Final cut pro will not save

when i go to save my project it says operation not allowed. it was letting me when i started working on my project but now it wont. how can i fix this. this project is very important and i have hours of work on it.

i also tried the auto save vault the last auto save file is old and there is still hours of data not in it. i also looked at the system preferences settings and the memory of data is set ok and the alloed space so there should be enough room and there is still gigs of space on my HD.

Similar Messages

My final cut pro will not update on my iMac, it will update on my Macbook.

my final cut pro will not update on my iMac, it will update on my Macbook. I have OS X Yosemite on both systems, my macbook has final cut pro x version 10.1.4 and my iMac shows no updates available and is on version 10.1.1. I have tried looking in iTunes for the same update that is installed on my macbook under the same iTunes account, but it doesn't show any updates. I tried deleting from my iMac and it won't delete so I can reinstall it. any suggestions?

You need to be logged into the Mac App Store with the same Apple ID in order to see your updates. You speak about iTunes: maybe you meant that just as an expression to refer to your Apple ID, but just in case you didn't: you do NOT use iTunes to download mac software. You use the App Store application, available under the Apple menu.

HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Sorry for being unclear.
When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list). I will already be logged in with the Apple ID I use for everything (my dev account). I will be able to update all of the other various applications needing updating except for my Final Cut Pro. When I click the update button next to the FCP update, it will give me an error saying "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite. FCP was working fine until the upgrade. Is there anything that can be done to fix this?

HT4589 After Yosemite Final cut pro will not run and says there are no updates available.

OS X Yosemite caused Final Cut Pro to not run until upgraded. Says there are no updates available and will not let me install it - says I already have it.
Boxed in and can't move. Now FCP v 10.1
OSX v 10.10
Jim

FCP (10.1.3) works just fine on 10.10.. try to trash FCP then re install.

Final Cut Pro will not open

I broke it. After I did, I tried to uninstall it, but did not make a difference.
First I tried Delete User Preferences and could not find Final Cut Pro User Data under the Preferences folder. Now even com.apple.finalcutpro.plist does not exist. This is most likely because the application will not open and get to the point where it would care new User Preferences. After I uninstalled the program the registration page popped up and I re-registered so com.apple.RedFinalCutPro.plist is there, but nothing else.
So pretty much I open the program. The white box that says final cut pro and has ‘loading’ with words flashing past under it pops up. Then the words stop flashing and the white box disappears. At the same time Final Cut Pro disappears on the loading dock.
That is all I know. It is really really broken.
PowerBook G4 Mac OS X (10.3.9)

Not sure if this will even remotely help, but I had the same problem.
I reset my scratch disks, waveform cache, thumbnail cache, and auto save vaults, and it fixed the problem. One of my hard drives came unplugged while I was working. It threw my scratch disks all outta wack. FCP would open then close, like you said. So I shut off one of my hard drives so it would open the box that tells you your scratch disk is missing. Thats when I reset them.
I'm curious as to how you "broke it" to begin with. Maybe we can better help you if we know.
Hope you get your problem taken care.

My final cut pro will not launch, I keep getting Final Cut Pro quit unexpectedly

I've done everything to deleting preferences and plug ins to re installing it, someone please help me with this problem

No luck at all, ive done everything thinkable and this is what i get in my report
Process:         Final Cut Pro [284]
Path:            /Users/ConGar/Desktop/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier:      com.apple.FinalCutPro
Version:         ??? (???)
Build Info:      FCPApp-906181654~22
Code Type:       X86 (Native)
Parent Process: launchd [78]
Interval Since Last Report:          53967 sec
Crashes Since Last Report:           20
Per-App Interval Since Last Report: 0 sec
Per-App Crashes Since Last Report:   20
Date/Time:       2011-06-22 12:40:21.298 -0400
OS Version:      Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: FB70EBC0-C946-4694-AE72-9D861D7E5486
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Application Support/ProApps/SharedA/Frameworks/ProFX.framework/Versions/A/ProFX
Referenced from: /Users/ConGar/Desktop/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Reason: image not found

I have just downloaded Yosemite but Final Cut Pro will not work can you help

Hi, I have, two days ago, updated my Mac with OS Yosemite only to find the programme Final Cut Pro no longer works. Can you explain please
imac 27" Mid 20l1
Processor 3.1GHZ intel core i5
memory 4GB 1333 MHZ DDR3
Please do not get too technical. Thanks

Glad you got it going.
I might suggest reading up on it starting here
http://www.fcpxbook.com/updates/101/
as the new version is very different from what you're used to.

Final cut pro will not open in maverick

After upgrading to Maverick and the latest version of Final Cut Pro X (10.1) I can't open Final Cut no more. In the dock it says: Application not responding.
I have a iMac with 3.4 GHz i7/32 GB. Please advise. Thanks.

Try remove and reinstall FCPX…
http://support.apple.com/kb/HT5149?viewlocale=en_US&locale=en_US

My final cut pro will not open

i click on the application and the loading screen comes up and then it disapears and will not open the interface of final cut and all i see is the desktop any suggestions

First thing to try when anything bad occurs is to trash the preferences using this free app
http://www.digitalrebellion.com/prefman/

Final Cut Pro Will NOT Launch

Everything was fine yesterday. Now it quits after the FCP launch screen. It goes through loading all the plugins, then when the graphic disappears, the program quits and you're back at the finder.
Any suggestions on how to remedy this? I'm using version 5.

Have you tried the Sudo Shuffle (although I believe this is usually a solution when FCP isn't even getting as far as the plug-ins.)
1. Save any files or work you may have open, because you'll need to restart the computer after these steps.
2. Open Terminal (found at /Applications/Utilities/).
3a. In 10.3.9 or earlier Type: sudo update_prebinding -root / -force
3b. In 10.4.0 and later sudo update_prebinding -root / -force -debug
4. Press Return.
5. Enter your password when prompted.
6. The prebinding operation may take a few minutes. When it is complete, a new command-line prompt will appear. When this happens, please quit Terminal and restart your computer.
(Don't forget to Restart.)

Final Cut Pro will not export

I have finished my project, no errors, all rendered and ready. When I go to export it it wont export. When I press command + e, it doesnt do anything. When I try anythin else, I get this error message: (com.apple.Compressor.CompressorKit.ErrorDomain error -1). What do I do?

You probably need to update the software.

I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

Hi Carsten...good luck with your project.. I had just about as many Video8 & Hi8 tapes as
you that I digitized and eventually brought into FCPX..took me many months not weeks
to do so,BTW, as each tape was 60-90 minutes in lenght...and many hundreds of
gigab ytes of storage ( uncompressed AVI files)..it's tedious work unless you plan to farm
it out to a processing house...also regarding eventual storage format...remember
Hi8 is 400 lines or about 540X480 in todays resoultion metrics..you can't make hi-def out
of source that starts out as 400 lines...in my case I rewrapped the avi files into .mov
containers and imported the mov files into FCPX where I got rid of the hundreds of
minutes of Colorado mountain landscapes to get to that one minute shot of the kids
on horseback ( late 80's for most of my archives)..so its a job..scouring thru 30X90 min
of source to not miss those precious memories takes diligence and hard work but its worth
it; eventually I encode the uncompressed video I want to save in H.264 format Staandard
Def not HiDef

Final Cut Pro does not work with Yosemite. Can it be fixed?

Final Cut Pro does not work with Yosemite. Can it be fixed?

Hi Tom, I don't know if you can help me.
I'm using Final Cut version 10.1.4 with Yosemite 10.10.2 and whenever I open FCP it opens for about 5 seconds (not allowing me to click anywhere) before closing with the message "Final Cut Pro quit unexpectedly. click reopen to open the application again. This report will be sent to apple automatically." I have tried opening it multiple times and the same thing has been happening over and over again and i've tried everything I could find on the internet and nothing is working.
HELP.
Jada.

Which version of Final Cut Pro will work with Mac Book 10.75?

I can not put Final Cut Pro 9 on my Mac Book 10.75 (Lion).
Which version of Final Cut Pro will run on Mac Book 10.75 (Lion).
Thanks

Ok, first, your questions's answers:
FCS1 had a full version & an upgrade from any version of FCP. You only need the serial # handy when installing FCS upgrade.
Now FCS2 has TWO upgrade versions: one was for FCS1 ($499), the other was from any version of FCP ($699).
NOTE: Academic and Not-For-Resale (NFR) versions are not eligible for upgrade.
http://gizmodo.com/252425/apple-rolls-out-final-cut-studio-2-first-impressions
Here's something else to consider: with the march away from the PPC as a whole & your upgrade cost to FCS3 is $299, I would be very careful how much you spend for the older copies.
If FCS1 or 2 is too hard to come by or cost what it did originally (or more), you may want to consider picking up a (used or new) Intel Mac with ATI or Nvidia graphics. even the newest mini might surpise you & get you by until you can afford something else.
Good luck!

My new mac book pro will not save any bookmarks I make in safari. Why is it doing this? I would really like to use my bookmarks.

MY new Mac book pro will not save any of teh bookmarks I make in safari. If I make a bookmark, it will not appear until I close safari and reopen it. Then, if I shut my computer down and reopen safari, all of the bookmarks are gone. This has happend multiple times and I don't know what is going on. I would really like to use my bookmarks.

Delete the
com.apple.safari.plist
reboot and start Safari, reset your preferences, instructions are here
Deleting the System Preference or other .plist file

Final cut pro will not save

Similar Messages

Maybe you are looking for