Final Cut Pro X problems since updating to Yosemite

F C P X works the same as it did with M L OS. I ran into a problem when I went to Share with a Blue Ray Recorder. It Transcoded fine until it gets to 66% then it stops. I tried several times with same results. I have a Wedding completely done with now way to burn to DVD BR. Any thoughts?

Try Here:
Re: Blu-Ray burning error after Final Cut Pro 10.1.2 update.
Al

Similar Messages

  • Final Cut Pro 5.1.3 Update now in Software Update

    New in Final Cut Pro 5.1.3 Update
    Final Cut Pro 5.1.3 provides important bug fixes. This update is recommended for all Final Cut Pro 5.1, 5.1.1, and 5.1.2 customers.

    We are seeing an incompatibility here with our Pro Import FCP plug-in, something changed in the new release.
    If you are using Pro Import FCP we recommend you not update to 5.1.3 at this time. We'll update our web site when a solution is found.
    http://www.automaticduck.com/support/blog/

  • Final Cut Pro 10.1.2 update problem: shared items all deleted.

    I upgraded from Final Cut Pro 10.1.1 today to 10.1.2. I've been working with 10.1.1 for a few weeks without problems and sharing videos. After the upgrade to 10.1.2 all the shared items that had been held within the "Shared items" folders have vanished and I cannot find them anywhere! Has anyone else had this problem?

    Blow Creative wrote:
    Sounds like a rudimentary question but how do you roll back to teh previous version?
    You would need to restore from a system back-up.
    Blow Creative wrote:
    Final Cut automatically updated on our video iMac overnight and now keeps bombing whenever we attempt to do access any files.
    Change your App Store Preferences so that you make the decision about what gets updated and when.
    Russ

  • Final Cut Pro color problem

    So I just got myself a new 24' LED monitor for my home edit suite, and I have been very pleased with it.  I just happened to open FCP to see adjust my workspace for the bigger setup, and I noticed a strange problem.  In FCP, the viewer and the canvas look very dark, like the brightness is turned down.  It also looks that way on my laptop monitor, which has always been my second edit monitor. 
    However, my project exports look nothing like that on the same monitor.  I thought perhaps the monitor wasn't calibrated properly, but the Quicktimes look fine.  I've attached a screen shot of the problem.  The image on top is the Quicktime, and the image on the bottom is the FCP canvas.  What's happened to my FCP?  Is it some sort of color profile or does it have to do with the resolution?  Is it a FCP setting or a monitor setting?  I don't understand why it changed how it looked on my laptop monitor, since nothing changed with it.  Any insight would be fantastic!
    Thanks

    I believe this is the difference between  broadcast gamma output via something like a AJA KONA card and a regular monitor gamma. Go into Final Cut Pro- System Settings and select the Playback control tab. Change the Gamma Correction from "Accurate" to "Approximate"
    When you reset this you can then start to calibrate your monitor. Without that gamma setting changed you can crank all of your monitor settings to maximun brightness and you'll never ever see the pluge on your color bars.
    Good Luck,
    je

  • Annoyed with JVC/Final Cut Pro import problem; will they ever fix this?

    Annoyed with Final Cut Pro JVC import problem; will they ever fix this?
    I've shot footage on JVC GY-HD111E in the UK in 720p/25p PAL mode.
    I'm trying to import lots of short clips (average 10 seconds) into Final Cut Pro (latest version with 720p/25p support) with a new Mac Pro maxed out with ram and 3 extra internal HDs.
    Problem is, on a scene-break i.e. pause/stop, Final Cut detects this and creates a new clip, but it takes about 5 seconds to 'searching for media" before it starts the new clip. Because some clips are only very short, this 5 second delay sometimes means I only get the final few frames of a clip, rather than the entire 5 seconds or so of it.
    JVC UK are blaming Apple and are saying it is up to them to fix it as Premiere and Edius does not have this problem.
    However, Symbiosis in the UK (who do HD-Connect box) say that the JVC ProHD cameras do not wrap the shots up properly at the end, they are kind of left open and this creates problems on scene-breaks.
    I've tried turning off the "create new clip on timecode break" etc, but it does not make any difference, when I do this it simply quits capturing on a scene break. Besides I have about 300 cutaways like this and I don't want to spend the rest of the year breaking them up on the timeline as this would be a futile and long workflow.
    I'm importing and working on a native HDV 720p/25p timeline and this is the way I want to work. I've already imported and edited 4 hours of footage, but these 4 hours were easy as all 4 tapes had no start/stop points, they were recorded continuously from beginning to end of tape for 64 minutes each time so importing was no problem; 1 clip per tape.
    But now I've come to my 5 tapes containing hundreds of cutaways I'm kind of screwed and need some advise on how I can import them natively in HDV without losing this 5 seconds off the beginning of each clip whilst FCP searches for the media each time.
    I've been told this issue is definately with FCP, any ideas how I can get around this?

    I haven't heard of this JVC/FCP problem, so I can't comment on it. However, whoever shot the cutaways didn't do you, the editor, any favors.
    I've been doing video since 1984, and I've got to say, anyone who shoots a scene that is only 5 or 6 seconds long on tape is making a huge mistake, and it's been that way since the beginning of computerized editing in the late 70s.
    Shoot at least 5 seconds of pre-roll before the shot begins, then roll tape for at least 5 seconds after you've got the shot. That's the protocol I've followed for 22 years now. Tape is cheap, edit suite time isn't.
    But laying down only 5 to 6 seconds for a scene is wrong, IMO.

  • Final Cut Pro 4:  Problems exporting video using QuickTime conversion

    just recently updated my Mac to version 10.4.11 -
    Ever since, Final Cut Pro won't let me Export my video using QuickTime Conversion.
    Its starts exporting, then freezes at 79%. A general error message pops up.
    I know its not a space issue, because I have 20GB left and the video i'm exporting is only 2 GB.
    I installed all the software updates.
    Can anyone help? Do I need a new version of Final Cut?

    1) this is the final cut express forum not the pro.
    2) 10.4.6 is not the latest, try updating to 10.4.11
    3) after any system update you must run disk utility to repair permissions or errors that may not have been addressed during the upgrade process.
    4) have you tried exporting as a reference movie then playing it in qtpro, if ok then export.
    5) what are you trying to export too?

  • Final Cut Pro 7: problem creating Blu Ray disc

    Hello, I've a problem using FInal Cut Pro 7. I want to create a Blu Ray disc using the "Share" function, but during the process - after many hours - appears this warning message: "SHARE WARNING - NSEXPETION RAISED BY 'NSPORT TIMEOUT EXCEPTION' REASON = CONNECTION TIMEOUT: DID NOT RECEIVE REPLY". Someone can help me? What does it mean? Thanks! P.S. Duration of my film (in the timeline): 35 minutes.

    Yes. It will only burn Blu-Ray if it is the Pro version though.
    Compressor will also burn the Blu-Ray if you set it up to do so:
    http://documentation.apple.com/en/compressor/usermanual/index.html#chapter=25%26 section=3%26tasks=true

  • Final cut pro 5.0.4 update (need to update for job)

    im probably the one person in the company to still run 5.0.4 instead of 5.1.1, mostly because im never given an option for notified to update.
    I have Final Cut Pro 5.0.4, not sure if i registered it. The popup comes up once in awhile, but hasnt lately. Usually hit "Ask Later" or whatever.
    Anyways im unable to open footage because the file format is too new to read for my fcp version. I downloaded "FinalCutProUpdate5.1.1.pkg", but it only updates 5.1.1 versions... I need to get my version of 5.0.4 updated to 5.1.1 so I can continue working without much loss.

    yes you need to pay for the crossgrade
    go to http://www.apple.com/universal/crossgrade/ and look at your options
    DAVE

  • Final Cut Pro 5.1.4 Update

    Final Cut Pro 5.1.4 provides important bug fixes to resolve plugin issues . This update is recommended for all Final Cut Pro 5.1, 5.1.1, 5.1.2 and 5.1.3 customers.
    FXplug fixed?
    Remember to backup your current working version first.
    NO new info about this 5.1.4 here yet:
    Late-Breaking News About Final Cut Pro 5
    http://manuals.info.apple.com/en/FinalCut_Pro_5.0_lbnz.pdf

    Late-Breaking News About Final Cut Pro 5.1.4:
    http://manuals.info.apple.com/en/FinalCut_Pro_5.0_lbnz.pdf
    FxPlug Plug-ins with Custom User Interface Elements:
    FxPlug plug-ins that have custom user interface elements now work as expected.
    Importing XML Files:
    Importing XML files with missing <pathurl> elements now works as expected.
    G5 1.8 DP (PCI-X)   Mac OS X (10.4.8)   ATI X800 XT, 4GB RAM, 20" & 23" ACDs, M-Audio Revolution 5.1, Fostex D15 DAT

  • Final Cut Pro 5, problems with switching between HDV and DV

    I recorded a movie in HDV 1080i50 and captured it into Final Cut Pro 5. I think the capture was done correctly (but the video was captured by another person), with Easy Setup on HDV 1080i50 and the camera set on HDV 1080i.
    The sequence in which I edited the movie had its settings on DV PAl which was necesary for me to export the video for DVD. Of course I had to render the clips many times in the DV mode. Later I wanted to export the movie to tape in the original HDV format so I changed the sequence settings to HDV 1080i50.
    There I encountered a problem. The frame became very small while the aspect ratio was huge (1920x1080) and it didn´t matter though I copied the clips to a new sequence (with its settings on HDV).
    Does anybody know why this occurres? Is it possible that the frame size distorts if I change the sequence settings from HDV to DV and again to HDV? Because I have also tried to put the original audio/video files into a new HDV sequence and there the frames dimensions are correct.
    Best regards - Einar Hjartarson
    www.gagnvirkni.is

    I think your workflow is completely wrong.
    Edit in whatever codec the footage is, then export via
    Compressor > Advanced Format Conversion
    It's that simple.
    You can't just change your sequence settings to whatever you want the footage to be.
    Andy

  • Is there a way to export a final cut pro 10 project without updating the software to 10.1

    I need help exporting a project i created on final cut pro 10, but it keeps saying i need to update to 10.1. To update the software, i need 4GB but my mac book pro only has 2GB

    Well it's probably time to do some house/computer cleaning.
    You need to clear space and maybe get a large fast external drive for media storage.
    Try turning off auto updating in System Preferenses>Software Update.
    Al

  • Final cut pro 10.1.2 Update - Color Correction / Grading Not Exporting

    Hi guys
    Since upgrading to Final Cut Pro 10.1.2, the software is working almost perfectly fine, but when exporting movies - whether I export them as h264, iTunes or directly to YouTube - they do not export with the colour corrections I applied to different shots. Does anyone know a way around this?
    Best wishes and I look forward to hearing from you.
    Shai

    Thanks Tom
    Here's a screenshot of what the Quicktime file looks like compared to the fcp movie. There are a couple of shots where the color correction stays intact, but for the majority, the export seems to ignore it completely. Very strange.

  • Hi, i've made a video in final cut pro, the problem is that when i export it not the entire video is played, just the first 3 seconds

    i made a video in final cut pro x. The entire thing isn't that long, however when it comes to sharing it only the very first few seconds are playe.
    Thanks,
    Jamie

    see where the clip ends and then the timeline becomes black? when i add on an extra clip that line thing with the arrow does not move and if i try to export the video not all of it is played, just till that arrow.

  • Final cut pro HD 4.5 update for universal version

    Hi.
    I am not sure of which product upgrae I have to buy to run my final cut pro 4.5 on intel core duo processor. The one just name: Final cut pro HD upgrade.. ?
    thank you
    Maxime

    You need the crossgrade - and hurry, it's going to expire soon!
    http://www.apple.com/universal/crossgrade/

  • Final Cut Pro X problem

    final cut pro x doesn't open my final cut pro files?
    Does anyone know how I can fix this?

    FCPX cannot open legacy FCP projects, if that's what you mean. There us no fix. The applications are entirely separate.

Maybe you are looking for