Final Cut Pro X and Mac Caption Site Licenses

How much does it cost for a site license for Final Cut Pro X and Mac Caption?  I need to have one computer going for production and one for training someone.  Is there 501C-3 pricing available?

FCP X can be used on as many Macs as you own.  Be sure each is logged in to your iTunes/App Store account.  So for two Macs that you own, you can download to both, only pay for one.
There is a bulk license deal for it, but you'd need to be running 10+ Macs before you'd get any discount or anything.
Mac Caption is an issue you'll have to take up with them.

Similar Messages

  • I have two "MACs" and Final Cut Pro 7. I need a license to use this same software on both "Macs" How do I get it?

    I have two "MACs" and Final Cut Pro 7.
    I need a license to use this same software on both "Macs"
    How do I get it?

    You don't. You can install the same copy of FCP-7 on two macs (as long as you own both macs). You can't operate both copies at the same time.
    MtD

  • I am a final cut pro user and i recently started using adobe premiere pro. for anyone firmiliar with fcp, there are interesting ways of doing introductions on it and im wondering if anyone could tell me if premiere pro has preset introductions i can use

    i am a final cut pro user and i recently started using adobe premiere pro. for anyone firmiliar with fcp, there are interesting ways of doing introductions on it and im wondering if anyone could tell me if premiere pro has preset introductions i can use.

    Singenu wrote:
    I tought about looking in Monitor Activity to see what happens...
    Well, when I start working (should I say try to work with FCPX, activity monitor in the %processor column for FCPX jumps rapidly over 100% and reaches more than 200% ??? What the **** is that ?
    200% or more is not strange. Remember that your mac has 4 cores (you say it's 3 months old, so I assume it is a new model), so 200% amounts to using 2 of these 4 cores to the max.
    Regarding the question of creating a new admin user: while it sits in the same system, it may help if the problem is caused by some user-specific preferences or settings. Not likely in your case, since you seem to have reinstalled from scratch, but still it is worth a try. It takes 5 minutes and may help pinpoint the problem.

  • Final Cut Pro x and Compressor 992 hour to process

    I edited a 1 hour-40 minute video, on Final Cut Pro X and processed using Apple's Compressor.
    I have tried different Operating Systems (Mavericks and Mountain Lion) on two different Mac Computers.
    IMac 2.8 Mhz and Mac Book Pro (both 2008)
    It has been transcoding to create video to run on Apple Devices, for over 6 days now, and it shows that it will take 992 hours to process.
    The same video, some months back, with Mountain Lion, took a couple of days to process.
    Question: Why is it taking this long now?
    I have tried to get a DVD done, different types of output; none have succeeded.
    I guess Apple, has made adjustments to their Operating Systems, to basically render this computers inoperable, forcing customers to buy their latest Mac models.
    Yes, I went to the "Genius Bar" at Apple (twice), first they told me to increase the memory, which I did; even though months ago I had videos processed without extra memory.
    The second time at the "Genius Bar", after I had installed extra memory, they had nothing to say, except that "they had a friend" with the same problem, but after "the friend" bought a new Mac, the problem was resolved.
    I called Apple support and was told to "reset PRAM", which I did. Still the problem persists.
    Any ideas?
    http://www.flickr.com/photos/brankoab/12089286396/

    You don't mention how much RAM is in your machines, nor what are the versions of FCP X and the OS.
    These can make a lot of difference. If you are trying a long export with very little RAM (and I must say 4GB is *very little* RAM), then it can get bogged down tremendously. Do you have at least 8GB?
    How much free RAM is reported in Activity Monitor?
    Are you using Mavericks or a previous version of the OS? Mountain Lion was notorious for slowing down to a crawl in such circumstances.
    Give us more info, so we can better help.
    In the meantime, you might consider exporting just a small section of the movie (use I and O to mark an in and an out point in the timeline) and see how fast it goes; keep Activity Monitor open while you are doing it.

  • Final Cut Pro X and Videocam compatibility

    I am ready to upgrade to Final Cut Pro X AND to buy a new videocam.  I like the features of the Canon Vixia HF S30 (especially the viewfinder, not available in cheaper cameras), but neither Canon nor Apple will reassure me that this camera is compatible with Final Cut Pro X.  Has anyone tried this camera with this software?
    Thanks.
    Grandma C

    What we need to know:
    The Mac model, how much RAM, type and specifications of graphics card, version of Mac OS X, amount of free space on the main drive, version # of FCP or FCS that you are attempting to install, with a list of the disks included in the box.

  • How can I make Final cut pro 7 and Yosemite work?

    Hi dear Apple.
    I have this huge problem with Final cut pro 7 and Yosemite.
    I have tried to install it on a Mac book pro that has Yosemite but it doesn't work.
    I have an I mac with finalcut pro 7 working on Lion but I need to upgrade it to Yosemite to be able to use CC Adobe.
    I have a feature film worth 6,7 million SEK with Final cut pro 7 and I can't translate it to XML files to premiere cause it is in its last editing process. I get an error everytime I try. Also the last version of Fcp (X) ***** for a professional editor. So.. My only option is to finish this film in Fcp7.
    How can I use Yosemite and still be able to keep Fcp7?
    Please help me or do something about this issue soon. I bought fcp7 for 11000 SEK at the time that was quite expensive. 

    Hi Meg the dog! Thanx for answering!
    I know it was left to die 4 years ago. I just think its ****** up.. I work with documentaries and it takes quite a while to finish. I have done one for 6 years now. If I had known that Fcp7 was left to die I would never had started to edit 6 years ago...
    I did try this recommended on the forum by another user:
    Go to the app location in finder, CTRL click on the app and choose [Show Package Contents]. A folder [Contents] appears, click on it and choose [MacOS]. You'll see a Unix executable. Double click, you'll start Terminal. At the same time fcp will launch. After fcp is launched, close terminal and confirm when asked. Now fcp is up and running. Close fcp and the next time, just open fcp the normal way. DONE!
    But it doesn't work for me. I can't launch fcp7.
    I have Fcp7 Installed on my I mac and I wonder if that will effect fcp7 if I upgrade to Yosemte?
    I tryed to export XML to work on premiere and this is what happends:
    Any recommendations? I am going crazy here..

  • Hi, I accidentally deleted a project in trash. How do I get it back into final cut pro X. It is still sitting in trash,

    Hi, I accidentally deleted a project in trash. How do I get it back into final cut pro X. It is still sitting in trash.

    If your working on an external hard drive, just drag/drop back in the Final Cut Projects folder, and re-open FCPX

  • I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

    I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

    Here are the min. system requirements.... it looks like you meet them.... but I may have missed something...
    Final Cut Studio 2 (Including Final Cut Pro 6)
    • A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
    • 1GB of RAM
    • An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
    • A display with 1024-by-768 resolution or higher
    • Mac OS X v10.4.9 or Mac OS X v10.5.5 or later
    • QuickTime 7.1.6 or later
    Additional Recommendations
    • 2GB of RAM when working with compressed HD and uncompressed SD sources
    • 4GB of RAM when working with uncompressed HD sources
    • A display with 1280 x 1024 resolution or higher
    Additional Requirements for Motion
    • A standard or built-to-order system configuration with a NVIDIA GeForce 5200, FX Go5200, FX 5200 Ultra, 6600, 6600 LE, 6800, 7300, 7300 GT, 7800, 7600 GT, 8600, 8800 or Quadro class graphics card.
    • A standard or built-to-order system configuration with a ATI Radeon 9800, 9700, 9600Pro, 9600XT, 9700Pro, X800, X1600, X1900, or X2600 class graphics card; or a ATI Mobility Radeon 9700 or 9600 graphics card.
    • For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM.
    Additional Requirements for Color
    • The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac, or 2.5GHZ or faster Power Mac G5 Quad:
    • ATI Mobility Radeon X1600
    • ATI Radeon X1600
    • NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6800 Ultra DDL, 6800 GT DDL, 660, or Quadro FX 4500.
    • For 32-bit rendering: a graphics card with at least 256MB of VRAM.
    • A display with 1680-by-1050 resolution or higher (excluding 20" iMac); dual displays are highly recommended.
    • A three-button mouse for full functionality
    Apple article on Final Cut Studio 2: http://support.apple.com/kb/SP535

  • MBP with retina display always crash when using Final cut pro x and iMovie. Plz l need help

    HI, My MBP with retina display always crash when l am using Final cut pro x and iMovie and come up with gray screen. Plz l need help

    Take it back and get a refund. What are you waiting for, your new Mac does not work correctly.

  • I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

    I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

    It's also under the File menu.

  • Final cut pro crashed  and will not open back up..

    Final cut pro crashed and now when I try to restart it, all I get is a spinning wheel….any suggestions?

    Hold Option-Command when you launch the application to reset the preferences.

  • HT4664 Can I use final cut pro X on " Mac mini" ?

    Can I use final cut pro X on " Mac mini" ?

    depending on what model: for sure yes, it does!
    I did use FCPX on an old MacMini, c2d, 2.26GHz with 8GB Ram (using proxies made editing easy).
    My actual work-horse is a MacMini i5, late 2012, 16GB Ram, plus some ext. usb3 drives = perfect for my needs! (costs vs. power)
    I'm using two cheap 2.5" Toshiba 1TB usb3-drives, combined with MacOS' built-in DiskUtility as a Raid0 = 150mbps for under 100€ ... not professional (=raid0 contains a small risk of data loss), but again: best €-vs.-HP ratio

  • Question about Final Cut Pro X and miniDV's

    Hi,
    I'm thinking in buying Final Cut Pro X and use it to import and edit many hours of footage that I have on miniDV's tapes.
    I've heard that to work with miniDV's, Final Cut Pro X is not great, especially regarding timecode, etc. True?
    Any thoughts and advises? Many thanks!

    My experience is if you're shooting SD then you shouldn't have a problem unless you are trying to load a full hour. When I tried that, the computer went crazy and loaded the video as thousands of clips just a few frames long.
    That was supposed to be for a multicam shoot. I went back to FCP 7 where I've never had a single problem after at least 80 multicam projects with as many as eight cameras.
    I'll have to try it again in FCP X now that there have been two updates since my last try.
    I've also used HDV mini DV tapes shot with a Canon HV40. The video looked great in FCP X and I had no problem with clips that were 2-3 minutes long.
    I did not load my HDV clips as ProRes in FCP X because, when I did try it, they looked like total crap. I was afraid my finished exported video would also look like that.

  • Final Cut Pro X and 7 on same system

    I am using Final Cut Pro 7 and I was not very keen on Final Cut Pro X when I tried it out.
    However, I have just learned that it could be advantageous workwise if I am prepared to work on some FCPX projects.
    I'm just curious to know if it is safe to run both applications on the same system; e.g. do they share preference files? Do they use the same plugins folder etc.?
    I know that in the past (and I mean the distant past) I have had problems trying to run different versions of the same software in the same machine and I'm too comfortable with FCP7 to just leap into working with an application about which I got an unfavourable impression and which many fellow professionals have told me instigated a move to Premiere.
    Can somebody give me some definitive advice, please?

    Alf Megson wrote:
    I
    I'm just curious to know if it is safe to run both applications on the same system; e.g. do they share preference files? Do they use the same plugins folder etc.?
    Yes it's safe and no they don't use same plug-ins.
    I'm running FCS3 and FCPX, Motion5, Compresor 4 on two systems. No problems.
    Bets would be to follow these steps – the same start-up explanation.
    Russ

  • Final Cut Pro X and the Road to **** (and back again)

    Hi Guys,
    I have an interesting article on FCP X by Rick Young. Real world experiences.
    Final Cut Pro X and the Road to **** (and back again)
    http://www.kenstone.net/fcp_homepage/fcp_x_road_young.html
    --ken

    A very interesting article Ken, especially the comments about compound clips within compound clips.
    I've never experienced the horrific problems some folk have claimed but then I never put compound clips within compound clips.
    In  fact, until today I had never made a compound clip! 

Maybe you are looking for