Final Cut Pro X audio

Hello, I am currently attempting to edit a video of my guitarist and myself playing a song. I just finished filming the guitar and put the song together in Final Cut Pro X. What I need to do now is take that audio file, and save it; so I can put it in a different program to put a metronome to it, which will make recording the drums much easier. Can anyone tell me how I can save the audio file by itself?

Share to Master File and in Settings select audio only.

Similar Messages

Final Cut Pro 7: Audio Stops when clicking outside the program.

Just something that annoyed me and was wondering if their is a way to correct it. Whenever I am listening to a song within final cut in a video or in the viewer, it will stop playing if I click out of the program. For example i might be listening to a song and want to go do a google search or open another program and as soon as i do the audio stops. It will begin playing once i click back into final cut and everything works fine but its just bothersome. If anyone knows a way to change this please help me out!
Thanks
Josh

well, I think if I remember correctly that might be a normal state, because FCP wants to "take over" completely. My systems are on MacPros with Kona Cards and I/Os setup for 5.1 output. I think I lose audio because the Kona wants only one app controlling it at a time. I'd have to be sitting in front of the box to figure it out. But oddly enough I'm actually home.

Final cut pro 4 audio filters problem

Hi,
I know there are a lot of discussions about this on these forums, but I can't find the solution.
Here's my problem:
I have installed FCP 4 and a USB mixer connected to my Powermac G5 (early 2005). When I start up FCP with the external mixer connected it crashes when loading audio filters, but when I disconnect the mixer it starts up just fine. Here's some info about my powermac:
Model: PowerMac7,3, BootROM 5.2.4f1, 2 processors, PowerPC G5 (3.0), 2.3 GHz, 2.5 GB
Graphics: ATI Radeon 9600, ATY,RV351, AGP, 128 MB
Memory Module: DIMM0/J11, 256 MB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM1/J12, 256 MB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM2/J13, 1 GB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM3/J14, 1 GB, DDR SDRAM, PC3200U-30330
Network Service: Ethernet (integriert), Ethernet, en0
Serial ATA Device: Maxtor 6B250S0, 233.76 GB
Parallel ATA Device: PIONEER DVD-RW DVR-109
USB Device: USB Keyboard, Logitech, Up to 1.5 Mb/sec, 500 mA
USB Device: USB Optical Mouse, Logitech, Up to 1.5 Mb/sec, 500 mA
USB Device: USB Audio CODEC, Burr-Brown from TI, Up to 12 Mb/sec, 500 mA
The last USB Device is the external mixer. Its a Numark M6 usb mixer
Thanks in advance
Fabian

Oh, too bad. But thanks anyways.
Fabian

Final cut pro x, audio and video problem

hi I converted a DVD video movie by DVD converter in order to use it in FCP but when i inport into FCP the audio and video does not line together, I mean the person will speak and the voice follows after. HELP PLEASE!!!

I used a media converter that I downloaded from apple store. I cant really see any option to choose the audio format, sampling .......etc the options on the converter are:-
1. Audio stream which is greyed out,
2. Output format {H.264 video, MPEG 4 etc.}
3. Video Quality { Highest, High, Normal, Lower, Lowest}
4. Audio Quality { Highest, High, Normal, Lower Lowest }
basically I have no clue how to do it I am a bit new in this world of computers, can you tell me how to to it
please
Thanks
Duncan

Final Cut Pro Flickering White Colors

I have video that was captured using a green screen with TriCaster. Because of poor lighting, the whites in the video are flickering and "noisy" while I'm editing in Final Cut Pro. Is there anyway to remove or cut down that flickering in Final Cut?

After upgrading from FCS2 to the current studio, All video placed in Final Cut Pro or Motion shows up as either black or white, sometimes with a few small color artifacts- as if the contrast had been turned up to maximum. This issue affects even the bars and tone generator in Final Cut Pro. Audio is unaffected.
I removed all installed files and receipts and reinstalled, issue is still occurring. I've also updated to 10.5.8 and run Final Cut under another user.
This issue is occurring on an iMac Intel Core 2 Duo. I have a fresh install on my Macbook Pro which is running without any issues.

Final Cut Pro 7 Master Templates are white!

I can't get Master Templates working in FCP 7. I see the templates if I browse them, I can load them up in Motion no problem. But if I try and view them in the viewer, or add them to the timeline, they come up white. I have uninstalled and reinstalled FCP 7 3 times today now, and can't seem to figure out why this feature doesn't work. I've trashed preferences, everything I can think of. Anyone else having this issue?

After upgrading from FCS2 to the current studio, All video placed in Final Cut Pro or Motion shows up as either black or white, sometimes with a few small color artifacts- as if the contrast had been turned up to maximum. This issue affects even the bars and tone generator in Final Cut Pro. Audio is unaffected.
I removed all installed files and receipts and reinstalled, issue is still occurring. I've also updated to 10.5.8 and run Final Cut under another user.
This issue is occurring on an iMac Intel Core 2 Duo. I have a fresh install on my Macbook Pro which is running without any issues.

I have been using Final Cut pro v6 without any problems but recently had to reinstall. Since then I can't open and view all my Quicktime clips. They appear white in timeline which means you can hear audio but not view picture. Any tips?

I have been using Final Cut Pro without any problems - v6 - for ages. I recently had a hardware issue and had to reinstall the software. Since then I can't open most of my QT clips in my fcp project. They appear as white clips - audio only no pictures. There are a few QT clips you can view as regular thumbnail images and they play ok. What's the issue? I have fcp v6.0.6 and QT v7. Any thoughts on what to do next?

Yes I did software updates which updated fcp to 6.0.6 and QT to version 7.7. That's as far as updates have taken me although i have requested daily updates. I forgot to say the clips don't play in QT view either. Again sound but no pictures when they are played.

Hi I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

What device?
What format?
How are you importing it?
Can you find the external audio with Finder?
Where is your destination file when you import it?
Andy

How do I revert to original footage in Final Cut Pro X version 10.0.9, for some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?

How do I revert to original footage in Final Cut Pro X version 10.0.9?
For some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?
Only the edited version which is no good without the audio?
Please Help

What format is your problem clip? Are there wave forms visible in the section without sound?
Right click on the clip in the event broswer and choose Reveal in Finder; open the clip in Quick Time to confirm that there is sound throughout at that stage of your workflow.
Russ

Burning a DVD from Final Cut Pro X via Compressor - No audio?

I have attempted to burn a DVD from a Final Cut Pro X project using Compressor, however the result was silent.
I used compressor because my FCPx project is in NTSC and my DVD is for air on Australian TV (PAL).
Image seemed to burn OK however there is no audio. Can anyone advise what I may have overlooked?
This is the first time I have used Compressor, and I am fairly new to FCP X.
thanks,
Geoff

Thanks Russ. OK, I am now rendering again via Compressor 4, this time I have 2 files in one tab - 1) a MPEG-2 and 2) an AC3 file. Seems to make sense.
To burn the DVD immediately after, I added a 'Job Action' to 'Create DVD' after the render, and the dialog confuses me. No problems with the 'Job Action' tab, but the "A/V Attributes" tab indicates the follwing:
Type: Final Cut Pro.app (shouldn't this be a reference to the rendered file/s?)
Video - showing the same dimensions of my FCPx Project file (NTSC ..640 x 480) instead of the MPEG-2 (Pal ...720 x 576).
Audio - Properties show Linear PCM... 6 channels, etc... not the AC3 file.
My question is, how do I create a DVD from the newly rendered files output from Compressor - is the Job Action the way to do it, and if so, how do I get it to reference the new files?
Thanks,
Geoff

Can I mute all audio from Final Cut Pro X?

Can I mute all audio from Final Cut Pro X so that I can listen to music while I do sorting, keywording, favoriting, etc? I'm doing a video where all the camera audio won't be used anyways, so I don't need to hear it in FCPX.. I'd rather just listen to my music instead. Thanks.

For clips in the timeline, andynick's suggestion works fine - temporarily disable the audio roles will play everything without audio and you just have to reenable these roles later.
For clips in the Event Browser, you can also disable and reenable audio for a bunch of clips all at once. Select the all the clips you want, open the inspector, click the audio tab and uncheck the box (for "stereo" or "mono" or whatnot) under "Channel Configuration". Again, to reenable just check this box again.

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

Audio from Final Cut Pro very very low

Hi guys I have not have a problem for awhile. A friend of mine recently move from DPS Velocity system to Final Cut Pro Studio 2 using a Intel Pro 3.2GHZ with all the bell and whistle, so I am giving him some training and tutorial. They have some footage in Velocity which I use MPEG StreamClip to convert to a DV file, I brought it in FCP (Three File one video and two audio makes one clip) it play in FCP Played ok when I export it to DVD studio Pro the audio is extremely low (barely audio able)I open the clip in QuickTime and it did not play. There is other clip in the project, some capture in FCP and others imports in FCP Studio, DVD Studio Pro and QuickTime plays these audio ok. The audio from Velocity are Wave files, I taught anyfile that plays in FCP would play in QuickTime. Does anyone knows how to solve this problem please to help I would like my friend to change both system to Apple and FCP thanks.

Wellcome to the forums!
when I export it to DVD studio Pro the audio is extremely low (barely audio able)I open the clip in QuickTime and it did not play.
I guess you encoded it to Dolby AC3 with Compressor, did you? Then you must chamge the standard Dolby preset as follows to keep the original FCP mix and level:
- Dialog normalization: -31
- Compression preset: none
And QT cannot play AC3 files.
Hope that helps !
Alberto

Best way to adjust audio on Final Cut Pro 5 Quicktime Export?? Render files

What is the best way to adjust audio on Final Cut Pro, Quicktime self-contained export? Please note all render files and orginals master clip are gone. So adjustments will need somehow be made to the exported Quicktime file.
As always thanks in advance for your reading and replying to my post,
Sebastian

Export the aiff file out of QT Pro, and import it into SoundTrack. Sweeten there

Audio won't follow in- point when exporting from Final Cut Pro

I am using Final cut Studio 2 on a Brand new mac pro which is connected to a an AJA IO pro box (not IO HD). If I set an in point on a time-line in Final Cut pro and send it to Compressor, only the video uses the in point. The audio starts from the beginning of the time-line. This is a huge annoyance and something I used all the time on my G5.
Does anyone have any ideas?
Thanks in advance for your help.

Yea that worked. I was mostly trying to debug it for my client today, since they have the same system I do, minus the AJA and I have no problems sending to compressor with or without marks. Is this a "known" bug or is something with the AJA setup?

Final Cut Pro X audio

Similar Messages

Maybe you are looking for