Final Cut Pro X Export Help...

I have Final Cut Pro X 10.0.5 installed and I'm editing a video I made a while back; the RAW version I made was 700MB+ and the edited/exported version came out to 136MB (That I'm working on now) wants to be exorted as 441.4MB. I want to know how to get it exported as the same size it is now or smaller?? lol
Video Info:
Export Info:

BUMP!! lol
Also I'm on 10.8.1

Similar Messages

Final Cut Pro X Exporting help!?

I've used Final Cut Pro X before and had no problem sharing/exporting projects and burning them on the dvd's but now it won't work. Everytime I click export movie nothing happens. Or when I put share to DVD I get this error messege "The operation couldn't be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.) The properties info is 1920x1080 , 23.98p. Surround 48kHz. I don't file size is a problem I think it might have to do with having to compress it? I don't know. I use to be able to export it and then having it export on quicktime. I also select the project/timeline and still doesn't work.

Then obviously your problem is different from that of the original poster. Are you getting the CompressorKit error message?

Final Cut Pro X Export Speed Problems

I'm having problems getting any real processor speed out of my Final Cut Pro X exports. Whether I do a direct native Pro Res export straight from FCPX or send to compressor with the same settings, or even change them to H.264 or something else, i more often get processing that looks like the included picture, barely one processor being tapped. Sometimes ill get 50 percent which is probably all direct export is meant to use, seems like Qmaster distributed processing still doesn't work here. Once i get the file out and then bring that into Compressor 4 I get no issues, can get 50 percent with regular submit and full speed all cores running with Quickcluster submit. Any ideas why this is happening?
Just to be clear, these are native ProRes HQ clips, no effects, nothing, just selects I'm trying output, and since we can't do reference clips anymore, well....

TThe most common cause of this problem is that the media hasn't been imported properly and is still referencing a camera card or archive. If you press Cmd-E and no dialog appears, this can be one cause.
BTw, this is primarily a user to user forum, so no one here really cares if you go and use Premiere.

How do use the hum remover in final cut pro 5? Help

How do use the hum remover in final cut pro 5? Help!!

Simply drop the effect onto the appropriate audio track. Set the frequency for the hum frequency (50Hz or 60Hz depending on your power supply). Include whichever harmonics you think might be present eg. 100, 150, 200Hz.
Note that I have generally had more success by using Soundtrack Pro's noise removal tool.
Trevor

Final cut pro not exporting to youtube?

Final cut pro isnt exporting to youtube? why is this and what can i do to fix it?
Also says keyword: too_long ?

Isn't exporting to YouTube? Why? Can't see your computer. What's happening on it?
Are the keywords in the export tags too long?

How does final cut pro x export a file if it has not finished rendering?

How does final cut pro x export a file if it has not finished rendering?
So today I finished a project: Share >Export > as a pro res 422 and I'm now burning with iDVD as we speak. FCPX is still doing background rendering! I hope my DVD turns out ok....

You don't need to render before export.
Rendering is for playback.
If your project plays OK from the storyline, you can safely turn off rendering in preferences.
Andy

Final cut pro X export files bigger than originals

I got two WMV files, each file size about 500mbs, I converted them to mp4 using permute. Afther converting, each file size about 490mbs.
Then I open the mp4 files with final cut pro, I just want to mend the two clips together, it's that simple. I finish puting the clips adjacent to each other. Then hit export and chose encoding method .h264.
When final cut finished exporting, the movie is over 4GB in size.
Why is it so big ? the orginal files combined size is just about 1 GB.

File numer 1
format :H.264, 1,280 x 720 AAC, 48000 Hz, Stereo (L R)
FPS: 29.97
data size: 1.23 GB
data rate: 3.64 Mbit/s
current size: 1,280 × 720 pixels (Actual)
File number 2
format: H.264, 1,280 x 720 AAC, 48000 Hz, Stereo (L R)
FPS: 29.97
data size: 962.9 MB
data rate: 3.62 Mbit/s
current size: 1,280 × 720 pixels (Actual)
After putting two clips together in final cut pro and export with h.264 encoding
Format: H.264, 1,280 x 720 AAC, 48000 Hz, 5.1 (C L R Ls Rs LFE)
FPS: 29.97
data size: 4.3 GB
data rate: 7.10 Mbit/s
current size: 1,280 × 720 pixels (Actual)

Final Cut Pro X exports video clip as black

Hi Everyone,
I have a big problem, I'm trying to export a project with many HD clips, the first of which is the only one being shot as AVCHD on a Sony DSLR and converted to .mov by Voltaic HD because otherwise I can't import it in Final Cut Pro X. The rest of the clips are directly imported from another camera, no conversion.
The first clip (the one I had to convert) plays and gets edited fine within FCPX, but after I export the whole project, all the part that had that clip is just black picture with no sound. My titles, photos in the meantime are still there, but otherwise all black until the next clips show up.
The sources clips are hd1080p but I'm trying to export the project as 720p. My FCPX version is 10.0.9. I've edited videos from the same source and conversion before and never had this problem.
So now I just took the same single clip into a new project and exported it at 720p and there it just works fine ... Arrrghh!! How can I fix this?

I am having an almost identical problem:
Trying to export (doesn’t matter to what: Master File, Apple Device, etc. all lead to the same result) the project I am working on is producing a black screen with no audio (for the length of the project) – only the start and end titles get rendered.
The project plays fine in FCP X 10.0.9; the initial screen on the export dialog produces a correct looking screenshot (with both the picture and title visible), and predicts realistic sizes for the export file, which ends up being tiny by comparison.
Other projects with a similar workflow are exporting fine: basically I have shot a couple of concerts, and each project is one song with start and end credits and some color correction, stabilization, etc.
The source was 1080P video from a Canon SLR 5D Mark III, and it is being exported to 1080P -- however, I don't think that's relevant, because video from the same source to the same export files worked fine before - FCP X can obviously handle the format involved.
I tried deleting the FCP X preferences -- didn’t help. I had already tried deleting the render files.
Any ideas are greatly appreciated.

Final Cut Pro Render/ export crashes

hello everyone,
i've been working on a very lengthy project which i am trying to finish up on final cut pro 5 but the problem is final cut is being extremely difficult and will not get through rendering or exporting a single thing without crashing. i don't know if it's ridiculously poor programming or the lack of a plugin that might be the problem. the details are that i recorded myself drawing on photoshop using snapzpro with apple's animation codec and set everything up in pro so that my drawing is time-lapsed and all i have to do now is render and export. i rendered the project once before and it went fine overnight, but it failed to render the cropping i had put in so when i came to render it again and it does nothing but crash, sometimes at 2%, sometimes at 0%. That colour wheel starts turning and never stops (even 9 hours after leaving my macbook) and this even happens when i try to render 2 seconds worth of footage (force quit also says final cut is not responding). truth be told i am extremely frustrated with final cut right now and would appreciate any support i could get on how to get this god awful thing to just work.
i tried using fcp rescue and closing all unnecessary programs but nothing worked. i just don't get why it rendered the first time through and now decides to crash all the time.
plz help, and thx.

You have two problems.
1. As David noted, you are running a non compatible version (PPC) of Final Cut Pro on your intel machine. This is not supported and will cause all sorts of quirky behavior. The only way to solve this issue is to upgrade to a universal binary version.
2. The animation codec is intended as a means to transfer files between programs in a lossless manner. It is not intended to be edited on low power machines and CERTAINLY not on the system drive. Things may work better with an edit friendly codec.
As far as the general crashing, there is no telling at this point whether your files are simply corrupted, the preferences are corrupted, the non-intel nature of the program is causing the crashes as you stress the process during renders or what.
If it is a corrupted file - pay attention to where the render fails. THe files around that point are suspect.
If it is a corrupted pref file, use a program like FCP Rescue 5 to delete the FCP preference files.
Good luck.
x

Why won't Final Cut Pro X export in 1080P

I'm trying to export video in 1080P in Final Cut Pro X 10.1.4. Every time I click the share button it says I'm exporting in 720P. I tried to change it to 1080P and its greyed out. I even tried click share to Apple device in 1080P still 720. I verified all the clips are 1080P. I've never had this problem before its always just done it. Heres a screenshot of the share screen.

D-OH! Headslapper!
I have those. Every day. Thanks for posting your solution instead of just letting it go. Hardly anyone closes their threads around here and it really helps those who come after, those looking for similar issues.

I am a beginner at Final Cut Pro. Need help converting MPEG-2 to use.

I am a beginner at Final Cut Pro. I have mpeg-2 video footage that I am trying to import the footage into Final cut, but can't. I understand I need to convert the file format. I am unfamiliar with how to go about the converding file formats and the codec what is the best way to go about converting the file format so I can edit it on Final cut pro?

Where did the files originate? (How were they created?)
Some formats can be brought in with the help of plug-ins.
MPEG Streamclip can usually convert them to Quick Time.
Russ

Final Cut Pro X -- Export is Low Quality?

I'm wondering about some of the behavior on export with Final Cut Pro X.
While editing my videos, I set preferences to 'use proxy media' to make playback smoother.
However, when I go to export the video as a high-quality 1080p file it's clear that Final Cut is using the proxy files to make this video -- rather defeating the point of exporting at 1080p. Now, it's not a problem if I switch playback in preferences from 'use proxy media' to 'use high quality media' -- then the export is actually high quality.
My question is this: is final cut supposed to work this way? Why on Earth would it not default to use the highest quality files when exporting? It's not a huge deal, but it is annoying when I spend several hours exporting a project only to find out at the end that I accidently left playback on 'proxy media' and have to restart the process.

I've read a few threads on this issue. Are you using the share feature or exporting to compressor? My understanding is when you export you need to set to original or optimize setting in preference.
More about this topic here.
https://discussions.apple.com/thread/3166556?start=0&tstart=0

Final cut pro x export

On Final Cut Pro X 10.0.7, my export button is greyed out, so I can't export any of my projects. How can I fix this?

Figured it out. The share functions and controls were moved around from the last version I was using.

Final Cut Pro X export troubles: exports video with only half the audio.

Ever since I updated Final Cut Pro X, I've been having problems exporting. I either get error messages or the audio doesn't fully export. When I tried exporting a master file to my desktop, I got a message saying “error occurred when creating frame” then lists the frame number. Someone suggested copying the project file and pasting it into a new project. I did that, and it exported without the error popping up; but halfway through the video, the audio disappears, and does so in the same spot it disappeared in a previous youtube export before I tried the copy/paste method. I don't have the original footage; I'm making color correction changes to an edit; so I'm not sure if the second half of the video is somehow corrupted, don't know how to check that, and not sure what to do if it is.
Another suggestion given to me was to delete the event my footage is in, then create a new event, re-upload all the footage into that one, and relink my project files to it. He also said don't delete my event and project folder at the same time, which I'm not even sure how you simultaneously delete two things on a laptop. I don't understand how this method would work though, since deleting the event makes my project disappear since it has nothing to link to. I'm scared to try this method since I don't want to lose my work; I really don't want to color correct it all over again.
Is there any way to successfully export the file suitable for youtube posting, or is this a bug in the system they haven't fixed yet?

Just turned off background rendering.
I'm not certain what you mean for specs in a specific point in the video, but here are the specs for the entire edit I initially received:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,083
Size: 951,735,770 bytes (951.7 MB on disk)
Here are the specs for the exported video that has the audio issue:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,274
Size: 966,817,082 bytes (966.8 MB on disk)
The video is 10:28 minutes long and the audio leaves at 5:57.
If that wasn't what you were looking for, just let me know. I'm not very good with technical stuff sometimes so may have misunderstood.
Is there something I should have done to the piece before I began color correcting it, like transcoding?

Final Cut Pro 7 export drops frames

I exported a video from Final Cut Pro 7 to a Quicktime .mov file. The file plays fine on a mac, but when I try to play it on a pc it drops frames throughout the video. I have other .mov files on this pc also exported from fcp7 that play just fine. Please advise. Thanks.

If you are talking about the Canvas and Viewer windows... make sure that their size is set at FIT TO WINDOW Top left button in the viewer and canvas window.
If you are talking about something else, please give us some more details.
rh

Final Cut Pro X Export Help...

Similar Messages

Maybe you are looking for