Final Cut Pro X Export not working

Running Final Cut Version 10.0
Just upraded to OS X Mavricks.
Go to export project in Final Cut - nothing happens. It's as if I clicked on nothing. Tried using the shortcut command+E - also nothing.
Export Audio works but not Export Movie.
Tried exporting using Compressor but given that program is a $50 piece of garbage, that didnt work either.
What gives???

Ok, found it !
First of all, update FCPX. Then, you will not found your project. It's normal, it was my problem. But, the answer is just here: you need to udpate you file too. It's explained here: https://discussions.apple.com/message/24788882#24788882
Tell us if it's working.

Similar Messages

Final cut pro x dissolves not working

Final Cut Pro X, dissolves not working, When I use Ribbon, Heart ect, they showup on the video flickering, will not allow me to render the video, any help would be greatly appreciated.

Sorry. That should be what's the media? What are the project properties?

Final cut pro HD 2 not working with new updates

recently purchased a new imac. Most of my old programs were not supported. I updated to 10.9 from 10.5. Now, all the programs are running except Final Cut pro HD 2. I get a message sayin"power pc applications are no longer supported" Any suggestions? I read in an old discussion (from 2011) that I might need to download Rosetta?

MichelPM wrote:
... or you maybe able to run your version of Final Cut under virtualization software.
I do not know which version of FCP the OP is using as I do not recognize his designation of Final Cut Pro HD 2.
However, last weekend I attempted to install Final Cut Studio 2 (Final Cut Pro 6) into Snow Leopard installed in Parallels, as a test. It failed!
Final Cut's installer suggested the following problems: not enough VRAM - 64 needed; 0 present (even though Parallels is set for more than the minimum required VRAM); and a missing video card.
I attempted to work around this problem by using Pacifist to install FCS2, which worked, as far as the installation was completed. However, when I attemped to run FCS2, a dialog box came up with indicated that same two problems and then it quit.

Final Cut Pro 2nd monitor not working properly?

Been here before a long time ago, can't remember how it was resolved.
Working in a new edit suite, FCP Studio. Two new Samsung monitors (not my choice). I want one to be my playback monitor.
I set:
Final Cut Pro > Audio/Video Settings
> Digital Cinema Desktop Full Screen
> View > External Video > All Frames
But all I'm getting is a black frame on the 2nd monitor.
They've also got one of those very flat alluminum keyboards ... where F12 becomes a sound control. I'd love to know how I can change the function key to work as an FCP action / 2nd monitor toggling on and off.
That's two questions. Would be most appreciative of an answer for either.
Ben

Hey Andy,
I did the first half of your suggestion, but not the second half. Heading down to the studio this morning ... set up in a tiny white chapel looking out across the silvery North Atlantic ... and will try the second half of your suggestion. Will also see if there are two graphics cards installed in the Mac Pro. Will also check out the Window > Arrange in FCP (something I should have checked first off).
I talked to a filmmaker who previously worked on the system, only to discover he never uses the second monitor as a full screen, but rather as a large 'bin'. Interesting.
If worse comes to worse and I can't solve it I suspect I could size the canvas window to super large and drag it over to the second monitor.
Will post back when I've tried the latest suggestions ...
Thanks you mucho guys,
Ben

Final Cut Pro Trial does not work, drr nicht erkannt

Trial download answers with a mistake note "Final Cut Trial 10-0-3.drr nicht erkannt.
Was solll das, wenn schon die Trial Installation nicht funktioniert wie soll es dann das ganze Programm !??

eifelipad wrote:
No, I have everything required on the computer, but .. .
nope.
FCPX braucht 10.6.8 mindestens, lt Deinen specs fährst du noch 10.6.3

Final Cut Pro and Compressor not working

I know this has been asked before, but I didn't find a solution to my problem yet.
Ever since I upgraded to Mavericks, I can't export any movies.
I get the following message: The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
And when I send the movie to compressor, I get the video rendering error: 60.
I'm at a loss and would really apprecciate your help.
Thanks

It's probably the flux capacitor ... just give it a gentle but firm tap about 2 inches below the indent (just behid the mounting bracket) ... don't leave the tap on when you go out though or you will flood the bathroom.
Hope it helps
Andy

EOS MOVIE Plugin-E1 for Final Cut Pro Plug in not working?

Can anyone tell me the proper procedure for installing a plug in to FCP? Ive tried installing the above plug in, but when i goto log and transfer no thumbnails come up and nothing transfers?? Am i installing the plugin wrong, or is there an issue with the plug in??

This guy is having the same problem:
http://discussions.apple.com/thread.jspa?threadID=2491897&tstart=0

How does final cut pro x export a file if it has not finished rendering?

How does final cut pro x export a file if it has not finished rendering?
So today I finished a project: Share >Export > as a pro res 422 and I'm now burning with iDVD as we speak. FCPX is still doing background rendering! I hope my DVD turns out ok....

You don't need to render before export.
Rendering is for playback.
If your project plays OK from the storyline, you can safely turn off rendering in preferences.
Andy

Final Cut Pro X Export Speed Problems

I'm having problems getting any real processor speed out of my Final Cut Pro X exports. Whether I do a direct native Pro Res export straight from FCPX or send to compressor with the same settings, or even change them to H.264 or something else, i more often get processing that looks like the included picture, barely one processor being tapped. Sometimes ill get 50 percent which is probably all direct export is meant to use, seems like Qmaster distributed processing still doesn't work here. Once i get the file out and then bring that into Compressor 4 I get no issues, can get 50 percent with regular submit and full speed all cores running with Quickcluster submit. Any ideas why this is happening?
Just to be clear, these are native ProRes HQ clips, no effects, nothing, just selects I'm trying output, and since we can't do reference clips anymore, well....

TThe most common cause of this problem is that the media hasn't been imported properly and is still referencing a camera card or archive. If you press Cmd-E and no dialog appears, this can be one cause.
BTw, this is primarily a user to user forum, so no one here really cares if you go and use Premiere.

Will Final Cut Pro 4.5 still work if I upgrade to Mac OS X v10.5.4?

Will Final Cut Pro 4.5 still work if I upgrade to Mac OS X v10.5.4?

I'm with Jon on this one. I know someone who uses FCP 5.0 on a MacBook Pro, he has all sorts of wierd issues including:
Projects he has created throwing up an error message "Unreadable on this machine" when re-opened.
Projects losing and refusing to connect to render files.
Dissolves simply not working -this is not to do with lack of handles, it just happens.
LiveType and FCP's own title generator files not automatically compositing.
Lots of kernel panics and unexpected quits.
These might not happen all the time, but always crop up at the worst possible moment.
I can move his project files and media to my setup and everything works.

Send to - Final Cut Pro XML data not seeing my Color render

Sup folks,
As always I did some lurking on these boards and consulted the manual about this issue.
Nada.
I've rendered my shots. They were all queued. They were all rendered.
When I use the Send to -> Final Cut Pro command I get the "not all your clips were rendered" warning. I click yes to see what I will get.
FCP imports the XML data and I get nothing. All of the clips in my FCP timeline generated through the Send to -> Final Cut Pro command are all of my original media prior to my color workflow. Not my graded Color renders.
I did move my renders from a local drive to an external because of data capacity. After doing so I did update my Media, Render and Project paths to the new location of my media.
I thought that would fix my problem. It didnt.
So again: my issue is that even with my shots all rendered correctly (i checked them in QT) the XML being sent to FCP through the Send to -> Final Cut Pro command is not hooking up with my renders.
Deadline tomorrow.
As always,thanks for your time

I did move my renders from a local drive to an external because of data capacity. After doing so I did >update my Media, Render and Project paths to the new location of my media.
If I'm following the sequence correctly, you rendered your material to a local drive. Then you moved it, changed the paths (in COLOR), and then tried to "Send to... FCP". Is this correct? If so, doomed to failure. In your case, you may have even moved an empty folder.
There is an ironclad and non-negotiable series of events in rendering and initiating the roundtrip. Many users regard this as a "bug". One of the first things that a user should always do is set up all the target paths before even doing the first grade. But it is essential that the target render path be set up PRIOR to loading the Render Queue. COLOR creates the receiving folder at that time, and that is where the media will go no matter what you do after the RenderQueue is loaded. Change the path, change the format... change whatever you want... the deal has been done, and all will be ignored. However, once the media is rendered and you choose Send To... FCP, then the original XML that FCP sent will be modified by COLOR and passed back to Final Cut. COLOR does NOT,repeat, NOT generate EDLs, XMLs, or any of that stuff. It only modifies original lists. That you modified the Media, Render and Project paths (probably only in the User Preferences tab) is meaningless once the project has been rendered. The Render path for this individual project is determined in the Project Settings pane, along with the render dimensions and format. However, COLOR will observe a path change AFTER the render, and edits the XML re-export to try to find the media in the newly named directory. Of course, your media is actually elsewhere, and you get a blank sequence.
Lastly, make sure that you SAVE the project after renders, to retain the "rendered" clip status -- or COLOR won't remember any of this.
jPo

Final cut pro X export files bigger than originals

I got two WMV files, each file size about 500mbs, I converted them to mp4 using permute. Afther converting, each file size about 490mbs.
Then I open the mp4 files with final cut pro, I just want to mend the two clips together, it's that simple. I finish puting the clips adjacent to each other. Then hit export and chose encoding method .h264.
When final cut finished exporting, the movie is over 4GB in size.
Why is it so big ? the orginal files combined size is just about 1 GB.

File numer 1
format :H.264, 1,280 x 720 AAC, 48000 Hz, Stereo (L R)
FPS: 29.97
data size: 1.23 GB
data rate: 3.64 Mbit/s
current size: 1,280 × 720 pixels (Actual)
File number 2
format: H.264, 1,280 x 720 AAC, 48000 Hz, Stereo (L R)
FPS: 29.97
data size: 962.9 MB
data rate: 3.62 Mbit/s
current size: 1,280 × 720 pixels (Actual)
After putting two clips together in final cut pro and export with h.264 encoding
Format: H.264, 1,280 x 720 AAC, 48000 Hz, 5.1 (C L R Ls Rs LFE)
FPS: 29.97
data size: 4.3 GB
data rate: 7.10 Mbit/s
current size: 1,280 × 720 pixels (Actual)

Why Final Cut Pro Trial does not save works?

Hello, I downloaded the trial version of Final Cut Pro yesterday. Seems interesting, but does not save any work I do. Does this depend on the fact that it's a ''trial''? thanks (I use a MacBookPro3,1, with OS 10.6.8). Thanks

thanks Ian,
I discovered that the problem comes from a corruption of the desktop database, which I repaired with DiskWarrior. Unfortunately it occurred again, two more times and now, the third, this trick is not working. I realized the projecs files are saved in user>films>Final Cut Projects but I cant't find the way to make FCP recognize ad ''see'' them....

Final Cut Pro X -- Export is Low Quality?

I'm wondering about some of the behavior on export with Final Cut Pro X.
While editing my videos, I set preferences to 'use proxy media' to make playback smoother.
However, when I go to export the video as a high-quality 1080p file it's clear that Final Cut is using the proxy files to make this video -- rather defeating the point of exporting at 1080p. Now, it's not a problem if I switch playback in preferences from 'use proxy media' to 'use high quality media' -- then the export is actually high quality.
My question is this: is final cut supposed to work this way? Why on Earth would it not default to use the highest quality files when exporting? It's not a huge deal, but it is annoying when I spend several hours exporting a project only to find out at the end that I accidently left playback on 'proxy media' and have to restart the process.

I've read a few threads on this issue. Are you using the share feature or exporting to compressor? My understanding is when you export you need to set to original or optimize setting in preference.
More about this topic here.
https://discussions.apple.com/thread/3166556?start=0&tstart=0

Final Cut Pro X export troubles: exports video with only half the audio.

Ever since I updated Final Cut Pro X, I've been having problems exporting. I either get error messages or the audio doesn't fully export. When I tried exporting a master file to my desktop, I got a message saying “error occurred when creating frame” then lists the frame number. Someone suggested copying the project file and pasting it into a new project. I did that, and it exported without the error popping up; but halfway through the video, the audio disappears, and does so in the same spot it disappeared in a previous youtube export before I tried the copy/paste method. I don't have the original footage; I'm making color correction changes to an edit; so I'm not sure if the second half of the video is somehow corrupted, don't know how to check that, and not sure what to do if it is.
Another suggestion given to me was to delete the event my footage is in, then create a new event, re-upload all the footage into that one, and relink my project files to it. He also said don't delete my event and project folder at the same time, which I'm not even sure how you simultaneously delete two things on a laptop. I don't understand how this method would work though, since deleting the event makes my project disappear since it has nothing to link to. I'm scared to try this method since I don't want to lose my work; I really don't want to color correct it all over again.
Is there any way to successfully export the file suitable for youtube posting, or is this a bug in the system they haven't fixed yet?

Just turned off background rendering.
I'm not certain what you mean for specs in a specific point in the video, but here are the specs for the entire edit I initially received:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,083
Size: 951,735,770 bytes (951.7 MB on disk)
Here are the specs for the exported video that has the audio issue:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,274
Size: 966,817,082 bytes (966.8 MB on disk)
The video is 10:28 minutes long and the audio leaves at 5:57.
If that wasn't what you were looking for, just let me know. I'm not very good with technical stuff sometimes so may have misunderstood.
Is there something I should have done to the piece before I began color correcting it, like transcoding?

Final Cut Pro X Export not working

Similar Messages

Maybe you are looking for