the crashes as you stress the process during renders or what.
If it is a corrupted file - pay attention to where the render fails. THe files around that point are suspect.
If it is a corrupted pref file, use a program like FCP Rescue 5 to delete the FCP preference files.
Good luck.
x

Final cut pro not exporting to youtube?

Similar Messages

Maybe you are looking for