Final cut pro x dvd menu with personal backgrounds and music?

is it possible to create with Final cut pro x dvd menu with personal backgrounds and music?

THANKS Tom!  I miss my NERO... ;-)  ... At least personal background... Can you burn the DVD then directly from final cut or do I need another program to burn...? Cheers...

Similar Messages

  • Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
    I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
    Next step is to pan that pink noise around with my SPL meter to calibrate the room.

  • Final cut pro x/DVD studio pro

    A need an advice, I been using Final cut pro to edit my professional wedding videos and DVD studio pro to burn and make menus, can anyone recommend me another professional software to to create menus and burn DVD, my mac has an dvd drive built in, if I buy an external DVD burner drive, would I get better quality (on standard DVD's)

    I don't know why you want to change because Studio Pro is about the best software available.
    An external burner will have no effect on the quality of the DVDs.
    If you burn large numbers of DVDs an external burner might save wear and tear on your built in one.

  • If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If you purchase Final Cut Pro X at the Mac App Store, you can install it in all your Macs free of charge as many times as you want. The same applies for all the applications you purchase at the Mac App Store

  • Will final cut Pro 7.0 work with ATI Raedon X1600

    Will Final Cut Pro 7.0 work with a ATI Raedon X1600 Graphics Card

    If you want to check other applications for compatability:
    http://roaringapps.com/apps:table

  • I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera.  Can anyone suggest the best camera (in the 5-10,000 dollar range) ?  What hardware and software should I include in the package?

    I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera.  Can anyone suggest the best camera (in the 5-10,000 dollar range) ?  What hardware and software should I include in the package?

    This is quite an open suggestion, but here are some ideas which might get you started.  There are good HD cameras in your price range from Sony, Panasonic and Canon (and maybe other manufacturers). Tapeless formats vary.  I have only worked with Sony XDCAM which seems pretty good to me.  File sizes for material shot at 35MBS are not too huge and, with the free Sony transfer and conversion programme, are easy to bring into the computer via USB direct from the camera or from a fairly inexpensive converter.  The Sony XDCAM EX3 can produce results well up to broadcast quality.
    As to hardware, you'll need a powerful MAC - iMac, Macbook Pro or MacPro with 4GB or more of RAM and a good video card.  Softwarewise, FCPX is quite a bit cheaper than FC Studio 3 and of course it's 64bit and can make better use of multi-core machines than FCP7.    It's also designed to handle HD formats with less hassle than FCP7 and is matched to the latest versions of Motion and Compressor.   But you'd probably be wise to search reviews of FCPX before you make your choice - it has some issues.
    A good HD monitor will be essential and, for colour correction etc, you may want to consider a second monitor or HD TV foe editing. ( A MacPro is generally the best machine to connect a second monitor to). 
    This should give you a good editing system, but there are many other things you could add (Photoshop, professional sound monitors, etc)
    Hope this helps a bit.
    Jonathan

  • Final Cut Pro does not work with Yosemite. Can it be fixed?

    Final Cut Pro does not work with Yosemite. Can it be fixed?

    Hi Tom, I don't know if you can help me.
    I'm using Final Cut version 10.1.4 with Yosemite 10.10.2 and whenever I open FCP it opens for about 5 seconds (not allowing me to click anywhere) before closing with the message  "Final Cut Pro quit unexpectedly. click reopen to open the application again. This report will be sent to apple automatically." I have tried opening it multiple times and the same thing has been happening over and over again and i've tried everything I could find on the internet and nothing is working.
    HELP.
    Jada.

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

  • In Final Cut Pro x, Somehow my video got muted and I can't find a way to UNMUTE it! (it won't let me manually lift up or down the waveform - nor go in and raise the level of loudness) Any suggestions? (How to unmute)

    In Final Cut Pro x, Somehow my video got muted and I can't find a way to UNMUTE it!
    (it won't let me manually lift up or down the waveform - nor go in and raise the level of loudness)
    Any suggestions? (How to unmute)

    Do you know how to use the volume adjustment line?
    If so, is it not working?
    Can you post a screenshot of your audio?

  • HT5148 i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear. how do i get my video to play clear.

    i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear again. how do i get my video to play clear and not fuzzy?

    Same reply.

  • I purchased final cut pro studio but i reinstalled my os and cant final the serial number what can I do

    i purchased final cut pro studio but i reinstalled my os and cant final the serial number what can I do

    http://support.apple.com/kb/HT3866?viewlocale=en_US&locale=en_US
    http://support.apple.com/kb/ht1861
    MtD

  • Why does final cut pro x dvd burn take so much time?

    I have been trying to nurn a DVD and upload to YOUTUBE with Final Cut Pro X .......I have done this with ease many times before but now a 6 minute video is taking 3 hours to load fpr a DVD burn and ove 2 hours for YOUTUBE upload..
    I have the energy saver off on ,y imac, and my internet is very high speed.....Help!  Thanks

    Looks as though nobody has any ideas and as you have not given any details of your Mac or FCP X workflow it's not surprising.
    For a start, without knowing any details, you could try trashing the preferences with
    http://www.digitalrebellion.com/prefman/

  • Exporting from Final Cut Pro for DVD Studio Pro

    In the recent DVDs I've made, the quality seems lower than it has before. I don't think I've changed anything, but I was wondering what is the best format to export a clip from Final Cut Pro and the best way to encode those clips in DVD Studio Pro. Thanks for all your help!
    Erin

    The best and only format is mpeg2/m2v.
    The encoding rate for video is based on the length of the sequence in h/m/s.
    They should not be encoded in DVDSP, but exported as a self contained with current settings, no recompression and dropped into Compressor.
    Based on length and the type of footage, elect a preset for video and elect Dolby 2 for audio

  • DVB-C recorded DVDs to Final Cut Pro to DVD Studio Pro and Flash - how?

    As a TV journalist I am recording my works with my DVB-C Receiver and a DVD-Harddisc-Recorder from LG. The movies are stored on the harddisc and I burn them to DVDs in order to work with the files on my computer. What progrograms do I have to use in order to get file out of the DVD-vobs, that Final Cut Pro can read an work with. DVB-C is MPEG-encoded, right? But I don’t want to loose quality and don’t want to encode the material several times? In Final Cut I want to get rid of commerials and cut severel movies together that were broadcasted on several days. After that I want to get two differt files: 1. A flash movie form my website and 2. A file form my archive. With those files I want to complile DVDs with DVD Studio Pro for my customers later. Can anyone please give me a good and professional workflow to solve this common problem? Thanks a lot.

    What progrograms do I have to use in order to get file out of the DVD-vobs, that Final Cut Pro can read an work with
    MPEG Streamclip http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    -DH

  • IMovie to iDVD or Final Cut Pro to DVD studio pro "Better output"

    I recorded some family videos onto a computer with a WinTV pci board.
    Converted the MPEG2 to DV/DVCPro NTSC on my Mac with MPEG stremeclip.
    Used quicktime to divide the tapes/clips where we had switched recordings.
    Now i was going to use final cut pro but i am starting to like imovie 09.
    I want to take the clips and add simple fades mostly cross dissolve fade to black and just nothing something not noticeable. Then once I have combined the events reasonably. I want to put them onto DVD.
    Say our christmas videos
    One DVD with each year christmas event.
    And one for someone's birthdays through the years.
    If you need me to elaborate ill try harder.
    So should I use Final Cut Pro then have DVD studio make the DVDs Or iMovie 09 and iDVD 09. Which would have the best looking output.
    Oh by the way how can i remove the static feedback from the recordings I don't care which application i need tell me which one.
    If someone needs an example of the main sound i don't want ill post one.
    Note: I will be posting this in the Final Cut Pro forms as well.

    Since you have both, you should run both and see if you see a difference.
    I would expect that a $1,400 product would outperform a $20 product (= 1/4 of iLife).
    But the question is, How much better? and is it worth the extra effort to you? Only you can decide that.
    Another option for you to consider is you can edit in iMovie and export your project to Final Cut Pro in XML. Might be the best of both worlds.
    Message was edited by: AppleMan1958

Maybe you are looking for

  • Trying to understand this...

    Hello, im trying to figure out the function for this code..its looks like i cant find it anywhere in the code. the .jsp body <input type="button" name="btnSubmitCom" value="Submit"  class="button" onClick="submitPCApplicationComplete()"> the submitPC

  • Billing document Cancel related.

    Hi Gurus, While cancelling Billing document I am getting error, i.e,Data inconsistency during processing of document 0000######, So can anyone help me out regarding same? regards, DhirendrA.

  • Reports 10g Question

    Hello All, I am in the process of converting reports from 6i ti 10g. When I run my report in Web Layout nothing shows up. Is it an environment setup issue ? How do fix this issue ? Pls help... Thanks, Anna

  • Lost/forgotten administrator password

    I have just bought a new imac and given my old one to my son. He reinstalled Leopard and has got everything up and running but whenever it asks for the administrator name and password it doesn't accept anything we put in. We have tried my old name an

  • Material Master Extraction

    using below tables how to geterate a report SAP Tables: Table name     Description MARA     General Material Data MARC     Plant data MARD     Storage Location Data for Material MVKE     Sales Data for Material MAKT     Material Descriptions EKKO