Final Cut Pro to Flash  -- Inserting and Using Cue Points

I want to export a flash video using File - Export - Using Quick Time Conversion and selecting Flash. Under options for Flash, I see something about "Cue Points".
My assumption is that these would be points that you can insert that are similar to chapter markers and that you could have the Flash player on a web page jump back and forth between them.
Does anyone know of any documentation on inserting these points in Final Cut export? I couldn't figure it out. It looks like you give them a name and a timecode. I could not enter the timecode.
How about over on the player side? I assume some sort ActionScript in Flash is required. Has anyone seen a simple example/tutorial of these capabilities?

Apart from disabling time machine, iCal and any other programs or applications from taking focus. Time machine and software updates can certainly be told not to try as far as I recall.

Similar Messages

  • Can I download final cut pro X trial version and use final cut pro 7 during and after the trial period ?

    My company uses Final cut pro 7 and I have to know if we can try Final cut pro X on one of our G5 and, in the case of we can't switch to FCPX, if we can use FCP7 again without re-initialise it. Thanks
    sorry for my english. it's not my maternal language.

    You cannot use FCPX on a G5. It's Intel only.

  • I have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a white it says share successful but i cannot find where the movie has been saved???need help

    i have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a while it says share successful but i cannot find where the movie has been saved???need help--i cannot find the destination. can this be changed.it used to go to itunes, home video.thanks, dimitrios

    EExactly what settings are you using. Some go to iTunes.

  • I have purchased Final Cut Pro for my imac and now want to put it onto my macbook air so I can use it when away from my desk. How can I do this

    I have purchased Final Cut Pro for my imac and now want to put it onto my macbook air so I can use it when away from my desk. How can I do this

    I took away my backup disk with me so just took it from there excellent. I am back home at present working on my imac. When I go to use my macbook air on these projects (when away on boat) is it easiest to simply copy the Project and Events folders in total from my imac onto the other machine and do the same upon my return in reverse? I don't use icloud

  • Is OS X Lion compatible with Final Cut Pro 6.0.6 and Digital Performer 6.02

    I'm currently running OS X 10.6.8 and my Final Cut Pro 6.0.6 and Digiital Performer 6.02 work fine. 
    I want to upgrade to OS X Lion to take advantage of iCloud but I do not want to have to upgrade the FCP or DP programs.
    Are my current versions compatible with OS X Lion?
    Thanks,
    Brett

    See my tip:
    https://discussions.apple.com/docs/DOC-2465

  • Is Final Cut Studio with Final Cut Pro 5 still relevant and usable?

    Is Final Cut Studio with Final Cut Pro 5 still relevant and usable? I bought it about four or five years ago and never started learning it, but would like to start learning editing now. Thanks.

    That is the version I have. What formats can I work with in FCP 5.1. For example, can I edit movies from my Nikon Coolpix 7900 point and shoot that is about five years old? My Panasonic DV camera that is also about five or six years old? Will I be able to burn these types of footage to disc once edited and watch them on a DVD player. Thanks for your former replies.

  • LATINOS ARE SCREWED with final cut pro x. Everytime I use tildes like  á  for example. FCPX freezes and restarts.... really is a bummer. And on a side note, Color Curves? 3 Wheel Color Wheels? XML support? Can´t wait for multicam. God Bless!

    With final cut pro x. Every time I use tildes like  á  for example. FCPX freezes and restarts.... really is a bummer. PLZ FIX. Here in Colombia I can not use FCPX for projects which involve names or text. (ALL PROJECTS)
    And on a side note, Color Curves? 3 Wheel Color Wheels (color board is great, but i didnt read a 400 page book on 3 wheel color correction for nothing) ? XML support? Can´t wait for multicam. God Bless!
    FCPX IS GREAT. It really is. Just a few features are required.....

    w andrewfromjupiter wrote:
    Tildes can be both
    I think the idea that an acute accent can also be called a "tilde" is total nonsense.
    http://en.wikipedia.org/wiki/Tilde
    http://en.wikipedia.org/wiki/Acute_accent
    But good idea to report the bug here:
    http://www.apple.com/feedback/finalcutpro.html

  • Tried to use PixelMator as default external editor but iPhoto has only final cut pro as external editor and won't let me change?

    I tried to set up Pixelmator as external iPhoto editor bot only option in Preferences> advanced> edit photos is iPhoto or Final Cut Pro?

    You have previously set FCP as the external, editor - in the iPhoto preferences select FCP again and a window will open for you to find and select Pixelmator - if that a photo editor ?
    LN

  • So I bought a Used copy of final cut pro 7, but i cant use it because I need a serial number and the serial number that came with it doesn't work. What do I do?

    I bought my copy from ebay and when i got it I installed it, but every time i click on final cut pro 7 it asks for a serial number and when i put the on that came with it, it tells me it an invalid serail number. It is kinda making me want ti throw my mac out the window and just stick with windows.

    First, find out if you bought an "Upgrade" version, or a "Full" version.
    If you have an "Upgrade" version, it will require two serial numbers to work - first, the serial number of the last "Full" version you are upgrading from, then the serial number of the "Upgrade" software you are installing.
    If you have bought a "Full" version, see this KB article with help entering serial numbers in the Pro Apps:
    http://support.apple.com/kb/TS2005
    MtD

  • How do I take Final Cut Pro off one computer and move it to a new one?

    I'm using Final Cut Pro Academic, and I can only run the program on one computer. If I'm getting a new computer, how do I move the program from my old computer to my new computer? Is there a way to "deauthorize" my old computer? If there is, I can't seem to find it.
    Any help you could give would be greatly appreciated.
    Thanks,
    Doug

    Excellent! Do I need to do anything to ensure the the program installs on the new computer? Do I need to make sure the computer is connected to the Internet when I uninstall the program from the old computer?

  • Final Cut Pro 10.1.1 and older iMac

    Final Cut Pro 10.0.9 runs very well on my 2008 iMac & Snow Leopard.
    Will there be any problems running FCP 10.1.1 & Mavericks on this computer?

    I believe my computer is identical to yours and although the card is not supportd it still works OK
    If yours does not work at all you can still use FCP X 10.0.9 which is almost identical to 10.1.1 except for the new Library system  .  .  .  .  I'm sure the old FCP X will do more than you will ever need.
    If you are desperate to use the latest FCP X on Mavericks but can't afford an iMac, you could get a Mac Mini complete with third party 24" monitor for half the price of a 21.5" iMac.
    The Mini may not be quite as fast as the latest iMacs but it will be a lot faster than your old one.

  • Can not turn on the AV Output with Final Cut Pro 10.1.1 and IOS 10,2,9, Who can help me

    Non riesco a attivare A/V Output con Final Cut Pro 10.1.1 e Mavericch 10.9.2

    First, Mavericks is an OS X version, not an iOS version.  iOS is for mobile devices, OS X is for Macs.
    Second, what is the specific input/output device your Mac is using for A/V Output to access?
    Have you gone into the Preferences, into the Playback section, and in the "A/V Ouput" menu, what device A/V Output is suppoed to use?  Then, go to the Window menu and turn on A/V Output.
    If none of that works, you have a compatability issue.  Verify with the manufacturer you have the latest drivers, and that it is compatible with OS X Mavericks 10.2.9 and FCPX 10.1.1.

  • Final Cut Pro 5.1.2 and Protools Mbox2

    Anyone have both of these running on an Intel mac? I have these setup on several edit stations, but only have problems with the two intel macs crashing when using Final Cut Pro and using the mbox2 for monitoring audio output. All stations are set up indentical with OS 10.4.9 running

    ALSO deleting PRefs doesnt help!--> FCP rescue and so on
    ....

  • FINAL CUT PRO HD 4.5 AND TIGER 10.4.3

    Can any of you smart people tell me if I can use Final Cut Pro HD 4.5 with Tiger 10.4.3. Unfortunately I installed Tiger before installing Final Cut 4.5. Yes, it sounds crazy, but it is a long story. I can't afford FC 5, so it has to be 4.5 for now. I heard there was only one compatibility issue with 4.5 and Tiger, something to do with Desktop Previews or something and a quick patch/fix was available for that. Can anybody help me. Thank you!!
    G5 2.0   Mac OS X (10.4.3)  

    I'm running 4.5 on 10.4 without any issues....
    Most, if not all, of the difficulties come from funky Quicktime7 installations.
    You may want to bookmark the following apple knowledge base article for future reference.
    http://docs.info.apple.com/article.html?artnum=301852
    x
    Do your part in supporting your fellow users. If a response has been Helpful to you or Solved your question, please mark it as such as an aid to other lost souls on the forum.
    Also, don't forget to mark the thread Answered when you get enough information to close the thread.

  • Final Cut Pro 4:  Problems exporting video using QuickTime conversion

    just recently updated my Mac to version 10.4.11 -
    Ever since, Final Cut Pro won't let me Export my video using QuickTime Conversion.
    Its starts exporting, then freezes at 79%. A general error message pops up.
    I know its not a space issue, because I have 20GB left and the video i'm exporting is only 2 GB.
    I installed all the software updates.
    Can anyone help? Do I need a new version of Final Cut?

    1) this is the final cut express forum not the pro.
    2) 10.4.6 is not the latest, try updating to 10.4.11
    3) after any system update you must run disk utility to repair permissions or errors that may not have been addressed during the upgrade process.
    4) have you tried exporting as a reference movie then playing it in qtpro, if ok then export.
    5) what are you trying to export too?

Maybe you are looking for