Final Cut Pro X not recognizing external hard drive

I'm trying to create a new event in FCPX and the drop down options on the side of where I want to save is not showing my external hard drive. I have used other external hard drives in the past and it works just fine.

Yeah I know but here is what´s happening step by step:
This is when I open it:
And then this:
Here you can see that the ext disk is showing in fcpx. But after 2 sec or so a loadbar pops up...
And then there is nothing to select. Only the internal drive. I do not understand it.
It´s never been like this before. But I tried a different harddrive (Lacie Rugged) and that was ok. So it´s only the main project disk(the mother, lacie blade runner) that fail to show inside fcpx.

Similar Messages

How do I import an iMovie HD project to my new Final Cut Pro X from an external hard drive?

how do I import an iMovie HD project to my new Final Cut Pro X from an external hard drive?

Any replies to this one? Anyone????

Final Cut Pro 7 not recognizing Sony HDV Deck on older 2008 version MacPro's

I am trying to connect a Sony HDV deck to Final Cut Pro version 7 on an older 2008 version MacPro. The problem was with the firewire mini port on the back i believe because i used a different deck which was the same model - but the only difference was it had a firewire 400 port instead of mini firewire port. Anyway, the deck with the 400 firewire port worked for logging and capturing, etc... (this also worked when i re-tested it on the 2008 MacPro) Im wondering if anyone else has had problems with the firewire mini port on the Sony HDV deck because it seems like almost every HDV deck i have with mini firewire has problems connecting to final cut pro or any editing application. I know now that the deck i had in question the mini port is not working correctly but is there a way to fix this or prevent the cable - deck from terminating the connection with the mini cable being used. I dont need an answer to the deck problem because i figured it out but just wondering if anyone has some insight on this deck problem. Thank you...
Kyle

>I dont need an answer to the deck problem ... just wondering if anyone has some insight on this deck problem
So you don't want an answer, just insight. OK, I'll give it a go. I've had several Sony VTRs with the 4pin Firewire port (proper name for what you refer to as "mini"), which is the same type of port that most DV and HDV cameras use as well. One of the main things you need to be wary of is plugging in and unplugging a Firewire cable while either the device or the computer is powered on. I know that marketing hype claims that Firewire is hot swap-able, but it really isn't safe to do so. The pins in both the 4 pin connector as well as the 6 pin connectors are very close together and if they aren't aligned exactly right with the socket, can easily cause arching and damage a Firewire port on either or both ends. Is that the kind of insight you were looking for?
-DH

Not Recognizing External Hard Drive Mac Book Pro

Good Day!
I have a 2010 Mac Book Pro that I just downloaded the neww OS X Lion for the upgrades ext... I haven't had any other problems exept that before I downloaded the Lion my Mac would recognize my external hard drive (WD passport). And now it doesn't, I even go to the finder and it doesn't even show up under "computer" to make sure there isn't anything wrong with my external hard drive I plugged it into another mac that doesn't have Lion and it would work. Please Help because my external drive has everything 1TG of everything...
Thanks!!!

Hi,
I had already checked in Finder's Pref's for the check mark for External Disks and it is checked. That is for external disks to show up on your desk top.
So still no luck for my Mac to reconize my external hard drive with this new OS X Lion Program. Should I just take my computer into the apple store?
Thank you!!

MacBook not recognizing external hard drive

After months with no problem, my MacBook Pro is not recognizing my external hard drive (USB3.0) as my time machine backup. Yet, when I enter time machine, the backups appear.

Thank u! it worked
Cheers!

Mac Not Recognizing External Hard Drive, I Want to Use the HDD to boot Windows

Let's get this stuff straight first:
The Hard Drive is from a PC that I am not using
The Hard Drive already has Windows 8.1 installed as well as all my documents and data. (from the old PC, of course.)
It does work, however after connecting it to my iMac (late 2014 / 5K Retina) it isn't recognized by Finder, Disk Utility or the (Option) Boot screen.
Yes, I understand I will need to install drivers, so I'll need help doing that as soon as we get Yosemite to recognize the HDD.
What I am wanting to do is use this external drive to run Windows from the boot up screen. But I need OS X to actually recognize the drive in the first place. Then I'll need a little help installing the drivers for Windows onto the Drive, unless those are already installed, since it was originally used in my PC? (I'm not sure how drivers work.)
Nonetheless, if it's not possible to be used as an external boot for Windows, I'd still like to use it to obtain and store files/documents on.
Thanks guys!
-Austin

How do you have the drive hooked up to your computer? Did you but an adapter? If so, is it one that is supposed to work with a Mac? Did it come with a power supply?
Some of those USB adapters don't work well with Macs and that could be causing problems. Test it on a PC if possible, just to make sure the adapter itself isn't bad.
~Lyssa

All final cut events, projects disappeared from external hard drive

I had a re-start this morning and the event I was working on lost its purple box and its white star. Can't find the project, can't find the event.
Even more troubling, the Final Cut Events and Library folders on my external hard drive is also gone. Really need some help here. Any ideas?

It almost looks like all of the original media is gone.

Itunes not recognizing external hard drive

I have a smartdisc firelite external hard drive that was working perfectly until yesterday when I bought a shuffle and now itunes is not recognizing to go the hard drive to locate the songs. Can someone walk me threw this so I can download some songs from my external drive to itunes and then to the shuffle ? Thank you so much

†ry the refresh script from here http://ottodestruct.com/blog/2005/10/20/itunes-javascripts/

CS2 not recognizing external hard drive as a scratch disk

I have an external hard drive that I want to use as a scratch disk but while I can navigate to have Photoshop open files from the drive, when I go to my prefs and try and select it as a scratch disk, it's not listed as an option - i.e. Photoshop only shows "start up" and "Mac Hard Drive" as choices. But when I go in that same dialogue box, and look for an additional plug-ins folder, I can navigate to the external drive. It's also doing the same thing for a thumb drive I have and two other external hard drives which mount fine.
I have restarted the program, removed the Prefs file, and restarted the program again but it still doesn't see any of the external hard drives.
Any ideas?

mike,
Most drives are not optimized for Mac as purchased. Unless marked otherwise, consider that every drive you acquire, whether a fast-spinning hard drive or USB flash drive comes formatted as FAT so it can be recognized and used by both Macs and Windows machines. Use Disk Utility and reformat it as HFS+ "Mac OS Extended (Journaled)".
Just be aware that if you are reformatting your existing drives, you need to back up your data first or it'll be gone forever.
Neil

Not recognizing external hard drive

When I first bought my SimpleTech 320GB external hard drive, it did work. It connected and updated everything through Time Machine. After about, a month, it just did not show up in my Devices or on my Desktop.
I've tried everything. I went to the SimpleTech site and they said to put it in the direct USB port (which I have been doing). I've tried both USB ports and even got a new USB cord and it's not working.
If anyone has some suggestions, please send them my way. I'm in dire need of some space on this thing so I can install some updates.
Message was edited by: lisuhhx

I am having this same problem all of a sudden. My external hd shows up in disk utility; however, it does not show up under devices or is it recognized any more by time machine. When I try and repair it, the repair fails and list a "invalid node structure" and "volume check failed". I disconnect the external hd's power source and firewire connection, reconnected, and this did nothing.
Any suggestions would be greatly appreciated. Thank you.

IMac Not Recognizing External Hard Drive

Hi friends,
I recently upgraded my MacBook from 5 years ago to the newest iMac. In doing so, I transferred my computer using Time Machine & my external hard drive. The hard drive is partitioned to allow for storage as well as Time Machine backups. I plugged my external hard drive into a PC to try to access these files and it didn't recognize the hard drive, so I didn't think anything of it and unplugged it.
Now I can't get my iMac to recognize the hard drive at all. I have gone into Disk Utilities to see if it's listed there, but nothing. It usually makes a lot of noise when it's first plugged in (whirring and sounding like it's about to take flight, etc.) but no sound today. However, the white light that indicates it's on is lit. This could be due to being plugged into the wall, however, and not having to do with being plugged into the computer. (This is a decently old hard drive in terms of technology, probably 4 years.)
I should have known better than to infect my hard drive with PC cooties. But that wouldn't have wiped everything clean, right? I'm wondering if my hard drive just happened to bite the dust coincidentally around this brush with fate.
Does this sound like something that is wrong with my hard drive, or with the connection? Any help would be greatly appreciated as I have quite a few files I would hate to lose on the hard drive.
Thanks!

Zap the PRAM and Reset the SMC; then, hook up the ext HD, fire it up, and see if that fixes things.

Not recognizing external hard drive after upgrading to mountain lion

I recently upgraded to mountain lion. While my external hard drive originally showed on the desktop it does not anymore, The hard drive is partitioned between my wife (laptop) and my desktop. My wife's part does show on the desktop but mine does not. From reading some of the issues on the Support Community I did a disk repair as it does show up under disk utility. Although the disk repair was performed successfully, it still does not appear. I read some other comments about Fuse but I don't understand what this is about. Any suggestions to get my external hard drive back so I can keep my computer backed up. Thanks.

It is powered (the light is on). I was uploading photos from the drive yesterday, so it worked perfectly fine before the upgrade to 10.6.8 (which I did during the night). Is there anything else to try before I move it to another computer to see if it works? Again, thanks.

Mac Pro 2008 Not Recognizing SATA Hard Drives After Power Failure...

So we recently had a weird power "outage" where the power still seemed to be surging some (my monitor was blinking wouldn't turn completely off until I yanked the plug on it), and to my dismay, when the power came back on, I started having boot issues with my Mac. Luckily I had a couple of identical dual-quad core machines sitting around (workgroup environment), swapped my hard drive into one of them, and was back in business on-the-fly.
However, I'm now trying to troubleshoot the faulty machine (qihout throwing parts at it yet) and am stuck at an impasse. With the hard drive of the secondary machine cross-installed into the one that got "hit" by the outage, I simply got the chime and then it stuck on the dreaded gray screen, and out of all the boot options, the only one that would get me a different result was to try to option-boot into the Startup Manager, which would still give me the gray screen but also a mouse cursor after about a minute. Zapped PRAM... reset SMU... even swapped CMOS battery... all to no avail.
So I started yanking things. Memory.. video card... and finally the one and only (swapped) hard drive. The last one did it, and I was finally able to option-boot, start up from the Installation CD, and ultimately, D-boot into the hardware tests on the CD. Ran both normal and extended tests and everything checked out fine, with no errors (and based on the potetnial error messgaes I read about, these tests check everything from the logic board to the power supply, and voltage across both).
Now I'm torn and not sure which route to go from here. Machine seems to operate relatively normally when booting from CD... all hardware tests pass... Super Drive works (not sure it that's SATA or PATA, but guessing the latter at this point)... it just won't take a hard drive (which I verified is fine in another computer), regardless of which of the 4 bays I put it in. I'm also hard presed to believe that the power outage/surges caused the SATA cable(s) to go bad yet nothing else, which still have me leaning towards SATA controller on the board or a power supply issue despite the fact the tests passed.
Thoughts, opinions, or comments... from experience or otherwise? Thanks in advance!

Look hatter. I'm not saying it doesn't, but "prevention" is not why I started the thread. It was to troubleshoot the already existing problem, and you suggesting I run out and drop a combined $1000 on UPS units for each of the five 2008 Mac Pros I still have in my department is neither contributory to the thread topic nor cost-effective just to (possibly) prevent another (what seems to now be) $10 cable issue yet another 6 years down the road. Thanks, though. :/
Well it wasn't the power supply, nor apparently the SATA controller (I don't believe at this point). I finally got the hard drive to recognize and boot again, but ended up having to use one of the two extra SATA connector ports on the board (which I can only assume are handled by the onboard SATA controller as well) and a 4-pin molex to SATA power adapter connected to the power output for the secondary optical drive. As such, It very well may just be the "Hard Drive Harness Cable", although I need to order a male to female SATA extension cable so I can hook the drive up directly to the data side of that the drive bay connectors to determine whether it's the data side or the power side causing issues. I'm again assuming power, since the extra SATA ports seem to work, I'm pretty sure the drive isn't spinning up fully, yet the bays obviously 'recognize' there's a drive in there (thus the gray screen when one is plugged in).
Anyway - I'll update when I get to that point, primarily for posterity's sake, as I found several "unresolved" gray screen threads on the web (and even in these forums) that sounded just like mine yet offered little ultimate help. In the meantime, does anyone want to speculate on whether it's the cable itself or maybe the SATA chain power plug on the board could be bad? It looks to be pretty close to the main power input connector on the board, so just wondering if (worst case scenario) something could have popped on the board between the two? Seems unlikely, but...
Either way, I can always work around it all if necessary by utilizing the same setup I got it to boot with.

How should I move all of my Final Cut Pro files to an external drive?

My MacBook Pro doesn't have enough space to hold all of my Final Cut Pro X files (my internal hard drive is only 120GB), and I bought an external hard drive that has 120GB capacity too but want to move all of my FCP files to that drive. What exactly should I be moving? Do I move the application itself? And how do I tell FCP where to find all of my media? Sorry if it seems like a stupid question, I'm relatively new to Macs.
Thanks!

The application remains in the Applications folder.
The best way is to copy the projects by duplicating them to the new drive. Do that from inside the application. Duplicate the projects with all referenced events. When all the projects and media have been copied and are working correctly then you can delete them from your internal drive.
Caution: make sure the media is actually in the events you're duplicating. If not, use the organize events function, or you will lose the media.

Can not get external hard drives to connect to my computer 17" Mac book Pro 10.7.5

can not get external hard drives to connect to my computer I am using a 17" Mac book Pro 10.7.5.
I have 2 iomegas and 1 LaCie. Changed cables. I can feel the external hard drives running and
I can hear them running but I can not get them on the computer any more. They did work at one time.
Can any one PLEASE help?

Nothing appear on my desktop.
I did Repair and Verify the HDDs in Disk Utility>First Aid from the
Utilites App about a dozen times ans they all said everything was good
except for the last time there were erors found and I ran the
Disk Utility from the Start Up Disk and the repairs were made and everything
was subposed to te good and still Nothing on the desk top.
Ginger

Final Cut Pro X not recognizing external hard drive

Similar Messages

Maybe you are looking for