Final Cut Pro project cut off in Quicktime after export

I made my edited movie in Final Cut Pro 4.0-about 3 min long- After I exported it as a "Quicktime Movie) left the compression and self contained boxes unchecked--and checked DV NTSC 48 Khts..It plays better and with enhanced resolution than using "default" settings --It cuts off about less than a minute of my movie when viewing it in my Quicktime Player... Please Help!
i book G4 Mac OS X (10.3.9) Laptop

Have you done a Spotlight search of your system?
Russ

Similar Messages

Showing a Final Cut Pro project to an audience - from Final Cut or Quicktime?

I've created a 13 min Final Cut Pro project to show at an Awards Ceremony of our college. Is it better to show the video directly from Final Cut or to export it and show it from Quicktime? What's the best quality output?

hi,
its not about quality. Since you can export out at the same quality as prorez. Its about performance. Since fcpx has to combine multiple sources, audio, graphix, video etc, then combine them al into a whole, there is far more that could go wrong. Always export out a finished mastered rendered file and play that. Just make sure that the computer playing the file back can handle it. ie if you chose an uncompressed codec to export out as, the computer may not like playing it back. Choose a prorez or h264 codec, they will be fine.
hth
adam

Can't Update Old Final Cut Pro Projects

I use Final Cut Pro for work and just recently updated. I didn't realize that I needed to have all my projects in my "Final Cut Pro Projects" file while updating. I had a lot of my projects in a "Final Cut Pro Projects-Not In Use" file when I updated my Final Cut Pro and now those projects will not update. I didn't have a "Final Cut Pro Projects" file after updating so I created a new one under "Movies" in my Finder and added all the projects to that and Final Cut Pro still won't update them. What am I doing wrong?
Also, now that I've updated the projects are exporting as .MP4s and my boss wants them as .MOVs again. Is there a way I can change them to that?

I have been trying to add a screen shot to this reply for the past ten minutes but I keep getting "An error occurred while trying to submit your post. Please try again" So I will try to explain it to you.
I click the arow on the bottom right hand corner. Then click "Master File..."
My settings are:
Format: Computer
Video codec: H.264 Better Quality
Resolution: 1920 x 1080
Audio file format: QuickTime Movie (AAC)
(don't click Include chapter markers)
Open with: QuicTime Player (default)
On the bottom it reads left to right:
1920 x 1080 | 23.98 fbs Stereo (L R) | 48 kHz 00:00:04:02 MPEG-4 movie 10.4 MB est.
Then I click "Next..." and save it to my Desktop and click "Save"
I hope that makes sence! Sorry the screen shots didn't work!

How do you import final cut pro projects into imovie? (like you create a pr

How do you import final cut pro projects into imovie?
(like you create a project in final cut but i want to save it, and import it into imovie..

Hi -
Mr. Ross is right, there is no direct way to export your project with all it's elements into iMovie.
If, on the other hand, you have a completed sequence in FCP that you want to export as a finished element, then import into iMovie for you to re-edit or apply titles, music, etc. you would:
In FCP:
Click on the Sequence Icon you want to export in your browser.
Go to the menu File > Export > Quicktime Movie. Give your movie a name a navigate to where you want it stored. Make sure you choose Settings: Current Settings and have the Make Movie Self Contained checked. Click Save.
Close FCP and open iMovie.
In iMovie:
Go to the menu File > Import > Movies and navigate to the movie you just exported from FCP. Choose if you want your movie imported in it's original size, etc.
Click Import. Your movie will be imported into iMovie.
Note that using this method only gives you only the elements that made up your FCP sequence, so this may not give you the flexibility you need.
Hope this helps.
MtD

How to save Final Cut Pro project to an ftp server to then open on a different computer

Hello, I work for a graphic design firm that also does video production for businesses. We are using Final Cut Pro X in our office which has an FTP server connected to all office computers.
What we want is to be able to have on employee start a project in Final Cut Pro X, save it to the server; then have another employee open up the same project and continue working from a different computer.
Right now, we have a lot of our Final Cut files saved to the server, and the files will show up in the server on the other employee's machine. BUT, we scroll in the server to the file for the Final Cut Pro project on the other computer, and the file is grayed out, unable to be opened on the new computer.
I've tried right clicking and choosing "open with Final Cut" and Final Cut does then open, but right before it opens the project within Final Cut, a message comes up saying "The document could not be opened. Open documents from within Final Cut Pro," which of course, I see no way to do that from within Final Cut Pro.
I've also called Apple Care, they reminded me that we can't have one project open on two computers at the same time, and that's fine. We are willing to close the project on computer one to then open on computer two.
If you have an answer let me know. We don't want to have to load onto an external hard drive to then load onto the other machine, especially since we have a server ready to go.
Thanks for your help.

You can share projects via the ftp server, but you need to:
1) Have all the media in identical events on each editor's machine;
2) Set up the project and share the entire folder for that project first;
3) Afterwards, you can share just the project file itself
You CANNOT work directly on projects and events stored in the ftp server.
See Steve Martin explain how to do all this: http://www.youtube.com/watch?v=Hu-ga7fxKh8

I need to burn a Final Cut pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn one just using Final Cut Pro? and can I go through IDVD?

I need to burn a Final Cut Pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn a project just using Final Cut Pro? and can I go through IDVD? ( oh and how can I finalize the project?) Thanks!

I did that already it it only burned one section of the project. How do I export a master file? Can i just save it on the computer then take it to IDVD? Thank you so much for helping me!

I need to export Quicktime files using the PhotoJPEG, MJPEG-A, or DV codec. Is this possible in Final Cut Pro X? In the options under export I don't see any of these available.

I need to export Quicktime files using the PhotoJPEG, MJPEG-A, or DV codec. Is this possible in Final Cut Pro X? In the options under export I don't see any of these available. I'm a newbie to this so any help would be greatly appreciated.

I'm importing .MOV files from my Canon 5Dmk2 at 1080p. So should I just export using a different codec and then use Compressor or MPEG Streamclip to convert to an MJPEG-A or PhotoJPEG codec?

Converting a Final Cut Pro project into one Final Cut Express HD can read..

Is there any way I can convert a final cut pro project into something i can open in an earlier version of final cut, namely final cut express HD?

Tim,
Unfortunately you can not go from FCP to FCExpress. You can go backwards from say FCP7 to FCP6 or FCP 5 using XML's. The XML version depends on which FCP you have.

Open Final Cut Pro project in Logic Pro for audio editing

I want to open a Final Cut Pro project i'm working on into Logic Pro without having to export my large FCP projects to video all the time. Is there any way of doing this?

Thanks for replying to my question, I did mean Logic Pro but I'm relatively new to these programs. What's the difference with Soundtrack Pro and Logic Pro exactly? If I understood you correctly, Logic Pro would be the program I need since I need to create audio from scratch. Just to be more clear again, I want to see my video while composing audio at the same time but without having to export my video all the time since it takes long, being a big file. Thanks again for the reply.

Importing Final Cut Pro Projects

I know this might be a very silly question but -- when watching the tutorial for DVD Studio pro5, they imported a Motion Project that had not been rendered, it in turn got rendered when burning it to DVD. Is this possible with Final Cut Pro Projects?? Can I take a project or sequence and import it into DVD Studio without rendering or exporting it??
In other words can DVD Studio use the Final Cut Pro Project just as a reference as it does with Motion or does it need to be one file??
Anyone out there who can help me please?? Thank-you

You cannot import FCP project. Just mov files, or m2v files. I believe only Motion works as you said.

Motion 3.02 - cannot open any final cut pro projects

Please help. Motion won't open any Final Cut Pro projects, and I've been training to learn Motion, I'm stuck on this lesson because I can't open a FCP project. All FCP projects are greyed out when I go to Open in Motion, and even if I right click the project file and Open With and force Motion to, it cannot open the file. I can "Send To > Motion" in FCP and that works, but it's not the same.
I have FCP 6.06, both are part of Final Cut Studio 2 Academic version. Not that my FCP version matters, because the CD provided in my Motion 3 training book gave me a (probably) FCP 6.0 project file, even when I updated it, it won't work. Not even my old old FCP files from previous versions can open with Motion.
Much thanks.

But it can be done the other way, perhaps you reads about that. Motion files can be imported into FCP and used just like regular clips.
adam

Sharing and EDITing Final Cut Pro Projects...

I'm trying to Share Final Cut Pro Projects between separate User Accounts. The originator of the Project saves to the Shared Folder, which should allow others to not only read, but Edit the files. Unfortunatley, the Scratch Files (video) within the Project always looses it's connection when the Second User connects and trys to edit the Project.
Is their an easy way to Share the Projects so that Others can both Read and Save Changes? Does the Second User always have to rename the file to get it to save back to the Shared Folder?
Thanks for any Help! !
AppleJack_1

Hello and welcome to the forum.
It's always been my understanding that you could open a project created by FCE in FCP, but not the reverse. I fear you may be out of luck.

Final Cut Pro X 10.0.03 crashes on export. What can I do?

Final Cut Pro X 10.0.03 crashes on export. What can I do?

PROBLEM SOVED.
1. From "show project library" under Window, highlight the project in question.
2. Under file, select "delete project render files."
3. Choose delete "all project render files."
4. Close down FCP X and relaunch.
5. under Final Cut Pro go to "preferences" and make sure "background render is checked."
6. Load project into the timeline.
7. Alow FCP X to render the entire project without interuption. Make sure all other applications are shut down and that "energy saver" is turned off under Apple "system preferences."
Export worked smoothly and quickly without shutting down. Thanks for all of your help and tenacity Ian.
M

Final Cut Pro X share fails with QuickTime Error -50

Hello!
I'm facing a very annoying issue when trying to share my project from Final Cut Pro X. It used to work perfectly fine but now I'm getting consistently "QuickTime Error -50" after FCPX exported about 10% of my project. This can be reproduced with other project as well - one time I was able to export by restarting my machine but not anymore.
My configuration is a Mac Pro early 2008 with a ATI Radeon 5770. The only recent change I did to my config was to upgrade my old graphic cards to the Radeon 5770: do you think this can be the cause of this error?
Thanks for any help,
Jean

I am also expriencing the same error. Tried every solution listed so far:
1. Switch off background rendering. Trash render files. Don't render. Export.
2. copying the project within Final Cut Pro into another project
3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
What's going on?

Can you open a Final Cut Pro project file (6.0.6) in Final Cut Express (v4)

I am working on a project in Final Cut Pro (v 6.0.6) and I need to pass it off to a colleague who only has Final Cut Express (v 4). The media in the project is DVNTSC.
I went to the Apple store at the Stonestown Mall in San Francisco today and they assured me that my colleague would be able to open my FCP project file in his FCE program... but I'm skeptical.
Can you really open a FCP project file in FCE?
Could somebody who has both confirm this for me?
Thanks,
Sam

Under very rare circumstances can you open an FCP project in FCE. It almost never works and is not supported by Apple.

Final Cut Pro project cut off in Quicktime after export

Similar Messages

Maybe you are looking for