Final cut pro problem when exporting with quicktime movie

Hello!
I must have som help beacuse my musicmovie must be finsihed untill today. I have a movie their i had used filters like colour correction and interlace. When i export with USING QUICKTIME CONVERSION and have
keyfram 10
bitrate 6000
faster encode
size 1920x1080 HD 16:9
its not a problem the movie works fine all the way.
But when i export with QUICKTIME MOVIE it dosent work. Some clips are frozen and some are beeing misscoloured. None of them have interlace. Its the same clips that dosent work everytime i had export with QM. I have tried to replace these clips but the same thing is happening. I dont understand why i cant use quicktime movie but it works with quicktime conversion.
If you have an e-mail i can send you just the part where this happening.
Please help me!
Thanks Gabriel

I am also expriencing the same error. Tried every solution listed so far:
1. Switch off background rendering. Trash render files. Don't render. Export.
2. copying the project within Final Cut Pro into another project
3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
What's going on?

Similar Messages

  • Final Cut Pro X share fails with QuickTime Error -50

    Hello!
    I'm facing a very annoying issue when trying to share my project from Final Cut Pro X. It used to work perfectly fine but now I'm getting consistently "QuickTime Error -50" after FCPX exported about 10% of my project. This can be reproduced with other project as well - one time I was able to export by restarting my machine but not anymore.
    My configuration is a Mac Pro early 2008 with a ATI Radeon 5770. The only recent change I did to my config was to upgrade my old graphic cards to the Radeon 5770: do you think this can be the cause of this error?
    Thanks for any help,
    Jean

    I am also expriencing the same error. Tried every solution listed so far:
    1. Switch off background rendering. Trash render files. Don't render. Export.
    2. copying the project within Final Cut Pro into another project
    3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
    Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
    What's going on?

  • Final Cut Express Quits when exporting using Quick Time conversion to MPEG2

    I'm new Mac user and I'm trying to compress a movie from Final Cut Express HD when exporting using Quick Time conversion to MPEG2 format when I do that Final Cut application quits.
    and if helps you to answer I have the same problem trying to do the same from iMovie HD and from Adobe Premier 6.5

    "exporting using Quick Time conversion to MPEG2 format"
    I'm not sure how you can get to that point: I cannot even find MPEG2 in my list of compression types while exporting with QuickTime Conversion... (I have 31 of them, and QT 7 Pro installed).
    In any case, if you want to make a DVD and have iDVD installed, you have simply to Export/QuickTime Movie (without conversion): iDVD will take care of compressing your movie for you before burning the DVD.
    Piero

  • Final Cut Pro does not export

    I'm having problems exporting with Final Cut Pro. When I go to the share menu, export movie simply does nothing, and if I try to export directly to vimeo or apple devices, it gives me this error: com.apple.Compressor.CompressorKit.ErrorDomain error -1. I checked in Applications and I have compressor, and if I open it, it works just fine. Already disabled the app nap in both final cut and compressor and it solved nothing.

    You don't need to render before export.
    Rendering is for playback.
    If your project plays OK from the storyline, you can safely turn off rendering in preferences.
    Andy

  • HT3775 I am downloading a Final Cut Pro x project directly to Quicktime.  The movie will not play, stating Quicktime doesn't support the codec. I currently am using Quicktime 10.1 on my Mac OS X Lion

    I am downloading a Final Cut Pro x project directly to Quicktime.  The movie will not play stating Quicktime doesn't support the codec. I currently am using Quicktime 10.1 on my Mac OS X Lion

    Wow. Okay...
    I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
    My only comment would be re: your computer specs:
    BJReis wrote:
    .  This may be due to somewhat older equipment:
    GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
    To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
    4GB is right on the edge, IMHO. 16G is ideal.
    I wish you luck, hang in there, and standby for more help.

  • I am thing of using Final Cut Pro but when I try and download I get the message "Your computer's video card does not meet the minimum system requirements." Can I do anything about this?

    I am thing of using Final Cut Pro but when I try and download I get the message “Your computer’s video card does not meet the minimum system requirements.” Can I do anything about this? I am using a Mac Pro early 2008 with Yosemite 10.10.2. My current graphics card is a ATI Radeon HD 2600 XT 256 MB.

    Geoff2T wrote:
    I am thing of using Final Cut Pro but when I try and download I get the message “Your computer’s video card does not meet the minimum system requirements.” Can I do anything about this? I am using a Mac Pro early 2008 with Yosemite 10.10.2. My current graphics card is a ATI Radeon HD 2600 XT 256 MB.
    It is just as the message says. Your video card is not compatible.
    You can add a compatible graphics card and use FCP X with your mac.  I can't suggest which one, but maybe other people on this forum can guide.
    And you may also get good suggestions in the Mac Pro forum.

  • When i open final cut pro x  when it starts loding the projects it shows the spining beach ball and is stuck wat can i do?

    when i open final cut pro x  when it starts loding the projects it shows the spining beach ball and is stuck wat can i do?

    Possible  corrupted project or media fies. Here's what I'd suggest.
    First trash preferences. If that doesn't work…
    Move your Final Cut Projects folder into a folder named Hidden Folder. See if FCP then launches. If it doesn't hide your Final Cut Events folder. Once FCP launches successfuly, create a test event and project.
    To track down the problem, successively move load events and projects from hideen to their proper location and open FCP. When and if you get the crash you have hopefully located the problem.
    The easiest way to do this is to purchace Event Manager X ($5).
    Good luck.
    Russ

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If you purchase Final Cut Pro X at the Mac App Store, you can install it in all your Macs free of charge as many times as you want. The same applies for all the applications you purchase at the Mac App Store

  • Final cut pro x dvd menu with personal backgrounds and music?

    is it possible to create with Final cut pro x dvd menu with personal backgrounds and music?

    THANKS Tom!  I miss my NERO... ;-)  ... At least personal background... Can you burn the DVD then directly from final cut or do I need another program to burn...? Cheers...

  • Will final cut Pro 7.0 work with ATI Raedon X1600

    Will Final Cut Pro 7.0 work with a ATI Raedon X1600 Graphics Card

    If you want to check other applications for compatability:
    http://roaringapps.com/apps:table

  • I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera.  Can anyone suggest the best camera (in the 5-10,000 dollar range) ?  What hardware and software should I include in the package?

    I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera.  Can anyone suggest the best camera (in the 5-10,000 dollar range) ?  What hardware and software should I include in the package?

    This is quite an open suggestion, but here are some ideas which might get you started.  There are good HD cameras in your price range from Sony, Panasonic and Canon (and maybe other manufacturers). Tapeless formats vary.  I have only worked with Sony XDCAM which seems pretty good to me.  File sizes for material shot at 35MBS are not too huge and, with the free Sony transfer and conversion programme, are easy to bring into the computer via USB direct from the camera or from a fairly inexpensive converter.  The Sony XDCAM EX3 can produce results well up to broadcast quality.
    As to hardware, you'll need a powerful MAC - iMac, Macbook Pro or MacPro with 4GB or more of RAM and a good video card.  Softwarewise, FCPX is quite a bit cheaper than FC Studio 3 and of course it's 64bit and can make better use of multi-core machines than FCP7.    It's also designed to handle HD formats with less hassle than FCP7 and is matched to the latest versions of Motion and Compressor.   But you'd probably be wise to search reviews of FCPX before you make your choice - it has some issues.
    A good HD monitor will be essential and, for colour correction etc, you may want to consider a second monitor or HD TV foe editing. ( A MacPro is generally the best machine to connect a second monitor to). 
    This should give you a good editing system, but there are many other things you could add (Photoshop, professional sound monitors, etc)
    Hope this helps a bit.
    Jonathan

  • Can you help me, i try to import video from my gopro to final cut pro but when i play the video he become very slow and i lose qualiter

    can you help me, i try to import video from my gopro to final cut pro but when i play the video he become very slow and i lose qualiter ???

    Right click one of yur clips in the event browser and choose Transcode Media. Make a test project and playthat clip. See whether that solves your lag.
    Russ

  • Help! My final cut pro won't export or share

    My final cut pro won't export or share just keeps saying 'The operation could not be completed. (com.apple.compressor.compressorkit.errordomain error -1)
    Anyone got any ideas how to fix this?
    Thanks

    Is App Nap disabled for FCP X? In finder, select FCP X, get info, uncheck the app nap box.
      We need to knwo alot more in order to be abvle to help you - What ver. FCP X? What ver. OS X? Your hardware?
    Look at these links:
    http://www.larryjordan.biz/fcp-x-advanced-trouble-shooting/
    http://www.lafcpug.org/Tutorials/basic_fcpx_share_export.html
    http://fcpx.tv/Pages/shareexport.html
       can you post a screen shot of your open app? What are your project settings? What are your export settings?
    Good Luck --

  • Final Cut pro crashes when any effect is click in the effect window HELP!!!

    Final Cut pro crashes when any effect is click in the effect window HELP!!!
    I have video placed in a sequence and when I go to the effect browser to click on a effect to drop on it the program thinks for a few seconds and then quits. I tried dumping the pref files in the pref folder and it did not work. is there a different method I should try?

    #44: FCP acting weird - Trash Prefs
    Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
    If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
    1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://www.fcprescue.com and run it.
    http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
    2) Open the Disk Utility and Repair Permissions.
    3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
    4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
    Shane

Maybe you are looking for

  • Unexpected database connector error---- Error code:-2147467259

    Hi, I am using Crystal Report for Eclipse 12.2.208). My rpt file contains a command with a simple sql query In eclipse I used this rpt and generated the Jsp file to export the report to Pdf format But exception is thrown in the following line of Jsp

  • Free Goods - PRODH1 and PRODH2 are not populating

    Hello, We setup the Free Goods and created new access sequences with PRODH1 and PRODH2. While the whole PRODH is working, PRODH1 and PRODH2 are not. They don't seem to populate in KOMP. Which user-exit we need to populate them in? Thank you!

  • When I connect my iPhone 4, iPhoto opens, but no device or import window option opens?

    When I connect my iPhone 4 running ios 5, iPhoto '11 (9.2.1) opens, but the phone does not show up in the sidebar as a device and no option to import the photos pops up. How do I get iPhoto to show my iPhone as a device so that I can import pictures

  • How do i get artwork to show on every album

    in itunes, i have successfully assigned the artwork to all my albums, has taken me ages! but ive done it. however, it only shows it for one of my albums wen ive taken the ipod out and looked to see if it has worked. how do i get it to work for all my

  • OLAP DML program 10g Help!!

    I have a OLAP DML program that I am invoking as follows call pmtdim_user_sec(_aw 'MG_OU' 'OPERATING_UNIT') The intent is to use the OPERATING_UNIT or parameter in 3rd place as a condition for cursor in the program. e.g. below for the sql for cursor.