Final cut pro sudio 5.1 and mac pro
does anyone have any complaints on running final cut pro sudio 5.1 on a mac pro?
does anyone have any complaints on running final cut
pro sudio 5.1 on a mac pro?
HI,
I do experience problems with my fcp 5.0.1. i was told to get the upgrade crossgrade universal and my issue would be resolved. you have 5.1 and you still have problems. what are they? and were you able to solve them? thanks
sandrine
MAC PRO Mac OS X (10.4.8) MacPro; 1,1; Dual-Core Intel Xeon; 2.66 GHz; 2 Processors; 4 cores: Memory: 2 GB; Bus Speed:1.33 GHz
Similar Messages
-
What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?
What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?
Hello Andres. I own an Early Mac Pro 2008, and have had the blessing of using both FCP X & Motion 5 for some time now. This is a pritty open question and it depends on your usage and the throughput nessesary to handle your work load. I can share what my set up is, & it may help you deside if this is enough power for you or help you move in another direction. Keep in mind that the buss speed and cpu are a big part of helping FCP X more so than the video card, although the video card does come into play here as well. Now if you are wanting to run Motion 5 as well, the video card is Almost Everything, and you need the biggest and best situation here that the throughput on this system will except. I'm running 14 gig of system ram, and the video card is an ATI Radeon 5870. For FCP X, running 1920x1280p footage optimised in pro-res 422, she can move along with some render time nessesary when dropping on the timeline, also filters, transistions, titles ex, have a bit of a laps time to render, but then she runs ok. This wait is not as much of a challenge with this set up as with Motion. I need a much bigger gpu on the video card for this app. Not sure if this computers throughput is really worth the upgrade. Beleive this though, Motion is demanding on using ALL you can give it. It is a Genious App, and it also calls for ALL THE POWER YOU CAN GIVE HER IN A VIDEO CARD. Conclution: if you are just starting which it sounds like, even a smaller video card than this can work For FCP X. Make sure you have at least 8 gig of cpu ram. 12 or more will help here. Also make sure the card is OpenCL compadible.....& this is in the thread above,,,,,,,,
-
Final Cut Express HD 3.5 and Final Cut Pro Studio 5.1.1
Hi,
I have a client with both of these installed on the same machine (running 10.4.6).
When they try and launch either application, the splash screen comes up, loading various filters, etc. then they get an error message:
"File Error: A file of this name already exists" "OK"
Clicking "OK" closes the app.
Any idea:
1. What the file in question is?
2. Can it be deleted to let the app run?
3. Can Final Cut Express HD 3.5 and Final Cut Pro Studio 5.1.1 be used on the same machine?
I'll post this on the Final Cut Pro thread too (but with the order reversed).1. No idea.
2. Depends what the file is.
3. Yes. Though I've never tried to run them at the same time. -
working with final cut x (10.0.9) on macbook pro want to add compressor cannot download 4… where can I download 3?
It has been available at some online retailers (Amazon) and EBay – but only as part of the discontinued Final Cut Studio suite. It would be cost--prohibitive to buy and there are other more cost-effective solutions. Depending on what you need to do, MPEG Streamclip might be a (free) solution. There are others – Episode, for example, which is not cheap at $500– but less than haf the cost of buying an used copy of FCS.
Another approach (and the one I would follow in your situation) would be to install Mavericks on an external, bootable drive. Run a copy of FCP 10.1 and Compressor 4.1 from that drive.
Good luck.
Russ -
Can't Get MacBook Pro and Mac Pro to Network
I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
Thanks in advance for any ideas you might have on how to fix this.I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.
-
Adobe Acrobat 9 Pro on both my Apple Mac Pro and Apple MacBook Pro
I think I found the answer to my question: "May I install my copy of Adobe Acrobat 9 Pro on both my Apple Mac Pro and on my recently purchased Apple MacBook Pro?" I think my question was answered in reading the text of the agreement for use of this site in the following:
"You may activate the Software on up to 2 devices (or virtual machines) at a time, if these activations are associated with the same Adobe ID for the same individual, unless stated at http://www.adobe.com/go/activation . However, you may not use the Software on these devices simultaneously."
If this is correct, would you confirm. I know how security conscious Adobe is with their software.
Thank you! Be Safe!
KenHi kennethf71183385,
Thank you so much for asking! Yes, you are entitled to activate your copy of Acrobat on two computers. Please see Activation & Deactivation Help - Adobe Support for more information about activating Adobe software!
Please let us know if you have additional questions.
Best,
Sara -
Final Cut Server is for video and photo archiving?
Too many products in the last few years. I used to use iPhoto to archive both photos and video and edit them. Now I have moved to the professional line but it gets more confusing.
Aperture2: archiving and cataloguing thousands of pictures with minor edits
Adobe CS4: major edits to my pictures
FCP6: video edit but with no archiving and/or metadata capability
Final Cut Server: for what? Can it archive/metadata all my video and all my Aperture files and work
seamlessly between all these four programs?
Please help. I am considering buying Final Cut Server. I am both a photographer as well as a videographer running many different cameras over many different kinds of shoots. And I am trying to simplify my work process.
Thanks,
BrianWe were in a similar situation as well.
We use Adobe products for photo and desktop stuff
and FCP Suite for video.
We ingest images with Bridge and add keywords.
The raw files are backed up and the corrected images
are processed (Photoshop/Image Processor) and dropped
into a Final Cut Server watch folder.
This action automatically adds the files to FCS for
easy access as well as backs up the images to an
external FTP in our desktop publishing office across
town. Desktop has its own version of FCS that adds
the new files and makes them available for designers.
When we shoot video we shoot mainly with Sony EX3
camcorders with SxS media. Footage is downloaded
and tagged in XDCAM Transfer. The folder that is
labeled "Import" in the utility is also a watch
folder which added the files to FCS.
So in other words Final Cut Server has us organized
and working together much better than we were before. -
Hey,
I have Final Cut Express 4.0.1 and a JVC everio camera.
Whenever i try to import my files to FCE via "Log and transfer", it just doesn't do anything, as if FCE doesn't know the camera is there,
please help !FCE 4.0.1 can only capture DV/HDV which is produced by cameras using Mini-DV TAPES and cameras shooting AVCHD which is a high definition format.
If your camera shoots standard definition on Memory Cards, DVDs or Hard Drives it will not work in FCE.
What is your camera's exact model name and number? -
Is it OK to use USB 2.0 connection for Glyph external drive and Mac Pro as project drive?
Is it OK to use a USB 2.0 connection for Glyph external drive and Mac Pro as project drive? I was told by Sweetwater tech support to use Firewire, but both the FW400 and FW800 connections crash my audio interface software mixer (Presonus' "Universal Control" software).
Both Firewire connections also create a 10 second hang for each Command-Save that I do.
USB 2.0 for the external drive seems to be working so far, but is there some reason I should be wary of using this as my go-to project drive? In other words, I am imagining that there was probably some definite reason that the tech support guy mentioned not to use it. But maybe not. It's a brand new Glyph. In any event, it's nice to have the 10 second hang eliminated, and I was just looking for some advice, since digging into the Presonus software issue could take some time.If you have a mac pro, why not stick the external HDD inside via one of your many SATA cables & have it run 9 times faster than your USB?
Or stick a HDD CADDY in your mac pro, so you can slot in a full sized 3TB HDD for recording, and when you are done, pull it out & slip it in an external enclosure if you need to take it places? -
I have an academic version of Final Cut Studio on my laptop and recently purchased the most recent Full version of Final Cut Studio. Do I need to uninstall the academic version before installing the new version? I ask because this is not an upgrade, but a completely new version.
I'm with Jim on this. It always seems to work out better if you do not install over another version. You can use this app (freeware - thanks to Jon Chappel) to completely remove ALL Final Cut Studio apps and components: http://www.digitalrebellion.com/fcsremover/
Once that's done, install your newly purchased version.
-DH -
I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?
The Mac Pro - the desktop computer - does not support Airdrop, if that's what you mean.
Matt -
My Final Cut X changed behaviour after conneting the external monitor via HDMI. Several times after restarting Final Cut X was very slow and it always kept repeating rendering on same three clips after every restart. Later the dual screen icon disapeared on the top of my screen and it stops rendering on every restart like before and the machine was normal and faster. Now Final Cut won't start anymore whenever I start it loads and crushes immediately on every restart.
Upgrade FCPX
-
Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feed
Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feedback. I had a powermac before this with the speakers and it worked fine. But the mac pro is having these issues. Is it the firewire port or the speakers or (and most likely) just a firmware glitch with mac pro? Anyone else see these issues?
http://web.mac.com/jerimydulay/Site/MyAlbums/Pages/Lacie_FirewireMIDI.html
Here is my audio settings. For some reason I wish I could remember what I did. It was actually the Apple Store tech in the Unversity Village in Seattle that gave me the idea and I swear I had to change the settings in MIDI setup. Now that Leopard is out it seems the MIDI stuff has been redone. I included screenshots of my MIDI setup as it is currently to see if you see something different on your computers. Let me know! -
Using Compressor 4, How do you create a droplet to transcode from final cut files to mp4, mp3 and m4v formatting?
Take a look at this section; it's pretty clear.
Compressor offers settings for each of the output formats you want. (For example, the m4v sttings for Apple Devices.)
Good luck.
Russ -
I opened my account on the MacAir and have the new Mountain Lion showing i purchased. When I open my account on my other two machines it does not show. Any suggestions on why or how to fix?
iMac and Mac Pro
ThanksSADLY not as i downloaded an upgrad to my original PAGES/
i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
but what a waste of time as it doesn not save any changes done automatically back in the cloud....
i am now downloading the new LION and hope that it will fix the problem
i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
and the same magic was supposed to happen in reverse.
It doesn't/
if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
I hope the new lion will help resolve the isssue/
any other ideas> keep em coming...thank you so much.
Maybe you are looking for
-
I'm using a netbook to sync my iphone and ipad. To upgrade to ios 5 it says i need 9 gb of space on my hard drive and i only have 7. I have another drive on my netbook that has 30 gb free. How do i get itunes to backup my ipad to that drive?
-
Insert Document name at bottom of first page
Is there a way to insert the document name as automatic text at the bottom of the first page? This was a simple "automatic text" script that Word has had for years. All of our documents are saved with names relating to what the document is and where
-
ORACLE PM - cannot handle attribute href - SOAP style encoded
Hello ! The problem is, can ORACLE Process Manager handle href attributes. I call a webservice with a BPEL-Process, the webservice replys a message, but the Process Manager cannot handle the message from the webservice. This is the reply message from
-
With apology for the rookie question, I can't seem to figure or find an answer to my question... I'm trying to clone from one layer (photo) to another layer (photo), and simply want an exact pixel-to-pixel replacement. For instance I'd like to copy
-
Position keyframes for titles not acting properly; keep moving backwards near end keyframe
I have no clue what in teh world is going on here. i will set a keyframe in the beginning for the titles initial start point. Move ahead 2 seconds. Set a keyframe. Move the title to where I want it. Play it back, and then right before the end keyfram